trinityboringsolutions.com

McQueeney Texas Directional Boring: Lewisville Silty Clay, FM 725 and Guadalupe River

Quick Answer: Can we bore beneath a McQueeney road, track or creek without cutting the surface? We do directional boring, also called horizontal directional drilling (HDD), for crossings such as FM 725 in McQueeney. The Yukon main office is 469 road miles away, and a bore near Terminal Loop Road needs that travel considered in planning. Lewisville silty clay is common here, so sticky cuttings and clay that grips pipe call for careful fluid and reaming choices. Guadalupe River crossings need a route planned around the channel.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

McQueeney bores at a glance

  • Unincorporated community in Guadalupe County, Texas. Population 2,397 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 469 miles, about 8.8 hours of driving.
  • Ground: Lewisville soil is mapped on 28 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 3 percent of the area.
  • Highways inside the boundary: FM 725 and FM 78. State permit office: TxDOT San Antonio District.
  • Railroad track inside the boundary: Union Pacific, with 7 mapped street and rail crossings.
  • Named streams inside the boundary: Guadalupe River, Youngs Creek and Long Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring under FM 725 in McQueeney?

Can we bore beneath a McQueeney road, track or creek without cutting the surface? We take directional boring work in McQueeney, an unincorporated community in Guadalupe County. The Census Bureau counted 2,397 people here in 2020. A water or sewer line can run beneath FM 725, while electric conduit or fiber can be routed under a Terminal Loop Road driveway without an open cut.

Our main office is in Yukon, Oklahoma, and McQueeney work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We began directional boring in 1982. More than four decades of work helps us plan for mapped Lewisville silty clay, which can ball on a reamer and grip pipe if the hole sits open too long.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What does the Lewisville soil survey show beneath McQueeney?

The USDA soil survey maps Lewisville soil across 28 percent of McQueeney, with Sunev at 27 percent. The surface texture is silty clay across 30 percent and clay across 26 percent of the mapped community. At about 40 inches below the surface, clay is mapped across 31 percent and silty clay across 29 percent; average clay content at that depth is 40 percent. We treat mapped patterns beneath McQueeney as planning context, not test borings, before setting a boring route. For a bore near FM 725, the sticky ground can load a reamer and hold tight around pipe, so the drilling plan matters.

USDA soil survey, inside the McQueeney mapped community boundaryWhat is mapped
Soil series mappedLewisville 28 percent, Sunev 27 percent, Branyon 9 percent, Tinn 7 percent and Houston Black 6 percent
Texture at the surfacesilty clay 30 percent, loam 28 percent and clay 26 percent
Texture about 40 inches downclay 31 percent, silty clay 29 percent and loam 28 percent
Engineering class about 40 inches downlean clay (CL) 53 percent and fat clay (CH) 38 percent
Average clay content about 40 inches down40 percent
Bedrock mapped within 60 inches3 percent of the area (0 percent hard rock, 3 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils10 percent of the area
High corrosion risk for uncoated steel60 percent of the area

Bedrock is not mapped in the top five feet across most of McQueeney, though it is mapped within 60 inches in 3 percent of the area. The USDA geologic map includes Alluvium, undivided, of Cenozoic age, and Late Cretaceous sedimentary material described as sand, chalk and mud. No seasonal water table is mapped within 60 inches, while flood prone soils cover 10 percent. High steel corrosion risk is mapped across 60 percent, so the line owner should consider casing and tracer wire materials; HDPE is not affected by that soil corrosion concern.

How do crews bore through McQueeney clay?

Lewisville silty clay and the mapped 40 percent average clay content mean a bore near FM 725 can get sticky. We adjust fluid and reaming to keep the hole manageable and the pipe moving.

  1. At a Lewisville soil site, we use a thinner drilling fluid and polymer, then ream in stages so sticky clay does not load the reamer.
  2. Where heavy clay is mapped near FM 725, we watch fluid returns and control pressure to reduce the chance of lifting pavement.
  3. Before drilling near a marked utility on Terminal Loop Road, we hydrovac pothole it because surface paint shows location, not depth.
  4. Along the Guadalupe River, we plan depth below the channel and check Corps jurisdiction during planning; pits stay in the dirt on each bank.
Open bore pit in red Oklahoma dirt with white PVC conduit stub ups and an orange safety barrier
An open bore pit in red Oklahoma dirt with PVC conduit stubbed up and a safety barrier around it.

Where might a McQueeney line cross the Guadalupe River?

FM 725 and FM 78 run inside the mapped McQueeney community boundary. Interstate 10 touches the boundary, while Texas State Highway 46 and US 90 are nearby. A bore beneath an existing highway keeps pavement intact. Terminal Loop Road is the longest named street, followed by Short Cut Road and Woodlake Drive. Those routes help define where a water service, sewer line or fiber conduit could need a bore rather than an open cut.

CrossingTypeMapped extentWho has a say
FM 725State highway4.3 roadway miles insideState highway office
FM 78State highway2.1 roadway miles insideState highway office
Interstate 10Highway nearbyRuns along or touches the city limitsState highway office
Texas State Highway 46Highway nearby0.4 miles outsideState highway office
US 90Highway nearby0.5 miles outsideState highway office
US 90 AlternateHighway nearby1.5 miles outsideState highway office
Union PacificRailroad2.97 track miles insideThe railroad
Guadalupe RiverStream6.01 channel miles insideChecked for Corps of Engineers jurisdiction
Youngs CreekStream3.24 channel miles insideChecked for Corps of Engineers jurisdiction
Long CreekStream0.1 channel miles insideChecked for Corps of Engineers jurisdiction
Deadman CreekStream nearby0.9 miles outsideChecked for Corps of Engineers jurisdiction
Lake Mc QueeneyLake or pond264 acres, insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 2.97 track miles inside McQueeney, and 7 mapped street and rail crossings create places where a proposed route may meet the track. A crossing under the Union Pacific line needs the railroad’s agreement. Guadalupe River has 6.01 channel miles here, and Youngs Creek has 3.24; 5 street crossings of named streams are mapped. Lake Mc Queeney is also inside the community boundary, so a water crossing needs review during planning.

Do I need a permit for a McQueeney bore in Guadalupe County?

McQueeney has no city government, so streets and permits fall to Guadalupe County or the state, depending on the route. A bore in FM 725, FM 78, Interstate 10, Texas State Highway 46 or US 90 right of way needs a TxDOT utility permit. For a McQueeney highway crossing, we account for TxDOT San Antonio District review when planning the boring route and schedule. The utility owner files through TxDOT’s online RULIS system; we prepare the bore plan and profile and work under the owner’s permit. TxDOT cover requirements set depth, including 60 inches for electric and communication lines at highway crossings and 60 inches for water lines. A Union Pacific crossing also needs its railroad agreement, and Guadalupe River or creek crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns lines in the ground in McQueeney, Guadalupe County?

The water provider for a specific McQueeney address has to be confirmed with the city, the county or the local water district before a bore is planned. Public records do not identify a provider tied to this place. Utilities reporting electric service in Guadalupe County include AEP Texas Central, City of New Braunfels, City of San Antonio, City of Seguin, Bluebonnet Electric Cooperative, Guadalupe Valley Electric Cooperative and Pedernales Electric Cooperative. We confirm the line owner for the address before planning an electric conduit bore.

Line ownerWhat it isSourceSize
AEP Texas Central, City of New Braunfels, City of San Antonio, City of Seguin, Bluebonnet Electric Cooperative, Guadalupe Valley Electric Cooperative and Pedernales Electric CooperativeElectric utilities reporting service in Guadalupe CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

We treat McQueeney’s 1991 median housing year in the American Community Survey 2019 to 2023 five year estimates as background, not a route condition. McQueeney’s housing age estimates are 13 percent before 1960, 54 percent from 1960 to 1999 and 33 percent in 2000 or later; we use them only as background. That mix can mean replacing older service near FM 725 as well as adding new connections. Before drilling near a marked line, we use hydrovac potholing to expose it; paint shows position, not depth.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

What is near McQueeney, including Seguin?

McQueeney is an unincorporated community in Guadalupe County, with 4.09 square miles of mapped land and an elevation of 544 feet. McQueeney’s ZIP codes are 78123, 78130 and 78155, useful for identifying the area when we discuss underground work. Seguin, the county seat and nearest larger city, is 4.8 miles east. Lake Dunlap is 4.9 miles northwest, and Marion is 6.0 miles west. The Yukon, Oklahoma main office is 469 road miles away, an 8.8 hour drive. That distance is part of planning a bore near FM 725 or the Guadalupe River.

Places near McQueeney

What boring work comes up on Terminal Loop Road in McQueeney?

  • Highway crossing: A bore beneath FM 725 can carry water, sewer or conduit under the pavement without cutting the roadway.
  • Street service: A new or replacement line along Terminal Loop Road can pass beneath a driveway while keeping the surface intact.
  • Rail crossing: A proposed route beneath the Union Pacific track needs the railroad’s agreement and its crossing conditions.
  • River crossing: A Guadalupe River bore needs a planned route below the channel and a jurisdiction check during planning.
  • Fiber route: A conduit bore beneath Short Cut Road can connect a service without trenching across the street.
  • Lake crossing: A line near Lake Mc Queeney can be planned as a bore to avoid cutting across the shore.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send to quote a McQueeney bore near Union Pacific?

For a crossing near Union Pacific track or FM 725, send the job location as an address or map pin, what will go in the ground, the pipe or conduit size and the footage. A sketch or plans help show the route, pits and nearby crossings. A Terminal Loop Road address also helps us place the work against the mapped streets.

Price starts with the 469 road miles from Yukon, then the ground and route. Lewisville clay can change reaming and fluid needs; a Union Pacific track crossing or Guadalupe River route adds crossing planning. Pipe size and length, marked utilities to expose, pavement, creek or drainage crossings, pits, excavator time and sand backfill also affect the work. High profile or emergency scheduling can change the scope.

Questions people ask about boring in McQueeney

Does Trinity take directional boring jobs in McQueeney and Guadalupe County?

Yes. We take work in McQueeney and across Texas, and the crews are ours or come from partner drilling contractors we have vetted. The required service setup does not depend on a local office. For a proposed crossing beneath FM 725 or a route near the Guadalupe River, Trinity stays your contact through the bore log.

What ground should I expect in McQueeney around Lewisville soil?

The USDA soil survey maps Lewisville soil across 28 percent of McQueeney. At about 40 inches, clay covers 31 percent of the mapped area and silty clay 29 percent. Those mapped textures can make cuttings sticky and cause clay to grip pipe, so the bore plan should account for fluid and staged reaming.

Will a bore in McQueeney hit rock in Lewisville soil?

Bedrock is not mapped in the top five feet across most of McQueeney, but it is mapped within 60 inches in 3 percent of the area. The geologic map includes Cenozoic Alluvium, undivided, and Late Cretaceous sedimentary material. A site specific bore still needs a plan for changing ground beneath a route such as FM 78.

Who approves a McQueeney bore under FM 725?

TxDOT reviews work in FM 725 right of way through the TxDOT San Antonio District. The utility owner files the application in TxDOT’s RULIS system, and we provide the bore plan and profile for its submission. The permit sets the route conditions and depth for the crossing.

What does a McQueeney bore under Union Pacific track require?

A crossing beneath the Union Pacific track needs an agreement from the railroad that owns it. The railroad sets crossing requirements such as casing, depth and flagging. With 2.97 track miles inside the mapped McQueeney boundary, the proposed bore route needs to be checked against the actual track location.

Can you bore a line beneath the Guadalupe River in McQueeney?

A bore can be planned beneath the Guadalupe River, which has 6.01 channel miles in McQueeney. The route needs to stay below the channel, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. Soil and access at the proposed banks also shape the bore plan.

How much 811 notice is needed for a McQueeney bore near Terminal Loop Road?

Texas811 needs a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. Paint near Terminal Loop Road gives a line’s position, not its depth. If marks wear off or move, request refreshed marks through Texas811 before work continues.

How far is McQueeney from the Yukon office, and does Seguin change the job?

The Yukon main office is 469 road miles from McQueeney, an 8.8 hour drive. Seguin is 4.8 miles east and is the county seat and nearest larger city, but it does not change the distance from Yukon. Mobilization, the route and ground near FM 725 all enter the job plan.

What affects the cost of a directional bore near FM 725 in McQueeney?

The route and scope determine the price, not one factor alone. The 469 road miles from Yukon affect mobilization; Lewisville clay can affect drilling time and fluid choices. Pipe size and length, utility exposures, pavement, Union Pacific or creek crossings, pits, excavator time, sand backfill and emergency work also matter.

Where the McQueeney facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in McQueeney

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in McQueeney, Texas

Type the address of your job in McQueeney. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for McQueeney

Same county: Cibolo · Schertz · New Braunfels · Redwood · Selma · New Berlin · Zuehl · Staples · Kingsbury. All counties: Texas county list.