trinityboringsolutions.com

Marion Texas Directional Boring: Branyon Clay, FM 78 and Union Pacific

Quick Answer: The City of Marion owns its water system, while several electric utilities report service in Guadalupe County, so we identify the line owner and expose marked lines before a bore near FM 78. Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), work in Marion, Texas, including routes that must pass beneath Union Pacific track. Marion is 475 road miles from our Yukon, Oklahoma main office, and that distance affects mobilization for work along Schulz Street. Branyon clay is mapped across much of Marion; sticky soil can grip the pipe, so we plan the reaming and pull carefully.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Marion bores at a glance

  • Incorporated city in Guadalupe County, Texas. Population 1,098 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 475 miles, about 8.9 hours of driving.
  • Ground: Branyon soil is mapped on 66 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: FM 78 and FM 465. State permit office: TxDOT San Antonio District.
  • Railroad track inside the boundary: Union Pacific, with 2 mapped street and rail crossings.
  • Named streams inside the boundary: Santa Clara Creek.
  • Public water: City of Marion, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring near Santa Clara Creek in Marion?

We take directional boring work in Marion, Guadalupe County, where the Census Bureau Vintage 2024 estimate puts the population at 1,098. Along San Antonio Street or near Santa Clara Creek, we install water, sewer, gas, electric conduit and fiber by bore when the route and plans call for it. The line owner and marked utilities need to be identified before the drill approaches the route.

Our main office is in Yukon, Oklahoma, and Marion work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business that started in 1965, with directional boring work dating to 1982. That experience covers small service lines and large casing, for a Schulz Street service or a planned crossing beneath Union Pacific track.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What is Branyon soil like to bore in Marion?

The USDA soil survey maps Branyon soil across 66 percent of Marion and Houston Black across 30 percent; Tinn accounts for the remaining 4 percent. Surface texture is clay throughout the mapped area, and clay is also mapped at about 40 inches below the surface. The survey reports an average clay content of 53 percent at that depth, so the ground is in the heavy clay range. We treat Marion’s mapped soil patterns as planning information, not test borings, when considering underground work. For a bore near FM 78, sticky cuttings and clay that grips the pipe call for controlled fluid and staged reaming.

USDA soil survey, inside the Marion city limitsWhat is mapped
Soil series mappedBranyon 66 percent, Houston Black 30 percent and Tinn 4 percent
Texture at the surfaceclay 100 percent
Texture about 40 inches downclay 100 percent
Engineering class about 40 inches downfat clay (CH) 100 percent
Average clay content about 40 inches down53 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils4 percent of the area
High corrosion risk for uncoated steel100 percent of the area

The map does not place bedrock in Marion’s top five feet, though that does not rule out deeper rock. Seasonal water tables are not mapped, while flood prone soils cover 4 percent of the area, so Santa Clara Creek still needs a crossing plan that stays below the channel. High steel corrosion risk is mapped across the area; the line owner should consider casing and tracer wire materials. The mapped units include Alluvium, undivided, of Cenozoic age, and Late Cretaceous sedimentary material. Those units point to variable ground, so field conditions still matter.

How do we drill Marion’s clay?

Branyon and Houston Black clay dominate Marion’s mapped ground. Near Center Street or FM 78, we control fluid, open the hole in stages and have the pipe ready before the final ream.

  1. Clay control: Branyon soil is mapped across much of Marion, so we use a thinner drilling fluid and polymer to limit sticky cuttings and pipe grip.
  2. Staged reaming: Near Schulz Street, we enlarge the hole in steps and coordinate the pull so clay does not sit open longer than needed.
  3. Utility exposure: At a route near the City of Marion water lines, we hydrovac pothole every marked utility before the drill gets close; paint does not show depth.
  4. Tracking: For a bore near FM 78, we follow the drill head from the surface and record depth and pitch as it advances.
Reel of 4 inch HDPE conduit on the exit side of a 385 foot directional bore under creeks and wetland in Guthrie, Oklahoma
A reel of 4 inch HDPE conduit on the exit side of a 385 foot bore under creeks and wetland in Guthrie, Oklahoma.

What does a bore have to cross in Marion near Union Pacific?

FM 78 and FM 465 are the state highways inside Marion, with 2.1 mapped roadway miles of FM 78 and 0.1 mile of FM 465. San Antonio Street, Schulz Street and Center Street are among the longer local routes. A bore under existing highway pavement avoids an open cut through the roadway; the alignment and required cover need to follow the applicable TxDOT permit. On rural highway crossings, the bore must extend beneath all travel lanes, so the crossing profile matters as much as the street address.

CrossingTypeMapped extentWho has a say
FM 78State highway2.1 roadway miles insideState highway office
FM 465State highway0.1 roadway miles insideState highway office
Union PacificRailroad1.18 track miles insideThe railroad
Santa Clara CreekStream0.02 channel miles insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 1.18 track miles inside Marion on its Glidden Subdivision, and public records map 2 street and rail crossings in the city. Amtrak also uses the track. Any rail crossing needs an agreement from Union Pacific that sets the crossing conditions. Santa Clara Creek has 0.02 channel miles inside the limits, with 1 mapped street crossing of a named stream. No lakes or ponds are mapped within one mile, but a creek route still needs careful depth planning.

Who has to sign off on Marion work in Guadalupe County?

FM 78 and FM 465 are state highways, so work in their right of way needs a TxDOT utility permit reviewed by the TxDOT San Antonio District. The utility owner, not our drilling crew, submits the application in TxDOT’s RULIS system; we prepare the bore plan and profile for that filing and work under the owner’s permit. A Union Pacific crossing needs an agreement with the railroad, which sets details such as casing, depth and flagging. For Santa Clara Creek, planning checks whether the crossing falls under U.S. Army Corps of Engineers jurisdiction. Because Marion is incorporated, we treat its city streets as belonging to the city when planning boring work.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the lines near Marion’s City of Marion water system, and how should we account for that before boring?

The City of Marion owns the public water system, which uses purchased surface water and has 657 service connections serving 1,971 people. For electric service, county records list AEP Texas Central, City of New Braunfels, City of San Antonio, City of Seguin, Bluebonnet Electric Cooperative, Guadalupe Valley Electric Cooperative and Pedernales Electric Cooperative. Those county listings do not identify the provider at every address. Before a conduit bore near San Antonio Street, we confirm the electric line owner and expose marked utilities.

Line ownerWhat it isSourceSize
City of MarionPublic water systemSurface water bought from another system657 connections, 1,971 people served
AEP Texas Central, City of New Braunfels, City of San Antonio, City of Seguin, Bluebonnet Electric Cooperative, Guadalupe Valley Electric Cooperative and Pedernales Electric CooperativeElectric utilities reporting service in Guadalupe CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

American Community Survey 2019 to 2023 five year estimates put Marion’s median housing year at 1990. The estimates show 15 percent of homes built before 1960, 52 percent from 1960 to 1999 and 33 percent in 2000 or later. A replacement bore along Schulz Street may pass older buried lines, while newer services can bring a different route or connection point. We use hydrovac potholing to expose each marked utility on the bore path before drilling near it; paint shows position, not depth.

Hydrovac truck and boring equipment staged beside an airport taxiway for utility daylighting in Oklahoma City
Our hydrovac truck and boring equipment beside an airport taxiway in Oklahoma City, set up to expose a utility crossing.

How far is Marion from Santa Clara and our Yukon office?

Marion is in Guadalupe County, at an elevation of 648 feet, and covers 0.78 square miles. Its ZIP code is 78124. Santa Clara is 1.8 miles northwest, Cibolo is 4.5 miles west, Zuehl is 4.7 miles south, McQueeney is 6.0 miles east and New Berlin is 6.1 miles south. Cibolo is the nearest larger city, while Seguin, the county seat, is 10.5 miles east. Our Yukon yard is 475 road miles away, an 8.9 hour drive, which affects mobilization for a bore in Marion.

Places near Marion

What would we bore near Schulz Street in Marion?

  • Water service: A connection near the City of Marion water system can be routed beneath a driveway along San Antonio Street instead of cutting its surface.
  • Highway crossing: A utility route beneath FM 78 needs a bore profile that accounts for the TxDOT right of way and required cover.
  • Rail crossing: A line beneath Union Pacific track needs an agreement with the railroad and a route planned around its crossing conditions.
  • Creek crossing: A bore near Santa Clara Creek needs depth planning below the channel and a check for federal jurisdiction.
  • Fiber drop: A conduit route along Schulz Street can pass beneath pavement and driveways while keeping the surface uncut.
  • Street service: A replacement line near Center Street can use a bore route that avoids open cutting the roadway.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for work near Center Street in Marion?

For a Center Street request, start with the address or a map pin so we can place the route. Tell us what will go underground, such as water or fiber, and the pipe or conduit size. Give us the footage, too. A sketch or plans showing a crossing of FM 78 or Union Pacific track help us understand the alignment.

We base the price for boring work in Marion on the job scope. Branyon clay affects drilling and reaming; crossings of FM 78 or Union Pacific track add planning and permit needs. We also account for pipe or conduit size, footage, marked utilities to expose, pavement or concrete, creek or drainage crossings, pits, excavator time and sand backfill. Marion is 475 road miles from Yukon, so mobilization is part of the estimate. High profile or emergency work can require a different plan.

Questions people ask about boring in Marion

Does Trinity Boring Solutions take directional boring jobs in Guadalupe County near Marion, and who staffs them?

Yes. We take directional boring work in Marion, and crews are assigned through our own team and vetted drilling contractor partners. The customer works with Trinity from the first call through the bore log, regardless of which crew is on site. For a route near FM 78, the planned path and marked utilities guide the work.

Who runs Marion’s public water system, and where does its water come from for underground work planning?

The City of Marion owns the public water system, and its source is purchased surface water. The system has 657 service connections serving 1,971 people. For a bore near San Antonio Street, we still need the specific line locations exposed before drilling close to water infrastructure.

Which electric company serves my Marion address in Guadalupe County, and who confirms conduit specs?

The electric line owner depends on the address. County reports list AEP Texas Central, City of New Braunfels, City of San Antonio, City of Seguin, Bluebonnet Electric Cooperative, Guadalupe Valley Electric Cooperative and Pedernales Electric Cooperative. The owner of the line near Schulz Street should confirm conduit specifications before that route is designed.

Who controls Schulz Street in Marion, and does a bore mean the street must be cut?

Schulz Street is a city street because Marion is incorporated. A directional bore can pass beneath the roadway without an open cut, depending on the route and site conditions. If the work instead involves FM 78 right of way, the utility owner needs the applicable TxDOT permit.

How do Marion’s older homes near San Antonio Street affect replacement bores?

The American Community Survey 2019 to 2023 five year estimates put Marion’s median housing year at 1990, with 15 percent of homes built before 1960. Older services may need replacement, while later construction may have different connection layouts. Near San Antonio Street, we expose marked lines before drilling close to them.

Does Branyon soil in Marion corrode steel, and what pipe should I use?

The USDA soil survey maps high steel corrosion risk across Marion, including areas mapped as Branyon clay. The line owner should decide on coatings or materials for steel casing and tracer wire. HDPE is not subject to that soil corrosion concern, but the right pipe depends on the line design and owner’s specifications.

How much notice does Texas811 need for a Marion bore near FM 78, and what if marks change?

Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. For boring schedules in Marion, we follow Texas811’s description of at least two working days. If the start slips more than 14 days past the original notice, make a new request; refresh worn or moved marks through Texas811 before work continues.

How far is Marion from Cibolo and Trinity’s Yukon, Oklahoma main office, and does distance affect the job?

Cibolo is 4.5 miles west of Marion, while our Yukon main office is 475 road miles away, an 8.9 hour drive. The distance can affect mobilization for a bore near FM 465. We coordinate through Trinity from the first call to the bore log, even when a vetted partner contractor crew is on site.

What affects the price of directional boring in Marion near FM 78?

The job details drive the price, not a single rate. Branyon clay, bore length and pipe size affect the drilling plan; FM 78 or Union Pacific crossings can add permit and coordination work. We also consider utilities to expose, pavement, creek crossings, pits, excavator time, backfill, emergency timing and mobilization from Yukon.

Where the Marion facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Marion

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Marion, Texas

Type the address of your job in Marion. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Marion

Same county: Seguin · Schertz · New Braunfels · Redwood · Selma · Lake Dunlap · Geronimo · Staples · Kingsbury. All counties: Texas county list.