trinityboringsolutions.com

Granbury Texas Directional Boring: Bastrop Soil, US 377, Lambert Branch

Quick Answer: Fine sandy loam is Granbury’s most common mapped surface texture, but clay loam also covers part of the city. We take directional boring, also called horizontal directional drilling (HDD), for crossings of US 377 and its connected utility routes. The Yukon, Oklahoma main office is 250 road miles away, with Granbury’s Fort Worth and Western Railroad routes also shaping mobilization and planning. Bastrop soil and Granbury soil each cover 15 percent of mapped land; clay can stick to a reamer, so we control fluid and ream in stages.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Granbury bores at a glance

  • County seat of Hood County, Texas. Population 12,934 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 250 miles, about 5 hours of driving.
  • Ground: Bastrop soil is mapped on 15 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 34 percent of the area.
  • Highways inside the boundary: US 377, US 377 Business, FM 51, FM 4 and Texas State Highway 144. State permit office: TxDOT Fort Worth District.
  • Railroad track inside the boundary: Fort Worth and Western Railroad, with 10 mapped street and rail crossings.
  • Named streams inside the boundary: Lambert Branch, Rucker Creek, Lick Branch and Walnut Creek.
  • Public water: City of Granbury, surface water.
  • Electric: City of Granbury municipal electric system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring in Granbury and Hood County?

Granbury is the Hood County seat, and the Census Bureau Vintage 2024 estimate puts its population at 12,934. We install water, sewer, gas, electric conduit and fiber lines, including routes beneath Pearl Street or toward utilities serving properties along US 377. Directional boring lets a line pass below those paved routes without opening a trench through the surface.

Our main office is in Yukon, Oklahoma, and Granbury work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business started in 1965, with directional boring part of our work since 1982. Granbury routes such as US 377 and Lambert Branch may call for anything from 3/4 inch service lines to 48 inch casing, with bore lengths from 10 feet to 5,000 feet.

Directional drill rig and crew working on a street beside a brick commercial building
Our drill and crew set up on a street beside a brick commercial building. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Granbury’s Bastrop soil survey show?

The USDA soil survey maps Bastrop and Granbury soil series across 15 percent of Granbury each. Fine sandy loam is the most common mapped surface texture at 20 percent, followed by very fine sandy loam at 18 percent and clay loam at 17 percent. About 40 inches down, bedrock is mapped under 30 percent of the area, sandy clay loam under 23 percent, and clay under 12 percent. The mapped clay content averages 30 percent at that depth. These are mapped patterns, not test borings, so the route still needs field checks.

USDA soil survey, inside the Granbury city limitsWhat is mapped
Soil series mappedBastrop 15 percent, Granbury 15 percent, Aledo 9 percent, Thurber 6 percent and Eckrant 5 percent
Texture at the surfacefine sandy loam 20 percent, very fine sandy loam 18 percent and clay loam 17 percent
Texture about 40 inches downbedrock 30 percent, sandy clay loam 23 percent and clay 12 percent
Engineering class about 40 inches downlean clay (CL) 36 percent, fat clay (CH) 18 percent and silty sand (SM) 7 percent
Average clay content about 40 inches down30 percent
Bedrock mapped within 60 inches34 percent of the area (30 percent hard rock, 3 percent weathered rock)
Seasonal water table within 60 inches11 percent of the area
Flood prone soils5 percent of the area
High corrosion risk for uncoated steel28 percent of the area

The USDA soil survey maps bedrock within 60 inches across 34 percent of Granbury and hard bedrock within that depth across 30 percent; typical bedrock depth is 22 inches. Clay rich sections can cling to a reamer, while harder material can slow the cut and make steering more demanding at a soil to rock change. Seasonal water tables are mapped within 60 inches across 11 percent, and flood prone soils cover 5 percent, so pits near Lambert Branch need attention to water and channel depth. High steel corrosion risk is mapped across 28 percent, a concern for uncoated steel casing or tracer wire. The mapped Pleistocene alluvium and Early Cretaceous sedimentary unit point to changing material along a route.

How do crews bore Granbury ground with shallow bedrock?

For a Granbury route, the soil survey is a starting point, not a pit log. Bastrop and Granbury soils can vary along the bore, so we watch returns and steering as the drill advances.

  1. In Bastrop and Granbury soil, we use a controlled drilling fluid mix and staged reaming to limit sticky clay buildup on the reamer.
  2. Where Granbury’s mapped bedrock lies shallow, we track depth and pitch closely as the bit meets harder material and adjust the drilling pace.
  3. Near Lambert Branch, we plan pit placement and bore depth with mapped flood prone soils and possible water in the excavation in mind.
  4. Along Morgan Street, we expose each marked utility with hydrovac before the drill approaches; a walkover locator tracks the head and records depth and pitch.
Rock bit on the drill rod at the front of a Vermeer D24x40 S3 with broken sandstone at the entry of a rock bore in Guthrie, OK
Rock bit on the drill rod with broken sandstone at the entry of a rock bore in Guthrie, Oklahoma.

Where might a Granbury line pass under US 377?

US 377, US 377 Business, FM 51, FM 4, Texas State Highway 144 and FM 167 run within Granbury. A utility route beneath US 377 or FM 51 has to be planned around the highway pavement and its right of way. Pearl Street is the longest named street at 3.48 miles in the city, followed by Morgan Street at 3.34 miles and Avery Road at 2.12 miles. Loop 567 covers 3.82 miles. Those paved corridors make a bore useful where an open trench would disrupt the road surface.

CrossingTypeMapped extentWho has a say
US 377US highway18.1 roadway miles insideState highway office
US 377 BusinessUS highway4.4 roadway miles insideState highway office
FM 51State highway7.2 roadway miles insideState highway office
FM 4State highway5.2 roadway miles insideState highway office
Texas State Highway 144State highway4.6 roadway miles insideState highway office
FM 167State highway2.3 roadway miles insideState highway office
Fort Worth and Western RailroadRailroad6.24 track miles insideThe railroad
Lambert BranchStream3.63 channel miles insideChecked for Corps of Engineers jurisdiction
Rucker CreekStream1.84 channel miles insideChecked for Corps of Engineers jurisdiction
Lick BranchStream1.16 channel miles insideChecked for Corps of Engineers jurisdiction
Walnut CreekStream0.65 channel miles insideChecked for Corps of Engineers jurisdiction
Fall BranchStream0.63 channel miles insideChecked for Corps of Engineers jurisdiction
Mc Carty BranchStream0.43 channel miles insideChecked for Corps of Engineers jurisdiction
Strouds CreekStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

The Fort Worth and Western Railroad has 6.24 track miles within Granbury, and public mapping shows 10 street and rail crossings in the city. A crossing of its track needs the railroad owner’s agreement. Lambert Branch runs 3.63 channel miles, while Rucker Creek runs 1.84; public mapping shows 18 street crossings of named streams. Lake Arthur and Lake Granbury are also within the city limits. For a stream or lake route, planning checks whether the U.S. Army Corps of Engineers has jurisdiction.

Who approves a Granbury bore under US 377 or Fort Worth and Western Railroad?

For electric or communication lines crossing US 377, the TxDOT Utility Accommodation Rules call for at least 60 inches of cover below the lowest crossed grade; along the right of way, the stated minimum is 48 inches. Water lines need 60 inches at crossings and 36 inches along the right of way, while pressurized sewer crossings need 60 inches. The TxDOT Fort Worth District reviews the utility owner’s application in RULIS. The utility owner files it, and we prepare the bore plan and profile for that filing. Work beneath existing highway pavement uses boring or tunneling. A route crossing the Fort Worth and Western Railroad also needs an agreement with the railroad owner, and Lambert Branch planning checks for federal waterway jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines may be near Granbury’s City of Granbury water system?

The City of Granbury public water system uses surface water and reports 8,329 service connections serving 11,468 people. Granbury also owns its municipal electric system, which reports 3,571 customers. Before a conduit bore near the water system or city electric lines, we use Texas811 marks and hydrovac potholing to expose marked utilities along the planned path. Paint shows a line’s position, not its depth, so the exposure helps keep the drill path clear.

Line ownerWhat it isSourceSize
City of GranburyPublic water systemSurface water8,329 connections, 11,468 people served
City of Granbury municipal electric systemCity owned electric systemReports to the U.S. Energy Information Administration3,571 customers reported
Oncor Electric Delivery Company, Texas-New Mexico Power, Tri-County Electric Cooperative and United Electric Cooperative ServiceElectric utilities reporting service in Hood CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Granbury’s median housing year at 2003; 9 percent of housing units were built before 1960, 34 percent from 1960 to 1999, and 57 percent in 2000 or later. A bore near Pearl Street may serve a replacement route for older infrastructure or a newer service connection. The building era alone does not identify buried lines, so we pothole marked utilities before drilling near them.

Hydrovac truck and boring equipment staged beside an airport taxiway for utility daylighting in Oklahoma City
Our hydrovac truck and boring equipment beside an airport taxiway in Oklahoma City, set up to expose a utility crossing.

What is near Granbury and Canyon Creek?

Granbury is an incorporated city in Hood County, with an elevation of 710 feet and 17.23 square miles of land. The city’s ZIP codes are 76048 and 76049. Stockton Bend is 3.3 miles north, Canyon Creek is 3.6 miles southeast, DeCordova is 4.8 miles east, and Oak Trail Shores is 5.2 miles northwest. Granbury is the county seat; Cleburne, the nearest larger city listed, is 21.9 miles east. The Yukon, Oklahoma yard is 250 road miles away, a 5.0 hour drive, which affects mobilization for a bore near Loop 567 or Lambert Branch.

Places near Granbury

What would we bore near Granbury’s Lambert Branch?

  • Highway crossing: A bore below US 377 can carry a water or sewer line beneath pavement rather than opening a trench across the road.
  • Water service: A service route near the City of Granbury system can connect a property while avoiding a cut across Pearl Street.
  • Fiber conduit: A conduit bore along Morgan Street can link a route beneath the paved corridor without cutting the street surface.
  • Creek crossing: A line below Lambert Branch needs a planned path that stays under the channel and accounts for pit access.
  • Rail crossing: A bore beneath the Fort Worth and Western Railroad needs the track owner’s agreement and crossing conditions.
  • Electric conduit: A route near the city owned Granbury electric system starts with locating and exposing marked lines along the proposed bore path.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore on Granbury’s Avery Road?

For an Avery Road quote, send the address or map pin, what will go underground, the pipe or conduit size and the footage; a sketch or plans help. The route matters in Granbury: note any pavement, nearby Lambert Branch drainage, or crossings of the Fort Worth and Western Railroad so we can shape the bore plan around the actual site.

Mobilization starts with the 250 road miles from Yukon, then the Granbury ground comes into focus: clay, shallow bedrock or water near Lambert Branch can change drilling time and pit work. We also account for bore length and line size, how many marked utilities need exposure, pavement along US 377, and any railroad or creek crossing. Access for pits, excavator time and sand backfill matter too, as do high profile or emergency schedules.

Questions people ask about boring in Granbury

Does Trinity take directional boring work in Granbury and Hood County, and who staffs it?

Yes. We take directional boring work in Granbury, with crews from our own team and vetted partner drilling contractors working from satellite yards. Our Yukon, Oklahoma main office coordinates the job, whether the route crosses US 377 or follows a service path near Lambert Branch.

Who controls Morgan Street in Granbury, and can a bore avoid cutting it?

Morgan Street is a city street because Granbury is incorporated. A directional bore can pass beneath the paved surface, with pits placed in dirt on either side where the site allows. We locate and expose marked utilities along the Morgan Street bore path before drilling near them.

Do Pearl Street homes in Granbury have old lines that need replacement bores?

Some housing is older, but the American Community Survey 2019 to 2023 estimates put Granbury’s median housing year at 2003. A bore near Pearl Street may replace an older line or serve newer construction. We check marked utilities on the actual route rather than assume a line’s age from nearby homes.

Can groundwater or flooding affect Granbury bore pits near Lambert Branch?

It can affect planning. The USDA soil survey maps seasonal water tables within 60 inches across 11 percent of Granbury and flood prone soils across 5 percent. Near Lambert Branch, we plan pits and bore depth with water and channel conditions in mind; actual conditions need to be checked at the site.

Does Bastrop soil in Granbury corrode steel, and what pipe should a bore use?

The survey maps high steel corrosion risk across 28 percent of Granbury, but that area figure does not identify conditions at a particular Bastrop soil route. The line owner selects coatings for steel casing or tracer wire. HDPE avoids the steel corrosion concern; the pipe choice depends on the line design.

What ground does a Granbury bore cross in Bastrop soil?

The USDA soil survey maps Bastrop soil across 15 percent of Granbury. About 40 inches down, sandy clay loam is mapped under 23 percent of the area, clay under 12 percent, and bedrock under 30 percent. Those are soil survey patterns, not test borings, so we check the route as work is planned.

Can I reach Trinity after hours about an urgent bore on Granbury’s Morgan Street?

Yes. Call (405) 409-7423; a person answers the phone 24 hours a day. For an urgent Morgan Street bore, share the location, line type and any known utility or pavement constraints so we can understand the immediate scope.

How early should I request a Granbury bore locate near Loop 567?

For a Loop 567 bore, submit the Texas811 locate request at least two working days before excavation, excluding Saturdays, Sundays and legal holidays. Request it no earlier than 14 days before the start. If work slips more than 14 days past the original notice, submit a new request; have worn or moved marks refreshed through Texas811 before continuing.

What affects the price of directional boring in Granbury beneath US 377?

The route and scope set the price. A bore beneath US 377 may involve pavement and a TxDOT permit, while Granbury’s clay or shallow bedrock can affect drilling time. Length, pipe size, utility exposures, creek or railroad crossings, pit work, backfill and mobilization from Yukon also shape the job.

Where the Granbury facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Granbury

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Granbury, Texas

Type the address of your job in Granbury. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Granbury

Same county: Tolar · Cresson · Lipan. All counties: Texas county list.