Las Lomas Texas Directional Boring: Jimenez Soil, US 83 And Los Olmos Creek
Quick Answer: Las Lomas is an unincorporated community in Starr County, so its streets and permits fall to the county or state, not a city government. We take directional boring, also called horizontal directional drilling (HDD), work in Texas for routes near US 83, which lies 0.1 miles from the mapped boundary. Our Yukon office is 741 road miles away, and a Garza Road route affects mobilization planning. The USDA survey maps Jimenez soil across 57 percent of the area, with gravelly loam that can make the hole grab the reamer.
Las Lomas bores at a glance
- Unincorporated community in Starr County, Texas. Population 3,054 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 741 miles, about 14.4 hours of driving.
- Ground: Jimenez soil is mapped on 57 percent of the area, with variable about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 5 percent of the area.
- No state or US highway is mapped inside the boundary. Closest: US 83.
- Railroad track inside the boundary: none mapped.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who handles directional boring near Garza Road in Las Lomas?
Las Lomas is an unincorporated community, so its streets are not run by a city government; county or state control depends on the road. The 2020 Census counted 3,054 residents. We install water, sewer, gas, electric conduit and fiber along routes such as Garza Road or Doria Street, with the alignment set by the address and existing lines.
Our main office is in Yukon, Oklahoma, and Las Lomas work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and we have done directional boring since 1982. The 3/4 inch service line to 48 inch casing range and 10 feet to 5,000 feet bore range can cover a service connection off Guerra Street or a longer crossing near US 83.

What does the USDA survey show about Jimenez soil in Las Lomas?
The USDA soil survey maps Jimenez soil across 57 percent of Las Lomas, mainly as the Jimenez-Quemado association, with very gravelly loam at the surface. Fine sandy loam covers 30 percent and silty clay 9 percent. At about 40 inches below the surface, texture is mapped as variable in 61 percent of the area and sandy clay loam in 25 percent; stratified fine sandy loam to clay accounts for 9 percent. Average clay content at that depth is 27 percent. These are mapped patterns, not test borings, so the route still needs site checks.
| USDA soil survey, inside the Las Lomas mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Jimenez 57 percent, McAllen 25 percent, Matamoros 9 percent, Copita 5 percent and Pits (miscellaneous area) 3 percent |
| Texture at the surface | very gravelly loam 57 percent, fine sandy loam 30 percent and silty clay 9 percent |
| Texture about 40 inches down | variable 61 percent, sandy clay loam 25 percent and stratified very fine sandy loam to silty clay to clay 9 percent |
| Engineering class about 40 inches down | lean clay (CL) 26 percent and fat clay (CH) 9 percent |
| Average clay content about 40 inches down | 27 percent |
| Bedrock mapped within 60 inches | 5 percent of the area (0 percent hard rock, 5 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 9 percent of the area |
| High corrosion risk for uncoated steel | 14 percent of the area |
The USDA soil survey maps bedrock within 60 inches in 5 percent of Las Lomas, and weathered bedrock in 5 percent; hard bedrock is not mapped within that depth. Typical bedrock depth is 37 inches. No seasonal water table is mapped within 60 inches, while flood prone soils cover 9 percent. High steel corrosion risk is mapped in 14 percent, so the line owner should consider casing and tracer wire materials there. The Goliad Formation, Miocene, is mapped with clay, sandstone, marl, caliche, limestone and conglomerate. Those changes can call for different tooling and bore planning along a Garza Road route.
How do crews work with variable soil in Las Lomas?
We plan each Las Lomas bore around its mapped variable texture and the specific route, since the USDA survey shows changing material at about 40 inches below the surface.
- Variable profile: With texture mapped as variable under 61 percent of Las Lomas, we check the route and adjust the drilling plan as soil changes around a Garza Road bore.
- Clay sections: Where the survey maps clay rich material at 40 inches, thinner drilling fluid and staged reaming help limit sticky buildup before pipe is pulled through.
- Gravelly surface: Very gravelly loam covers 57 percent of the mapped area, so we keep the pipe ready and ream in stages where loose material could fall back into the hole.
- Marked lines: At a planned crossing along Doria Street, we hydrovac pothole each marked utility before drilling near it, then track the head and record depth and pitch.

Which roads, tracks or creeks could a bore meet in Las Lomas near US 83?
US 83 lies 0.1 miles outside the mapped Las Lomas boundary, and no highway is mapped inside it. For work beneath existing US 83 pavement, TxDOT requires boring or tunneling, with the bore extending beneath all travel lanes on rural highways. Inside the community, Garza Road is the longest named street at 1.28 miles, followed by J M Martinez Street at 0.9 miles and Doria Street at 0.88 miles. Those street lengths help identify a route, but a site plan must show the actual crossing points.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 83 | Highway nearby | 0.1 miles outside | State highway office |
| Border Pacific Railroad | Railroad nearby | 0 miles outside | The railroad |
| Los Olmos Creek | Stream nearby | 0.2 miles outside | Checked for Corps of Engineers jurisdiction |
| Olmitos Creek | Stream nearby | 0.8 miles outside | Checked for Corps of Engineers jurisdiction |
The Border Pacific Railroad runs along or touches the Las Lomas boundary, but no street and rail crossing is mapped inside the community. A route under that track needs an agreement from the railroad that owns it. Los Olmos Creek is 0.2 miles outside the boundary, and Olmitos Creek is 0.8 miles away; no named stream crossing is mapped inside. A creek crossing near Las Lomas is planned for channel depth and checked for possible federal jurisdiction.
Who approves bore work in Las Lomas in Starr County?
Las Lomas has no city government, so county or state agencies handle street and permit authority according to the road involved. For US 83, electric and communication lines need at least 60 inches of cover below the lowest crossed grade; water needs 60 inches, and pressurized sewer needs 60 inches. The line owner, not the drilling contractor, applies through TxDOT’s RULIS system, reviewed by the TxDOT Pharr District. We prepare the bore plan and profile for the utility owner’s application and work under its permit. A crossing of the Border Pacific Railroad also needs an agreement with that railroad. A Los Olmos Creek crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose buried lines should crews verify in Las Lomas, Starr County?
For an address near Garza Road, the water provider must be confirmed with the county, city or local water district before a bore is planned. EPA drinking water records do not identify which system serves a specific Las Lomas address. AEP Texas Central, Magic Valley Electric Cooperative and Medina Electric Cooperative report electric service in Starr County, but the line owner for the specific address must be confirmed before planning an electric conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| AEP Texas Central, Magic Valley Electric Cooperative and Medina Electric Cooperative | Electric utilities reporting service in Starr County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates give Las Lomas a median housing year of 1995: 5 percent of units were built before 1960, 67 percent from 1960 to 1999 and 28 percent in 2000 or later. A planned replacement along Guerra Street may meet older services, while newer construction can call for service extensions. Before drilling near marked lines, we hydrovac pothole each one on the route; paint shows position, not depth.

What places are near Las Lomas and Santa Cruz?
Las Lomas is in Starr County, at an elevation of 173 feet, and covers 0.39 square miles. Its ZIP code is 78582. Santa Cruz is 0.8 miles southeast, while Santa Rosa is 1.1 miles south and El Chaparral is 1.1 miles southeast. Rio Grande City, the county seat and nearest larger city, is 3.1 miles west. The Yukon yard is 741 road miles away, a 14.4 hour drive, so that distance is part of planning a job near Garza Road.
Places near Las Lomas
- Santa Cruz: 0.8 miles southeast
- Santa Rosa: 1.1 miles south
- Directional boring in El Chaparral: 1.1 miles southeast
- Directional boring in Garza-Salinas II: 1.3 miles southeast
- Directional boring in B and E: 1.4 miles east
- Directional boring in Rio Grande City: 3.1 miles west
Which bore projects fit streets such as Doria Street in Las Lomas?
- US highway crossing: A route under US 83 needs a bore plan for the highway pavement and the required cover, with the crossing extending beneath all travel lanes on rural highways.
- Street utility bore: A water or sewer route along Garza Road can use entry and exit pits in the dirt instead of cutting the paved street.
- Fiber conduit: A conduit route near Doria Street needs its alignment checked against marked utilities and exposed lines before drilling near them.
- Rail crossing: If a proposed route reaches the Border Pacific Railroad at the Las Lomas boundary, the railroad agreement sets the crossing conditions.
- Creek crossing: A proposed bore near Los Olmos Creek needs channel depth planning and a check for U.S. Army Corps of Engineers jurisdiction.
- Service replacement: A water or sewer service along Guerra Street can be bored between pits, with the route checked for existing utilities first.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What affects a directional boring quote near Guerra Street in Las Lomas?
Start with a map pin or address, because a point on Guerra Street differs from a route near Los Olmos Creek or US 83. Include what will go in the ground, the pipe or conduit size and footage. A sketch or plans help us see the route, access, pits and the crossings that need to be exposed before work begins.
The Yukon office is 741 road miles from Las Lomas, so mobilization is part of the job scope. Length, pipe or conduit size, soil and rock all matter; the survey’s variable texture at 40 inches can change the drilling plan. The number of utilities to expose, pavement near US 83, a creek crossing, pits, excavator time and sand backfill also affect the work. High profile or emergency timing can add requirements. We review the full route, including any Border Pacific Railroad crossing, rather than price from footage alone.
Questions people ask about boring in Las Lomas
Does Trinity Boring Solutions take directional boring work in Las Lomas and Starr County?
Yes. We take directional boring work in Las Lomas, with our own crews and partner drilling contractors Trinity has vetted available for staffing. Customers deal with Trinity from the first call through the bore log, whichever crew is on site. A route on Garza Road still needs its address and existing utility marks checked before drilling.
What ground does a bore pass through in Las Lomas near Jimenez soil?
The USDA soil survey maps Jimenez soil across 57 percent of Las Lomas, with very gravelly loam at the surface. At about 40 inches down, texture is variable in 61 percent of the area and sandy clay loam in 25 percent. The mapped pattern is not a test boring, so a route near Doria Street needs its own site review.
Is there rock near the surface in Las Lomas?
The USDA soil survey maps bedrock within five feet in 5 percent of Las Lomas, and weathered bedrock within that depth in 5 percent. Hard bedrock is not mapped within 60 inches. A bore near Garza Road still needs to account for local variation, since the mapped depth does not establish conditions at every address.
Who approves a bore under US 83 near Las Lomas?
TxDOT reviews a utility owner’s permit application for US 83 through the TxDOT Pharr District. The utility owner submits the application in RULIS, and we prepare the bore plan and profile for it. Required cover depends on the line type, with 60 inches at highway crossings for electric, communication, water and pressurized sewer lines.
What is needed to bore under the Border Pacific Railroad near Las Lomas?
A crossing beneath the Border Pacific Railroad needs an agreement from the railroad that owns the track. That agreement sets crossing conditions such as casing, depth and flagging. The track runs along or touches the Las Lomas boundary, so a route near Guerra Street would first need to establish whether it reaches the railroad.
Can a line be bored under Los Olmos Creek near Las Lomas?
A line can be planned beneath Los Olmos Creek, but the crossing needs route specific depth planning and a check for U.S. Army Corps of Engineers jurisdiction. The creek is 0.2 miles outside the mapped Las Lomas boundary. The survey does not map a named stream crossing inside the community.
How far is Las Lomas from Trinity’s Yukon office, and does Rio Grande City affect a job?
Las Lomas is 741 road miles and a 14.4 hour drive from the Yukon yard. Rio Grande City is 3.1 miles west, but the drive distance from Yukon still affects mobilization for work on streets such as Garza Road. The route, equipment and crew plan determine how that travel fits the job.
How early should I call Texas811 for a bore along Garza Road in Las Lomas?
For a planned bore along Garza Road, make the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If the start slips more than 14 days past the original notice, make a new request. Have worn or moved marks refreshed through Texas811 before work continues.
What affects the cost of a directional bore near US 83 in Las Lomas?
The route and scope determine the price, including length, pipe or conduit size, soil and rock, and utilities that must be exposed. A US 83 crossing can add pavement and permit planning, while the 741 road miles from Yukon affect mobilization. Creek crossings, pits, excavator time, backfill and emergency timing can also change the work required.
Where the Las Lomas facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Las Lomas
- U.S. Census Bureau, TIGER/Line 2024: Las Lomas boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Las Lomas population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Las Lomas housing units and year built
- Macrostrat geologic map compilation: map units under Las Lomas
- U.S. Department of Transportation, North American Rail Network: track owners in Starr County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Starr County
- U.S. Geological Survey, Elevation Point Query Service: Las Lomas elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Las Lomas
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Las Lomas
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Las Lomas, Texas
Type the address of your job in Las Lomas. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Las Lomas
Same county: Roma · Escobares · La Grulla · Mikes · East Alto Bonito · West Alto Bonito · La Puerta · Mesquite · Valle Vista · Garceno · Camargito · Alto Bonito Heights. All counties: Texas county list.
