trinityboringsolutions.com

Granger Texas Directional Boring: Branyon Clay, FM 971 and Union Pacific

Quick Answer: Can a line pass beneath FM 971 or Union Pacific track without opening the surface? Yes, Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), in Granger, including crossings at FM 971. Granger is 362 road miles from our Yukon, Oklahoma main office, and the Union Pacific Waco Subdivision puts track crossings in the project picture. Branyon clay covers 85 percent of mapped soil series and can cling to the reamer, so staged reaming and a same day pull can matter.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Granger bores at a glance

  • Incorporated city in Williamson County, Texas. Population 1,209 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 362 miles, about 7.1 hours of driving.
  • Ground: Branyon soil is mapped on 85 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 1 percent of the area.
  • Highways inside the boundary: FM 971 and Texas State Highway 95. State permit office: TxDOT Austin District.
  • Railroad track inside the boundary: Union Pacific and Georgetown Railroad, with 3 mapped street and rail crossings.
  • Public water: City of Granger, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring in Granger, Williamson County?

Trinity Boring Solutions takes directional boring work in Granger, Williamson County, including routes along FM 971 and Texas State Highway 95. Can you get a line beneath one of those roads without cutting it? Yes, we can plan a bore beneath the road instead of opening its surface. The Census Bureau Vintage 2024 estimate puts Granger at 1,209 people; our crews install water, sewer, gas, electric conduit and fiber for routes beneath Commerce Street or Guadalupe Street.

Our main office is in Yukon, Oklahoma, and Granger work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore is roughly 4,100 feet of 48 inch pipe under the Arkansas River in Tulsa, Oklahoma. Trinity is a family business started in 1965, with directional boring work dating to 1982; a Granger service route beneath Willis Street is a more typical scale of work.

Trinity Boring Solutions directional boring crew, drill rig and hydrovac trailer staged along an airport service road at Will Rogers World Airport in Oklahoma City
Our boring crew, drill and hydrovac trailer staged along a service road at Will Rogers World Airport in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What does Branyon soil mean for a directional bore in Granger?

The USDA soil survey maps Branyon soil across 85 percent of Granger’s mapped soil series, with Heiden at 8 percent and Tinn at 6 percent. Branyon clay, 0 to 1 percent slopes, covers 65 percent of mapped area, and Branyon clay, 1 to 3 percent slopes, covers 20 percent. The survey maps clay across the surface and at about 40 inches below it, with average clay content there of 53 percent. We treat Granger’s mapped patterns as planning information, not test borings, so field conditions still need confirmation before underground work. For a bore beneath FM 971, sticky clay can build on the reamer and grip the pipe.

USDA soil survey, inside the Granger city limitsWhat is mapped
Soil series mappedBranyon 85 percent, Heiden 8 percent and Tinn 6 percent
Texture at the surfaceclay 100 percent
Texture about 40 inches downclay 100 percent
Engineering class about 40 inches downfat clay (CH) 100 percent
Average clay content about 40 inches down53 percent
Bedrock mapped within 60 inches1 percent of the area (0 percent hard rock, 1 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils6 percent of the area
High corrosion risk for uncoated steel100 percent of the area

The USDA soil survey maps weathered bedrock within 60 inches in 1 percent of Granger, but hard bedrock is not mapped at that depth; that does not rule out deeper rock along a route near Texas State Highway 95. Seasonal water table is not mapped within 60 inches, while flood prone soils cover 6 percent of the mapped area. High steel corrosion risk is mapped throughout the area, so the line owner should consider casing and tracer wire materials; HDPE is not affected by soil corrosion. The geologic map unit is Navarro and Taylor Groups, undivided, of Late Cretaceous age.

What does it take to bore Granger’s clay ground?

In Granger, we match the bore plan to Branyon clay: control fluid returns, open the hole in stages and have the line ready to pull before the final ream beneath FM 971.

  1. Branyon clay can stick to the reamer, so we use staged reaming and plan the pull beneath FM 971 for the day the hole is opened.
  2. The survey maps heavy clay throughout Granger; we watch fluid returns near streets such as Guadalupe Street to avoid pressure lifting pavement.
  3. Before the drill approaches a marked line beneath Commerce Street, we hydrovac pothole it because surface paint does not reveal its depth.
  4. We track the drill head from the surface and log depth and pitch along routes near Texas State Highway 95.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

What is in the way of a new line in Granger near FM 971?

FM 971 and Texas State Highway 95 each have mapped roadway within Granger, so a route beneath either one needs to account for highway pavement and right of way. The city’s street network includes 24.67 public road centerline miles. Guadalupe Street is the longest named street at 1.44 miles, followed by Rio Grande Street at 1.1 miles and Commerce Street at 0.87 miles. A bore beneath one of these roads can leave pavement and sidewalks uncut, with work pits set in the dirt on each side.

CrossingTypeMapped extentWho has a say
FM 971State highway0.9 roadway miles insideState highway office
Texas State Highway 95State highway0.9 roadway miles insideState highway office
Union PacificRailroad1.46 track miles insideThe railroad
Georgetown RailroadRailroad0.19 track miles insideThe railroad
Wills CreekStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Yankee BranchStream nearby0.8 miles outsideChecked for Corps of Engineers jurisdiction
Opossum CreekStream nearby0.8 miles outsideChecked for Corps of Engineers jurisdiction
Railroad ReservoirLake or pond7 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 1.46 track miles in Granger, and Georgetown Railroad has 0.19 track miles; 3 street and rail crossings are mapped in the city. Wills Creek lies 0.4 miles from the limits, while Yankee Branch and Opossum Creek are each 0.8 miles away. No named stream crosses a mapped city street. The survey also maps 1.15 miles of unnamed drainage within Granger, so drainage routes may matter even where no named creek crossing is shown.

Who has to sign off on a Granger bore near Union Pacific track?

For a bore under FM 971 or Texas State Highway 95, TxDOT’s Austin District reviews the utility permit because both are state highways in Granger. Cover requirements help set the bore depth: electric and communication lines need 60 inches at a highway crossing, water lines need 60 inches, and pressurized sewer lines need 60 inches. The line owning utility submits the application through TxDOT’s RULIS system; we prepare the bore plan and profile and work under the owner’s permit. Union Pacific track also requires an agreement with the railroad, and a Wills Creek crossing is checked for federal jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground near the City of Granger water system?

The City of Granger public water system draws from groundwater wells and reports 638 service connections serving 1,914 people. That system gives a proposed water bore near Guadalupe Street a known utility owner to check before the route is set. Electric service reporters in Williamson County include Oncor Electric Delivery Company, Austin Energy, City of Georgetown, Bartlett Electric Cooperative, Bluebonnet Electric Cooperative and Pedernales Electric Cooperative. We confirm the electric line owner for the address before planning a conduit bore.

Line ownerWhat it isSourceSize
City of GrangerPublic water systemGroundwater wells638 connections, 1,914 people served
Oncor Electric Delivery Company, Austin Energy, City of Georgetown, Bartlett Electric Cooperative, Bluebonnet Electric Cooperative and Pedernales Electric CooperativeElectric utilities reporting service in Williamson CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Granger’s median housing year at 1967; 47 percent of housing was built before 1960, 41 percent from 1960 to 1999, and 12 percent in 2000 or later. That mix can mean a job beneath Commerce Street is replacing older pipe, adding a newer service, or both. We hydrovac pothole each marked utility on the bore path before drilling near it, since locate paint does not show depth.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

How far is Granger from Taylor and our Yukon office?

Granger is in Williamson County, at an elevation of 573 feet, and covers 0.67 square miles. For underground work in Granger, ZIP code 76530 identifies the city the service area covers and helps keep project location records aligned. Bartlett is 5.3 miles north, Weir is 9.4 miles west, and Taylor is 10.1 miles south; Taylor is the nearest larger city. Georgetown, the county seat, is 15.7 miles west. From our Yukon, Oklahoma yard, the road distance is 362 miles and the drive is 7.1 hours, which can affect mobilization for a bore beneath FM 971 or a Granger street.

Places near Granger

What kinds of bores come up around Granger and Wills Creek?

  • Highway crossing: A bore beneath FM 971 can keep the road surface intact, with depth and pavement requirements included in the plan.
  • Rail crossing: A route beneath Union Pacific track needs the railroad’s agreement and its crossing conditions before drilling is scoped.
  • Water service: A new connection near Guadalupe Street can be routed to suit the City of Granger groundwater system and marked lines.
  • Fiber conduit: A run beneath Commerce Street can avoid an open cut, with marked utilities exposed before drilling near them.
  • Creek crossing: A proposed route beneath nearby Wills Creek needs channel planning and a check for federal jurisdiction.
  • Street service: A bore near Willis Street can place water, sewer or electric conduit without cutting the pavement.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Granger bore near Willis Street?

For a quote, start with the Granger address or a map pin, such as a route near Willis Street. Tell us what will go underground, like water or fiber, then the pipe or conduit size and the footage. A sketch or plans showing the route beneath FM 971, a street or a track help us see crossings and access before we scope the job.

Ground conditions are one part of the price: Branyon clay can change reaming and fluid needs. Crossings are another: FM 971 pavement, Union Pacific track, marked utilities and any creek or drainage route can add exposure or planning work. Logistics also matter, including pits, excavator time, concrete or pavement, emergency timing and the 362 road miles from Yukon. The route length and pipe size help us judge the work alongside those local conditions.

Questions people ask about boring in Granger

Does Trinity take directional boring work in Granger, Williamson County, and who staffs it?

Trinity takes directional boring work in Granger, Williamson County, using our crews and satellite yards operated by drilling partners we have vetted. You work with Trinity from the first call through the bore log, whether a crew is working near FM 971 or another Granger street.

Who approves a bore under FM 971 in Granger?

For a crossing beneath FM 971, the utility that owns the line submits the utility permit through TxDOT’s RULIS system, and the TxDOT Austin District reviews it. We prepare the bore plan and profile and work under the permit issued to the owner; the contractor does not submit that application.

What does boring under Union Pacific track require in Granger?

A bore beneath Union Pacific’s 1.46 track miles in Granger requires an agreement from the railroad. That agreement sets crossing conditions such as casing, depth and flagging. Georgetown Railroad also has track in the city, so the track owner must be identified for the specific crossing.

Can a directional bore pass beneath Wills Creek near Granger?

Yes, a line may be planned beneath Wills Creek using directional boring, subject to route and channel conditions. Wills Creek is 0.4 miles from Granger’s limits, and creek crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning.

Who runs Granger’s public water system, and does its supply come from groundwater wells?

The City of Granger owns the public water system, and its groundwater wells make water source checks relevant to underground work in Granger. The system reports 638 service connections and a population served of 1,914. A proposed bore near Guadalupe Street should account for the system and its existing lines.

Which electric line owner should I check in Granger, Williamson County?

No single provider should be assumed for every Granger address. Williamson County service reporters include Oncor Electric Delivery Company, Austin Energy, City of Georgetown, Bartlett Electric Cooperative, Bluebonnet Electric Cooperative and Pedernales Electric Cooperative. Confirm the line owner for the address before setting conduit specifications for a route near Commerce Street.

Can I reach Trinity after hours about an urgent bore near Commerce Street in Granger?

Trinity answers its phone 24 hours a day for urgent work near Commerce Street or elsewhere in Granger. We can discuss the location and line involved, then assess access and crossings such as FM 971. The route details help define what the emergency bore requires.

How much notice does Texas811 need for a Granger bore near Guadalupe Street?

For work near Guadalupe Street, request a locate through Texas811 at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If the start slips more than 14 days past the original notice, make a new request; refresh worn or moved marks through Texas811 before work continues.

What affects the cost of directional boring under FM 971 in Granger?

The scope of a bore beneath FM 971 sets the work involved. Branyon clay can affect drilling and reaming; pavement, exposed utility crossings, pits, excavator time and pipe size also matter. Creek or drainage crossings and mobilization from Yukon can add planning or logistics needs.

Where the Granger facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Granger

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Granger, Texas

Type the address of your job in Granger. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Granger

Same county: Round Rock · Georgetown · Leander · Cedar Park · Austin · Hutto · Brushy Creek · Liberty Hill · Jarrell · Serenada · Florence · Thrall. All counties: Texas county list.