Ben Wheeler Texas Directional Boring: Wolfpen Loamy Fine Sand, Turkey Creek and FM 279
Quick Answer: Ben Wheeler is an unincorporated community, so County Road 4601 is a county road rather than a city street. Trinity takes directional boring, also called horizontal directional drilling (HDD), work in Texas for routes crossing Turkey Creek and FM 279. Ben Wheeler is 290 road miles from our Yukon, Oklahoma main office, a distance relevant to mobilization for a County Road 4601 bore. Wolfpen loamy fine sand covers 42 percent of the mapped area, so loose ground can cave behind a drill head.
Ben Wheeler bores at a glance
- Unincorporated community in Van Zandt County, Texas. Population 456 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 290 miles, about 5.7 hours of driving.
- Ground: Wolfpen soil is mapped on 42 percent of the area, with sandy clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: FM 279, FM 858, Texas State Highway 64 and FM 773. State permit office: TxDOT Tyler District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Turkey Creek, Prairie Creek, Horsley Creek and Browning Creek.
- Public water: Ben Wheeler Water Supply Corporation, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring along County Road 4601 in Ben Wheeler?
Ben Wheeler is an unincorporated community in Van Zandt County, so County Road 4601 belongs to the county rather than a city government. The Census Bureau counted 456 residents in the 2020 Census; it does not publish yearly estimates for unincorporated places. We bore water, sewer, gas, electric conduit and fiber beneath roads such as County Road 4601 or along FM 279, depending on the route.
Our main office is in Yukon, Oklahoma, and Ben Wheeler work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Trinity is a family business that started in 1965 and has done directional boring since 1982. We have had no utility strike in over 25 years, a record relevant to work around Ben Wheeler Water Supply Corporation lines and the electric systems reporting in Van Zandt County.

How does Wolfpen soil affect directional boring in Ben Wheeler?
The USDA soil survey maps Wolfpen loamy fine sand across 42 percent of Ben Wheeler, the largest mapped soil series here. At the surface, loamy fine sand covers 51 percent of the mapped area, while fine sandy loam covers 27 percent. About 40 inches below the surface, sandy clay loam is mapped under 57 percent of the area, with clay under 14 percent. Wolfpen, Manco, Pickton and Kirvin map soil patterns here, not test borings, so we confirm ground conditions before boring. The sandy surface can loosen behind the drill, so the hole needs fluid support and staged reaming before pipe is pulled through.
| USDA soil survey, inside the Ben Wheeler mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Wolfpen 42 percent, Manco 11 percent, Pickton 10 percent, Kirvin 9 percent and Leagueville 8 percent |
| Texture at the surface | loamy fine sand 51 percent, fine sandy loam 27 percent and loam 11 percent |
| Texture about 40 inches down | sandy clay loam 57 percent, clay 14 percent and loam 11 percent |
| Engineering class about 40 inches down | clayey sand (SC) 56 percent, lean clay (CL) 20 percent and fat clay (CH) 14 percent |
| Average clay content about 40 inches down | 26 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 31 percent of the area |
| Flood prone soils | 11 percent of the area |
| High corrosion risk for uncoated steel | 34 percent of the area |
Bedrock is not mapped in the top five feet of Ben Wheeler, though the Queen City Sand geologic unit is mapped here and dates to the Eocene. Seasonal water tables are mapped within 60 inches across 31 percent of the area, so pits may need pumping. Flood prone soils cover 11 percent, a concern near Turkey Creek. High steel corrosion risk is mapped across 34 percent, so the line owner should consider casing and tracer wire materials; HDPE does not share that steel corrosion concern.
How do we bore Ben Wheeler’s sandy clay loam along FM 279?
For Ben Wheeler’s mapped sandy clay loam and Wolfpen fine sand, we support the bore with drilling fluid and ream in stages. The route and wet ground near Turkey Creek guide pit placement and the drilling plan.
- Wolfpen loamy fine sand covers 42 percent of Ben Wheeler, so we support the opening with drilling fluid and ream in stages to limit sloughing.
- With sandy clay loam mapped under 57 percent of the area about 40 inches down, we monitor the bore path and keep pipe ready for the final ream.
- Seasonal water tables are mapped within 60 inches across 31 percent of Ben Wheeler, so pits near Turkey Creek may need to be kept small and pumped.
- We track the drill head from the surface and log depth and pitch, especially where a County Road 4601 route approaches marked utilities.

Which roads and creeks can a Ben Wheeler bore cross near Turkey Creek?
Ben Wheeler has four state routes inside its mapped community boundary: FM 279, FM 858, Texas State Highway 64 and FM 773. Their mapped roadway lengths inside the community are 3.0, 2.7, 2.4 and 0.6 miles, respectively. A bore under one of these routes needs a different plan from a crossing under county roads. County Road 4601 runs 1.48 miles inside the community, County Road 4501 runs 1.05 miles and County Road 4406 runs 0.88 miles. Those street and highway crossings can be bored without cutting their surfaces.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 279 | State highway | 3 roadway miles inside | State highway office |
| FM 858 | State highway | 2.7 roadway miles inside | State highway office |
| Texas State Highway 64 | State highway | 2.4 roadway miles inside | State highway office |
| FM 773 | State highway | 0.6 roadway miles inside | State highway office |
| Turkey Creek | Stream | 1.77 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Prairie Creek | Stream | 0.84 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Horsley Creek | Stream | 0.35 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Browning Creek | Stream | 0.03 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Harsleys Creek | Stream nearby | 0.2 miles outside | Checked for Corps of Engineers jurisdiction |
| Slater Creek | Stream nearby | 0.5 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad tracks or street and rail crossings are mapped inside Ben Wheeler, and no lakes or ponds are mapped within one mile. Turkey Creek runs 1.77 channel miles inside the community; Prairie Creek runs 0.84 and Horsley Creek runs 0.35. Nine mapped street crossings pass over named streams. A bore near Turkey Creek or another creek needs a route that accounts for the channel and the ground at each bank.
Who approves a Ben Wheeler bore in Van Zandt County?
Ben Wheeler has no city government, so County Road 4601 and County Road 4406 are county roads, while FM 279, FM 858 and Texas State Highway 64 are state routes. For work in a state highway right of way, the line owner, not the driller, applies through TxDOT’s online RULIS system. The TxDOT Tyler District reviews the filing, and we provide the bore plan and profile for the owner’s application. TxDOT cover rules set highway crossing depths at 60 inches for electric, communication and water lines, and pressurized sewer; the district can set another depth in the permit. Turkey Creek crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities serve Ben Wheeler Water Supply Corporation lines?
Ben Wheeler Water Supply Corporation gets water from groundwater wells and reports 1,103 service connections serving 3,324 people. For electric conduit work near County Road 4601, we confirm the line owner before planning the bore. Utilities reporting electric service in Van Zandt County include Oncor Electric Delivery Company, Southwestern Electric Power, Texas-New Mexico Power, Farmers Electric Cooperative, Trinity Valley Electric Cooperative and Wood County Electric Cooperative. That countywide list does not identify the provider at every address.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Ben Wheeler Water Supply Corporation | Public water system | Groundwater wells | 1,103 connections, 3,324 people served |
| Oncor Electric Delivery Company, Southwestern Electric Power, Texas-New Mexico Power, Farmers Electric Cooperative, Trinity Valley Electric Cooperative and Wood County Electric Cooperative | Electric utilities reporting service in Van Zandt County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey estimates covering 2019 to 2023 put Ben Wheeler’s median housing year at 2002. Four percent of housing units were built before 1960, 34 percent from 1960 to 1999 and 62 percent in 2000 or later. A replacement bore along County Road 4501 may pass older buried lines even where nearby homes are newer. We hydrovac pothole marked utilities on the route before drilling near them because locate paint shows position, not depth.

Where is Ben Wheeler in relation to Lindale and Yukon?
Ben Wheeler is in Van Zandt County, 12.0 miles southeast of county seat Canton, and its mapped area is 3.0 square miles. The community sits at 516 feet elevation and uses ZIP code 75754. Callender Lake is 5.8 miles south, Van is 6.5 miles northeast and Edom is 7.4 miles southeast. Lindale, the nearest larger city, is 17.5 miles east. From our Yukon, Oklahoma main office, Ben Wheeler is 290 road miles away, a 5.7 hour drive that can affect mobilization for work near FM 279.
Places near Ben Wheeler
- Directional boring in Callender Lake: 5.8 miles south
- Directional boring in Van: 6.5 miles northeast
- Directional boring in Edom: 7.4 miles southeast
- Directional boring in Brownsboro: 11.5 miles southeast
- Directional boring in Canton: 12 miles northwest
- Directional boring in Lindale: 17.5 miles east
Which jobs call for a bore near County Road 4406 in Ben Wheeler?
- Highway crossing: A bore beneath FM 279 can keep the road surface intact while the route and cover are planned for the state right of way.
- Water service: A service connection near County Road 4601 can tie into a route served by Ben Wheeler Water Supply Corporation groundwater wells.
- Fiber drop: A conduit bore along County Road 4406 can carry fiber beneath the road without opening a trench across its surface.
- Creek crossing: A route beneath Turkey Creek needs planning for the channel, its banks and possible Corps jurisdiction review.
- Replacement line: A water or sewer bore near County Road 4501 can avoid open cutting while marked buried lines are exposed first.
- Electric conduit: The line owner is confirmed before a conduit bore near FM 858 because several utilities report electric service in Van Zandt County.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for a Ben Wheeler bore near FM 279?
A map pin beside FM 279 or Turkey Creek matters because the exact route determines which pavement, drainage and utilities the bore may encounter. For a County Road 4601 crossing, send us the address or pin, planned pipe or conduit size, and footage so we can scope the bore. A sketch or plans help us check the route and prepare a scope for a Ben Wheeler job.
The route and ground set the price, with Wolfpen fine sand and sandy clay loam important because they affect hole support and reaming. Creek or drainage crossings such as Turkey Creek add planning, and a state route such as FM 279 can bring permit and cover requirements. Price also reflects pipe size, length, marked utilities that need exposure, pavement, pits, excavator time and sand backfill. High profile or emergency work changes the scope, as does mobilization over 290 road miles from Yukon.
Questions people ask about boring in Ben Wheeler
Does Trinity take directional boring jobs in Ben Wheeler and Van Zandt County?
Yes, Trinity takes directional boring work in Ben Wheeler and across Texas. Our own crews do the work, and partner drilling contractors from satellite yards support jobs when needed. Trinity vets those contractors, and customers deal with Trinity through the bore log, including for a route near County Road 4601.
Who controls County Road 4406 in Ben Wheeler, and does it need to be cut?
County Road 4406 is a county road because Ben Wheeler is an unincorporated community with no city government. A directional bore can pass beneath it without cutting the road surface. The mapped community also has state routes such as FM 279, where a right of way permit is handled differently.
How old are homes and buried lines near County Road 4501 in Ben Wheeler?
The American Community Survey estimates covering 2019 to 2023 put the median housing year at 2002, with 4 percent of units built before 1960. A replacement bore near County Road 4501 can still encounter older buried utilities. We expose marked lines with hydrovac potholing before drilling near them.
Can groundwater or flooding affect bore pits by Turkey Creek in Ben Wheeler?
Yes. The USDA soil survey maps seasonal water tables within 60 inches across 31 percent of Ben Wheeler, and flood prone soils across 11 percent. Near Turkey Creek, pits may need pumping and the crossing route must account for the channel. Creek crossing plans are checked for possible U.S. Army Corps of Engineers jurisdiction.
Does Wolfpen soil in Ben Wheeler corrode steel, and what pipe can we use?
The USDA soil survey maps high steel corrosion risk across 34 percent of Ben Wheeler. The line owner chooses materials and any coating for steel casing or tracer wire. HDPE is not affected by soil corrosion, so pipe choice can reflect the line owner’s design and the route near roads such as County Road 4601.
What ground does a bore pass through in Wolfpen soil in Ben Wheeler?
Wolfpen loamy fine sand is mapped across 42 percent of Ben Wheeler. About 40 inches below the surface, sandy clay loam is mapped under 57 percent of the area, with clay under 14 percent. These are USDA soil survey patterns rather than test borings, so the actual route near Turkey Creek still needs field planning.
Can I call after hours about an urgent bore near County Road 4406 in Ben Wheeler?
Yes. A person answers Trinity’s phone 24 hours a day at (405) 409-7423, including for an urgent job near County Road 4406. Trinity also provides 24 hour emergency response. The address or map pin helps us understand whether the work is near a county road, FM 279 or a creek.
How much 811 notice is needed for a Ben Wheeler bore along County Road 4601?
Texas811 needs a locate request at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If a County Road 4601 start slips more than 14 days past the original notice, make a new request. At a Turkey Creek crossing, we pause work and have worn or moved marks refreshed through Texas811 before boring continues.
What affects the price of a directional bore near FM 279 in Ben Wheeler?
The route, length, pipe or conduit size and Wolfpen soil conditions all affect the price. A Turkey Creek crossing, pavement or utilities that need exposure can add work. A bore along FM 279 also needs planning for the state right of way, and mobilization reflects the 290 road miles from Yukon.
Where the Ben Wheeler facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Ben Wheeler
- U.S. Census Bureau, TIGER/Line 2024: Ben Wheeler boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Ben Wheeler population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Ben Wheeler housing units and year built
- Macrostrat geologic map compilation: map units under Ben Wheeler
- U.S. EPA Safe Drinking Water Information System: public water systems serving Ben Wheeler
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Van Zandt County
- U.S. Geological Survey, Elevation Point Query Service: Ben Wheeler elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Ben Wheeler
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Ben Wheeler
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Ben Wheeler, Texas
Type the address of your job in Ben Wheeler. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Ben Wheeler
Same county: Wills Point · Grand Saline · Edgewood · Myrtle Springs · Fruitvale. All counties: Texas county list.
