San Carlos I Texas Directional Boring: Maverick Clay, Highway 359, CPKC Rail
Quick Answer: Texas State Highway 359 runs along or touches the San Carlos I community boundary, and Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for crossings here. Emiliano Road is part of the route network, while our Yukon, Oklahoma main office is 643 road miles away. The USDA soil survey maps clay across the area, so sticky cuttings and fluid returns need close attention. CPKC (Kansas City Southern) also runs along or touches the boundary.
San Carlos I bores at a glance
- Unincorporated community in Webb County, Texas. Population 187 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 643 miles, about 12.4 hours of driving.
- Ground: Maverick soil is mapped on 60 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 60 percent of the area.
- No state or US highway is mapped inside the boundary. Closest: Texas State Highway 359.
- Railroad track inside the boundary: none mapped.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can I call for directional boring on Emiliano Road in San Carlos I?
Trinity Boring Solutions takes directional boring work in San Carlos I, Webb County, including proposed lines along Emiliano Road and other mapped streets. Texas State Highway 359 runs along or touches the community boundary, so a route near it needs crossing review. The Census Bureau counted 187 people here in the 2020 Census. We install water, sewer, gas, electric conduit and fiber lines for routes such as a service connection along Tanquecitos Road.
Our main office is in Yukon, Oklahoma, and San Carlos I work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We started as a family business in 1965, and directional boring has been part of our work since 1982. Four decades of drilling experience shapes how we manage sticky clay like the soil mapped around Emiliano Road.

How does Maverick soil affect a bore in San Carlos I?
Maverick soil makes up 60 percent of the mapped area in San Carlos I, and Catarina accounts for 40 percent. The USDA soil survey maps clay at the surface and at about 40 inches below it across the area. At that depth, average clay content is 50 percent, and the mapped soil classification is CH. For San Carlos I, we use mapped soil patterns as planning context, not as a substitute for test borings. For a bore, that clay can hold an open hole but stick to the reamer, so fluid and reaming need control.
| USDA soil survey, inside the San Carlos I mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Maverick 60 percent and Catarina 40 percent |
| Texture at the surface | clay 100 percent |
| Texture about 40 inches down | clay 100 percent |
| Engineering class about 40 inches down | fat clay (CH) 100 percent |
| Average clay content about 40 inches down | 50 percent |
| Bedrock mapped within 60 inches | 60 percent of the area (0 percent hard rock, 60 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 40 percent of the area |
| High corrosion risk for uncoated steel | 100 percent of the area |
The USDA soil survey maps bedrock within five feet across 60 percent of San Carlos I; the mapped bedrock is weathered, while hard bedrock is not mapped in that depth. No seasonal water table is mapped within 60 inches, but flood prone soils cover 40 percent. High steel corrosion risk is mapped across the area, so the line owner should consider casing and tracer wire materials. The Yegua Formation, of Bartonian age, includes sandstone and clay; the mapped weathered rock can slow drilling where the bore reaches it.
What does it take to bore clay in San Carlos I?
San Carlos I clay calls for controlled drilling fluid and staged reaming. Along Emiliano Road, we expose marked utilities before the drill gets near them, then track the head as the bore advances.
- In San Carlos I clay, we use a controlled fluid mix and staged reaming so sticky cuttings do not pack the reamer or grip the pipe.
- Before a bore near Amy Road, we hydrovac expose each marked utility on the route because surface marks do not show its depth.
- We track the drill head from above ground and log depth and pitch as it advances beneath the mapped roads of San Carlos I.
- Where weathered Yegua Formation rock meets clay, we slow the cut and check the head path closely as ground conditions change.

Where does a line have to go under Texas State Highway 359 in San Carlos I?
Texas State Highway 359 runs along or touches the San Carlos I community boundary, making it the main named highway crossing to assess for a route here. No state highway is mapped inside the community. Emiliano Road is the longest named street at 0.73 miles, followed by Tanquecitos Road at 0.69 miles and Escandon Road at 0.33 miles. Amy Road adds another 0.3 miles. These local streets help define where a service route may meet the highway edge or need a street crossing.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Texas State Highway 359 | Highway nearby | Runs along or touches the city limits | State highway office |
| CPKC (Kansas City Southern) | Railroad nearby | 0 miles outside | The railroad |
| Gault Tank | Lake or pond | 5 acres, nearby | Checked for Corps of Engineers jurisdiction |
CPKC (Kansas City Southern) runs along or touches the San Carlos I boundary, so a proposed track crossing needs railroad coordination. No mapped street and rail crossing is shown inside the community. No streams are mapped inside or within one mile, and no named stream crossings are mapped. Gault Tank, a 5 acre pond, lies outside the community boundary; if a route reaches it, its location should be considered during planning.
Who has to sign off on a bore in Webb County near San Carlos I?
San Carlos I is an unincorporated community, so its streets are not managed by a city government; the county or state has jurisdiction according to the road. For work in the Texas State Highway 359 right of way, electric and communication lines need 60 inches of cover at a crossing and 48 inches when running along it. Water lines need 60 inches at a crossing and 36 inches along the right of way; pressurized sewer needs 60 inches at a crossing. The utility owner applies through TxDOT RULIS, and the TxDOT Laredo District reviews the filing. We prepare the bore plan and profile for the owner’s application. A CPKC track crossing also requires an agreement with the railroad.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utility lines should we check in Webb County near San Carlos I?
Before we plan a bore in San Carlos I, we confirm the address’s water provider with the county or local water district. EPA drinking water records do not tie a system to this place by name. AEP Texas Central, Medina Electric Cooperative and Rio Grande Electric Cooperative report electric service in Webb County, but the line owner for the address must be confirmed before planning an electric conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| AEP Texas Central, Medina Electric Cooperative and Rio Grande Electric Cooperative | Electric utilities reporting service in Webb County | EIA Form 861 | Confirm the line owner by address |
Housing figures are not published for a place as small as San Carlos I, so a route along Emiliano Road may serve a long connection or a nearby service rather than a large housing block. Webb County averages 21.0 inches of precipitation a year, with September the wettest month at 3.9 inches on average. Before drilling near a marked utility, we hydrovac pothole it to check its depth; paint alone does not show how deep it sits.

How far is San Carlos I from Laredo Ranchettes West?
San Carlos I is in Webb County, at an elevation of 544 feet, and covers 0.13 square miles. ZIP code 78043 serves the community. Laredo Ranchettes West is 0.2 miles east, San Carlos II is 0.3 miles east, and Ranchitos East is 0.4 miles east. Laredo, the county seat and nearest larger city, is 8.6 miles northwest. From our Yukon, Oklahoma main office, the route is 643 road miles and a 12.4 hour drive, a distance that can affect mobilization for work near Tanquecitos Road.
Places near San Carlos I
- Laredo Ranchettes West: 0.2 miles east
- Directional boring in San Carlos II: 0.3 miles east
- Directional boring in Ranchitos East: 0.4 miles east
- Directional boring in Tanquecitos South Acres: 0.4 miles west
- Directional boring in Los Altos: 0.8 miles west
- Directional boring in Laredo: 8.6 miles northwest
What boring work comes up near Tanquecitos Road in San Carlos I?
- Highway crossing: A bore beneath Texas State Highway 359 avoids cutting across its pavement, with the route and cover set through TxDOT review.
- Water service: A proposed connection along Emiliano Road starts with confirming the address water provider and locating existing lines on the route.
- Fiber conduit: A route beside Tanquecitos Road can use a bore to pass beneath driveways without opening a trench across each approach.
- Rail crossing: A proposed line near the CPKC boundary needs railroad coordination before the crossing route and installation details are settled.
- Electric conduit: Near Amy Road, we confirm the line owner and expose marked utilities before drilling close to the planned conduit route.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for a San Carlos I bore near CPKC (Kansas City Southern)?
For a San Carlos I quote, send the address or map pin, what will go underground, the pipe or conduit size and the footage. A sketch or plan showing a route along Emiliano Road or near Texas State Highway 359 helps us see the crossings and access points before we scope the work.
In San Carlos I, we price each bore according to its job details and scope. Maverick clay can mean staged reaming and careful fluid management, while a Texas State Highway 359 crossing brings permit and cover requirements into the plan. A CPKC (Kansas City Southern) crossing adds railroad coordination. Length, pipe size, exposed utilities, pavement, pits and excavator time also affect the scope. The 643 road miles from Yukon matter for mobilization, and high profile or emergency work can change the work plan.
Questions people ask about boring in San Carlos I
Does Trinity Boring Solutions take jobs in San Carlos I, Webb County, and who staffs them?
Yes, we take directional boring jobs in San Carlos I, Webb County. Work is handled by our own crews or from satellite yards run by partner drilling contractors we have personally vetted. You work with Trinity from the first call through the bore log, whichever crew is on site, including for a route along Emiliano Road.
Could groundwater or flooding affect a bore pit in San Carlos I near Maverick soil?
The USDA soil survey does not map a seasonal water table within 60 inches in San Carlos I, but flood prone soils cover 40 percent of the area. That does not replace a site check for a pit near Tanquecitos Road. We plan pit placement and drainage around the actual route and conditions.
Does Maverick soil in San Carlos I corrode steel, and what pipe should I use?
The USDA soil survey maps high steel corrosion risk across San Carlos I, including soil around Emiliano Road. The line owner should consider protection for steel casing and tracer wire. HDPE is not affected by that soil corrosion concern; the owner selects the material and any coating for the installation.
What ground does a bore pass through in San Carlos I, especially Maverick soil?
Maverick soil covers 60 percent of mapped San Carlos I, with Catarina making up 40 percent. The USDA soil survey maps clay at about 40 inches across the area, with average clay content of 50 percent there. Those are soil map patterns, not test borings, so the actual route still guides drilling decisions.
Is bedrock present in San Carlos I, and how much is mapped within five feet?
The USDA soil survey maps bedrock within five feet across 60 percent of San Carlos I, and that mapped bedrock is weathered. Hard bedrock is not mapped within five feet. The Yegua Formation includes sandstone and clay, so a bore can slow where it meets weathered rock near a planned route.
Who approves a San Carlos I bore under Texas State Highway 359?
The utility owner applies for right of way work through TxDOT’s RULIS system, and the TxDOT Laredo District reviews the application. For a crossing under Texas State Highway 359, the owner’s permit sets the approved conditions, and we provide the bore plan and profile for that filing.
What bore sizes and lengths can you handle for a San Carlos I job near Amy Road?
We handle San Carlos I lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. For a proposed run near Amy Road, the required size and footage help determine the equipment and plan. A sketch is useful when the route has several marked utilities.
How early should I call Texas811 for a bore on Emiliano Road in San Carlos I?
Count back at least two working days from the planned start on Emiliano Road; Saturdays, Sundays and legal holidays do not count. The request cannot be made more than 14 days ahead. If the start slips more than 14 days past the original notice, make a new request, and ask Texas811 to refresh marks that wear off or move.
What affects the price of a San Carlos I directional bore near Texas State Highway 359?
Price depends on the route and work, not just the footage. Maverick clay, pipe size, utilities to expose, pavement and pits all affect the job. A Texas State Highway 359 crossing adds permit planning, and a CPKC boundary crossing can require railroad coordination. Yukon is 643 road miles away, so we account for that distance when planning mobilization for San Carlos I work.
Where the San Carlos I facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside San Carlos I
- U.S. Census Bureau, TIGER/Line 2024: San Carlos I boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: San Carlos I population count
- Macrostrat geologic map compilation: map units under San Carlos I
- U.S. Department of Transportation, North American Rail Network: track owners in Webb County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Webb County
- U.S. Geological Survey, Elevation Point Query Service: San Carlos I elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to San Carlos I
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in San Carlos I
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in San Carlos I, Texas
Type the address of your job in San Carlos I. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for San Carlos I
Same county: Rio Bravo · El Cenizo · Ranchos Penitas West · Pueblo Nuevo · Bruni · Mirando City · Oilton · La Presa · Colorado Acres · Ranchitos Las Lomas · Los Arcos · Botines. All counties: Texas county list.
