trinityboringsolutions.com

Annetta North Texas Directional Boring: Brackett Soil, FM 5 and Union Pacific

Quick Answer: Brackett soil can stick to a reamer, and Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for routes near the Union Pacific tracks in Annetta North, Texas. The town is 236 road miles from our Yukon, Oklahoma main office, with FM 5 running through it. Clay loam is the leading surface texture, so sticky cuttings can slow reaming and grip pipe. We plan each bore around the route, ground and marked lines.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Annetta North bores at a glance

  • Incorporated city in Parker County, Texas. Population 627 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 236 miles, about 4.8 hours of driving.
  • Ground: Brackett soil is mapped on 25 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 54 percent of the area.
  • Highways inside the boundary: FM 5. State permit office: TxDOT Fort Worth District.
  • Railroad track inside the boundary: Union Pacific, with 6 mapped street and rail crossings.
  • Named streams inside the boundary: Clear Fork Trinity River, Burgess Creek, South Fork Trinity River and Town Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring in Annetta North near Union Pacific?

Trinity Boring Solutions takes directional boring work in Annetta North, where Brackett soil can stick to a reamer. Clay loam can hold an open hole, but sticky cuttings need attention. The Census Bureau Vintage 2024 estimate puts the town at 627 people in Parker County. We install water, sewer, gas, electric conduit and fiber on routes along streets such as Annetta Centerpoint Road and Jenkins Road.

Our main office is in Yukon, Oklahoma, and Annetta North work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have bored since 1982, bringing four decades of experience to the clay and weathered bedrock mapped near FM 5. That experience informs how we plan reaming and pipe pullback for each route.

Horizontal directional drill rig set up on an open grass field with support trucks and a vacuum excavation truck
Our horizontal directional drill set up in an open field with the support trucks and the vacuum excavation truck. Photos on this page are from our jobs in Oklahoma and Texas.

What ground should I expect for a bore in Annetta North with Brackett soil?

The USDA soil survey maps Brackett soil across 25 percent of Annetta North, and its clay can cling to the reamer. Frio accounts for 16 percent and Windthorst for 14 percent of mapped soil series. Clay loam covers 43 percent of the surface, while fine sandy loam covers 15 percent and silty clay 14 percent. At about 40 inches below the surface, the survey maps bedrock texture across 28 percent of the area and reports average clay content of 29 percent. These are mapped patterns, not test borings.

USDA soil survey, inside the Annetta North city limitsWhat is mapped
Soil series mappedBrackett 25 percent, Frio 16 percent, Windthorst 14 percent, Venus 13 percent and Duffau 8 percent
Texture at the surfaceclay loam 43 percent, fine sandy loam 15 percent and silty clay 14 percent
Texture about 40 inches downbedrock 28 percent, silty clay loam 14 percent and clay loam 12 percent
Engineering class about 40 inches downlean clay (CL) 45 percent, fat clay (CH) 22 percent and silty clay (CL ML) 4 percent
Average clay content about 40 inches down29 percent
Bedrock mapped within 60 inches54 percent of the area (3 percent hard rock, 51 percent weathered rock)
Seasonal water table within 60 inches2 percent of the area
Flood prone soils17 percent of the area
High corrosion risk for uncoated steel25 percent of the area

The USDA soil survey puts typical bedrock depth at 26 inches, with bedrock within 60 inches across 54 percent of Annetta North; most of that is weathered bedrock, so drilling may slow at the soil contact. Seasonal water table is mapped within 60 inches across 2 percent, while flood prone soils cover 17 percent near streams such as Clear Fork Trinity River. High steel corrosion risk covers 25 percent, a consideration for steel casing and tracer wire. The geologic map includes Holocene Alluvium and Early Cretaceous sedimentary rock, so the route can move from stream deposits into older material.

How do crews handle Annetta North soil and bedrock?

For an Annetta North bore, we match the reaming plan to Brackett clay and the mapped shallow bedrock, then track the drill head along the route. Clear Fork Trinity River crossings need their own depth and access plan.

  1. Brackett soil can make clay cuttings cling to the reamer, so we use thinner drilling fluid, add polymer as needed and ream in stages.
  2. Where the route reaches bedrock mapped near 26 inches, we slow the advance and select tooling for the ground rather than treating it like open soil.
  3. We hydrovac pothole every marked utility on the bore path before drilling near it; paint along Annetta Centerpoint Road shows position, not depth.
  4. For example, if a bore crosses utilities under Jenkins Road, we expose each marked line before the drill approaches, then track depth and pitch from the surface.
Rock bit on the drill rod at the front of a Vermeer D24x40 S3 with broken sandstone at the entry of a rock bore in Guthrie, OK
Rock bit on the drill rod with broken sandstone at the entry of a rock bore in Guthrie, Oklahoma.

What might a new line cross in Annetta North near Union Pacific?

A bore in Annetta North may need to pass beneath FM 5, which has 0.9 mapped roadway miles inside town limits; Interstate 20 is 0.6 miles outside the limits. Annetta Centerpoint Road is the longest named street in town at 3.15 miles, followed by Quail Ridge Road at 2.42 miles and Jenkins Road at 1.38 miles. A route can use boring to avoid cutting pavement or driveways, with the entry and exit pits placed off the travel surface where access allows.

CrossingTypeMapped extentWho has a say
FM 5State highway0.9 roadway miles insideState highway office
Interstate 20Highway nearby0.6 miles outsideState highway office
Union PacificRailroad2.26 track miles insideThe railroad
Clear Fork Trinity RiverStream2.89 channel miles insideChecked for Corps of Engineers jurisdiction
Burgess CreekStream0.5 channel miles insideChecked for Corps of Engineers jurisdiction
South Fork Trinity RiverStream0.34 channel miles insideChecked for Corps of Engineers jurisdiction
Town CreekStream0.25 channel miles insideChecked for Corps of Engineers jurisdiction
Brogden BranchStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Willow CreekStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Underwood BranchStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Reservoir No 33Stream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Rule Evans Hollow LakeLake or pond38 acres, nearbyChecked for Corps of Engineers jurisdiction
Reservoir No 31Lake or pond30 acres, nearbyChecked for Corps of Engineers jurisdiction
Reservoir No 33Lake or pond19 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 2.26 track miles inside Annetta North, and public mapping shows 6 street and rail crossings in town. A track bore needs an agreement from the railroad owner. Clear Fork Trinity River runs 2.89 channel miles through town; Burgess Creek and South Fork Trinity River also cross it. Mapping shows 4 street crossings of named streams. Rule Evans Hollow Lake is within a mile, outside town limits, so routes near water features need careful planning.

Do I need a permit for a bore under FM 5 in Annetta North?

A bore within FM 5 right of way in Annetta North needs a TxDOT utility permit, reviewed by the Fort Worth District. The utility owner files through RULIS, and we prepare the bore plan and profile for that application. Cover depth depends on the line: electric and communication crossings need 60 inches below the lowest crossed grade, while water crossings need 60 inches and pressurized sewer crossings need 60 inches. Existing highway pavement is bored or tunneled, and crossings are encased. The city itself is responsible for its streets, including Jenkins Road. A Union Pacific track crossing needs the railroad owner’s agreement, and a Clear Fork Trinity River route is checked for federal waterway jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities might a bore encounter in Parker County near Annetta North?

The water provider for a specific Annetta North address must be confirmed with the town, Parker County or the local water district before a bore is planned. EPA drinking water records do not tie a water system to this town, so the provider for an address needs checking directly. Utilities reporting electric service in Parker County include Oncor Electric Delivery Company, Weatherford Municipal Utility System, Tri County Electric Cooperative and Wise Electric Cooperative. We confirm the line owner for the route before planning an electric conduit bore near FM 5.

Line ownerWhat it isSourceSize
Oncor Electric Delivery Company, Weatherford Municipal Utility System, Tri-County Electric Cooperative and Wise Electric CooperativeElectric utilities reporting service in Parker CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Annetta North housing’s median year built at 1996; 7 percent predates 1960, 52 percent dates from 1960 to 1999, and 41 percent was built in 2000 or later. A route along Jenkins Road could serve a newer connection or replace an older line, so the existing utilities matter either way. We hydrovac pothole every marked utility on the bore path before drilling near it.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

Do you cover Annetta North and nearby Annetta?

Annetta North is an incorporated town in Parker County, with 3.78 square miles of land at an elevation of 833 feet. ZIP code 76008 covers the town. Annetta lies 1.8 miles southwest, and Aledo is 2.2 miles southeast; Willow Park is 2.9 miles north. Weatherford, the county seat, is 8.0 miles west. We take work in this part of Texas, and Annetta North is 236 road miles and a 4.8 hour drive from our Yukon, Oklahoma main office, so distance can affect mobilization for a bore near FM 5.

Places near Annetta North

What boring work comes up near Clear Fork Trinity River in Annetta North?

  • Highway crossing: A line beneath FM 5 can be bored to avoid cutting existing pavement, with its cover and casing planned for the utility type.
  • Street service: A water or sewer route along Annetta Centerpoint Road can use pits beside the traveled surface instead of an open cut through pavement.
  • Fiber route: Fiber conduit near Quail Ridge Road can be steered around marked lines, with each utility exposed before the drill nears it.
  • Creek crossing: A bore beneath Clear Fork Trinity River needs a route planned below the channel and a check for federal waterway jurisdiction.
  • Rail crossing: A conduit beneath Union Pacific track needs the railroad owner’s agreement and a plan that follows its crossing conditions.
  • Drainage route: A bore near Burgess Creek can be planned to keep the line beneath the channel and limit disturbance to creek banks.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a bore near Annetta Centerpoint Road in Annetta North?

For a bore near Annetta Centerpoint Road, send the address or map pin, what is going in the ground, pipe or conduit size and footage; a sketch or plans help. The route matters most when it meets the Union Pacific tracks or Clear Fork Trinity River, since those crossings change the bore plan and access. We review the location and scope before setting the work plan.

A short bore along an accessible stretch of Annetta Centerpoint Road can be simpler to plan than a route crossing Union Pacific track or Clear Fork Trinity River. Length, pipe or conduit size, soil and rock, and the number of utilities to expose all affect the work. Pavement, creek crossings, pits, sand backfill and excavator time can add steps. The 236 road miles from Yukon also affect mobilization, as can high profile or emergency work.

Questions people ask about boring in Annetta North

Does Trinity Boring Solutions take directional boring jobs in Parker County near Annetta North?

Yes. We take directional boring work in Annetta North and staff it with our own crews or from satellite yards run by vetted partner drilling contractors. Our Yukon office remains the main point of contact throughout the job. For a route near FM 5, we plan around the mapped clay and existing utilities.

Who approves a bore under FM 5 in Annetta North?

TxDOT reviews a utility bore in FM 5 right of way through its Fort Worth District. The utility owner submits the application in RULIS, with the bore plan and profile prepared for that filing. The required cover depends on the line being installed and the permit conditions for the FM 5 crossing.

What does a bore under Union Pacific track in Annetta North require?

A crossing beneath Union Pacific track requires an agreement from the railroad that owns it. The agreement sets the conditions for that track crossing, including casing, depth and flagging. Public mapping shows 2.26 track miles inside Annetta North, so the proposed route and crossing point need to be identified early.

Can a line be bored beneath Clear Fork Trinity River in Annetta North?

Yes, a bore can be planned beneath Clear Fork Trinity River, subject to route design and a check for U.S. Army Corps of Engineers jurisdiction. The river runs 2.89 channel miles through Annetta North. We plan the line below the channel and account for access and creek banks.

Which electric company should I contact about a conduit bore in Parker County near Annetta North?

The line owner for the specific Annetta North address must be confirmed before planning an electric conduit bore. Parker County electric service reporters include Oncor Electric Delivery Company, Weatherford Municipal Utility System, Tri County Electric Cooperative and Wise Electric Cooperative. Those records do not identify which provider serves every address, so the local owner needs confirmation.

Does Annetta North control Jenkins Road, and will a bore need the street cut?

Annetta North is incorporated, so its city streets, including Jenkins Road, belong to the town itself. A directional bore can pass below a street without cutting its pavement; the entry and exit pits are placed on either side where access allows. The town handles its street permitting.

Can I reach Trinity after hours about an urgent bore near Jenkins Road in Annetta North?

Yes. A person answers our phone 24 hours a day at (405) 409-7423, including after hours for an urgent job near Jenkins Road. Tell us the location and what line needs work so we can understand the request. An emergency scope can affect the planning and resources needed.

How early should I call Texas811 for a bore along Annetta Centerpoint Road in Annetta North?

Count back at least two working days from the planned start for a Texas811 locate request along Annetta Centerpoint Road, excluding Saturdays, Sundays and legal holidays. Do not request it more than 14 days early. If the start slips more than 14 days past the original notice, make a new request; refresh marks that wear off or move before work continues.

What affects the cost of a directional bore near FM 5 in Annetta North?

The price depends on the route and scope, not just its length. For a bore near FM 5, pipe size, clay or bedrock, utilities to expose, pavement, crossing conditions, pits and excavator time all matter. A Union Pacific track or creek crossing can add planning, and the 236 road miles from Yukon affect mobilization.

Where the Annetta North facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Annetta North

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Annetta North, Texas

Type the address of your job in Annetta North. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Annetta North

Same county: Weatherford · Briar · Springtown · Reno · Azle · Fort Worth · Western Lake · Dennis · Cresson · Horseshoe Bend · Peaster · Millsap. All counties: Texas county list.