trinityboringsolutions.com

Annetta Texas Directional Boring: Brackett Soil, FM 5 and Union Pacific

Quick Answer: From our Yukon, Oklahoma main office, Annetta is 236 road miles away, and we take directional boring, also called horizontal directional drilling (HDD), for routes near the Union Pacific tracks. Our own crews and vetted partner contractors handle work around FM 5 and local streets. Brackett soil and clay loam can make the reamer sticky, so the drilling plan accounts for the ground. Along the South Fork Trinity River, a route may also need water crossing review.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Annetta bores at a glance

  • Incorporated city in Parker County, Texas. Population 3,473 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 236 miles, about 4.7 hours of driving.
  • Ground: Brackett soil is mapped on 27 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 70 percent of the area.
  • Highways inside the boundary: FM 5. State permit office: TxDOT Fort Worth District.
  • Railroad track inside the boundary: Union Pacific, with 3 mapped street and rail crossings.
  • Named streams inside the boundary: South Fork Trinity River and Burgess Creek.
  • Public water: Town of Annetta, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring in Annetta, Parker County?

Trinity Boring Solutions takes directional boring work in Annetta, Parker County, including water, sewer, gas, electric conduit and fiber routes along streets such as Old Annetta Road. The Census Bureau Vintage 2024 estimate puts Annetta’s population at 3,473. From our Yukon, Oklahoma main office, the town is 236 road miles away, so the job plan accounts for travel as well as the route.

Our main office is in Yukon, Oklahoma, and Annetta work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore is roughly 4,100 feet of 48 inch pipe beneath the Arkansas River in Tulsa. Against that reach, a bore along Annetta’s 1.4 miles of Lakeview Drive is a smaller local route. We have been a family business since 1965 and have done directional boring since 1982.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

How does Brackett soil affect a bore in Annetta?

Brackett soil is the leading mapped soil series in Annetta, covering 27 percent of the town, and clay loam covers 47 percent of its surface. The USDA soil survey maps bedrock across 41 percent of the area at about 40 inches below the surface, with silt loam mapped there across 24 percent. Average clay content at that depth is 27 percent. These are mapped patterns, not test borings. Clay can hold the hole open but stick to the reamer, so the crew plans staged reaming and suitable drilling fluid.

USDA soil survey, inside the Annetta city limitsWhat is mapped
Soil series mappedBrackett 27 percent, Wise 18 percent, Frio 11 percent, Duffau 9 percent and Maloterre 8 percent
Texture at the surfaceclay loam 47 percent, fine sandy loam 12 percent and silty clay 11 percent
Texture about 40 inches downbedrock 41 percent, silt loam 24 percent and silty clay loam 11 percent
Engineering class about 40 inches downlean clay (CL) 42 percent and fat clay (CH) 13 percent
Average clay content about 40 inches down27 percent
Bedrock mapped within 60 inches70 percent of the area (19 percent hard rock, 50 percent weathered rock)
Seasonal water table within 60 inches2 percent of the area
Flood prone soils11 percent of the area
High corrosion risk for uncoated steel17 percent of the area

The USDA soil survey puts typical bedrock depth at 25 inches, with bedrock within 60 inches across 70 percent of Annetta and hard bedrock across 19 percent. The Walnut Clay geologic unit is Albian and includes clay, limestone and shale, so the bit may meet changing ground. Seasonal water tables within 60 inches are mapped in 2 percent of the area, while flood prone soils cover 11 percent near drainage. High steel corrosion risk covers 17 percent, a material choice for casing and tracer wire.

How is a bore run through Annetta bedrock?

Annetta’s shallow mapped bedrock and clay loam call for a bore plan that adjusts as the drill moves from soil toward rock. We track the head from the surface and log depth and pitch near FM 5 and local streets.

  1. In Brackett soil, we choose fluid and reaming steps to limit sticky clay buildup, then have the pipe ready so the open hole is not left waiting.
  2. Where the USDA soil survey maps bedrock near the surface, we adjust the bit and pace as the bore moves from clay into rock.
  3. Near the South Fork Trinity River, we plan the route and depth around the channel and check water crossing jurisdiction during planning.
  4. At a marked crossing along Old Annetta Road, we use hydrovac potholing to expose utilities before the drill approaches, then track depth and pitch from the surface.
Rod box on the Vermeer D24x40 S3 Navigator with the bore path heading toward the trees on a rock bore in Guthrie, OK
Rod box on our Vermeer D24x40 with the bore path heading toward the trees on a rock bore in Guthrie, Oklahoma.

What does a bore have to cross in Annetta near Union Pacific?

FM 5 is the state highway mapped inside Annetta, with 2.5 roadway miles in town, so a route under it needs highway specific planning. Old Annetta Road is the longest named street at 3.19 miles within town limits. Deer Creek Drive measures 1.9 miles, Lakeview Drive 1.4 miles and O’Neal Avenue 1.37 miles. Those streets give the route options a local frame. Boring can leave pavement and driveways uncut, with entry and exit pits set in dirt where the site allows.

CrossingTypeMapped extentWho has a say
FM 5State highway2.5 roadway miles insideState highway office
Union PacificRailroad1.68 track miles insideThe railroad
South Fork Trinity RiverStream1.01 channel miles insideChecked for Corps of Engineers jurisdiction
Burgess CreekStream0.06 channel miles insideChecked for Corps of Engineers jurisdiction
Turkey CreekStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Reservoir No 33Stream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Clear Fork Trinity RiverStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Hale BranchStream nearby0.9 miles outsideChecked for Corps of Engineers jurisdiction
Lake MulletLake or pond101 acres, nearbyChecked for Corps of Engineers jurisdiction
Rule Evans Hollow LakeLake or pond38 acres, insideChecked for Corps of Engineers jurisdiction
Reservoir No 33Lake or pond19 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific owns 1.68 track miles inside Annetta on the Baird Subdivision, and three street and rail crossings are mapped in town. Any proposed track crossing needs coordination with Union Pacific for its crossing agreement and conditions. The South Fork Trinity River has 1.01 channel miles inside town, and Burgess Creek has 0.06. No street crossings of named streams are mapped. Rule Evans Hollow Lake is inside town, so a route near it needs water crossing review during planning.

Whose permission does an Annetta bore near FM 5 need?

FM 5 is a Texas state highway, so work in its right of way needs a TxDOT utility permit reviewed by the Fort Worth District. The utility owner files through TxDOT’s online RULIS system; we prepare the bore plan and profile and work under that owner’s permit. For an FM 5 crossing, TxDOT rules call for boring or tunneling beneath existing pavement, and the permitted plan sets the required cover. Annetta is incorporated, so its city streets belong to the town. A Union Pacific track crossing needs an agreement from the railroad, while a South Fork Trinity River crossing is checked for federal water jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities are in the ground in Annetta near the Town of Annetta?

The Town of Annetta public water system uses groundwater wells and reports 38 service connections serving 114 people. That gives a bore near its water lines a specific owner and source to account for. Parker County electric service is reported by Oncor Electric Delivery Company, Weatherford Municipal Utility System, Tri-County Electric Cooperative and Wise Electric Cooperative. The electric line owner at a particular Annetta address must be identified before planning conduit, since the county list does not assign a provider to each property.

Line ownerWhat it isSourceSize
Town of AnnettaPublic water systemGroundwater wells38 connections, 114 people served
Oncor Electric Delivery Company, Weatherford Municipal Utility System, Tri-County Electric Cooperative and Wise Electric CooperativeElectric utilities reporting service in Parker CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Annetta’s median housing year at 2000; 3 percent of homes were built before 1960, 46 percent from 1960 to 1999 and 51 percent in 2000 or later. A bore along Deer Creek Drive may serve a new connection or replace older pipe, depending on the property. Before drilling near a marked line, we hydrovac pothole it because paint shows position, not depth.

Reel of yellow polyethylene gas pipe on a trailer staged for a directional bore
A reel of yellow polyethylene gas pipe on a trailer, staged for a directional bore.

What is near Annetta, including Aledo?

Annetta is an incorporated town in Parker County, with 3.75 square miles of land and an elevation of 899 feet. ZIP code 76008 serves the town. Annetta North is 1.8 miles northeast, while Aledo is 3.6 miles east and Annetta South is 3.6 miles southeast. Weatherford, the county seat and nearest larger city, is 7.0 miles northwest. Our Yukon yard is 236 road miles away, a 4.7 hour drive, which factors into how we plan a job near FM 5.

Places near Annetta

Which jobs call for a bore near the South Fork Trinity River in Annetta?

  • Highway crossing: A bore under FM 5 needs a route and cover plan that fits the Texas highway right of way.
  • Street service: Along Lakeview Drive, a water, sewer or fiber service bore can avoid opening the pavement when pits fit the site.
  • Rail crossing: A route beneath the Union Pacific Baird Subdivision needs an agreement with the track owner before the crossing is planned.
  • Creek crossing: A bore near the South Fork Trinity River needs channel depth planning and water jurisdiction review.
  • Water service: A connection near the Town of Annetta system can be planned around its groundwater wells and existing service lines.
  • Utility replacement: A route near Deer Creek Drive can replace buried lines, with marked utilities exposed before drilling close to them.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore near O’Neal Avenue in Annetta?

For a quote near O’Neal Avenue, give us the address or map pin, what needs to go underground, the pipe or conduit size and the footage. A sketch or plans help us see how the route meets the street. If the route is near FM 5 or the Union Pacific tracks, include that crossing in the scope so we can consider its location.

The price reflects the route, not just its length. Annetta’s 236 road miles from Yukon affect mobilization, while Brackett soil, clay and shallow mapped bedrock affect drilling time and tooling. A route near FM 5 or Union Pacific tracks adds crossing planning. We also account for pipe size, marked utilities to expose, pavement, creek or drainage crossings, pits, excavator time and backfill. High profile or emergency work can change the crew plan.

Questions people ask about boring in Annetta

Does Trinity Boring Solutions take directional boring jobs in Annetta, Parker County?

Yes, we take directional boring work in Annetta, Parker County. Our crews and vetted partner drilling contractors handle the work, with Trinity involved from the first call through the bore log. For a route along Old Annetta Road, we plan around the street, soil and any marked utilities.

Can you bore under the South Fork Trinity River in Annetta?

A bore under the South Fork Trinity River can be considered, with the route and depth planned around its channel. The stream runs 1.01 channel miles inside Annetta. During planning, the crossing is checked for U.S. Army Corps of Engineers jurisdiction, and the site conditions determine how the bore is set up.

Who runs Annetta’s public water system, and where does its water come from?

The Town of Annetta owns the public water system, and its source is groundwater wells. Public records report 38 service connections and 114 people served. A planned bore near those lines needs the route coordinated with the system’s buried infrastructure.

Which electric companies report service in Annetta, Parker County?

Oncor Electric Delivery Company, Weatherford Municipal Utility System, Tri-County Electric Cooperative and Wise Electric Cooperative report electric service in Parker County. That list does not identify the provider at each Annetta address. We confirm the line owner before planning an electric conduit bore along a street such as O’Neal Avenue.

Who controls Lakeview Drive in Annetta, and does a bore mean cutting the street?

Annetta is incorporated, so the town’s city streets, including Lakeview Drive, belong to the town. A directional bore can pass beneath pavement without an open cut through the street when the route and pit locations work. The site still needs a plan for the entry and exit pits.

What does Annetta housing age mean for a replacement bore near Deer Creek Drive?

Annetta’s median housing year is 2000 in the American Community Survey 2019 to 2023 estimates. The mix includes homes from several eras, so a bore near Deer Creek Drive could serve a new connection or replace an existing line. We expose marked utilities before drilling near them because locate marks do not show depth.

What bore sizes and lengths can you handle for a job on Annetta’s O’Neal Avenue?

For a job on O’Neal Avenue, we handle lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. The route, ground and crossings determine which setup fits the job. A sketch helps us understand the proposed alignment.

How early should I call Texas811 for a bore near Old Annetta Road?

For a bore near Old Annetta Road, Texas law requires the locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. If the start moves more than 14 days past the notice, make a new request. Refresh worn or moved marks through Texas811 before work continues.

What affects the cost of a directional bore near FM 5 in Annetta?

The job details set the price for a bore near FM 5. Length, pipe or conduit size, Brackett soil and shallow mapped bedrock all affect the work. We also consider highway or Union Pacific crossings, utilities to expose, pavement, drainage, pits, equipment time and backfill. Mobilization from Yukon matters because Annetta is 236 road miles from our main office.

Where the Annetta facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Annetta

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Annetta, Texas

Type the address of your job in Annetta. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Annetta

Same county: Briar · Springtown · Reno · Azle · Fort Worth · Western Lake · Dennis · Cresson · Horseshoe Bend · Peaster · Millsap · Sanctuary. All counties: Texas county list.