Springtown Texas Directional Boring: Windthorst Soil, Texas State Highway 199, Walnut Creek
Quick Answer: Can you get a line under Texas State Highway 199 or Walnut Creek without cutting it? Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), in Springtown, Texas, for those kinds of crossings. Springtown is 208 road miles from our Yukon, Oklahoma main office, with Main Street among the local routes a bore may have to pass beneath. Windthorst soil is common here, and clay below the surface can cling to the reamer and slow the pull. We plan the bore around the route and the ground.
Springtown bores at a glance
- Incorporated city in Parker County, Texas. Population 4,843 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 208 miles, about 4.3 hours of driving.
- Ground: Windthorst soil is mapped on 33 percent of the area, with sandy clay loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 33 percent of the area.
- Highways inside the boundary: Texas State Highway 199, Texas State Highway 51 and FM 51. State permit office: TxDOT Fort Worth District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Walnut Creek, Browders Creek, Dry Branch and Woody Creek.
- Public water: City of Springtown, surface water.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who handles directional boring under Texas State Highway 199 in Springtown?
Trinity Boring Solutions takes directional boring work in Springtown, Parker County, including routes beneath Texas State Highway 199. Can you get a line under a road or creek without cutting it? We plan bores to cross roads and Walnut Creek without open cutting those surfaces. The Census Bureau Vintage 2024 estimate puts Springtown at 4,843 people, with growth that brings water, sewer, gas, electric conduit and fiber needs along Main Street and other local routes.
Our main office is in Yukon, Oklahoma, and Springtown work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore was roughly 4,100 feet of 48 inch pipe under the Arkansas River in Tulsa, Oklahoma. By comparison, work near Springtown’s 10.5 mapped roadway miles of Texas State Highway 199 is typically a shorter utility crossing planned for the specific road and ground.

What is the ground like beneath Springtown’s Windthorst soil?
Springtown’s USDA soil survey maps Windthorst soil across 33 percent of the area and Selden across 27 percent. Surface texture is mainly fine sandy loam, mapped over 52 percent, while loamy fine sand covers 31 percent. At about 40 inches below the surface, sandy clay loam is mapped across 50 percent and sandy clay across 30 percent; average clay content at that depth is 29 percent. These are mapped patterns, not test borings, so the route can still meet different material. Clay can stick to a reamer and grip pipe, while the sandy surface calls for keeping the hole stable.
| USDA soil survey, inside the Springtown city limits | What is mapped |
|---|---|
| Soil series mapped | Windthorst 33 percent, Selden 27 percent, Duffau 17 percent, Santo 8 percent and Clairette 8 percent |
| Texture at the surface | fine sandy loam 52 percent, loamy fine sand 31 percent and very fine sandy loam 11 percent |
| Texture about 40 inches down | sandy clay loam 50 percent, sandy clay 30 percent and clay loam 9 percent |
| Engineering class about 40 inches down | lean clay (CL) 87 percent, silty clayey sand (SC SM) 8 percent and silty clay (CL ML) 3 percent |
| Average clay content about 40 inches down | 29 percent |
| Bedrock mapped within 60 inches | 33 percent of the area (0 percent hard rock, 33 percent weathered rock) |
| Seasonal water table within 60 inches | 27 percent of the area |
| Flood prone soils | 10 percent of the area |
| High corrosion risk for uncoated steel | 27 percent of the area |
The USDA survey maps bedrock within 60 inches across 33 percent of Springtown, all weathered bedrock; hard bedrock is not mapped at that depth. The geologic map lists Paluxy Sand of Aptian age, described with sand, sandstone, mudstone and limestone, so a bore may slow where weathered rock meets soil. A seasonal water table is mapped within 60 inches across 27 percent, and flood prone soils cover 10 percent, factors to consider around Walnut Creek. For Springtown boring, we consider casing and tracer wire materials because high steel corrosion risk is mapped across 27 percent, with fine sandy loam at the surface.
How do crews bore through Springtown’s sandy clay loam?
Springtown’s sandy clay loam and clay below it call for a stable fluid plan and staged reaming. We track the drill head as the bore advances and adjust to the ground along the route.
- Windthorst soil is common in Springtown, so we use a fluid plan suited to clay that can cling to the reamer and grip pipe.
- Where sandy clay loam gives way to firmer material, staged reaming helps open the path without asking one pass to do all the work.
- With seasonal water table mapped within 60 inches across 27 percent of the area, we plan manageable pits and pump if water collects.
- Before approaching a marked line near the City of Springtown water system or an electric conduit route, we pothole to check its depth.

What might a bore have to cross in Springtown near Walnut Creek?
Springtown has 10.5 mapped roadway miles of Texas State Highway 199, 4.6 miles of Texas State Highway 51 and 2.9 miles of FM 51 inside city limits. Main Street is the longest named street at 3.24 miles, followed by Spring Branch Trail at 1.85 miles and Avenue A at 1.59 miles. Avenue B adds another 1.46 miles. These routes give a project several possible pavement crossings, so the bore path and access points matter before equipment arrives.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Texas State Highway 199 | State highway | 10.5 roadway miles inside | State highway office |
| Texas State Highway 51 | State highway | 4.6 roadway miles inside | State highway office |
| FM 51 | State highway | 2.9 roadway miles inside | State highway office |
| Walnut Creek | Stream | 2.38 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Browders Creek | Stream | 1.33 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Dry Branch | Stream | 0.09 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Woody Creek | Stream | 0.03 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Goshen Creek | Stream | 0.03 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Cottonwood Branch | Stream nearby | 0.7 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Springtown or within one mile outside its limits, and no street and rail crossings are mapped in the city. Walnut Creek runs 2.38 channel miles inside the city, and Browders Creek runs 1.33 miles; the mapped street crossings of named streams total 10. With Walnut Creek inside Springtown, we plan water crossings knowing no lakes or ponds are mapped within one mile. A Walnut Creek crossing needs a route planned below the channel, with jurisdiction checked during planning.
Who approves boring work in Springtown and Parker County?
Texas State Highway 199 crossings set cover depths that can shape the bore profile: electric and communication lines need 60 inches below the lowest crossed grade, while water lines need 60 inches and pressurized sewer lines need 60 inches at crossings. Texas Department of Transportation rules also set different cover for lines running along the right of way, and the TxDOT Fort Worth District reviews the utility permit. The utility owner files through RULIS; we prepare the bore plan and profile for that application. Existing highway pavement is bored or tunneled, and a Walnut Creek route is checked for U.S. Army Corps of Engineers jurisdiction. Main Street is among Springtown’s city streets, so we coordinate ownership and access with the city before boring there.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities serve Springtown near the City of Springtown system?
The City of Springtown public water system uses surface water and reports 1,658 service connections serving 3,781 people. For an electric conduit bore near Main Street, the line owner is confirmed before the route is planned. Utilities reporting electric service in Parker County include Oncor Electric Delivery Company, Weatherford Municipal Utility System, Tri-County Electric Cooperative and Wise Electric Cooperative; that list does not identify the provider at every Springtown address.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Springtown | Public water system | Surface water | 1,658 connections, 3,781 people served |
| Oncor Electric Delivery Company, Weatherford Municipal Utility System, Tri-County Electric Cooperative and Wise Electric Cooperative | Electric utilities reporting service in Parker County | EIA Form 861 | Confirm the line owner by address |
The 2019 to 2023 five year estimates put Springtown’s median housing year at 1986; we plan routes with existing development in mind. Springtown estimates place 11 percent of homes before 1960, 54 percent from 1960 to 1999, and 35 percent in 2000 or later; we plan routes with homes in mind. That mix can mean a route serves either replacement work or newer connections near Avenue B. Before drilling near a marked water or electric line, we hydrovac pothole to expose it; locate paint shows position, not depth.

Do you cover Springtown and nearby Carter?
Springtown is an incorporated city in Parker County, 15.8 miles north of county seat Weatherford. It covers 3.04 square miles at an elevation of 865 feet, and ZIP code 76082 serves the city. Carter is 4.9 miles southwest, Sanctuary is 6.6 miles southeast and Reno is 6.8 miles east. Azle, the nearest larger city, is 9.6 miles southeast. Our Yukon, Oklahoma yard is 208 road miles away, about a 4.3 hour drive, so distance is part of planning equipment mobilization for work near Texas State Highway 199.
Places near Springtown
- Directional boring in Carter: 4.9 miles southwest
- Directional boring in Sanctuary: 6.6 miles southeast
- Directional boring in Reno: 6.8 miles east
- Directional boring in Briar: 7 miles northeast
- Directional boring in Azle: 9.6 miles southeast
What boring work comes up around Springtown’s Main Street?
- Highway crossing: A Texas State Highway 199 bore needs a route beneath the pavement and cover suited to the line being installed.
- Water service: A line near the City of Springtown system may connect along Main Street, with the specific buried line exposed before drilling near it.
- Fiber route: A conduit crossing near Avenue A can carry fiber beneath pavement while leaving the street surface uncut.
- Creek crossing: A Walnut Creek bore needs a profile planned beneath the channel and a jurisdiction check during planning.
- Local street bore: Spring Branch Trail offers a route where a line can pass beneath the street instead of crossing it by open cut.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a bore near Springtown’s Avenue B?
For a route near Avenue B, start with the address or map pin, then tell us what will go underground. Give us the pipe or conduit size and the footage; a sketch or plans help show where the bore starts and ends. For example, a Main Street crossing is easier to plan when we can see which side of the road the line serves.
A short, direct route through Springtown’s sandy clay loam may be simpler to plan than a long crossing through mixed ground. Length, pipe or conduit size, soil and rock, and the number of utilities to expose all affect the scope. Texas State Highway 199 pavement, Walnut Creek, concrete, pits, excavator time and sand backfill can add work. The 208 road miles from Yukon also affect mobilization, as can a high profile or emergency schedule.
Questions people ask about boring in Springtown
Does Trinity take directional boring jobs in Springtown, Parker County?
Yes, we take directional boring work in Springtown and across Texas. Our main office is in Yukon, and we staff Springtown jobs with our own crews or partner drilling contractors we have vetted. You deal with Trinity through the work, whether a bore runs near Main Street or beneath Texas State Highway 199.
What ground should I expect for a Springtown bore near Windthorst soil?
The USDA soil survey maps Windthorst across 33 percent of Springtown, with fine sandy loam common at the surface. At about 40 inches, sandy clay loam covers 50 percent of mapped area. Clay can adhere to the reamer, while the route still needs checking because soil survey patterns are not test borings.
Could a Springtown directional bore run into rock?
It could. The USDA survey maps weathered bedrock within 60 inches across 33 percent of Springtown, while hard bedrock is not mapped at that depth. The geologic map names Paluxy Sand of Aptian age. A weathered rock contact can slow drilling or affect steering, so the planned route matters.
Who handles permits for a Springtown crossing under Texas State Highway 199?
The utility owner applies for a TxDOT utility permit through RULIS, and the TxDOT Fort Worth District reviews it. We prepare the bore plan and profile for the owner’s application. A Texas State Highway 199 crossing also has cover requirements that depend on the line type and the permit.
Can a Springtown line be bored beneath Walnut Creek?
A bore can be planned beneath Walnut Creek, which has 2.38 channel miles inside Springtown. The route must account for the channel, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. A site specific plan determines the entry and exit points.
Who supplies water in Springtown, and what is its source?
The City of Springtown runs the public water system, which uses surface water. It reports 1,658 service connections and 3,781 people served. Before a bore near a water line, we expose the marked utility so its location and depth can be checked.
How much 811 notice do I need for a Springtown bore near Main Street?
Texas law requires a Texas811 locate request at least 48 hours before excavation, not counting Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If a Main Street start slips more than 14 days past the original notice, make a new request. For crossings along Texas State Highway 199, we refresh worn or moved marks through Texas811 before continuing work.
How far is Springtown from Yukon, and does nearby Azle change the job?
Springtown is 208 road miles from our Yukon, Oklahoma main office, about a 4.3 hour drive. Azle is 9.6 miles southeast and is the nearest larger city, but the project route and equipment needs determine mobilization. A bore near Main Street still needs its own site and ground review.
What affects the cost of boring under Texas State Highway 199 in Springtown?
The route, bore length and pipe or conduit size matter, as do soil and rock, utility exposures and surface conditions. A Texas State Highway 199 crossing may involve pavement and permit planning; Walnut Creek or Springtown’s clay can add site demands. Distance from Yukon, pit work, backfill and schedule also affect the job.
Where the Springtown facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Springtown
- U.S. Census Bureau, TIGER/Line 2024: Springtown boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Springtown
- U.S. Census Bureau, American Community Survey 2019 to 2023: Springtown housing units and year built
- Macrostrat geologic map compilation: map units under Springtown
- U.S. EPA Safe Drinking Water Information System: public water systems serving Springtown
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Parker County
- U.S. Geological Survey, Elevation Point Query Service: Springtown elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Springtown
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Springtown
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Springtown, Texas
Type the address of your job in Springtown. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Springtown
Same county: Weatherford · Willow Park · Aledo · Annetta · Hudson Oaks · Fort Worth · Western Lake · Dennis · Cresson · Horseshoe Bend · Annetta South · Peaster. All counties: Texas county list.
