trinityboringsolutions.com

Dennis Texas Directional Boring: Truce Soil, FM 1189 And Rocky Run

Quick Answer: We take directional boring, also called horizontal directional drilling (HDD), jobs in Dennis, Texas, including routes beneath FM 1189 and Rocky Run. From our Yukon, Oklahoma main office, Dennis is 254 road miles away, and Sugartree Drive is one local route to plan around. Truce soil is common here, and clay farther down can cling to the reamer. Staged reaming and controlled fluid help manage that ground.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Dennis bores at a glance

  • Incorporated city in Parker County, Texas. Population 843 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 254 miles, about 5.2 hours of driving.
  • Ground: Truce soil is mapped on 49 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 65 percent of the area.
  • Highways inside the boundary: FM 1189. State permit office: TxDOT Fort Worth District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Rocky Run and Patrick Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring near Sugartree Drive in Dennis?

Trinity Boring Solutions takes directional boring work in Dennis, Parker County, where the Census Bureau Vintage 2024 estimate puts the population at 843. We install water, sewer, gas, electric conduit and fiber, with routes planned along streets such as Sugartree Drive or Old Dennis Road and beneath FM 1189 where the route calls for it.

Our main office is in Yukon, Oklahoma, and Dennis work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. With no utility strike in over 25 years, our family business, started in 1965 and doing directional boring since 1982, brings that record to planned work near Sugartree Drive, where the electric line owner must be identified among Parker County providers such as Oncor Electric Delivery Company.

Trinity Boring Solutions branded compact directional drilling unit positioned beside a tree on a red dirt jobsite
Our compact directional drill set up beside a tree on a tight site. Photos on this page are from our jobs in Oklahoma and Texas.

What ground should a bore expect in Dennis near Truce soil?

The USDA soil survey maps Truce across 49 percent of Dennis, with Truce fine sandy loam on 36 percent of the mapped area. At about 40 inches below the surface, clay is the leading texture, mapped across 51 percent; the average clay content at that depth is 36 percent. Sandy ground accounts for 4 percent at that depth. These are mapped soil patterns, not test borings, but they point to sticky material that can ball on a reamer and grip pipe. A bore plan should allow staged reaming and a ready pullback.

USDA soil survey, inside the Dennis city limitsWhat is mapped
Soil series mappedTruce 49 percent, Bastrop 9 percent, Chaney 7 percent, Santo 6 percent and Coarsewood 5 percent
Texture at the surfacefine sandy loam 68 percent, loamy sand 7 percent and loamy fine sand 7 percent
Texture about 40 inches downclay 51 percent, sandy clay loam 12 percent and sandy clay 8 percent
Engineering class about 40 inches downlean clay (CL) 73 percent, silty clayey sand (SC SM) 6 percent and fat clay (CH) 6 percent
Average clay content about 40 inches down36 percent
Bedrock mapped within 60 inches65 percent of the area (0 percent hard rock, 64 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils20 percent of the area
High corrosion risk for uncoated steel62 percent of the area

Weathered bedrock is mapped within 60 inches across 64 percent of Dennis, with typical bedrock depth at 44 inches; the Lazy Bend Formation is Pennsylvanian shale, limestone and sandstone. A hard soil bit may suit weathered rock, though the soil to rock contact can steer the head off line. No seasonal water table is mapped within 60 inches, while flood prone soils cover 20 percent. High steel corrosion risk covers 62 percent, so the line owner should weigh casing and tracer wire materials; HDPE does not share that steel concern.

How do we drill Dennis clay along Sugartree Drive?

We drill Dennis routes through Truce ground by matching fluid, reaming and pullback to the mapped clay and weathered rock conditions. The USDA map guides planning, but it is not a site test.

  1. With Truce clay mapped widely, we use thinner fluid and polymer as needed, then ream in stages so sticky cuttings do not build up on the tool.
  2. Where clay is heavy, we watch returns and keep fluid pressure controlled near pavement on Sugartree Drive to reduce the chance of lifting the surface.
  3. The Lazy Bend Formation includes shale, limestone and sandstone, so we track depth and pitch closely where a bore moves from soil into weathered rock.
  4. At a Rocky Run crossing, we plan beneath the channel and keep pits on the banks in dirt, limiting disturbance to the creek edge.
Vermeer D24x40 S3 Navigator and water truck at the entry of a 385 foot sandstone rock bore above the wetland in Guthrie, Oklahoma
Our Vermeer D24x40 and water truck at the entry of a 385 foot sandstone rock bore in Guthrie, Oklahoma.

Which roads and creeks could a Dennis bore cross near Rocky Run?

FM 1189 runs for 2.3 mapped roadway miles inside Dennis, so a route in its right of way needs state review. Sugartree Drive is the longest named street at 3.21 miles, followed by Sugartree Circle at 1.53 miles and Old Dennis Road at 0.68 miles. The public road network totals 11.1 centerline miles. A bore can pass beneath pavement rather than cut across it, with the route and entry pits set to suit the specific street or highway.

CrossingTypeMapped extentWho has a say
FM 1189State highway2.3 roadway miles insideState highway office
Rocky RunStream1.74 channel miles insideChecked for Corps of Engineers jurisdiction
Patrick CreekStream0.41 channel miles insideChecked for Corps of Engineers jurisdiction
Little Onion BranchStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Salt BranchStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Wash BranchStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Cougar BranchStream nearby0.8 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

The mapped records show no railroad inside Dennis or within one mile outside its limits, so a track crossing is not part of the mapped local route. Rocky Run runs 1.74 channel miles through town, and Patrick Creek adds 0.41 miles; three street crossings of named streams are mapped. No lake or pond is mapped within one mile. A proposed creek route still needs its channel and bank conditions considered during bore planning.

Whose permission does a Dennis bore under FM 1189 need?

FM 1189 is a Texas state highway, so the utility owner applies for its right of way permit through TxDOT’s online RULIS system, with review by the TxDOT Fort Worth District. We prepare the bore plan and profile and work under the utility owner’s permit. TxDOT rules call for boring or tunneling below existing highway pavement, with the bore extending beneath all travel lanes on rural highways. We plan Dennis work as an incorporated town, treating Sugartree Drive and Old Dennis Road as town streets in our bore coordination. A Rocky Run crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are in the ground in Dennis and Parker County?

The provider for a specific Dennis address must be confirmed with the city, county or local water district before planning a bore; EPA drinking water records do not tie a water system to this town. Parker County electric service is reported by Oncor Electric Delivery Company, Weatherford Municipal Utility System, Tri-County Electric Cooperative and Wise Electric Cooperative. Those reports do not identify the provider at every address, so the line owner must be verified before an electric conduit bore near Sugartree Drive.

Line ownerWhat it isSourceSize
Oncor Electric Delivery Company, Weatherford Municipal Utility System, Tri-County Electric Cooperative and Wise Electric CooperativeElectric utilities reporting service in Parker CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Dennis’s median housing year at 2014, with all housing units built in 2000 or later. That suggests planning for new services as well as replacement lines, but housing age does not establish the age of buried pipe. Along FM 1189, we pothole each marked utility on the bore path before drilling near it. For example, a line under Sugartree Drive must be exposed because locate paint shows position, not depth.

Hydrovac truck and boring equipment staged beside an airport taxiway for utility daylighting in Oklahoma City
Our hydrovac truck and boring equipment beside an airport taxiway in Oklahoma City, set up to expose a utility crossing.

How far does our Dennis service reach toward Horseshoe Bend?

Dennis is in Parker County, covers 1.4 square miles and sits at an elevation of 762 feet. In Dennis, ZIP codes 76462 and 76439 help us identify the location when planning underground boring work. Horseshoe Bend is 3.6 miles southeast, Western Lake is 7.1 miles east, and Lipan is 8.9 miles southwest. Weatherford, the county seat and nearest larger city, is 13.9 miles northeast. From our Yukon yard, Dennis is 254 road miles away and a 5.2 hour drive, so distance is part of planning mobilization for work along FM 1189 or Sugartree Drive.

Places near Dennis

What bores could come up near Sugartree Circle in Dennis?

  • Highway crossing: A route beneath FM 1189 can carry a water line or conduit without cutting the existing pavement.
  • Street service: A bore following Sugartree Circle can connect a new service while keeping the street surface intact.
  • Creek crossing: A Rocky Run route can place water, sewer or conduit beneath the channel, with pits set back from the banks.
  • Utility replacement: A bore along Old Dennis Road can replace a buried line while marked utilities on the path are exposed first.
  • Fiber route: Fiber conduit can follow Sugartree Drive, with its size and footage set by the proposed route.
  • Electric conduit: A route near Spur 1189 starts with confirming the electric line owner and the conduit specifications.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Dennis bore near Spur 1189?

A map pin matters near Spur 1189 because the exact position shows whether the proposed route approaches FM 1189, a street or a creek. For a bore near Sugartree Circle, we ask you to send the address or pin, installation type, pipe or conduit size, and footage. A sketch or plans help us see the route and locate the entry and exit pits.

Price follows the work at the specific site. Truce clay and weathered rock affect ground conditions, while a route across FM 1189, a Rocky Run channel or pavement changes the crossing work. Pipe size, bore length, exposed utilities, pit and excavator time, and sand backfill also shape the scope. The 254 road miles from Yukon affect mobilization, and high profile or emergency work can add planning needs.

Questions people ask about boring in Dennis

Does Trinity take directional boring work in Parker County near Dennis, and who staffs it?

Yes, we take directional boring work in Dennis and across Parker County. Our Yukon office coordinates the job from the first call through the bore log, using our own crews or crews from satellite yards operated by drilling partners we have vetted. Sugartree Drive is one example of a local route we can plan around.

Can you bore a utility line beneath Rocky Run in Dennis?

A bore can be planned beneath Rocky Run if the route and ground conditions support it. The creek has 1.74 channel miles within Dennis, and a proposed water crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. The entry and exit pits also need to fit the creek banks.

Who owns the electric lines in Parker County near Dennis, and who confirms conduit specs?

The electric line owner depends on the Dennis address. Oncor Electric Delivery Company, Weatherford Municipal Utility System, Tri-County Electric Cooperative and Wise Electric Cooperative report service in Parker County. We confirm the owner for the specific route before a conduit bore, then work from the owner’s requirements for the line near streets such as Old Dennis Road.

Does the city or county control Old Dennis Road in Dennis, and must it be cut?

We plan Dennis work as an incorporated town, treating Sugartree Drive and Old Dennis Road as town streets in our bore coordination. A bore under Old Dennis Road can avoid cutting the street, with the pits placed in dirt beside the route. The exact alignment and any nearby marked utilities must be checked before the drill approaches.

Does the housing age near Sugartree Circle in Dennis mean buried lines need replacing?

Not by itself. The American Community Survey 2019 to 2023 estimates put the median housing year at 2014 and show all housing units built in 2000 or later, but that does not date buried pipe. A bore near Sugartree Circle could serve a new connection or replace an older line after the route is checked.

Are bore pits affected by groundwater or flood prone ground near Rocky Run in Dennis?

Flood prone soils are mapped across 20 percent of Dennis, including areas where a Rocky Run route needs careful pit and depth planning. No seasonal water table is mapped within 60 inches, but that map does not replace site checks. Creek crossing plans should keep the bore beneath the channel and account for the bank conditions.

Can I reach Trinity after hours about an urgent bore near Old Dennis Road?

Yes, a person answers Trinity’s phone 24 hours a day at (405) 409-7423. Call about the Old Dennis Road location and describe the line and urgency so we can discuss the work. The call response does not establish that a crew is already in Dennis.

How early should I call Texas811 for a bore along Sugartree Drive in Dennis?

The locate request for a Sugartree Drive bore must be made at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. For work in Parker County, if the start moves more than 14 days past the original notice, we submit a new request. For planned work near Patrick Creek, we request refreshed marks through Texas811 when marks are worn or moved, before continuing.

What affects the cost of a directional bore near FM 1189 in Dennis?

The route and work scope determine the price. Truce clay or weathered rock, pipe size and length, marked utilities to expose, pavement near FM 1189, and a Rocky Run crossing can all change the work. Pit setup, excavator time and mobilization from Yukon also matter, especially for a route far from our main office.

Where the Dennis facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Dennis

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Dennis, Texas

Type the address of your job in Dennis. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Dennis

Same county: Willow Park · Aledo · Briar · Springtown · Reno · Annetta · Azle · Hudson Oaks · Fort Worth · Cresson · Annetta South · Peaster. All counties: Texas county list.