trinityboringsolutions.com

Pilot Point Texas Directional Boring: Justin Soil, US 377 and Little Elm Creek

Quick Answer: Washington Street is Pilot Point’s longest named street at 3.03 miles, and US 377 and the Union Pacific track add crossing constraints. Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for routes near US 377 in Pilot Point, Texas. The Yukon, Oklahoma main office is 181 road miles away, while Union Pacific track runs 2.63 miles inside city limits. Justin soil and clay at about 40 inches can cling to a reamer, so staged reaming and controlled fluid matter.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Pilot Point bores at a glance

  • Incorporated city in Denton County, Texas. Population 6,771 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 181 miles, about 3.6 hours of driving.
  • Ground: Justin soil is mapped on 28 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 18 percent of the area.
  • Highways inside the boundary: US 377, US 377 Business, FM 455, FM 1385 and FM 428. State permit office: TxDOT Dallas District.
  • Railroad track inside the boundary: Union Pacific, with 9 mapped street and rail crossings.
  • Named streams inside the boundary: Little Elm Creek, Mustang Creek and Pecan Creek.
  • Public water: City of Pilot Point, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring on Washington Street in Pilot Point?

For Pilot Point, we take directional boring work across Texas as projects are planned. The city is in Denton County, and the Census Bureau Vintage 2024 estimate puts its population at 6,771. Along Washington Street or near US 377, we can bore routes for water, sewer, gas, electric conduit and fiber, with the line type and path setting the plan.

Our main office is in Yukon, Oklahoma, and Pilot Point work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have had no utility strike in over 25 years, a record that matters where the City of Pilot Point water system and electric providers already serve the area. Our family business began in 1965, and our directional boring work dates to 1982 as we plan for Pilot Point projects.

Ditch Witch JT922 compact directional drill beside the Trinity Boring Solutions truck at NE 24th Street in Oklahoma City
Our Ditch Witch JT922 compact directional drill beside the Trinity truck on a sleeve bore at NE 24th Street in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What is Justin soil like to bore in Pilot Point?

The USDA soil survey maps Justin soil across 28 percent of Pilot Point. At about 40 inches below the surface, clay accounts for 50 percent of mapped texture and clay loam another 28 percent; the average clay content at that depth is 45 percent. The survey also maps heavy clay under 91 percent of the area at that depth. For Pilot Point planning, we treat mapped patterns as reference information, not test borings, when preparing underground work. Sticky clay can gather on a reamer and grip pipe, so we plan staged reaming and keep the pullback close to the final opening.

USDA soil survey, inside the Pilot Point city limitsWhat is mapped
Soil series mappedJustin 28 percent, Navo 14 percent, Burleson 10 percent, Ovan 10 percent and Vertel 9 percent
Texture at the surfacefine sandy loam 41 percent, clay 40 percent and clay loam 16 percent
Texture about 40 inches downclay 50 percent, clay loam 28 percent and bedrock 10 percent
Engineering class about 40 inches downfat clay (CH) 57 percent and lean clay (CL) 40 percent
Average clay content about 40 inches down45 percent
Bedrock mapped within 60 inches18 percent of the area (0 percent hard rock, 18 percent weathered rock)
Seasonal water table within 60 inches1 percent of the area
Flood prone soils12 percent of the area
High corrosion risk for uncoated steel65 percent of the area
Mapped as urban land (disturbed fill)1 percent of the area

The USDA soil survey maps bedrock within 60 inches in 18 percent of Pilot Point, with weathered bedrock represented and no hard bedrock mapped at that depth. A seasonal water table within 60 inches is mapped in 1 percent, while flood prone soils cover 12 percent. High steel corrosion risk is mapped in 65 percent, so the line owner should consider casing and tracer wire materials; HDPE avoids that steel concern. The Woodbine Formation, a Cenomanian sandstone and mudstone unit, also calls for checking ground conditions as the bore advances.

How do we drill through clay in Pilot Point?

Justin soil and the survey’s high clay share call for steady fluid control, staged reaming and a ready pipe string. On routes near Little Elm Creek, we also plan for mapped flood prone ground.

  1. With Pilot Point’s mapped heavy clay, we use thinner drilling fluid and polymer, ream in stages, and keep the pipe ready for prompt pullback.
  2. Because heavy clay covers much of the mapped ground at about 40 inches, we watch fluid returns so pressure does not lift pavement near US 377.
  3. We track the drill head from the surface and log depth and pitch, paying attention to changing ground in the Woodbine Formation.
  4. Every marked utility on a Pilot Point bore path is hydrovac exposed before the drill approaches it; near Washington Street, paint alone does not show depth.
Walkover locator at the edge of the wetland on a directional bore at the Cimarron site in Logan County, Oklahoma
Walkover locator at the edge of a wetland on a directional bore in Logan County, Oklahoma.

What might a new line cross in Pilot Point near US 377?

US 377, US 377 Business, FM 455, FM 1385 and FM 428 all run inside Pilot Point. A bore under an existing highway avoids cutting its pavement, and TxDOT can set the permitted alignment and depth. Washington Street is the longest named street at 3.03 miles, followed by Walcott Street at 1.84 miles and Jefferson Street at 1.4 miles. Liberty Street adds another mapped route at 1.14 miles. These streets give a project address a useful starting point for checking crossings and access.

CrossingTypeMapped extentWho has a say
US 377US highway5.7 roadway miles insideState highway office
US 377 BusinessUS highway3 roadway miles insideState highway office
FM 455State highway10.5 roadway miles insideState highway office
FM 1385State highway2.2 roadway miles insideState highway office
FM 428State highway1.1 roadway miles insideState highway office
Union PacificRailroad2.63 track miles insideThe railroad
Little Elm CreekStream4.48 channel miles insideChecked for Corps of Engineers jurisdiction
Mustang CreekStream1.43 channel miles insideChecked for Corps of Engineers jurisdiction
Pecan CreekStream0.02 channel miles insideChecked for Corps of Engineers jurisdiction
Long BranchStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Bray BranchStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Sand BranchStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Pierce Spring CreekStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Ray Roberts LakeLake or pond14,178 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific owns 2.63 track miles inside Pilot Point on the Choctaw Subdivision, and public mapping shows 9 street and rail crossings in the city. A railroad crossing needs an agreement with Union Pacific that sets crossing conditions. Little Elm Creek runs 4.48 channel miles inside the limits, with Mustang Creek and Pecan Creek also mapped; 2 street crossings of named streams are mapped. Ray Roberts Lake lies within one mile, outside city limits.

Do I need a permit for a Pilot Point bore near Union Pacific?

For work on US 377, US 377 Business or a farm to market road such as FM 455, the line owner files the TxDOT utility application in RULIS, not the drilling contractor. We give the owner the bore plan and profile, then work under the permit issued to that owner; the TxDOT Dallas District reviews it. TxDOT rules set cover by line type, including 60 inches at highway crossings for electric and communication lines and 60 inches for water lines. Pilot Point city streets belong to the city. A Union Pacific track crossing needs an agreement from the railroad, and Little Elm Creek is checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the lines in Pilot Point and Denton County?

The City of Pilot Point public water system uses groundwater wells and reports 2,612 service connections serving 7,836 people. For electric service reported in Denton County, providers include Oncor Electric Delivery Company, Texas-New Mexico Power, City of Denton, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Tri-County Electric Cooperative and Wise Electric Cooperative. Those reports do not identify the provider at every address, so we confirm the line owner before planning an electric conduit bore near Washington Street or another route.

Line ownerWhat it isSourceSize
City of Pilot PointPublic water systemGroundwater wells2,612 connections, 7,836 people served
Oncor Electric Delivery Company, Texas-New Mexico Power, City of Denton, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Tri-County Electric Cooperative and Wise Electric CooperativeElectric utilities reporting service in Denton CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Pilot Point’s median housing year at 1989: 20 percent of homes were built before 1960, 37 percent from 1960 to 1999 and 43 percent in 2000 or later. That mix can mean both replacement routes and new service work near Liberty Street. Before drilling near marked utilities in Pilot Point, we expose them so underground work can proceed with those lines identified. For a proposed bore along Washington Street, each marked line in the path is pothole exposed because paint shows location, not depth.

Exposed underground utility line in a hand dug potholing pit before a directional bore in Oklahoma
An existing utility line exposed in a pothole before a directional bore in Oklahoma.

How far is Pilot Point from Aubrey and our Yukon office?

Pilot Point is an incorporated city in Denton County, at an elevation of 703 feet and covering 7.89 square miles. Its ZIP code is 76258. Tioga is 5.6 miles northeast, Aubrey is 6.3 miles south and Gunter is 7.9 miles east; Celina, the nearest larger city listed, is 10.4 miles southeast. Denton, the county seat, is 16.5 miles southwest. The Yukon yard is 181 road miles away, a 3.6 hour drive, which is part of planning equipment mobilization for a Pilot Point job.

Places near Pilot Point

What boring work comes up near Little Elm Creek in Pilot Point?

  • Highway crossing: A bore beneath US 377 or FM 455 keeps the existing pavement uncut and follows the TxDOT permit for that route.
  • Water service: A connection near the City of Pilot Point groundwater system needs a route and size matched to the address.
  • Fiber route: Conduit along Washington Street can pass beneath pavement rather than requiring an open cut across the street.
  • Creek crossing: A Little Elm Creek route needs depth planning under the channel and a check for Corps jurisdiction.
  • Rail crossing: A route beneath the Union Pacific Choctaw Subdivision needs an agreement with the railroad that owns the track.
  • Street service: A Liberty Street bore can use the planned footage and nearby marked utilities to shape the path and work area.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Pilot Point bore near Washington Street?

For a route near Washington Street, send the address or map pin, what is going underground, its pipe or conduit size and the footage. A sketch or plans help show whether the path approaches US 377, a Union Pacific crossing or Little Elm Creek. That gives us the route details needed to review the work.

Price follows the ground, crossings and logistics at the Pilot Point site. Justin soil’s heavy clay can affect fluid and reaming time; a route under US 377 or Union Pacific track brings crossing requirements into the plan. We also consider line size, footage, marked utilities to expose, pavement or concrete, creek crossings, pits and excavator time. The 181 road miles from Yukon can affect mobilization, and high profile or emergency work changes the job scope.

Questions people ask about boring in Pilot Point

Does Trinity take directional boring jobs in Pilot Point and Denton County, and who staffs them?

Yes. We take Pilot Point work with our own crews and through satellite yards operated by partner drilling contractors we have vetted. When planning a bore in Pilot Point, we stay your contact from the first call through the bore log, whatever crew is on site. That arrangement applies to routes near US 377 as well as other Denton County locations.

Can groundwater or flood prone ground near Little Elm Creek cause problems for Pilot Point bore pits?

It can affect pit planning, but the survey maps a seasonal water table within 60 inches in only 1 percent of the city. Flood prone soils are mapped in 12 percent of Pilot Point, so a Little Elm Creek crossing needs attention to channel depth and pit placement. We plan pits and pumping for the conditions shown at the route.

Does Justin soil in Pilot Point corrode steel, and what pipe should I use?

The USDA soil survey maps high steel corrosion risk across 65 percent of Pilot Point. The line owner should consider casing and tracer wire materials for a route through Justin soil; HDPE is not affected by soil corrosion. The right choice depends on the line design and the owner’s material requirements.

What ground does a bore pass through in Pilot Point, including Justin soil?

Justin is the most common mapped soil series, covering 28 percent of Pilot Point. At about 40 inches, the USDA soil survey maps clay under 50 percent of the area and clay loam under 28 percent. Those mapped patterns are not test borings, but they signal that sticky clay can build up on the reamer.

Is rock likely to affect a directional bore in Pilot Point?

The USDA soil survey maps bedrock within 60 inches in 18 percent of Pilot Point, including weathered bedrock; hard bedrock is not mapped at that depth. The Woodbine Formation is mapped as sandstone and mudstone. Conditions along a particular Washington Street or US 377 route still need to be checked as the bore proceeds.

Who approves a bore under US 377 in Pilot Point, and which TxDOT office reviews it?

The line owner applies for a TxDOT utility permit through RULIS for work in the US 377 right of way. We provide the bore plan and profile and work under the owner’s issued permit. The TxDOT Dallas District reviews the application for Denton County, and the permit can set the required depth.

What bore sizes and lengths can Trinity handle near Liberty Street in Pilot Point?

For underground work around Pilot Point, we handle lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. A Liberty Street project’s route, utility crossings and Justin soil all help determine a suitable setup. Send the planned size and footage along with an address or map pin.

How much notice does Texas811 need for a Pilot Point bore near Washington Street?

Count back at least 48 hours from the planned excavation start, excluding Saturdays, Sundays and legal holidays; the request cannot be made earlier than 14 days before work. If a Washington Street start slips more than 14 days past the original notice, submit a new request. Around Pilot Point, we refresh marks that wear off or move through Texas811 before work continues.

What affects the price of directional boring near US 377 in Pilot Point?

The project’s length, pipe or conduit size, Justin soil, utilities to expose, pavement, creek crossings, pits and excavator time all affect the scope. A US 377 highway crossing or Union Pacific track crossing adds route and permit considerations. Mobilization also reflects the 181 road miles from the Yukon yard; high profile or emergency work can require a different plan.

Where the Pilot Point facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Pilot Point

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Pilot Point, Texas

Type the address of your job in Pilot Point. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Pilot Point

Same county: Denton · Lewisville · Frisco · Carrollton · Flower Mound · Little Elm · The Colony · Dallas · Corinth · Fort Worth · Highland Village · Trophy Club. All counties: Texas county list.