trinityboringsolutions.com

Elm Creek Texas Directional Boring: Copita Sandy Clay Loam, US 277 and Elm Creek

Quick Answer: Copita sandy clay loam is mapped near Elm Creek, where Trinity Boring Solutions uses directional boring, also called horizontal directional drilling (HDD), for crossings such as US 277. The Yukon, Oklahoma main office is 589 road miles away, and FM 1588 helps define local access. Copita soil can be sticky in the reamer. Clay mapped about 40 inches down can grip pipe, so we plan fluid and reaming around the ground. Creek banks can remain uncut.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Elm Creek bores at a glance

  • Unincorporated community in Maverick County, Texas. Population 2,884 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 589 miles, about 11.8 hours of driving.
  • Ground: Copita soil is mapped on 31 percent of the area, with cemented bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 36 percent of the area.
  • Highways inside the boundary: US 277 and FM 1588. State permit office: TxDOT Laredo District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Elm Creek and Maverick County Canal.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring in Elm Creek near Union Pacific?

Trinity Boring Solutions takes directional boring work in Elm Creek, where Copita sandy clay loam can stick to a reamer. The Census Bureau counted 2,884 people in this Maverick County community in 2020. We install water, sewer, gas, electric conduit and fiber lines, including service runs along Blanca Lane or connections crossing US 277.

Our main office is in Yukon, Oklahoma, and Elm Creek work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business that started in 1965, with directional boring work dating to 1982. Our 3/4 inch service line to 48 inch casing range suits routes from Blanca Lane to a larger US 277 crossing.

Aerial view of Trinity Boring Solutions crew and service van at a multifamily apartment underground utility jobsite in Oklahoma City
Our crew and service van at a multifamily underground utility job in Oklahoma City, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What is Elm Creek ground like to bore in Copita soil?

Copita soil is the largest mapped series in Elm Creek, and its sandy clay loam can hold a bore hole while sticking to the reamer. The USDA soil survey maps Copita across 31% of the community, Jimenez across 25% and Elindio across 24%. At about 40 inches down, cemented bedrock is mapped across 31%, and the average clay content is 43%. Heavy clay is mapped across 39% at that depth; no sandy area is mapped there. We treat mapped patterns near US 277 in Elm Creek as planning context, not as test borings.

USDA soil survey, inside the Elm Creek mapped community boundaryWhat is mapped
Soil series mappedCopita 31 percent, Jimenez 25 percent, Elindio 24 percent, Catarina 10 percent and Montell 3 percent
Texture at the surfacesandy clay loam 31 percent, very gravelly loam 25 percent and silty clay loam 24 percent
Texture about 40 inches downcemented bedrock 31 percent, variable 25 percent and clay loam 24 percent
Engineering class about 40 inches downlean clay (CL) 24 percent and fat clay (CH) 15 percent
Average clay content about 40 inches down43 percent
Bedrock mapped within 60 inches36 percent of the area (0 percent hard rock, 36 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel70 percent of the area

The USDA soil survey maps bedrock within 60 inches across 36% of Elm Creek, with a typical depth of 33 inches, so a route may meet weathered rock near the surface. In Elm Creek, we plan without mapped seasonal water table or flood prone soils information. High steel corrosion risk covers 70%, so the line owner should weigh casing and tracer wire materials; HDPE is unaffected by that soil concern. The geologic map lists Alluvium, undivided, of Cenozoic age and the Late Cretaceous Olmos Formation. Ground conditions still need checking along the actual bore path.

How do we drill Elm Creek ground with cemented bedrock?

For an Elm Creek route, we match the drilling setup to the mapped clay and shallow weathered bedrock. Copita soil can hold an open hole, but clay may build on the reamer and grip the pipe.

  1. In Copita sandy clay loam, we adjust drilling fluid and ream in stages so sticky clay does not build up on the reamer or grip the pipe.
  2. With heavy clay mapped at about 40 inches in Elm Creek, we watch fluid returns and keep pressure controlled near pavement on US 277.
  3. Where cemented bedrock is mapped shallow, we check the changing ground and use a slower drilling approach if weathered rock is encountered.
  4. At marked crossings near Thompson Road, a walkover locator tracks the drill head while we log depth and pitch; hydrovac exposes marked utilities first.
Vermeer D24x40 S3 Navigator and water truck at the entry of a 385 foot sandstone rock bore above the wetland in Guthrie, Oklahoma
Our Vermeer D24x40 and water truck at the entry of a 385 foot sandstone rock bore in Guthrie, Oklahoma.

Which roads, tracks or creeks does Elm Creek boring cross near Thompson Road?

US 277 and FM 1588 run inside the Elm Creek mapped community boundary, so a route crossing either highway needs a plan that protects its pavement. Thompson Road is the longest named street at 2.1 miles in the community. Deer Run Boulevard measures 1.84 miles and Blanca Lane 1.76 miles. Del Rio Boulevard is another long route at 1.66 miles. These named roads help locate an alignment, but the exact address and utility marks determine where pits and the bore can fit.

CrossingTypeMapped extentWho has a say
US 277US highway1.7 roadway miles insideState highway office
FM 1588State highway2.1 roadway miles insideState highway office
Union PacificRailroad nearby0 miles outsideThe railroad
Elm CreekStream2.34 channel miles insideChecked for Corps of Engineers jurisdiction
Maverick County CanalStream2.09 channel miles insideChecked for Corps of Engineers jurisdiction
Hediondo CreekStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad lies inside the Elm Creek mapped community boundary, and no street and rail crossing is mapped there. Union Pacific track runs along or touches the boundary, so a route reaching it needs the railroad owner’s crossing agreement. Elm Creek has 2.34 channel miles inside the community, and Maverick County Canal has 2.09. Three mapped street crossings of named streams make creek and drainage alignment checks relevant; no lake or pond is mapped within one mile.

Whose permission does an Elm Creek bore need in Maverick County?

Elm Creek is an unincorporated community with no city government, so street approval belongs to Maverick County or the state, depending on the road. For work in the US 277 or FM 1588 right of way, TxDOT’s Laredo District reviews the utility owner’s application in RULIS. The line owner, not Trinity, files it; we prepare the bore plan and profile for that filing. TxDOT cover rules include 60 inches for electric and communication lines at highway crossings, and the district can set another depth in the permit. Existing highway pavement is bored or tunneled beneath.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground in Maverick County near Elm Creek?

The water provider for a specific Elm Creek address has to be confirmed with Maverick County or the local water district before a bore is planned. Public records do not identify a system matched to this community. AEP Texas Central and Rio Grande Electric Cooperative report service in the county, but the line owner for a particular address must be confirmed before conduit is planned. That owner check guides hydrovac potholing near a proposed water or electric route.

Line ownerWhat it isSourceSize
AEP Texas Central and Rio Grande Electric CooperativeElectric utilities reporting service in Maverick CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Elm Creek’s median housing year at 2003; 60% of homes were built in 2000 or later, and 40% from 1960 to 1999. None are mapped as built before 1960. A replacement bore near Deer Run Boulevard may need to meet existing buried services, while newer development can call for service extensions. We hydrovac expose each marked utility on the route before drilling near it, since locate paint does not show depth.

Trinity Boring Solutions technician hydrovac daylighting along a commercial curbline during utility locating in Oklahoma City
Hydrovac daylighting along a commercial curb line in Oklahoma City to find the utilities before a bore.

How far is Elm Creek from Seco Mines and the Yukon yard?

Elm Creek is in Maverick County, at an elevation of 750 feet, and covers 2.83 square miles as a census designated place. ZIP code 78852 serves the community. Siesta Acres is 1.5 miles south, Seco Mines is 1.9 miles south, and Fabrica is 2.4 miles south. Eagle Pass, the county seat and nearest larger city, is 4.5 miles south. The Yukon, Oklahoma yard is 589 road miles away, an 11.8 hour drive, so distance can affect equipment mobilization for a bore near US 277.

Places near Elm Creek

What boring work comes up near the Elm Creek channel?

  • Highway crossing: A bore under US 277 or FM 1588 can keep existing pavement intact, with entry and exit pits set off the traveled surface.
  • Water service: A line serving an address near Blanca Lane needs the local water provider confirmed before its route and connection are planned.
  • Fiber conduit: A conduit route along Thompson Road can be bored below the road surface, with marked utilities exposed before drilling approaches them.
  • Creek crossing: A route beneath Elm Creek needs channel conditions considered, and the crossing is checked for Corps jurisdiction during planning.
  • Rail crossing: Union Pacific track meets or touches the community boundary, so a proposed track crossing calls for the railroad owner’s agreement.
  • Replacement bore: Work near Deer Run Boulevard can replace a buried line without opening the full street, after existing utilities are located and exposed.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for Elm Creek work near US 277?

A map pin near US 277 or Elm Creek shows which road, channel and access points shape the route. For Elm Creek, send us the address or pin, underground scope, pipe or conduit size, and footage so we can plan the bore. A sketch or plans help us see the proposed path, entry and exit pits, and nearby crossings before we set the work scope.

The price follows the specific bore, not a single measure. Copita clay and the mapped cemented bedrock can affect drilling time; a US 277 crossing adds roadway planning, while Elm Creek may add a channel crossing review. We also consider bore length, pipe size, exposed utilities, pavement, pits, excavator time and sand backfill. The 589 road miles from Yukon affect mobilization, and high profile or emergency work can change the scope.

Questions people ask about boring in Elm Creek

Does Trinity take directional boring jobs in Elm Creek, Maverick County, and who staffs them?

Yes, Trinity Boring Solutions takes directional boring work in Elm Creek, Maverick County. Our own crews and partner contractor crews from vetted satellite yards handle the drilling. You work with Trinity from the first call through the bore log, whether the route is near US 277 or along a local street.

Can a utility line be bored beneath Elm Creek in Elm Creek?

A line can be planned beneath the Elm Creek channel if the route and ground support it. We assess the channel crossing and check for U.S. Army Corps of Engineers jurisdiction during planning. The mapped channel is 2.34 miles long inside the community, so the exact crossing location matters.

Who owns electric lines in Elm Creek, Maverick County, and confirms conduit specs?

AEP Texas Central and Rio Grande Electric Cooperative report electric service in Maverick County, but that does not establish the provider at every Elm Creek address. Confirm the line owner for the specific location before deciding conduit specifications. We can hydrovac expose marked electric lines before drilling near them.

Does Maverick County control Blanca Lane in Elm Creek, and can a bore avoid cutting it?

Elm Creek has no city government, so street approval belongs to Maverick County or the state, according to who controls the road. Blanca Lane is a named community street. Directional boring can pass beneath a street without cutting the pavement, subject to the route, access and applicable approval.

What do Elm Creek home ages near Deer Run Boulevard mean for replacement bores?

Elm Creek’s median housing year is 2003 in the American Community Survey 2019 to 2023 estimates. Since 40% of homes date from 1960 to 1999 and 60% are newer, buried lines may reflect different build periods. A replacement bore near Deer Run Boulevard should account for existing services, which we expose before drilling nearby.

Does Copita soil in Elm Creek corrode steel, and what pipe can a bore use?

The USDA soil survey maps high steel corrosion risk across 70% of Elm Creek, including areas where Copita sandy clay loam is mapped. The line owner selects suitable materials or coatings for steel casing and tracer wire. HDPE is not affected by this soil corrosion concern, but the owner chooses the line material.

How much Texas811 notice is needed for Elm Creek work near Thompson Road?

For a bore near Thompson Road, make the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no more than 14 days ahead. If the Elm Creek start slips more than 14 days past the original notice, we submit a new request. For Elm Creek work, we have worn or moved marks refreshed through Texas811 before continuing.

How far is Elm Creek from Eagle Pass and Trinity’s Yukon, Oklahoma main office?

Eagle Pass is 4.5 miles south of Elm Creek, while Trinity’s Yukon yard is 589 road miles away, an 11.8 hour drive. That distance can affect equipment mobilization for a bore near FM 1588. We consider the route and scope when planning the job.

What should we consider when pricing directional boring in Elm Creek near US 277?

For work near US 277, price depends on bore length and pipe size, Copita soil and any bedrock, plus utilities that must be exposed. Pavement, pits, excavator time, backfill and creek crossings also affect the scope. The 589 road miles from Yukon can affect mobilization; there is no single price factor.

Where the Elm Creek facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Elm Creek

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Elm Creek, Texas

Type the address of your job in Elm Creek. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Elm Creek

Same county: Eidson Road · Chula Vista · Las Quintas Fronterizas · Rosita · Quemado · El Indio · Normandy. All counties: Texas county list.