Siesta Acres Texas Directional Boring: Catarina Clay, US 277 and Union Pacific
Quick Answer: US 277 runs through Siesta Acres, and Trinity Boring Solutions takes directional boring work here, also called horizontal directional drilling (HDD). A bore near Del Rio Boulevard has to account for existing streets and buried lines. Siesta Acres is 589 road miles from our Yukon, Oklahoma main office, with US 277 running through the community. Catarina clay and mapped clay at about 40 inches can grip the pipe, so staged reaming and a same day pull may matter. We plan the route around the actual ground and crossings.
Siesta Acres bores at a glance
- Unincorporated community in Maverick County, Texas. Population 1,866 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 589 miles, about 11.7 hours of driving.
- Ground: Catarina soil is mapped on 33 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 56 percent of the area.
- Highways inside the boundary: US 277 and FM 1588. State permit office: TxDOT Laredo District.
- Railroad track inside the boundary: Union Pacific.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring near US 277 in Siesta Acres?
Trinity Boring Solutions takes directional boring work in Siesta Acres, an unincorporated community in Maverick County. The Census Bureau counted 1,866 residents in 2020; it does not publish yearly estimates for unincorporated places. Along streets such as Del Rio Boulevard and Tina Drive, our crews can install water, sewer, gas, electric conduit and fiber lines, with the bore route set to the site and existing utilities.
Our main office is in Yukon, Oklahoma, and Siesta Acres work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and we have done directional boring since 1982; this page addresses Siesta Acres. Our record is no utility strike in over 25 years, a standard we bring to work around lines along Siesta Drive and US 277.

What kind of ground does Catarina soil mean for Siesta Acres bores?
The USDA soil survey maps Catarina soil across 33 percent of Siesta Acres, with Copita and Pryor soils also present. Surface mapping includes clay, clay loam and sandy clay loam. At about 40 inches below the surface, clay covers 56 percent of the mapped area, and average clay content is 48 percent. For Siesta Acres boring plans, we treat these as mapped soil patterns, not test borings. For a bore near Sueno Circle, clay can stay open but stick to the reamer and grip pipe.
| USDA soil survey, inside the Siesta Acres mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Catarina 33 percent, Copita 29 percent, Pryor 23 percent, Darl 6 percent and Elindio 5 percent |
| Texture at the surface | clay 33 percent, clay loam 29 percent and sandy clay loam 29 percent |
| Texture about 40 inches down | clay 56 percent, cemented bedrock 29 percent and variable 6 percent |
| Engineering class about 40 inches down | fat clay (CH) 33 percent and lean clay (CL) 28 percent |
| Average clay content about 40 inches down | 48 percent |
| Bedrock mapped within 60 inches | 56 percent of the area (0 percent hard rock, 56 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 90 percent of the area |
The USDA soil survey maps bedrock within 60 inches across 56 percent of Siesta Acres, with typical depth at 37 inches; it is weathered bedrock, not hard bedrock. In Siesta Acres, our planning reflects that seasonal water table and flood prone soils are not mapped. High steel corrosion risk covers 90 percent, so the line owner should weigh casing and tracer wire materials; HDPE avoids the steel concern. The Olmos Formation, a Late Cretaceous unit of clay, sandstone and coal, adds reason to check actual ground along US 277.
How do we plan a clay bore in Siesta Acres?
On Tina Drive, the mapped clay means we plan fluid and reaming to keep the hole workable without pushing pressure into pavement. When planning a bore beneath US 277 in Siesta Acres, we track the drill head from the surface and log depth and pitch as it advances.
- Catarina clay can ball up on a reamer, so we use thinner drilling fluid with polymer and open the hole in stages.
- Because clay may grip pipe, we have the pipe ready before the last ream and pull it the same day the hole is opened.
- Along paved streets such as Del Rio Boulevard, we watch fluid returns and pressure so clay does not lift the pavement.
- At a route near mapped weathered bedrock, we allow for slower drilling and keep checking depth and pitch as ground conditions change.

What does a bore have to cross in Siesta Acres near Union Pacific?
US 277 and FM 1588 run inside the mapped Siesta Acres community boundary, while US 277 Business is 0.8 miles outside it. A utility route crossing existing highway pavement needs boring or tunneling, with cover and casing set through the TxDOT permit. Del Rio Boulevard, Siesta Drive and Tina Drive are among the longest named streets. Their length and pavement affect where entry and exit pits can fit without cutting the traveled surface.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 277 | US highway | 0.9 roadway miles inside | State highway office |
| FM 1588 | State highway | 0.4 roadway miles inside | State highway office |
| US 277 Business | Highway nearby | 0.8 miles outside | State highway office |
| Union Pacific | Railroad | 0.68 track miles inside | The railroad |
| Seco Creek | Stream nearby | 0.2 miles outside | Checked for Corps of Engineers jurisdiction |
| Elm Creek | Stream nearby | 0.2 miles outside | Checked for Corps of Engineers jurisdiction |
| Maverick County Canal | Stream nearby | 0.7 miles outside | Checked for Corps of Engineers jurisdiction |
Union Pacific has 0.68 track miles in Siesta Acres on its Eagle Pass Subdivision, so a route that crosses the track needs the railroad’s agreement for crossing conditions. No street and rail crossings are mapped inside the community. No named streams are mapped inside it either, though Seco Creek and Elm Creek are each 0.2 miles from the boundary and unnamed drainage totals 1.28 miles. A creek route needs a jurisdiction check during planning.
Do I need a permit to bore in Maverick County in Siesta Acres?
For work on US 277 or FM 1588 in Siesta Acres, TxDOT utility permitting applies because these are US and state roads. The TxDOT Laredo District reviews the application, and the utility owner files through RULIS; we prepare the bore plan and profile for that filing. Work on streets in this unincorporated community is not handled by a city government. A Union Pacific track crossing needs an agreement from the railroad, and a Seco Creek crossing is checked for federal jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What lines are already in the ground in Maverick County in Siesta Acres?
The water provider for a specific Siesta Acres address has to be confirmed with Maverick County or the local water district before a bore is planned. Electric utilities reporting service in Maverick County are AEP Texas Central and Rio Grande Electric Cooperative; that county information does not identify the provider at every address. We confirm the line owner before planning an electric conduit bore along a street such as Del Rio Boulevard.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| AEP Texas Central and Rio Grande Electric Cooperative | Electric utilities reporting service in Maverick County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Siesta Acres housing’s median year built at 1987; 68 percent dates from 1960 to 1999 and 30 percent from 2000 or later. A replacement bore along Siesta Drive may meet older service lines as well as newer connections. Before drilling near a marked utility, we use hydrovac potholing to expose it; paint shows position, not depth.

Do you cover Siesta Acres and nearby Eagle Pass?
We take directional boring work in Siesta Acres and across Texas, including routes near Eagle Pass, the county seat 3.0 miles south. The community is in Maverick County, covers 0.41 square miles and sits at 762 feet elevation. ZIP code 78852 serves Siesta Acres. Seco Mines is 0.7 miles southwest, Fabrica is 1.0 mile south, Elm Creek is 1.5 miles north and Eagle Pass is 3.0 miles south. Our Yukon, Oklahoma yard is 589 road miles away, an 11.7 hour drive.
Places near Siesta Acres
- Directional boring in Seco Mines: 0.7 miles southwest
- Directional boring in Fabrica: 1 miles south
- Directional boring in Elm Creek: 1.5 miles north
- Directional boring in Eagle Pass: 3 miles south
- Directional boring in Las Quintas Fronterizas: 4.8 miles south
What boring work comes up on Tina Drive in Siesta Acres?
- Street service: A water or sewer service along Del Rio Boulevard can use a bore to avoid opening the street surface.
- Highway crossing: A route under US 277 needs a planned bore profile, TxDOT review and room for pits outside the travel lanes.
- Fiber conduit: A conduit route near Siesta Drive can pass beneath pavement, with marked utilities exposed before drilling near them.
- Rail crossing: A line crossing the Union Pacific Eagle Pass Subdivision needs the railroad’s agreement and crossing conditions.
- Drainage route: A bore near Seco Creek needs the channel location checked during planning, including jurisdiction review.
- Electric conduit: Before a route near Tina Drive is planned, we confirm which line owner serves that address.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a bore near Sueno Circle in Siesta Acres?
We can quote a bore near Sueno Circle with the address or map pin, what is going underground, pipe or conduit size and footage; a sketch or plans help. The route matters here: Catarina clay, nearby drainage and existing roads can change the equipment and bore layout. A crossing near US 277 also needs its own route and permit review.
A short, direct service bore on Tina Drive with clear plans is simpler to scope than a route under US 277 or the Union Pacific track. Length, pipe size, clay or weathered rock, utilities to expose, pavement, drainage crossings, pits and backfill all affect the job. Siesta Acres is 589 road miles from Yukon, so mobilization also enters the estimate. High profile or emergency work can add planning and equipment demands.
Questions people ask about boring in Siesta Acres
Does Trinity take directional boring jobs in Maverick County near Siesta Acres?
Yes. We take work in Siesta Acres and across Texas, and handle the project from the first call through the bore log. Our own crews and vetted partner contractor satellite yards can staff the work. For a route near US 277, we plan around the specific crossing and local ground rather than assuming every address has the same conditions.
How do Siesta Acres homes and buried lines near Del Rio Boulevard affect replacement bores?
The American Community Survey 2019 to 2023 estimates put the median housing year at 1987, with 68 percent of homes built from 1960 to 1999. That age range can mean a replacement route meets existing services near Del Rio Boulevard. We expose marked utilities with hydrovac before drilling close to them, since surface marks do not show burial depth.
Does Catarina soil in Siesta Acres corrode steel, and what pipe should I use?
The USDA soil survey maps high steel corrosion risk across 90 percent of Siesta Acres. The line owner chooses any coating for steel casing or tracer wire, while HDPE does not have the same soil corrosion concern. A route near Tina Drive still needs its actual utility location and material requirements checked before we plan the bore.
What ground will a bore encounter in Siesta Acres around Catarina soil?
Catarina is the largest mapped soil series, covering 33 percent of Siesta Acres. At about 40 inches below the surface, clay is mapped across 56 percent of the area, and cemented bedrock across 29 percent. These USDA soil survey patterns are not test borings, so a route near Sueno Circle still needs planning for conditions at the actual bore site.
Is there rock along a directional bore in Siesta Acres?
Rock is mapped within 60 inches across 56 percent of Siesta Acres, with typical bedrock depth at 37 inches. The mapped bedrock is weathered, and hard bedrock is not mapped within that depth. Along a route near US 277, we plan for the possibility of slower drilling where the soil meets weathered rock.
Who approves a bore beneath US 277 in Siesta Acres?
TxDOT reviews utility work in the US 277 right of way through its Laredo District. The utility owner submits the application in RULIS, while we prepare the bore plan and profile. For a US 277 crossing, the permit sets the approved route and cover; existing highway pavement is bored or tunneled beneath.
Can I reach Trinity after hours about an urgent bore near Tina Drive in Siesta Acres?
Yes. For Siesta Acres inquiries, a person answers Trinity’s phone 24 hours a day at (405) 409-7423. Call about the urgent work near Tina Drive and tell us what line is involved and where access is available. Our response service covers emergency work, while the actual bore plan still depends on site conditions and marked utilities.
How much notice does Texas811 need before a bore on Siesta Drive in Siesta Acres?
Request a Texas811 locate at least 48 hours before excavation on Siesta Drive, excluding Saturdays, Sundays and legal holidays; Texas811 describes this as at least two working days. The request cannot be made more than 14 days before the start. If the start moves more than 14 days past the original notice, submit a new request, and refresh worn or moved marks before work continues.
What affects the price of directional boring near US 277 in Siesta Acres?
The route and scope determine the price. Length, pipe size, Catarina clay or weathered rock, pavement, utility crossings and potholing all affect the work. A bore beneath US 277 needs highway planning, while a route involving Union Pacific requires railroad coordination. Distance from the Yukon yard also affects mobilization for Siesta Acres.
Where the Siesta Acres facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Siesta Acres
- U.S. Census Bureau, TIGER/Line 2024: Siesta Acres boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Siesta Acres population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Siesta Acres housing units and year built
- Macrostrat geologic map compilation: map units under Siesta Acres
- U.S. Department of Transportation, North American Rail Network: track owners in Maverick County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Maverick County
- U.S. Geological Survey, Elevation Point Query Service: Siesta Acres elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Siesta Acres
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Siesta Acres
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Siesta Acres, Texas
Type the address of your job in Siesta Acres. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Siesta Acres
Same county: Eidson Road · Chula Vista · Rosita · Radar Base · Quemado · El Indio · Normandy. All counties: Texas county list.
