Normandy Texas Directional Boring: Laredo Silty Clay Loam, US 277 and Del Rio Boulevard
Quick Answer: Along US 277 and Del Rio Boulevard, Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Normandy, Texas. Normandy is 575 road miles from our Yukon, Oklahoma main office, with FM 1590 also inside the mapped community. Laredo silty clay loam is the main ground, and its sticky clay can ball on a reamer or grip the pipe. We adjust fluid and ream in stages.
Normandy bores at a glance
- Unincorporated community in Maverick County, Texas. Population 54 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 575 miles, about 11.4 hours of driving.
- Ground: Laredo soil is mapped on 70 percent of the area, with silty clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: US 277 and FM 1590. State permit office: TxDOT Laredo District.
- Railroad track inside the boundary: none mapped.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring near US 277 in Normandy?
Laredo silty clay loam is the main ground, and Trinity Boring Solutions takes directional boring work in Normandy, Maverick County. The Census Bureau counted 54 people in 2020; it does not publish yearly estimates for unincorporated places. We install water, sewer, gas, electric conduit and fiber along routes such as US 277, FM 1590, Del Rio Boulevard, Taylor Road or Lowe Street, with the path checked against marked lines.
Our main office is in Yukon, Oklahoma, and Normandy work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For a Lowe Street service, our range includes 3/4 inch service lines; a longer route along US 277 can call for casing up to 48 inch. Our family business began in 1965, and since 1982 we have done directional boring; Normandy’s US 277 crossings call for careful planning.

What is Laredo soil like to bore in Normandy?
The USDA soil survey maps Laredo soil across 70 percent of Normandy, with Montell soil at 21 percent and Lagloria soil at 9 percent. Laredo silty clay loam is mapped across 65 percent of the area, with another 5 percent in the 1 to 3 percent slope class. At about 40 inches below the surface, silty clay loam accounts for 70 percent and clay for 21 percent; very fine sandy loam accounts for 9 percent. We use mapped Laredo, Montell, and Lagloria soil patterns as context, not as substitutes for test borings in Normandy. The clay can cling to tooling and pipe.
| USDA soil survey, inside the Normandy mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Laredo 70 percent, Montell 21 percent and Lagloria 9 percent |
| Texture at the surface | silty clay loam 70 percent, clay 21 percent and very fine sandy loam 9 percent |
| Texture about 40 inches down | silty clay loam 70 percent, clay 21 percent and very fine sandy loam 9 percent |
| Engineering class about 40 inches down | lean clay (CL) 70 percent, fat clay (CH) 21 percent and silty clay (CL ML) 9 percent |
| Average clay content about 40 inches down | 33 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 30 percent of the area |
The USDA soil survey does not map bedrock in the top five feet of Normandy, though that does not rule out deeper rock. It also maps no seasonal water table or flood prone soils there. High steel corrosion risk covers 30 percent of the mapped area, so the line owner should consider casing and tracer wire materials; HDPE avoids that soil concern. The geologic map includes Alluvium, undivided, of Cenozoic age, as well as Mesozoic sedimentary rocks including carbonate and shale. Deeper rock could change the tooling and pace.
How do crews bore Normandy’s silty clay loam?
Normandy’s Laredo silty clay loam can hold a bore open, but sticky clay may build on the reamer or grip the pipe. We plan the fluid and pull around that behavior.
- Because Laredo silty clay loam can cling to a reamer, we use a thinner fluid mix with polymer and open the hole in stages before pulling pipe.
- The mapped Montell clay share in Normandy is 21 percent; we watch the fluid returns so pressure does not lift pavement along US 277 or Del Rio Boulevard.
- Before the drill nears a marked line on Lowe Street, we use hydrovac potholing to expose it; surface paint gives position, not depth.
- We track the drill head from the surface and log depth and pitch, including on a Taylor Road route where the mapped ground can vary.

What might a bore cross along Del Rio Boulevard in Normandy?
A Normandy bore may need to pass beneath US 277, FM 1590 or one of the community’s named streets, including Del Rio Boulevard. US 277 has 0.9 mapped roadway miles inside the community and FM 1590 has 0.1. Del Rio Boulevard is the longest named street at 0.87 miles, followed by Taylor Road at 0.3 miles and Lowe Street at 0.17 miles. A route plan should identify the exact pavement and marked utilities so the bore can be placed without cutting the road surface.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 277 | US highway | 0.9 roadway miles inside | State highway office |
| FM 1590 | State highway | 0.1 roadway miles inside | State highway office |
| Maverick County Water Control Canal | Stream nearby | 0.2 miles outside | Checked for Corps of Engineers jurisdiction |
| Canon Grande | Stream nearby | 0.2 miles outside | Checked for Corps of Engineers jurisdiction |
| Quemado Creek | Stream nearby | 0.2 miles outside | Checked for Corps of Engineers jurisdiction |
| Grande | Stream nearby | 0.8 miles outside | Checked for Corps of Engineers jurisdiction |
Rail mapping shows no track inside Normandy or within one mile outside the mapped community boundary, and no street and rail crossing is mapped there. No named stream crosses the community either. The Maverick County Water Control Canal, Canon Grande and Quemado Creek are each 0.2 miles from the boundary; Grande is 0.8 miles away. Normandy also has 1.15 miles of mapped unnamed drainage, so a route near a drainage needs a site specific plan. Our map shows no lakes or ponds within one mile of Normandy, though nearby Quemado Creek remains relevant to crossing review.
Who approves a bore in Normandy, Maverick County?
Normandy is an unincorporated community, so it has no city government; county or state authority applies to its streets. For work in the right of way of US 277 or FM 1590, TxDOT reviews the utility permit through its Laredo District. The utility owner files in TxDOT’s RULIS system, while we prepare the bore plan and profile and work under that owner’s permit. Existing highway pavement is bored or tunneled beneath, and the permit sets the required cover. Normandy has no mapped railroad track. A crossing of the nearby Maverick County Water Control Canal or another waterway is checked for federal jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities are reported around Normandy in Maverick County?
For an address near Lowe Street, the water provider must be confirmed with the county or local water district before a bore is planned; EPA drinking water records do not tie a system to this unincorporated place. AEP Texas Central and Rio Grande Electric Cooperative report electric service in Maverick County. That does not identify the electric line owner at every Normandy address, so we confirm the owner before planning an electric conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| AEP Texas Central and Rio Grande Electric Cooperative | Electric utilities reporting service in Maverick County | EIA Form 861 | Confirm the line owner by address |
Housing figures are not published reliably for a place as small as Normandy. That means a service route along Taylor Road or Lowe Street may involve a long run from a line on another road, rather than a short connection. Maverick County averages 19.7 inches of precipitation a year, with September the wettest month at 3.2 inches and February the driest at 0.7. Before drilling near a marked line, we hydrovac pothole it; paint shows position, not depth.

Where is Normandy in relation to Eagle Pass?
Normandy is in northwestern Maverick County, Texas, along US 277, at an elevation of 772 feet. The mapped community covers 0.26 square miles and uses ZIP code 78877. Quemado is 3.0 miles northwest; Radar Base is 5.3 miles southeast. Elm Creek is 11.1 miles southeast, Siesta Acres is 12.4 miles southeast and Seco Mines is 12.5 miles southeast. Eagle Pass, the county seat and nearest larger city, is 15.2 miles southeast. Our Yukon, Oklahoma main office is 575 road miles away, a 11.4 hour drive.
Places near Normandy
- Directional boring in Quemado: 3 miles northwest
- Directional boring in Radar Base: 5.3 miles southeast
- Directional boring in Elm Creek: 11.1 miles southeast
- Directional boring in Siesta Acres: 12.4 miles southeast
- Directional boring in Seco Mines: 12.5 miles southeast
- Directional boring in Eagle Pass: 15.2 miles southeast
What kinds of bores may come up near Taylor Road in Normandy?
- Highway crossing: A route beneath US 277 uses a bore plan that accounts for the paved travel lanes and the utility owner’s TxDOT permit.
- Street service: A water or sewer connection along Lowe Street can pass beneath pavement, with marked utilities exposed before drilling near them.
- Fiber conduit: A conduit route along Del Rio Boulevard can stay below the street surface while the drill head is tracked and its depth logged.
- Drainage route: A bore near the 1.15 miles of mapped unnamed drainage in Normandy needs a path that accounts for the ground and drainage crossing.
- Canal crossing: Work near the Maverick County Water Control Canal calls for the crossing location to be reviewed during planning.
- Electric conduit: Before planning a conduit route near Taylor Road, we confirm the electric line owner serving that address in Maverick County.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a Normandy quote near the Maverick County Water Control Canal?
For a Normandy quote, start with the address or map pin, such as a location on Del Rio Boulevard or near the Maverick County Water Control Canal. Tell us what will go in the ground, then give the pipe or conduit size and estimated footage. A sketch or plans showing the route and nearby crossings help us review the work.
In Normandy, soil and crossing conditions are early price factors: Laredo silty clay loam can affect reaming, while work beneath US 277 or near the canal changes the crossing plan. Length and pipe or conduit size matter too. We also consider marked utilities to expose, pavement or concrete, pits, excavator time and sand backfill. Mobilization reflects the 575 road miles from Yukon, and high profile or emergency work can add planning needs.
Questions people ask about boring in Normandy
Does Trinity Boring Solutions take Normandy jobs in Maverick County, and who staffs them?
Yes, we take directional boring work in Normandy, Maverick County. Our own crews handle jobs, and work may also be done from a satellite yard run by a drilling contractor we have vetted. In Maverick County, we work with you from the first call through the bore log, regardless of which crew handles the site work.
Who is responsible for Lowe Street in Normandy, and does a bore require cutting it?
Normandy has no city government because it is an unincorporated community, so county or state authority applies to its streets. A directional bore can pass under Lowe Street without an open cut. We still need the route and marked utilities identified before choosing a bore path.
Can Laredo soil in Normandy corrode steel, and what pipe should I use?
The USDA soil survey maps high steel corrosion risk across 30 percent of Normandy. The line owner should consider that when choosing steel casing or tracer wire materials. Along Del Rio Boulevard, we recognize HDPE does not share steel’s corrosion concern. The mapped Laredo silty clay loam is useful planning information, not a site specific test.
What ground does a bore pass through in Normandy’s Laredo soil?
The USDA soil survey maps Laredo soil across 70 percent of Normandy. At about 40 inches down, 70 percent of the mapped texture is silty clay loam and 21 percent is clay; very fine sandy loam makes up 9 percent. Clay can stick to tooling, so crews plan the fluid and reaming accordingly.
Could a directional bore near FM 1590 in Normandy encounter rock, even though bedrock is not mapped in the top five feet?
For crossings near Quemado, we remember bedrock is not mapped in Normandy’s top five feet, but deeper rock is not ruled out. The geologic map shows Cenozoic Alluvium, undivided, and Mesozoic sedimentary rocks including carbonate and shale. If a bore reaches rock, the ground may call for slower drilling or different tooling.
Who approves a bore under US 277 in Normandy, and which TxDOT office reviews it?
TxDOT’s Laredo District reviews a utility permit for work in the US 277 right of way in Normandy. The utility owner submits the application in TxDOT’s RULIS system; we prepare the bore plan and profile and work under the permit issued to that owner. The permit controls the project requirements.
Can I reach Trinity after hours about an urgent bore near Lowe Street in Normandy?
Yes, a person answers Trinity’s phone, (405) 409-7423, 24 hours a day. For an urgent job near Lowe Street, be ready to describe the address or map pin, the line involved and the immediate work area so we can understand the request.
How much notice does Texas811 need for a Normandy bore along Del Rio Boulevard, and what if marks move?
The person arranging a bore along Del Rio Boulevard must contact Texas811 at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. When a TxDOT Laredo District start slips more than 14 days past the original notice, we submit a new request. If marks along Taylor Road are worn or moved, we refresh them through Texas811 before we continue work.
What affects the cost of a directional bore near US 277 in Normandy?
The Normandy job scope drives the price: bore length and pipe or conduit size, Laredo soil conditions, and the number of utilities to expose all matter. Pavement along US 277, drainage crossings, pits, excavator time and backfill can change the work. The 575 road miles from Yukon main office to Normandy shape our mobilization schedule.
Where the Normandy facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Normandy
- U.S. Census Bureau, TIGER/Line 2024: Normandy boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Normandy population count
- Macrostrat geologic map compilation: map units under Normandy
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Maverick County
- U.S. Geological Survey, Elevation Point Query Service: Normandy elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Normandy
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Normandy
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Normandy, Texas
Type the address of your job in Normandy. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Normandy
Same county: Eidson Road · Chula Vista · Las Quintas Fronterizas · Rosita · Fabrica · El Indio. All counties: Texas county list.
