trinityboringsolutions.com

South Padre Island Texas Directional Boring: Mustang Fine Sand, Texas State Highway 100, Laguna Madre

Quick Answer: For lines beneath Texas State Highway 100, we take directional boring, also called horizontal directional drilling (HDD), work in South Padre Island. Our Yukon main office is 746 road miles away, and we staff island work with our crews and vetted partner yards. Mustang fine sand can fall in behind the drill, so staged reaming and drilling fluid help keep the hole open. Along Padre Boulevard, we expose marked utilities before the drill approaches them.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

South Padre Island bores at a glance

  • Incorporated city in Cameron County, Texas. Population 2,076 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 746 miles, about 14.8 hours of driving.
  • Ground: Mustang soil is mapped on 35 percent of the area, with fine sand about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Texas State Highway 100. State permit office: TxDOT Pharr District.
  • Railroad track inside the boundary: none mapped.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for boring under Texas State Highway 100 in South Padre Island?

South Padre Island is 746 road miles from our Yukon yard, and we staff work with our own crews and vetted partner contractors. The Census Bureau Vintage 2024 estimate puts the town population at 2,076. We install water, sewer, gas, electric conduit and fiber lines beneath streets such as Padre Boulevard or State Park Road 100, where a planned route can avoid open cuts.

Our main office is in Yukon, Oklahoma, and South Padre Island work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and we have done directional boring since 1982; South Padre Island is 746 road miles from our Yukon main office. For a route near Padre Boulevard, our record of no utility strikes in over 25 years matters because existing lines must be located before drilling.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show beneath South Padre Island and Mustang soil?

The USDA soil survey maps Mustang soil across 35 percent of South Padre Island, with Mustang fine sand, saline, frequently flooded covering 30 percent. Galveston soil accounts for 25 percent, and Daggerhill for 12 percent. Fine sand makes up 81 percent of the mapped texture at about 40 inches below the surface; fine gravelly fine sand accounts for 4 percent. The mapped clay average at that depth is 4 percent. These are mapped conditions, not test borings, so a site check still matters before setting the bore path.

USDA soil survey, inside the South Padre Island city limitsWhat is mapped
Soil series mappedMustang 35 percent, Galveston 25 percent, Daggerhill 12 percent, Beaches (miscellaneous area) 10 percent and Twinpalms 4 percent
Texture at the surfacefine sand 85 percent
Texture about 40 inches downfine sand 81 percent and fine gravelly fine sand 4 percent
Engineering class about 40 inches downsand with silt (SP SM) 76 percent, silty sand (SM) 5 percent and clayey sand (SC) 4 percent
Average clay content about 40 inches down4 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches74 percent of the area
Flood prone soils74 percent of the area
High corrosion risk for uncoated steel0 percent of the area

The USDA soil survey does not map bedrock in the top five feet of South Padre Island, though that says nothing about deeper ground. A seasonal water table is mapped within 60 inches across 74 percent of the area, so pits in Mustang sand may need pumping. Flood prone soils also cover 74 percent. No area is mapped with high steel corrosion risk. The geologic map shows Holocene barrier island deposits, mostly permeable fine grained sand with silt, shells and muddier material landward.

What does it take to bore South Padre Island’s fine sand?

South Padre Island’s fine sand cuts readily but can cave behind the drill. We plan the hole around the mapped wet ground and keep the pipe ready for the final ream.

  1. Mustang fine sand can cave behind the bit, so we use drilling fluid to support the hole and ream in stages before pulling pipe.
  2. With seasonal water table mapped within 60 inches across much of South Padre Island, we keep pits small and pump them if water collects.
  3. Before the drill nears a marked line along Padre Boulevard, we hydrovac expose it because surface paint shows position, not depth.
  4. We track the drill head from the surface and log its depth and pitch, which helps hold the planned route through fine sand.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

Where does a line have to go under Texas State Highway 100 in South Padre Island?

Texas State Highway 100 has 0.9 mapped roadway miles inside South Padre Island, so a route crossing it needs a bore plan that fits the state right of way. Padre Boulevard runs 8.29 miles in town, State Park Road 100 runs 7.85 miles, and Gulf Boulevard runs 2.54 miles. Those long streets can carry buried services beside pavement and driveways. A directional bore can keep those surfaces intact while bringing a new line across the street.

CrossingTypeMapped extentWho has a say
Texas State Highway 100State highway0.9 roadway miles insideState highway office
Laguna MadreLake or pond25 acres, insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside South Padre Island or within one mile outside its limits, and no rail crossing is mapped in town. No named streams are mapped inside town or within one mile outside it. Laguna Madre is mapped within the limits, and 0.22 miles of unnamed drainage are shown. No street crossing of a named stream is mapped. If a route crosses Laguna Madre, the water crossing needs a check for federal jurisdiction during planning.

Who approves a bore in Cameron County near South Padre Island?

For work in the Texas State Highway 100 right of way, the utility owner files the permit through TxDOT’s RULIS system, not the drilling contractor. We provide the bore plan and profile for that filing, and the TxDOT Pharr District reviews it. At a highway crossing, electric, communication and water lines need 60 inches of cover below the lowest crossed grade; pressurized sewer also needs 60 inches. A district permit can set a different depth. South Padre Island is an incorporated town, so its streets, including Padre Boulevard, are city streets, and we plan street bores accordingly. A Laguna Madre crossing also needs a jurisdiction check during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground in Cameron County near South Padre Island?

For a specific Padre Boulevard address, the water provider has to be confirmed with the city, Cameron County or the local water district before a bore is planned. EPA drinking water records for Texas do not tie water systems to towns. AEP Texas Central, Brownsville Public Utilities Board and Magic Valley Electric Cooperative report service in Cameron County, but the electric line owner for the route must be confirmed before a conduit bore.

Line ownerWhat it isSourceSize
AEP Texas Central, Brownsville Public Utilities Board and Magic Valley Electric CooperativeElectric utilities reporting service in Cameron CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The ACS 2019 to 2023 estimates put South Padre Island’s median housing year at 1985; we account for fine sand at the surface when checking utility routes before boring. The survey estimates 79 percent of homes were built from 1960 to 1999, 19 percent in 2000 or later and 2 percent before 1960. Replacement work along State Park Road 100 may meet older buried lines. Before drilling near a marked water line or an electric line identified as AEP Texas Central, Brownsville Public Utilities Board or Magic Valley Electric Cooperative, we hydrovac pothole to check its depth.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

Do you cover South Padre Island and nearby Laguna Heights?

South Padre Island is an incorporated town in Cameron County, with 2.69 square miles of land and an elevation of 3 feet. Its ZIP code is 78597. Laguna Heights is 6.1 miles southwest, and Port Isabel is 6.2 miles southwest; Port Isabel is also the nearest larger city. Brownsville, the county seat, is 19.4 miles southwest. From our Yukon yard, the road trip is 746 miles and takes 14.8 hours. We take work across Texas, including routes outside the town limits near Laguna Vista, 7.9 miles west.

Places near South Padre Island

Which jobs call for a bore near State Park Road 100 in South Padre Island?

  • Highway crossing: A line beneath Texas State Highway 100 needs a planned bore through the right of way rather than an open cut across pavement.
  • Water service: A service route near Padre Boulevard needs the address specific water provider confirmed before the bore path is set.
  • Fiber conduit: A conduit along State Park Road 100 can pass under pavement and driveways without cutting those surfaces.
  • Drainage crossing: A route near the mapped 0.22 miles of unnamed drainage needs a path that accounts for wet, flood prone ground.
  • Laguna Madre crossing: A proposed line crossing the mapped lake needs a jurisdiction check during planning before the bore route is settled.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote work near Padre Boulevard in South Padre Island?

Start with a map pin or address near Padre Boulevard; the exact spot shows whether a route meets Texas State Highway 100, pavement or mapped drainage. Tell us what will go underground, the pipe or conduit size and the footage. A sketch or plans help us set the route and check the access needed for pits.

A short route in Mustang fine sand with clear access may be straightforward to plan. The scope changes with length, pipe size, wet ground, utility crossings and exposed lines, pavement, drainage, pit work and sand backfill. A Texas State Highway 100 crossing adds permit planning, while the 746 road miles from Yukon affect mobilization. High profile or emergency work can also add planning steps.

Questions people ask about boring in South Padre Island

Does Trinity take directional boring jobs in Cameron County near South Padre Island, and who staffs them?

Yes. We take directional boring work in South Padre Island and staff it with our own crews or vetted partner drilling contractors. For a Texas State Highway 100 crossing, we stay with you from the first call through the bore log, whatever crew is on site. We can plan routes for local streets such as Padre Boulevard.

How does South Padre Island housing near State Park Road 100 affect replacement bores?

The American Community Survey 2019 to 2023 five year estimates place the median housing year at 1985, with 79 percent of homes built from 1960 to 1999. A replacement bore near State Park Road 100 may have to pass existing services, so we expose marked lines before drilling close to them.

Can groundwater or flood prone Mustang soil affect bore pits in South Padre Island?

Yes. The USDA soil survey maps seasonal water table within 60 inches across 74 percent of South Padre Island and flood prone soils across 74 percent. Mustang fine sand is also mapped as frequently flooded. We plan small pits and allow for pumping if water collects.

What ground does a bore pass through in South Padre Island, including Mustang soil?

The USDA soil survey maps Mustang soil across 35 percent of town, and fine sand makes up 81 percent of the mapped texture at about 40 inches. That sand can cut easily but may cave behind the drill, so staged reaming and fluid support help keep the hole open.

Will a directional bore in South Padre Island hit rock or pass through fine sand at the surface along the planned route?

Bedrock is not mapped in the top five feet of South Padre Island, but deeper rock is not ruled out. The geologic map instead shows Holocene barrier island deposits, including fine sand, silt and shells. A site specific route still needs to account for ground changes.

Who approves a bore under Texas State Highway 100 in South Padre Island?

The utility owner applies for the right of way permit through TxDOT’s RULIS system. The TxDOT Pharr District reviews it, and we provide the bore plan and profile. For Texas State Highway 100, the permit sets the final requirements, including any cover depth adjustment.

Does Trinity cover Laguna Heights and rural sites outside South Padre Island?

Yes. We take work near Laguna Heights, 6.1 miles southwest of South Padre Island, and at rural sites outside the town limits. Send the site location so we can review the route, access and distance from our Yukon yard.

How much Texas 811 notice do I need for a bore near Padre Boulevard in South Padre Island?

Texas law requires a Texas811 request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. For a Padre Boulevard job, if work slips more than 14 days past the notice, make a new request. For a planned bore on Padre Boulevard, we have worn or moved marks refreshed through Texas811 before work continues.

What affects the cost of a directional bore under Texas State Highway 100 in South Padre Island?

For a bore along State Park Road 100, we base pricing on the job scope, including route and crossing requirements. Length, pipe size, Mustang fine sand, utility crossings, pavement, drainage, pits and backfill all matter. A Texas State Highway 100 crossing adds permit planning, and mobilization from Yukon is affected by the 746 road miles. We assess the route details before pricing.

Where the South Padre Island facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in South Padre Island

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in South Padre Island, Texas

Type the address of your job in South Padre Island. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for South Padre Island

Same county: Brownsville · Harlingen · San Benito · Los Fresnos · La Feria · Cameron Park · Primera · Laureles · Combes · La Paloma · Rancho Viejo · Santa Rosa. All counties: Texas county list.