McQueeney Texas Directional Boring: Lewisville Silty Clay, FM 725 and Guadalupe River
Quick Answer: Can we bore beneath a McQueeney road, track or creek without cutting the surface? We do directional boring, also called horizontal directional drilling (HDD), for crossings such as FM 725 in McQueeney. The Yukon main office is 469 road miles away, and a bore near Terminal Loop Road needs that travel considered in planning. Lewisville silty clay is common here, so sticky cuttings and clay that grips pipe call for careful fluid and reaming choices. Guadalupe River crossings need a route planned around the channel.
McQueeney bores at a glance
- Unincorporated community in Guadalupe County, Texas. Population 2,397 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 469 miles, about 8.8 hours of driving.
- Ground: Lewisville soil is mapped on 28 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 3 percent of the area.
- Highways inside the boundary: FM 725 and FM 78. State permit office: TxDOT San Antonio District.
- Railroad track inside the boundary: Union Pacific, with 7 mapped street and rail crossings.
- Named streams inside the boundary: Guadalupe River, Youngs Creek and Long Creek.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who handles directional boring under FM 725 in McQueeney?
Can we bore beneath a McQueeney road, track or creek without cutting the surface? We take directional boring work in McQueeney, an unincorporated community in Guadalupe County. The Census Bureau counted 2,397 people here in 2020. A water or sewer line can run beneath FM 725, while electric conduit or fiber can be routed under a Terminal Loop Road driveway without an open cut.
Our main office is in Yukon, Oklahoma, and McQueeney work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We began directional boring in 1982. More than four decades of work helps us plan for mapped Lewisville silty clay, which can ball on a reamer and grip pipe if the hole sits open too long.

What does the Lewisville soil survey show beneath McQueeney?
The USDA soil survey maps Lewisville soil across 28 percent of McQueeney, with Sunev at 27 percent. The surface texture is silty clay across 30 percent and clay across 26 percent of the mapped community. At about 40 inches below the surface, clay is mapped across 31 percent and silty clay across 29 percent; average clay content at that depth is 40 percent. We treat mapped patterns beneath McQueeney as planning context, not test borings, before setting a boring route. For a bore near FM 725, the sticky ground can load a reamer and hold tight around pipe, so the drilling plan matters.
| USDA soil survey, inside the McQueeney mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Lewisville 28 percent, Sunev 27 percent, Branyon 9 percent, Tinn 7 percent and Houston Black 6 percent |
| Texture at the surface | silty clay 30 percent, loam 28 percent and clay 26 percent |
| Texture about 40 inches down | clay 31 percent, silty clay 29 percent and loam 28 percent |
| Engineering class about 40 inches down | lean clay (CL) 53 percent and fat clay (CH) 38 percent |
| Average clay content about 40 inches down | 40 percent |
| Bedrock mapped within 60 inches | 3 percent of the area (0 percent hard rock, 3 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 10 percent of the area |
| High corrosion risk for uncoated steel | 60 percent of the area |
Bedrock is not mapped in the top five feet across most of McQueeney, though it is mapped within 60 inches in 3 percent of the area. The USDA geologic map includes Alluvium, undivided, of Cenozoic age, and Late Cretaceous sedimentary material described as sand, chalk and mud. No seasonal water table is mapped within 60 inches, while flood prone soils cover 10 percent. High steel corrosion risk is mapped across 60 percent, so the line owner should consider casing and tracer wire materials; HDPE is not affected by that soil corrosion concern.
How do crews bore through McQueeney clay?
Lewisville silty clay and the mapped 40 percent average clay content mean a bore near FM 725 can get sticky. We adjust fluid and reaming to keep the hole manageable and the pipe moving.
- At a Lewisville soil site, we use a thinner drilling fluid and polymer, then ream in stages so sticky clay does not load the reamer.
- Where heavy clay is mapped near FM 725, we watch fluid returns and control pressure to reduce the chance of lifting pavement.
- Before drilling near a marked utility on Terminal Loop Road, we hydrovac pothole it because surface paint shows location, not depth.
- Along the Guadalupe River, we plan depth below the channel and check Corps jurisdiction during planning; pits stay in the dirt on each bank.

Where might a McQueeney line cross the Guadalupe River?
FM 725 and FM 78 run inside the mapped McQueeney community boundary. Interstate 10 touches the boundary, while Texas State Highway 46 and US 90 are nearby. A bore beneath an existing highway keeps pavement intact. Terminal Loop Road is the longest named street, followed by Short Cut Road and Woodlake Drive. Those routes help define where a water service, sewer line or fiber conduit could need a bore rather than an open cut.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 725 | State highway | 4.3 roadway miles inside | State highway office |
| FM 78 | State highway | 2.1 roadway miles inside | State highway office |
| Interstate 10 | Highway nearby | Runs along or touches the city limits | State highway office |
| Texas State Highway 46 | Highway nearby | 0.4 miles outside | State highway office |
| US 90 | Highway nearby | 0.5 miles outside | State highway office |
| US 90 Alternate | Highway nearby | 1.5 miles outside | State highway office |
| Union Pacific | Railroad | 2.97 track miles inside | The railroad |
| Guadalupe River | Stream | 6.01 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Youngs Creek | Stream | 3.24 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Long Creek | Stream | 0.1 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Deadman Creek | Stream nearby | 0.9 miles outside | Checked for Corps of Engineers jurisdiction |
| Lake Mc Queeney | Lake or pond | 264 acres, inside | Checked for Corps of Engineers jurisdiction |
Union Pacific has 2.97 track miles inside McQueeney, and 7 mapped street and rail crossings create places where a proposed route may meet the track. A crossing under the Union Pacific line needs the railroad’s agreement. Guadalupe River has 6.01 channel miles here, and Youngs Creek has 3.24; 5 street crossings of named streams are mapped. Lake Mc Queeney is also inside the community boundary, so a water crossing needs review during planning.
Do I need a permit for a McQueeney bore in Guadalupe County?
McQueeney has no city government, so streets and permits fall to Guadalupe County or the state, depending on the route. A bore in FM 725, FM 78, Interstate 10, Texas State Highway 46 or US 90 right of way needs a TxDOT utility permit. For a McQueeney highway crossing, we account for TxDOT San Antonio District review when planning the boring route and schedule. The utility owner files through TxDOT’s online RULIS system; we prepare the bore plan and profile and work under the owner’s permit. TxDOT cover requirements set depth, including 60 inches for electric and communication lines at highway crossings and 60 inches for water lines. A Union Pacific crossing also needs its railroad agreement, and Guadalupe River or creek crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns lines in the ground in McQueeney, Guadalupe County?
The water provider for a specific McQueeney address has to be confirmed with the city, the county or the local water district before a bore is planned. Public records do not identify a provider tied to this place. Utilities reporting electric service in Guadalupe County include AEP Texas Central, City of New Braunfels, City of San Antonio, City of Seguin, Bluebonnet Electric Cooperative, Guadalupe Valley Electric Cooperative and Pedernales Electric Cooperative. We confirm the line owner for the address before planning an electric conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| AEP Texas Central, City of New Braunfels, City of San Antonio, City of Seguin, Bluebonnet Electric Cooperative, Guadalupe Valley Electric Cooperative and Pedernales Electric Cooperative | Electric utilities reporting service in Guadalupe County | EIA Form 861 | Confirm the line owner by address |
We treat McQueeney’s 1991 median housing year in the American Community Survey 2019 to 2023 five year estimates as background, not a route condition. McQueeney’s housing age estimates are 13 percent before 1960, 54 percent from 1960 to 1999 and 33 percent in 2000 or later; we use them only as background. That mix can mean replacing older service near FM 725 as well as adding new connections. Before drilling near a marked line, we use hydrovac potholing to expose it; paint shows position, not depth.

What is near McQueeney, including Seguin?
McQueeney is an unincorporated community in Guadalupe County, with 4.09 square miles of mapped land and an elevation of 544 feet. McQueeney’s ZIP codes are 78123, 78130 and 78155, useful for identifying the area when we discuss underground work. Seguin, the county seat and nearest larger city, is 4.8 miles east. Lake Dunlap is 4.9 miles northwest, and Marion is 6.0 miles west. The Yukon, Oklahoma main office is 469 road miles away, an 8.8 hour drive. That distance is part of planning a bore near FM 725 or the Guadalupe River.
Places near McQueeney
- Directional boring in Seguin: 4.8 miles east
- Directional boring in Lake Dunlap: 4.9 miles northwest
- Directional boring in Marion: 6 miles west
- Directional boring in Santa Clara: 6.8 miles west
- Directional boring in Geronimo: 6.9 miles northeast
What boring work comes up on Terminal Loop Road in McQueeney?
- Highway crossing: A bore beneath FM 725 can carry water, sewer or conduit under the pavement without cutting the roadway.
- Street service: A new or replacement line along Terminal Loop Road can pass beneath a driveway while keeping the surface intact.
- Rail crossing: A proposed route beneath the Union Pacific track needs the railroad’s agreement and its crossing conditions.
- River crossing: A Guadalupe River bore needs a planned route below the channel and a jurisdiction check during planning.
- Fiber route: A conduit bore beneath Short Cut Road can connect a service without trenching across the street.
- Lake crossing: A line near Lake Mc Queeney can be planned as a bore to avoid cutting across the shore.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send to quote a McQueeney bore near Union Pacific?
For a crossing near Union Pacific track or FM 725, send the job location as an address or map pin, what will go in the ground, the pipe or conduit size and the footage. A sketch or plans help show the route, pits and nearby crossings. A Terminal Loop Road address also helps us place the work against the mapped streets.
Price starts with the 469 road miles from Yukon, then the ground and route. Lewisville clay can change reaming and fluid needs; a Union Pacific track crossing or Guadalupe River route adds crossing planning. Pipe size and length, marked utilities to expose, pavement, creek or drainage crossings, pits, excavator time and sand backfill also affect the work. High profile or emergency scheduling can change the scope.
Questions people ask about boring in McQueeney
Does Trinity take directional boring jobs in McQueeney and Guadalupe County?
Yes. We take work in McQueeney and across Texas, and the crews are ours or come from partner drilling contractors we have vetted. The required service setup does not depend on a local office. For a proposed crossing beneath FM 725 or a route near the Guadalupe River, Trinity stays your contact through the bore log.
What ground should I expect in McQueeney around Lewisville soil?
The USDA soil survey maps Lewisville soil across 28 percent of McQueeney. At about 40 inches, clay covers 31 percent of the mapped area and silty clay 29 percent. Those mapped textures can make cuttings sticky and cause clay to grip pipe, so the bore plan should account for fluid and staged reaming.
Will a bore in McQueeney hit rock in Lewisville soil?
Bedrock is not mapped in the top five feet across most of McQueeney, but it is mapped within 60 inches in 3 percent of the area. The geologic map includes Cenozoic Alluvium, undivided, and Late Cretaceous sedimentary material. A site specific bore still needs a plan for changing ground beneath a route such as FM 78.
Who approves a McQueeney bore under FM 725?
TxDOT reviews work in FM 725 right of way through the TxDOT San Antonio District. The utility owner files the application in TxDOT’s RULIS system, and we provide the bore plan and profile for its submission. The permit sets the route conditions and depth for the crossing.
What does a McQueeney bore under Union Pacific track require?
A crossing beneath the Union Pacific track needs an agreement from the railroad that owns it. The railroad sets crossing requirements such as casing, depth and flagging. With 2.97 track miles inside the mapped McQueeney boundary, the proposed bore route needs to be checked against the actual track location.
Can you bore a line beneath the Guadalupe River in McQueeney?
A bore can be planned beneath the Guadalupe River, which has 6.01 channel miles in McQueeney. The route needs to stay below the channel, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. Soil and access at the proposed banks also shape the bore plan.
How much 811 notice is needed for a McQueeney bore near Terminal Loop Road?
Texas811 needs a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. Paint near Terminal Loop Road gives a line’s position, not its depth. If marks wear off or move, request refreshed marks through Texas811 before work continues.
How far is McQueeney from the Yukon office, and does Seguin change the job?
The Yukon main office is 469 road miles from McQueeney, an 8.8 hour drive. Seguin is 4.8 miles east and is the county seat and nearest larger city, but it does not change the distance from Yukon. Mobilization, the route and ground near FM 725 all enter the job plan.
What affects the cost of a directional bore near FM 725 in McQueeney?
The route and scope determine the price, not one factor alone. The 469 road miles from Yukon affect mobilization; Lewisville clay can affect drilling time and fluid choices. Pipe size and length, utility exposures, pavement, Union Pacific or creek crossings, pits, excavator time, sand backfill and emergency work also matter.
Where the McQueeney facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside McQueeney
- U.S. Census Bureau, TIGER/Line 2024: McQueeney boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: McQueeney population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: McQueeney housing units and year built
- Macrostrat geologic map compilation: map units under McQueeney
- U.S. Department of Transportation, North American Rail Network: track owners in Guadalupe County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Guadalupe County
- U.S. Geological Survey, Elevation Point Query Service: McQueeney elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to McQueeney
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in McQueeney
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in McQueeney, Texas
Type the address of your job in McQueeney. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for McQueeney
Same county: Cibolo · Schertz · New Braunfels · Redwood · Selma · New Berlin · Zuehl · Staples · Kingsbury. All counties: Texas county list.
