New Chapel Hill Texas Directional Boring: Lilbert Soil, Prairie Creek, Texas State Highway 64
Quick Answer: We take directional boring, also called horizontal directional drilling (HDD), in New Chapel Hill for crossings such as Texas State Highway 64. From our Yukon, Oklahoma main office, the 323 road miles to New Chapel Hill shape mobilization for work near Wolfe Lane, staffed by our own crews and vetted partner contractors. Lilbert loamy fine sand covers 28% of the mapped area, so keeping the hole stable matters. A Prairie Creek crossing needs a route planned beneath the channel, with creek jurisdiction checked during planning.
New Chapel Hill bores at a glance
- Incorporated city in Smith County, Texas. Population 649 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 323 miles, about 6.4 hours of driving.
- Ground: Lilbert soil is mapped on 28 percent of the area, with sandy clay loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 2 percent of the area.
- Highways inside the boundary: Texas State Highway 64. State permit office: TxDOT Tyler District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Prairie Creek.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can I call for directional boring near Prairie Creek in New Chapel Hill?
Trinity Boring Solutions takes directional boring work in New Chapel Hill, Smith County, where the Census Bureau Vintage 2024 estimate puts the population at 649. Wolfe Lane and Sundown Trail are examples of routes where a water, sewer, gas, electric conduit or fiber line may need a bore instead of an open cut. From Yukon, our crews and vetted partner contractors handle the work, with Trinity as your contact.
Our main office is in Yukon, Oklahoma, and New Chapel Hill work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore is roughly 4,100 feet of 48 inch pipe under the Arkansas River in Tulsa. Beside that reach, a typical Wolfe Lane job is a shorter service or utility crossing planned around the route and ground.

What kind of ground does New Chapel Hill have near Lilbert soil?
Lilbert loamy fine sand is the largest mapped soil unit in New Chapel Hill, covering 28% of the area, while Cuthbert fine sandy loam covers 18%. The USDA soil survey maps sandy clay loam at about 40 inches below the surface across 72% of the area. Average clay content at that depth is 25%, and 12% of the area is mapped as loamy fine sand there. These are mapped patterns, not test borings; a bore near Prairie Creek still needs a route specific plan.
| USDA soil survey, inside the New Chapel Hill city limits | What is mapped |
|---|---|
| Soil series mapped | Lilbert 28 percent, Cuthbert 20 percent, Tenaha 14 percent, Mattex 13 percent and Darco 12 percent |
| Texture at the surface | loamy fine sand 55 percent, fine sandy loam 27 percent and loam 13 percent |
| Texture about 40 inches down | sandy clay loam 72 percent, clay loam 13 percent and loamy fine sand 12 percent |
| Engineering class about 40 inches down | lean clay (CL) 54 percent, clayey sand (SC) 29 percent and silty sand (SM) 13 percent |
| Average clay content about 40 inches down | 25 percent |
| Bedrock mapped within 60 inches | 2 percent of the area (0 percent hard rock, 2 percent weathered rock) |
| Seasonal water table within 60 inches | 22 percent of the area |
| Flood prone soils | 13 percent of the area |
| High corrosion risk for uncoated steel | 24 percent of the area |
The USDA soil survey maps bedrock within 60 inches in 2% of New Chapel Hill, with a typical bedrock depth of 28 inches, so the map does not rule out shallow rock on a particular route. Seasonal water tables are mapped within 60 inches across 22%, and flood prone soils cover 13%, which matters for pits near Prairie Creek. High steel corrosion risk is mapped across 24%, so the line owner should consider casing and tracer wire materials. The geologic map shows Queen City Sand of Eocene age, described as sand and clay; conditions can change below the survey depth.
How do we drill New Chapel Hill sandy clay loam?
For New Chapel Hill sandy clay loam, we match the drilling fluid and reaming steps to the route rather than assume one setting fits every lot. Wolfe Lane access and the mapped soil layers both matter.
- Lilbert loamy fine sand is mapped across 28% of New Chapel Hill, so we stage the reaming and use drilling fluid to help keep the hole supported.
- With sandy clay loam mapped at about 40 inches across 72% of the area, we adjust fluid returns and reamer passes to the route near Wolfe Lane.
- Before drilling near a marked line along Private Road 2244, we expose it with hydrovac; surface paint does not show its depth.
- We track the drill head from the surface and log depth and pitch on routes near Prairie Creek, where flood prone soils are mapped across 13% of the city.

Which roads, tracks or creeks does a New Chapel Hill bore cross near Texas State Highway 64?
Texas State Highway 64 runs for 2.0 mapped roadway miles inside New Chapel Hill, so a crossing plan must account for the state highway pavement and right of way. Wolfe Lane is the longest named street at 0.87 miles in the city; Sundown Trail covers 0.42 miles, and Private Road 2244 covers 0.28 miles. Those street routes may call for a bore to keep pavement and driveways intact. We check the proposed path and access before setting the pits.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Texas State Highway 64 | State highway | 2 roadway miles inside | State highway office |
| Prairie Creek | Stream | 1.43 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Lowry Creek | Stream nearby | 0.1 miles outside | Checked for Corps of Engineers jurisdiction |
| Everett Creek | Stream nearby | 0.1 miles outside | Checked for Corps of Engineers jurisdiction |
| Lake Tyler | Lake or pond | 2,401 acres, nearby | Checked for Corps of Engineers jurisdiction |
| Pleasant Acres Lake | Lake or pond | 97 acres, nearby | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside New Chapel Hill or within one mile outside its limits, and none is mapped at a street crossing. Prairie Creek runs 1.43 channel miles in the city, with two mapped street crossings of named streams. Lake Tyler and Pleasant Acres Lake are within one mile but outside city limits. A Prairie Creek route needs its channel and banks considered, and creek crossing planning includes a check for U.S. Army Corps of Engineers jurisdiction.
Who has to sign off on a New Chapel Hill bore in Smith County?
In New Chapel Hill, city streets such as Wolfe Lane belong to the incorporated city, while work in the Texas State Highway 64 right of way needs a TxDOT utility permit. At a state highway crossing, electric and communication lines need at least 60 inches of cover below the lowest crossed grade, and water lines need 60 inches; pressurized sewer lines also need 60 inches. Along the right of way, electric and communication lines need 48 inches and water lines need 36 inches. TxDOT’s Tyler District reviews the utility owner’s RULIS application; Trinity prepares the bore plan and profile for that owner. Texas811 needs notice at least 48 hours before excavation, excluding weekends and legal holidays, and no earlier than 14 days before it. A Prairie Creek crossing is checked for federal waterway jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities serve New Chapel Hill in Smith County?
The provider for a specific New Chapel Hill address is not identified by the available EPA drinking water records, so confirm the water provider with the city, county or local water district before planning a bore near Sundown Trail. Oncor Electric Delivery Company, Southwestern Electric Power, Cherokee County Electric Cooperative Association, Upshur Rural Electric Cooperative and Wood County Electric Cooperative report service in Smith County. That does not identify the electric line owner at every address, so we confirm the owner before planning a conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Oncor Electric Delivery Company, Southwestern Electric Power, Cherokee County Electric Cooperative Association, Upshur Rural Electric Cooperative and Wood County Electric Cooperative | Electric utilities reporting service in Smith County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put New Chapel Hill’s median housing year at 1989. The survey estimates 23% of homes were built before 1960, 46% from 1960 to 1999 and 31% in 2000 or later. A replacement route near Sundown Trail may encounter older lines, while a newer service may need a fresh path. We hydrovac pothole each marked utility on the planned bore path before the drill approaches; locate paint shows position, not depth.

What is near New Chapel Hill and Whitehouse?
New Chapel Hill is in Smith County, at an elevation of 421 feet, and covers 2.39 square miles. Its ZIP code is 75707. Whitehouse lies 6.2 miles southwest, and Tyler is 8.1 miles west; Tyler is also the county seat. Arp is 8.5 miles southeast, Troup is 10.9 miles south and Overton is 11.6 miles east. Our Yukon yard is 323 road miles away, a 6.4 hour drive, so that trip is part of mobilization for work around Texas State Highway 64.
Places near New Chapel Hill
- Directional boring in Whitehouse: 6.2 miles southwest
- Directional boring in Tyler: 8.1 miles west
- Directional boring in Arp: 8.5 miles southeast
- Directional boring in Troup: 10.9 miles south
- Directional boring in Overton: 11.6 miles east
Which jobs call for a bore near Prairie Creek in New Chapel Hill?
- Highway crossing: A Texas State Highway 64 bore keeps the existing pavement intact and follows the cover and permit plan for the line type.
- Creek crossing: A Prairie Creek route needs a path beneath the channel, with its banks and waterway jurisdiction checked during planning.
- Water service: A service bore near Wolfe Lane starts with confirming the provider for that address and tracing the route to the property.
- Fiber conduit: Along Sundown Trail, a conduit route can pass beneath pavement while marked utilities are exposed before the drill approaches.
- Replacement line: A bore near Private Road 2244 can replace an older buried service without opening the full street route.
- Drainage route: Near Prairie Creek, a bore path can avoid cutting the channel banks while pits are placed on each side.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of directional boring near Wolfe Lane in New Chapel Hill?
For a New Chapel Hill quote, tell us where the route starts and ends, such as along Wolfe Lane, and what line will go in the ground. Include the pipe or conduit size and estimated footage. A sketch or plans showing a Prairie Creek crossing or a route beneath Texas State Highway 64 help us see the path, access and crossings before we scope the work.
The 323 road miles from Yukon to New Chapel Hill affect mobilization before the bore starts. Lilbert loamy fine sand, the sandy clay loam mapped below the surface, and any rock or wet ground can change the drilling plan. The number of utilities to expose, pits, pavement, creek crossings and equipment time also matter. A Texas State Highway 64 crossing brings right of way planning into the scope, while emergency timing or a difficult access point near Wolfe Lane can add work.
Questions people ask about boring in New Chapel Hill
Does Trinity Boring Solutions take directional boring jobs in New Chapel Hill, Smith County?
Yes, we take directional boring jobs in New Chapel Hill, Smith County. Our own crews and vetted partner drilling contractors staff the work, while you deal with Trinity from the first call through the bore log. For a route near Wolfe Lane, we plan around the line, access and mapped ground.
Who is responsible for Private Road 2244 in New Chapel Hill, and can a bore avoid cutting it?
New Chapel Hill is incorporated, so its city streets are city streets; Texas State Highway 64 is under state jurisdiction. A bore beneath Private Road 2244 can avoid cutting the street surface, subject to the route and site conditions. We locate and expose marked utilities before drilling near them.
How old are buried lines near Sundown Trail in New Chapel Hill, and can a bore replace them?
The American Community Survey 2019 to 2023 estimates New Chapel Hill’s median housing year as 1989, with 23% of homes built before 1960. A replacement bore near Sundown Trail can follow a planned route without opening the whole street. We expose marked lines first because paint shows location, not depth.
Can groundwater or flood prone ground affect bore pits near Prairie Creek in New Chapel Hill?
It can: the USDA soil survey maps seasonal water tables within 60 inches across 22% of New Chapel Hill and flood prone soils across 13%. Near Prairie Creek, we account for wet pits and plan the bore beneath the channel. The specific route determines pit placement and water handling.
What ground does a New Chapel Hill bore pass through in Lilbert soil?
Lilbert loamy fine sand is mapped across 28% of New Chapel Hill, and sandy clay loam is mapped at about 40 inches across 72%. Those survey patterns are not test borings. On a route near Wolfe Lane, staged reaming and suitable drilling fluid help manage changing soil conditions.
Will a New Chapel Hill bore hit rock?
The USDA soil survey maps bedrock within 60 inches in 2% of New Chapel Hill, with a typical depth of 28 inches, so the route can vary. The geologic map shows Queen City Sand of Eocene age, described as sand and clay. A site specific bore plan is needed to account for what lies below the surface.
Does Trinity cover Whitehouse and rural sites outside New Chapel Hill?
We take work across Texas, including Whitehouse and rural sites outside New Chapel Hill. Whitehouse is 6.2 miles southwest of the city, but access and route details still shape the plan. Send the site location and proposed path so we can consider the local road and utility crossings.
How much notice does Texas811 need for a New Chapel Hill bore along Wolfe Lane?
For a bore along Wolfe Lane, Texas law requires a Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If the start slips more than 14 days past the original notice, request a new ticket. Have worn or moved marks refreshed through Texas811 before work continues.
What affects the cost of a New Chapel Hill directional bore under Texas State Highway 64?
The price depends on the route and scope, including bore length, pipe or conduit size, soil, utilities to expose, pavement and creek crossings. Texas State Highway 64 adds right of way planning, while the 323 road miles from Yukon affect mobilization. Access, pits, equipment time and emergency timing can also change the work involved.
Where the New Chapel Hill facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside New Chapel Hill
- U.S. Census Bureau, TIGER/Line 2024: New Chapel Hill boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: New Chapel Hill
- U.S. Census Bureau, American Community Survey 2019 to 2023: New Chapel Hill housing units and year built
- Macrostrat geologic map compilation: map units under New Chapel Hill
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Smith County
- U.S. Geological Survey, Elevation Point Query Service: New Chapel Hill elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to New Chapel Hill
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in New Chapel Hill
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in New Chapel Hill, Texas
Type the address of your job in New Chapel Hill. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for New Chapel Hill
Same county: Lindale · Bullard · Hideaway · Emerald Bay · Noonday · Winona. All counties: Texas county list.
