Overton Texas Directional Boring: Tenaha Soil, Union Pacific Track and Little Rabbit Creek
Quick Answer: Can you get a line beneath Union Pacific track in Overton without cutting it? We take directional boring, also called horizontal directional drilling (HDD), for crossings like that and the FM 850 corridor. Overton is 346 road miles from our Yukon, Oklahoma main office, and Front Street is one local route where access and crossing layout matter. The USDA soil survey maps Tenaha loamy fine sand across 29 percent of the city, while sandy clay loam is common at about 40 inches, so crews plan for both a loose surface and a firmer, clay bearing layer.
Overton bores at a glance
- Incorporated city in Rusk County and Smith County, Texas. Population 2,305 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 346 miles, about 6.8 hours of driving.
- Ground: Tenaha soil is mapped on 32 percent of the area, with sandy clay loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 37 percent of the area.
- Highways inside the boundary: FM 850, FM 3053, Texas State Highway 135 and FM 2089. State permit office: TxDOT Tyler District.
- Railroad track inside the boundary: Union Pacific and a short line railroad (reporting mark HOB), with 9 mapped street and rail crossings.
- Named streams inside the boundary: Little Rabbit Creek and Bowles Creek.
- Public water: City of Overton, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Does anyone handle directional boring near Union Pacific in Overton?
Trinity Boring Solutions takes directional boring work in Overton, including routes near Union Pacific track in Rusk County. Can you get a line beneath Front Street without cutting it? We plan crossings for water, sewer, gas, electric conduit or fiber along streets such as Front Street and Warren Street. The Census Bureau Vintage 2024 estimate puts Overton at 2,305 people, so service routes may range from street frontage to longer connections.
Our main office is in Yukon, Oklahoma, and Overton work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For Overton projects, our family business began in 1965, and we have done directional boring since 1982. In Overton, our 3/4 inch service lines through 48 inch casing range can fit routes near FM 850, with bore lengths from 10 feet to 5,000 feet.

What does Tenaha soil mean for a bore in Overton?
Tenaha soil is a major mapped ground type in Overton, so a bore route can move between sandy surface material and clay bearing soil below. The USDA soil survey maps Tenaha series across 32 percent of the city, including Tenaha loamy fine sand on 29 percent of the mapped area. Loamy fine sand makes up 72 percent of the surface texture, while fine sandy loam accounts for 23 percent. At about 40 inches, sandy clay loam is mapped across 70 percent and clay across 14 percent. For Overton planning, these mapped patterns inform our work but are not test borings.
| USDA soil survey, inside the Overton city limits | What is mapped |
|---|---|
| Soil series mapped | Tenaha 32 percent, Lilbert 30 percent, Cuthbert 10 percent, Kirvin 9 percent and Darco 8 percent |
| Texture at the surface | loamy fine sand 72 percent and fine sandy loam 23 percent |
| Texture about 40 inches down | sandy clay loam 70 percent, clay 14 percent and loamy fine sand 8 percent |
| Engineering class about 40 inches down | lean clay (CL) 41 percent, clayey sand (SC) 31 percent and silty clayey sand (SC SM) 8 percent |
| Average clay content about 40 inches down | 28 percent |
| Bedrock mapped within 60 inches | 37 percent of the area (0 percent hard rock, 37 percent weathered rock) |
| Seasonal water table within 60 inches | 10 percent of the area |
| Flood prone soils | 7 percent of the area |
| High corrosion risk for uncoated steel | 20 percent of the area |
The USDA soil survey maps weathered bedrock within 60 inches across 37 percent of Overton, with a typical depth of 43 inches; hard bedrock is not mapped in that interval. A hard soil bit may suit weathered sandstone, though progress can slow near the Reklaw Formation, an Eocene layer of sandstone and claystone. Seasonal water tables are mapped within 60 inches across 10 percent, and flood prone soils across 7 percent, so pits and Little Rabbit Creek crossings need attention to water and channel depth. High steel corrosion risk covers 20 percent, so the line owner should consider casing and tracer wire materials.
How do crews bore sandy clay loam in Overton?
In Overton, crews plan around sandy clay loam at about 40 inches and loamy fine sand at the surface. That shift calls for a controlled fluid plan and staged reaming, especially near Front Street pavement.
- Tenaha loamy fine sand covers 29 percent of the mapped area, so crews use drilling fluid and staged reaming to help keep loose soil from collapsing behind the bit.
- With sandy clay loam mapped at about 40 inches across 70 percent of Overton, crews adjust fluid and reaming to manage the firmer layer without opening the hole too soon.
- Where the Reklaw Formation’s weathered sandstone is encountered, a hard soil bit may be suitable; crews slow down and track depth and pitch as the ground changes.
- At Little Rabbit Creek, crews plan for channel depth and possible water in pits, then check for Corps jurisdiction during planning before setting the crossing route.

Where does a line have to go under Front Street in Overton?
Overton routes may need to pass beneath FM 850, FM 3053, Texas State Highway 135 or FM 2089, all mapped inside the city. Texas State Highway 323 is 0.4 miles outside the limits, and Texas State Highway 42 is 1.1 miles away. Front Street is the longest named street at 1.87 miles within the city; Henderson Street runs 1.29 miles and Warren Street 1.28 miles. Those streets and highway corridors can put pavement, access and right of way constraints on the bore alignment.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 850 | State highway | 3 roadway miles inside | State highway office |
| FM 3053 | State highway | 1.6 roadway miles inside | State highway office |
| Texas State Highway 135 | State highway | 1.1 roadway miles inside | State highway office |
| FM 2089 | State highway | 0.6 roadway miles inside | State highway office |
| Texas State Highway 323 | Highway nearby | 0.4 miles outside | State highway office |
| Texas State Highway 42 | Highway nearby | 1.1 miles outside | State highway office |
| Union Pacific | Railroad | 5.65 track miles inside | The railroad |
| a short line railroad (reporting mark HOB) | Railroad | 1.59 track miles inside | The railroad |
| Little Rabbit Creek | Stream | 1.58 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Bowles Creek | Stream | 0.59 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Rabbit Creek | Stream nearby | 0.4 miles outside | Checked for Corps of Engineers jurisdiction |
| Overton Lake | Lake or pond | 21 acres, inside | Checked for Corps of Engineers jurisdiction |
Union Pacific track runs 5.65 miles through Overton on the Palestine Subdivision, and the short line railroad marked HOB adds 1.59 miles. Public records map 9 street and rail crossings in the city, so a route near Front Street may need a track crossing agreement. Little Rabbit Creek runs 1.58 channel miles and Bowles Creek 0.59 miles; one mapped street crossing of a named stream makes creek depth and access relevant. Overton Lake covers 21 acres inside the limits.
Do I need a permit to bore in Rusk County and Overton?
For a bore along FM 850 or another state route in Overton, the line owning utility applies for the TxDOT utility permit, and the TxDOT Tyler District reviews it. The owner files through RULIS; we prepare the bore plan and profile and work under the permit issued to that utility. Because Overton is incorporated, we account for city ownership when planning directional boring beneath its city streets. A Union Pacific track crossing needs an agreement from the railroad owner that sets crossing conditions, and TxDOT asks for a copy when the line also uses highway right of way. Little Rabbit Creek is checked for Corps jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns lines near the City of Overton water system?
The City of Overton owns the public water system, which uses groundwater wells and serves 2,275 people through 934 service connections. For a water bore near FM 850, that system’s location and the electric line owner need to be confirmed before the route is set. Rusk County electric service is reported by Oncor Electric Delivery Company, Southwestern Electric Power, Cherokee County Electric Cooperative Association, Deep East Texas Electric Cooperative, Rusk County Electric Cooperative and Upshur Rural Electric Cooperative. The specific line owner must be confirmed before an electric conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Overton | Public water system | Groundwater wells | 934 connections, 2,275 people served |
| Oncor Electric Delivery Company, Southwestern Electric Power, Cherokee County Electric Cooperative Association, Deep East Texas Electric Cooperative, Rusk County Electric Cooperative and Upshur Rural Electric Cooperative | Electric utilities reporting service in Rusk County and Smith County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 estimates put Overton’s median housing year at 1966; 36 percent of homes were built before 1960, and 16 percent in 2000 or later. That age mix can mean work on existing service lines as well as new connections near Warren Street. Before a drill approaches marked utilities, we use hydrovac potholing to expose them; paint shows position, not depth. That check matters around the City of Overton water lines and whichever electric provider serves the address.

What is near Overton, including Kilgore?
Overton sits in Rusk and Smith counties, with 80 percent of its 6.7 square miles in Rusk County and 20 percent in Smith County. The city is at 492 feet elevation, and ZIP code 75684 serves the area. New London is 2.5 miles east, Arp is 5.8 miles southwest, and Kilgore is 10.6 miles northeast. Henderson, the Rusk County seat, is 13.2 miles southeast. Our Yukon, Oklahoma yard is 346 road miles away, a 6.8 hour drive, which can affect mobilization for work near FM 850 or Little Rabbit Creek.
Places near Overton
- Directional boring in New London: 2.5 miles east
- Directional boring in Arp: 5.8 miles southwest
- Directional boring in Kilgore: 10.6 miles northeast
- Directional boring in New Chapel Hill: 11.6 miles west
- Directional boring in Liberty City: 12.3 miles north
What would we bore near Warren Street in Overton?
- Highway crossing: A bore beneath FM 850 can keep a utility line out of the pavement while the route follows the state highway corridor.
- Street service: A water or sewer line along Warren Street can pass beneath driveways rather than opening a trench across each access.
- Rail crossing: A bore beneath Union Pacific track needs an agreement with the railroad owner before the alignment and crossing details are settled.
- Creek crossing: A Little Rabbit Creek bore needs a route planned below the channel, with water and creek access considered at the entry and exit pits.
- Water connection: A service near the City of Overton system can be planned around groundwater lines and the marked utilities along the proposed route.
- Fiber conduit: A conduit route near Front Street can avoid cutting the street surface while connecting into the planned path.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of a bore near Little Rabbit Creek in Overton?
A map pin matters near Little Rabbit Creek because it shows whether the route reaches the channel, a street or a nearby access point. For an Overton quote, send the address or pin, what will go underground, the pipe or conduit size and the footage. A sketch or plans help us place the proposed bore against Front Street, FM 850 or another route.
The 346 road miles from Yukon are part of planning a job near Little Rabbit Creek, followed by the ground and crossing scope. Tenaha loamy fine sand, sandy clay loam and weathered bedrock can affect drilling and reaming. Price also reflects pipe or conduit size, length, utilities to expose, pavement, creek crossings, pits, excavator time and sand backfill. A Union Pacific crossing or work along FM 850 can add coordination and permit planning; high profile or emergency work also affects the scope.
Questions people ask about boring in Overton
Does Trinity take directional boring jobs in Rusk County near Overton, and how are crews assigned?
Yes, Trinity Boring Solutions takes work in Overton and across Texas, including Rusk County. Our own crews and partner contractor crews from vetted satellite yards can handle a job, while you work with Trinity from the first call through the bore log. Routes near FM 850 are planned around the address and the proposed line.
Who approves a bore under FM 850 in Overton?
The line owning utility applies for the TxDOT utility permit, and the TxDOT Tyler District reviews the application for FM 850. The utility files through RULIS, while we prepare the bore plan and profile and work under the owner’s permit. The permit covers the proposed crossing route and may set its required depth.
What does an Overton bore under Union Pacific track require?
A crossing beneath Union Pacific track in Overton needs an agreement with the railroad owner before the route is set. The agreement determines crossing conditions such as casing, depth and flagging. Public records show 5.65 track miles for Union Pacific within the city, so the exact crossing location matters.
Can a line be bored beneath Little Rabbit Creek in Overton?
Yes, a line can be planned beneath Little Rabbit Creek in Overton, with the bore depth set to pass under the channel. The creek has 1.58 channel miles inside the city. During planning, the crossing is checked for U.S. Army Corps of Engineers jurisdiction, and crews account for water near the pits.
Who runs Overton’s public water system, and where does its water come from?
The City of Overton runs the public water system, which draws from groundwater wells. We use Overton’s 934 service connections and 2,275 people served to frame underground utility planning. For a bore near the water system, the proposed route and marked lines need to be checked before drilling begins.
Which company owns electric lines in Rusk County near Overton, and who confirms conduit specs?
Several utilities report electric service in Rusk County, including Oncor Electric Delivery Company and Southwestern Electric Power. That list does not identify the provider at every Overton address. The specific line owner should be confirmed before a conduit bore, and the owner can confirm the conduit specifications for the planned route.
How far is Overton from the Yukon office near Kilgore, and does distance matter?
Our Yukon, Oklahoma main office is 346 road miles and a 6.8 hour drive from Overton, shaping travel planning. Kilgore is 10.6 miles northeast of Overton. The distance from Yukon can affect mobilization for a job near Warren Street, along with the bore length, ground and crossings.
How much Texas811 notice is needed for a bore near Front Street in Overton?
For a bore near Front Street, submit a Texas811 locate request at least 48 hours before excavation, not counting Saturdays, Sundays and legal holidays. The request cannot be made earlier than 14 days before work. If the start slips more than 14 days past the original notice, submit a new request; worn or moved marks must be refreshed before work continues.
What affects the cost of directional boring near FM 850 in Overton?
The job scope sets the price for a bore near FM 850, including its length, pipe or conduit size, soil and rock, and utilities that must be exposed. Pavement, creek or drainage crossings, pits, excavator time and sand backfill also matter. The 346 road miles from Yukon affect mobilization, and Union Pacific track can add crossing coordination.
Where the Overton facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Overton
- U.S. Census Bureau, TIGER/Line 2024: Overton boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Overton
- U.S. Census Bureau, American Community Survey 2019 to 2023: Overton housing units and year built
- Macrostrat geologic map compilation: map units under Overton
- U.S. EPA Safe Drinking Water Information System: public water systems serving Overton
- U.S. Department of Transportation, North American Rail Network: track owners in Rusk County and Smith County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Rusk County and Smith County
- U.S. Geological Survey, Elevation Point Query Service: Overton elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Overton
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Overton
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Overton, Texas
Type the address of your job in Overton. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Overton
County: Smith County directional boring. Same county: Henderson · Lake Cherokee · Tatum · Mount Enterprise · Reklaw · Easton · Tyler · Whitehouse · Lindale · Bullard · Hideaway · Troup. All counties: Texas county list.
