Whitehouse Texas Directional Boring: Redsprings Soil, Blackhawk Creek and Union Pacific
Quick Answer: The City of Whitehouse owns the public water system, while several providers report electric service in Smith County, so line ownership needs checking before a bore near Main Street. We take directional boring, also called horizontal directional drilling (HDD), across Whitehouse, including routes near Blackhawk Creek where surface crossings matter. Whitehouse is 325 road miles from our Yukon, Oklahoma main office, a distance that affects mobilization for work along Texas State Highway 110. The USDA soil survey maps clay at 40 inches across 44 percent of the area, and sticky ground can load a reamer and grip pipe.
Whitehouse bores at a glance
- Incorporated city in Smith County, Texas. Population 9,781 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 325 miles, about 6.4 hours of driving.
- Ground: Redsprings soil is mapped on 25 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 26 percent of the area.
- Highways inside the boundary: Texas State Highway 110, FM 346, FM 848 and FM 2964. State permit office: TxDOT Tyler District.
- Railroad track inside the boundary: Union Pacific (line shown as out of service) and Union Pacific, with 3 mapped street and rail crossings.
- Named streams inside the boundary: Blackhawk Creek and Hill Creek.
- Public water: City of Whitehouse, surface water bought from another system.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring in Whitehouse near Blackhawk Creek?
The City of Whitehouse owns the public water system, and Trinity Boring Solutions handles directional boring near Blackhawk Creek after the electric line owner is confirmed. Whitehouse is in Smith County and had a population of 9,781 in the Census Bureau Vintage 2024 estimate. We can bore water, sewer, gas, electric conduit and fiber routes beneath Main Street or other local crossings, keeping the surface intact where the plan allows.
Our main office is in Yukon, Oklahoma, and Whitehouse work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. A short service bore near Willingham Road can use 3/4 inch line, while larger work can call for 48 inch casing; bore lengths range from 10 feet to 5,000 feet. We are a family business started in 1965, with directional boring since 1982, experience we bring to routes around Blackhawk Creek.

What is Whitehouse ground like to bore in Redsprings soil?
Whitehouse ground includes Redsprings soil, which the USDA soil survey maps across 25 percent of the city. The mapped Redsprings units include very gravelly sandy loam on both 2 to 5 percent and 8 to 25 percent slopes. Surface texture is fine sandy loam across 51 percent and very gravelly sandy loam across 25 percent. At about 40 inches below the surface, the survey maps clay across 44 percent and sandy clay loam across 36 percent. These are mapped patterns, not test borings, so the route still needs field checks.
| USDA soil survey, inside the Whitehouse city limits | What is mapped |
|---|---|
| Soil series mapped | Redsprings 25 percent, Elrose 15 percent, Cuthbert 10 percent, Attoyac 10 percent and Bowie 7 percent |
| Texture at the surface | fine sandy loam 51 percent, very gravelly sandy loam 25 percent and loamy fine sand 8 percent |
| Texture about 40 inches down | clay 44 percent, sandy clay loam 36 percent and clay loam 15 percent |
| Engineering class about 40 inches down | lean clay (CL) 71 percent, clayey sand (SC) 15 percent and fat clay (CH) 9 percent |
| Average clay content about 40 inches down | 34 percent |
| Bedrock mapped within 60 inches | 26 percent of the area (0 percent hard rock, 26 percent weathered rock) |
| Seasonal water table within 60 inches | 30 percent of the area |
| Flood prone soils | 7 percent of the area |
| High corrosion risk for uncoated steel | 54 percent of the area |
The USDA soil survey maps weathered bedrock within 60 inches across 26 percent of Whitehouse, with typical bedrock depth at 53 inches; bedrock is not mapped within 40 inches. That points to slower drilling in some deeper sections, though the map does not identify hard bedrock in that interval. A seasonal water table is mapped within 60 inches across 30 percent, and flood prone soils across 7 percent, so Blackhawk Creek pits may need pumping and a route below the channel. High steel corrosion risk covers 54 percent. The mapped Queen City Sand unit is Eocene age, with sand and clay that can change along a bore.
How do we bore Whitehouse clay without losing control?
We adjust the bore plan to Whitehouse clay and the Redsprings mapped soils, rather than treating the route as uniform. Along a Main Street crossing, we keep the hole stable while watching surface conditions.
- Redsprings soils include gravelly sandy loam, while clay is mapped deeper in Whitehouse; we use staged reaming and adjust fluid so sticky cuttings do not pack the tool.
- Where heavy clay is mapped around Whitehouse, we watch fluid returns and keep pressure controlled near Main Street pavement to reduce the chance of lifting the surface.
- We hydrovac pothole every marked utility along a Whitehouse bore path before drilling near it; locate paint beside Texas State Highway 110 does not show line depth.
- For a Whitehouse route near Blackhawk Creek, we track the drill head from the surface and log depth and pitch, then plan pits with seasonal water and creek ground in mind.

Which roads, tracks or creeks can a Whitehouse bore cross near Main Street?
A Whitehouse bore can be planned beneath Texas State Highway 110, FM 346, FM 848 or FM 2964, subject to the applicable right of way permit. Main Street runs 3.54 miles within the city, followed by Hagan Road at 1.86 miles and Willingham Road at 1.21 miles. These are possible route corridors, not a promise that every crossing is feasible. Boring can keep pavement and driveways uncut, with entry and exit pits placed off the traveled surface where the site allows.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Texas State Highway 110 | State highway | 4.5 roadway miles inside | State highway office |
| FM 346 | State highway | 4.1 roadway miles inside | State highway office |
| FM 848 | State highway | 0.7 roadway miles inside | State highway office |
| FM 2964 | State highway | 0.1 roadway miles inside | State highway office |
| Union Pacific (line shown as out of service) | Railroad | 1.64 track miles inside | The railroad |
| Union Pacific | Railroad | 0.67 track miles inside | The railroad |
| Blackhawk Creek | Stream | 4.12 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Hill Creek | Stream | 0.47 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Brier Branch | Stream nearby | Along the boundary | Checked for Corps of Engineers jurisdiction |
| Bell Branch | Stream nearby | 0.7 miles outside | Checked for Corps of Engineers jurisdiction |
| Gilley Creek | Stream nearby | 1 miles outside | Checked for Corps of Engineers jurisdiction |
| Lake Tyler | Lake or pond | 2,401 acres, nearby | Checked for Corps of Engineers jurisdiction |
Union Pacific has two mapped track segments in Whitehouse: 1.64 track miles on a line shown as out of service and 0.67 track miles on another segment. Public mapping shows 3 street and rail crossings, so a track route needs coordination with the railroad that owns it. Blackhawk Creek runs 4.12 channel miles in the city, and Hill Creek 0.47; mapped street crossings of named streams total 13. Lake Tyler is within one mile but outside city limits. Creek and lake routes need a jurisdiction check during planning.
Whose permission does a Whitehouse bore in Smith County need?
For a Whitehouse crossing on Texas State Highway 110 or FM 346, TxDOT reviews the work through its Tyler District, and the utility owner files the right of way application in TxDOT’s online RULIS system. We prepare the bore plan and profile for that owner’s application and work under its permit. TxDOT rules call for boring or tunneling beneath existing highway pavement; the permit can set the required cover. Whitehouse is incorporated, so its city streets, including Main Street, belong to the city. A crossing of Union Pacific track also requires an agreement with the railroad owner. Blackhawk Creek routes are checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities are already in the ground in Whitehouse near the City of Whitehouse system?
The City of Whitehouse public water system uses purchased surface water and reports 3,300 service connections serving 9,571 people. For electric service in Smith County, records list Oncor Electric Delivery Company, Southwestern Electric Power, Cherokee County Electric Cooperative Association, Upshur Rural Electric Cooperative and Wood County Electric Cooperative. Those reports do not identify the provider at every Whitehouse address. Before planning an electric conduit bore near Texas State Highway 110, we confirm which utility owns the line and its conduit requirements.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Whitehouse | Public water system | Surface water bought from another system | 3,300 connections, 9,571 people served |
| Oncor Electric Delivery Company, Southwestern Electric Power, Cherokee County Electric Cooperative Association, Upshur Rural Electric Cooperative and Wood County Electric Cooperative | Electric utilities reporting service in Smith County | EIA Form 861 | Confirm the line owner by address |
We consider Whitehouse’s 1992 median housing year when planning underground work, while checking actual conditions at each boring location. For underground planning in Whitehouse, we consider estimates that 7 percent of homes predate 1960, 63 percent date from 1960 to 1999, and 30 percent date from 2000 or later. A replacement bore near Hagan Road may encounter older buried services beside newer connections, so we hydrovac pothole each marked utility on the route before drilling near it. If a line is marked beneath Willingham Road, paint shows its location, not its depth, and excavation confirms the clearance.

What is near Whitehouse and how far is Tyler?
Whitehouse is an incorporated city in Smith County, at an elevation of 454 feet and covering 5.5 square miles. We use ZIP code 75791, which serves Whitehouse, to identify service locations for underground boring work. New Chapel Hill is 6.2 miles northeast; Troup and Bullard are each 7.8 miles away, southeast and southwest respectively. Tyler, the county seat and nearest larger city, is 8.3 miles northwest. From our Yukon yard, Whitehouse is 325 road miles and a 6.4 hour drive, so distance is part of planning crew mobilization for a Texas State Highway 110 project. We also take work in nearby communities and rural areas.
Places near Whitehouse
- Directional boring in New Chapel Hill: 6.2 miles northeast
- Directional boring in Troup: 7.8 miles southeast
- Directional boring in Bullard: 7.8 miles southwest
- Directional boring in Tyler: 8.3 miles northwest
- Directional boring in Arp: 9.8 miles east
Which jobs call for a bore under Whitehouse Hagan Road?
- Water service: A connection from the City of Whitehouse system can be bored beneath Willingham Road when the route and existing utilities allow.
- Highway crossing: A utility route beneath Texas State Highway 110 needs a plan that fits TxDOT right of way review and pavement conditions.
- Fiber drop: A fiber conduit route along Main Street can pass below pavement, with marked utilities exposed before drilling near them.
- Creek crossing: A bore near Blackhawk Creek needs depth and pit planning that account for the mapped channel and flood prone soils.
- Rail crossing: A route crossing either Union Pacific segment needs coordination with the railroad owner, including the line shown as out of service.
- Replacement service: A bore near Hagan Road can replace an older buried connection while limiting cuts to the street surface.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What affects a Whitehouse quote near Union Pacific (line shown as out of service)?
For a Whitehouse quote, send the address or map pin, what will go underground, the pipe or conduit size and the footage; a sketch or plans help. A route near the Union Pacific track shown as out of service still needs its exact crossing point identified. That lets us assess the line route, access for pits and whether the plan approaches another mapped crossing.
The 325 road miles from Yukon affect mobilization for a Whitehouse job. Redsprings soil and the clay mapped at about 40 inches can affect drilling time and reaming. A route under Main Street or Texas State Highway 110 brings pavement and crossing requirements into the scope, while Union Pacific track or Blackhawk Creek can add coordination and planning. Pipe size, bore length, exposed utilities, concrete, drainage crossings, pits, excavator time, sand backfill and emergency or high profile work also shape the job.
Questions people ask about boring in Whitehouse
Does Trinity Boring Solutions take directional boring work in Whitehouse and Smith County?
Yes. Trinity Boring Solutions takes directional boring work across Texas, including Whitehouse and Smith County. We handle planning and communication from the first call through the bore log, whether our own crews or a vetted partner contractor is on the route. A Main Street crossing can be assessed from its proposed path, utility marks and access for pits.
Who runs Whitehouse water service and where does the City of Whitehouse get water?
Because the City of Whitehouse owns the public water system and uses purchased surface water, we account for utility coordination before underground work. Records list 3,300 service connections and 9,571 people served. For a proposed bore near FM 346, confirm that the system owns the line at that address and identify its location before setting the drill path.
Which electric company owns a Whitehouse line in Smith County, and who confirms conduit specs?
The specific electric line owner must be confirmed for the Whitehouse address before a conduit bore is planned. Smith County electric service reports list Oncor Electric Delivery Company, Southwestern Electric Power and several cooperatives, but do not establish which provider serves each address. For a route near Texas State Highway 110, the line owner confirms conduit requirements.
Does Whitehouse or the county control Willingham Road, and does it need to be cut?
Whitehouse is incorporated, so Willingham Road is a city street. A directional bore can often pass beneath a street without cutting its pavement, with pits set on either side if access permits. The route still has to account for marked lines, pavement and available space along the 1.21 miles of Willingham Road inside the city.
How old are buried lines near Whitehouse Hagan Road, and what does that mean for replacement bores?
Whitehouse housing has a median year built of 1992 in the American Community Survey 2019 to 2023 estimates. Homes from different eras near Hagan Road may have different buried service layouts, but house age does not establish a line’s age. We locate and pothole marked utilities before drilling near them so replacement routes can be checked against actual depths.
Are groundwater or flood prone pits a concern for Whitehouse bores near Blackhawk Creek?
They can be. The USDA soil survey maps a seasonal water table within 60 inches across 30 percent of Whitehouse and flood prone soils across 7 percent. Near Blackhawk Creek, wet pits may need pumping and the bore plan should account for the channel. Creek crossing plans are also checked for U.S. Army Corps of Engineers jurisdiction.
Does Trinity cover New Chapel Hill and rural sites outside Whitehouse?
Yes. We take Texas work beyond Whitehouse, including New Chapel Hill, which is 6.2 miles northeast, and rural routes outside the city limits. The address and proposed path help us assess mobilization from Yukon and identify local crossings such as Blackhawk Creek or Texas State Highway 110.
How early should I call Texas811 for a Whitehouse bore along Main Street?
Request a Texas811 locate at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work begins. For a Main Street bore, describe the route clearly. If the start slips more than 14 days beyond the original notice, submit a new request; worn or moved marks must be refreshed through Texas811 before work continues.
What changes the cost of a Whitehouse bore near Texas State Highway 110?
The route and work scope determine the price, not just footage. A bore near Texas State Highway 110 may involve pavement and TxDOT review; clay mapped beneath Whitehouse can affect drilling time. Pipe size, length, exposed utilities, creek or drainage crossings, pits, equipment time, backfill and the 325 road miles from Yukon can also change the job requirements.
Where the Whitehouse facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Whitehouse
- U.S. Census Bureau, TIGER/Line 2024: Whitehouse boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Whitehouse
- U.S. Census Bureau, American Community Survey 2019 to 2023: Whitehouse housing units and year built
- Macrostrat geologic map compilation: map units under Whitehouse
- U.S. EPA Safe Drinking Water Information System: public water systems serving Whitehouse
- U.S. Department of Transportation, North American Rail Network: track owners in Smith County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Smith County
- U.S. Geological Survey, Elevation Point Query Service: Whitehouse elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Whitehouse
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Whitehouse
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Whitehouse, Texas
Type the address of your job in Whitehouse. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Whitehouse
Same county: Lindale · Hideaway · Emerald Bay · Noonday · Winona · Overton. All counties: Texas county list.
