trinityboringsolutions.com

Talty Texas Directional Boring: Houston Black Clay, Interstate 20, Buffalo Creek

Quick Answer: Need a line beneath Interstate 20 without cutting pavement? We do directional boring, also called horizontal directional drilling (HDD), for Talty crossings there. Our Yukon, Oklahoma main office is 243 road miles from Talty, where Alamosa Drive runs 1.69 miles within town. Houston Black soil is heavy clay that can cling to the reamer and grip pipe. Buffalo Creek is 0.1 miles from the town limits, so a creek route needs its own crossing plan.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Talty bores at a glance

  • Incorporated city in Kaufman County, Texas. Population 3,198 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 243 miles, about 4.8 hours of driving.
  • Ground: Houston Black soil is mapped on 78 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 1 percent of the area.
  • Highways inside the boundary: Interstate 20, FM 1641, FM 148 and FM 2932. State permit office: TxDOT Dallas District.
  • Railroad track inside the boundary: none mapped.
  • Public water: Talty Special Utility District, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring in Talty near Buffalo Creek?

Need a utility route beneath an Alamosa Drive pavement section or near Interstate 20 without open cutting? We take directional boring work in Talty, an incorporated town in Kaufman County with 3,198 residents in the Census Bureau Vintage 2024 estimate. We install water, sewer, gas, electric conduit and fiber, with the route planned for the specific street, property and line.

Our main office is in Yukon, Oklahoma, and Talty work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business started in 1965, and directional boring has been our trade since 1982. Four decades of boring shape how we plan around Talty’s Houston Black clay, which can cling to a reamer and grip pipe.

Aerial view of Trinity Boring Solutions crew and service van at a multifamily apartment underground utility jobsite in Oklahoma City
Our crew and service van at a multifamily underground utility job in Oklahoma City, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What is Talty ground like in Houston Black soil?

The USDA soil survey maps Houston Black across 78% of Talty, with Heiden on 14% and Wilson on 4%. Houston Black clay, on 1 to 3 percent slopes, covers 55% of the mapped area, while the 0 to 1 percent slopes unit covers 23%. Surface texture is clay across 96% of the town, and at about 40 inches the mapped texture is clay throughout, with an average clay content of 53%. Our mapped Houston Black, Heiden, and Wilson soil patterns guide planning, but they are not test borings for work in Talty. Heavy clay can ball up on a reamer, swell and grip pipe, so the bore needs a controlled fluid plan.

USDA soil survey, inside the Talty city limitsWhat is mapped
Soil series mappedHouston Black 78 percent, Heiden 14 percent and Wilson 4 percent
Texture at the surfaceclay 96 percent and silt loam 3 percent
Texture about 40 inches downclay 100 percent
Engineering class about 40 inches downfat clay (CH) 98 percent
Average clay content about 40 inches down53 percent
Bedrock mapped within 60 inches1 percent of the area (0 percent hard rock, 1 percent weathered rock)
Seasonal water table within 60 inches2 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel100 percent of the area

The USDA soil survey maps high steel corrosion risk across 100% of Talty, a concern for uncoated casing or tracer wire; HDPE does not have the same soil corrosion concern. Weathered bedrock is mapped in 1% of the area within 60 inches, with typical depth listed as 45 inches, so bedrock is not mapped across the top five feet. Seasonal water tables within 60 inches affect 2% of the area, and flood prone soils are not mapped. The geologic map names Neylandville and Marlbrook Marls, undivided, of Late Cretaceous age, with dominantly montmorillonitic clay. That ground calls for watching returns and keeping pressure from lifting pavement.

How do we run a bore through Talty clay?

Houston Black clay covers much of Talty, so we plan for sticky cuttings and a hole that can grip the pipe. Alamosa Drive routes also need utility exposure before drilling near marked lines.

  1. Houston Black clay can ball up on the reamer, so we use a thinner fluid mix with polymer and open the hole in stages.
  2. Because heavy clay is mapped throughout the ground at about 40 inches, we watch fluid returns to avoid pressure lifting pavement on Alamosa Drive.
  3. We expose each marked utility on a Talty bore path with hydrovac before the drill approaches it; paint near Douglas Circle shows position, not depth.
  4. A walkover locator tracks the drill head along routes such as FM 1641, while we log its depth and pitch as the bore advances.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

What does a bore have to cross in Talty near Alamosa Drive?

Interstate 20 has 4.6 mapped roadway miles inside Talty, while FM 1641 has 2.3 miles, FM 148 has 1.4 miles and FM 2932 has 0.7 miles. A bore below existing highway pavement is installed by boring or tunneling, rather than open trenching through the roadway. Alamosa Drive is the longest named street at 1.69 miles in town; Douglas Circle runs 0.96 miles and Oaklawn Drive runs 0.89 miles. Those streets give a route planner specific pavement and access conditions to check.

CrossingTypeMapped extentWho has a say
Interstate 20Interstate4.6 roadway miles insideState highway office
FM 1641State highway2.3 roadway miles insideState highway office
FM 148State highway1.4 roadway miles insideState highway office
FM 2932State highway0.7 roadway miles insideState highway office
Buffalo CreekStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Big Brushy CreekStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Terry CreekStream nearby1 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Talty or within 1 mile outside its limits, and no street and rail crossing is mapped in town. Buffalo Creek is 0.1 miles from the boundary, Big Brushy Creek is 0.4 miles away and Terry Creek is 1.0 miles away. None of those named streams is mapped as crossing a Talty street. Near Buffalo Creek, we distinguish the creek from mapped lakes and ponds; none are mapped within 1 mile of Talty. A route near Buffalo Creek still needs its own channel review during planning.

Who approves a Talty bore in Kaufman County?

Talty is incorporated, so its city streets belong to the city itself; Interstate 20 and FM 1641, FM 148 and FM 2932 are state highways. For work in their right of way, the line owner files the TxDOT utility permit through RULIS, not the driller. We give the owner the bore plan and profile, and the TxDOT Dallas District reviews the application. TxDOT cover rules call for 60 inches at highway crossings for electric, communication and water lines, and 60 inches for pressurized sewer crossings. Along the right of way, electric and communication need 48 inches of cover and water needs 36 inches. The permit can set another depth. A Buffalo Creek route is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried in Talty near Talty Special Utility District?

Talty Special Utility District provides public water from purchased surface water. Its records list 5,329 service connections and 15,987 people served, so a proposed water route needs to be checked against the district’s existing system. Oncor Electric Delivery Company, Farmers Electric Cooperative and Trinity Valley Electric Cooperative report electric service in Kaufman County. The electric line owner at the specific address is confirmed before planning a conduit bore; the county list does not identify the provider at every Talty property.

Line ownerWhat it isSourceSize
Talty Special Utility DistrictPublic water systemSurface water bought from another system5,329 connections, 15,987 people served
Oncor Electric Delivery Company, Farmers Electric Cooperative and Trinity Valley Electric CooperativeElectric utilities reporting service in Kaufman CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

Talty’s median housing year is 2004 in the American Community Survey 2019 to 2023 five year estimates, useful context for underground planning. The survey estimates 4% of housing was built before 1960, 29% from 1960 to 1999 and 67% in 2000 or later. That mix can mean either a replacement line or a new service, including near Douglas Circle. We hydrovac expose marked utilities on the bore path before drilling close to them, since locate paint shows position, not depth.

Trinity Boring Solutions technician hydrovac daylighting along a commercial curbline during utility locating in Oklahoma City
Hydrovac daylighting along a commercial curb line in Oklahoma City to find the utilities before a bore.

Do you cover Talty and nearby Forney?

Talty is an incorporated town in Kaufman County, covers 3.39 square miles and sits at an elevation of 478 feet. Talty’s ZIP codes are 75126 and 75160; we verify the address before planning a directional boring route near Interstate 20. Heartland is 3.5 miles southwest, Forney is 4.5 miles northwest and Crandall is 4.5 miles southwest; Terrell is 6.4 miles east. Heartland is the nearest larger place listed, while Kaufman, the county seat, is 9.6 miles southeast. From our Yukon, Oklahoma main office, Talty is 243 road miles and a 4.8 hour drive, which affects mobilization planning.

Places near Talty

What would we bore near Talty’s Douglas Circle?

  • Highway crossing: A bore beneath Interstate 20 can keep a utility route out of the paved surface, with the plan set for the highway crossing.
  • Water service: A new line near Talty Special Utility District infrastructure needs a route checked against the district’s existing water system.
  • Fiber route: Fiber conduit along Alamosa Drive can be installed below pavement, with marked utilities exposed before the drill approaches them.
  • Street replacement: A replacement sewer line near Douglas Circle can follow a planned bore route instead of an open cut across the street.
  • Creek route: A crossing near Buffalo Creek needs channel conditions reviewed and U.S. Army Corps of Engineers jurisdiction checked during planning.
  • Electric conduit: A conduit route near FM 148 starts with confirming the electric line owner for the specific address.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Talty quote near Interstate 20?

Start with where: an address or map pin near Alamosa Drive or Interstate 20. Next, tell us what goes in the ground, such as a water line near Talty Special Utility District infrastructure. Give us the pipe or conduit size and the footage. A sketch or plans showing the route and nearby streets help us work out the crossings.

A short, small conduit route on a clear part of Alamosa Drive may be simpler to plan than a longer bore under Interstate 20. Length and pipe size matter, as do Houston Black clay, marked utilities that need exposure, and concrete or pavement along the route. Buffalo Creek or drainage crossings can add planning and pit work. Excavator time and sand backfill also affect the job. Talty’s 243 road miles from Yukon can affect mobilization, and high profile or emergency work changes the scope.

Questions people ask about boring in Talty

Does Trinity Boring Solutions take directional boring jobs in Talty and Kaufman County?

Yes. For routes crossing FM 1641, we take directional boring work in Talty and across Texas. You work with Trinity from the first call through the bore log, whether our own crew or a vetted partner contractor is on site. Our Yukon office coordinates the work, including routes near Interstate 20 and Alamosa Drive.

Who runs Talty’s water system, and where does its water come from?

Talty Special Utility District runs the public water system, and its source is purchased surface water. The district lists 5,329 service connections serving 15,987 people. If a proposed line is near FM 1641 or another Talty route, its location needs to be considered against the district’s buried system.

Which electric utilities report service in Talty and Kaufman County, and who confirms conduit specs?

Oncor Electric Delivery Company, Farmers Electric Cooperative and Trinity Valley Electric Cooperative report electric service in Kaufman County. That does not identify the provider for every Talty address. We confirm the line owner for the specific location before planning an electric conduit bore, including a route near Oaklawn Drive.

Who controls Talty streets such as Oaklawn Drive, and can a bore avoid cutting one?

Because Talty is incorporated, we coordinate boring work on Alamosa Drive with the city responsible for its streets. Directional boring can place a line below an Oaklawn Drive pavement section without opening a trench through the surface. The route still needs a site plan and utility exposure where marked lines are near the bore path.

How old are Talty’s buried lines near Douglas Circle, and what does that mean for replacement bores?

The American Community Survey 2019 to 2023 estimates put Talty’s median housing year at 2004, with 67% of housing built in 2000 or later. That does not date each buried line, so a Douglas Circle project may be a replacement or a new service. Before drilling near marked utilities on Douglas Circle, we expose them to verify their position and protect the planned bore.

Does Houston Black soil in Talty corrode steel, and what pipe should I use?

The USDA soil survey maps high steel corrosion risk across 100% of Talty, including much of the Houston Black clay area. The line owner selects materials and any coating for steel casing or tracer wire. HDPE does not share the soil corrosion concern, but the pipe choice depends on the project.

How far is Talty from Yukon, and does nearby Heartland change the job?

From our Yukon, Oklahoma main office, Talty is 243 road miles and a 4.8 hour drive; we plan mobilization around that distance. Heartland is 3.5 miles southwest of Talty, but the job location and scope still determine mobilization. A route near Heartland or within Talty is priced around its length, ground, crossings and access.

How much notice does Texas811 need for a Talty bore near Alamosa Drive?

Texas811 needs a locate request at least 48 hours before excavation, not counting Saturdays, Sundays and legal holidays, and no earlier than 14 days before the start. If an Alamosa Drive job slips more than 14 days past the original notice, submit a new request. When utility marks are worn or moved along FM 148 in Kaufman County, we have them refreshed through Texas811 before work continues.

What affects the cost of directional boring in Talty near Interstate 20?

The route length and pipe or conduit size matter, along with Houston Black clay, utilities to expose, pavement, pits and equipment time. A bore under or near Interstate 20 may need a more involved crossing plan than a short street route. Buffalo Creek crossings and mobilization from Yukon can also affect the job scope.

Where the Talty facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Talty

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Talty, Texas

Type the address of your job in Talty. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Talty

Same county: Kaufman · Mabank · Travis Ranch · Combine · Oak Ridge · Kemp · Scurry · Oak Grove · Elmo · Poetry · Grays Prairie · Rosser. All counties: Texas county list.