Post Oak Bend Texas Directional Boring: Lufkin Soil, FM 987 and Little Brushy Creek
Quick Answer: FM 987 is the main route through Post Oak Bend, and we do directional boring, also called horizontal directional drilling (HDD), for routes that need to pass beneath it. The Yukon, Oklahoma main office is 250 road miles from Oak Bend Drive, which affects crew mobilization. Lufkin soil is common here, and clay at about 40 inches can grip the pipe. We use staged reaming and manage drilling fluid to keep the bore controlled.
Post Oak Bend bores at a glance
- Incorporated city in Kaufman County, Texas. Population 943 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 250 miles, about 5 hours of driving.
- Ground: Lufkin soil is mapped on 35 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 29 percent of the area.
- Highways inside the boundary: FM 987. State permit office: TxDOT Dallas District.
- Railroad track inside the boundary: none mapped.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Does anyone do directional boring along FM 987 in Post Oak Bend?
FM 987 is the main route through Post Oak Bend, and a service bore may need to pass beneath it or reach a property off it. We take directional boring work in this incorporated Kaufman County city, whose Census Bureau Vintage 2024 estimate is 943 people. Water, sewer, gas, electric conduit and fiber can follow routes along Oak Bend Drive or Kandy Lane.
Our main office is in Yukon, Oklahoma, and Post Oak Bend work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For a short service connection near Kandy Lane, our range starts with 3/4 inch lines and extends to 48 inch casing, with bores from 10 feet to 5,000 feet. Our family business began in 1965, and we have done directional boring since 1982; Post Oak Bend is 250 road miles from our Yukon main office.

How does Lufkin soil affect a bore in Post Oak Bend?
The USDA soil survey maps Lufkin series across 35% of Post Oak Bend and Crockett across 29%. Lufkin Rader complex is the leading map unit. Fine sandy loam covers 93% of the mapped surface, but the picture changes below it: at about 40 inches, the survey maps clay across 96% of the area, with an average clay content of 42%. We use mapped Lufkin, Crockett, Mabank, and Axtell soil patterns as planning context, not as substitutes for test borings. That deep clay can cling to a reamer and tighten around a pipe, so the drilling plan needs to account for sticky returns.
| USDA soil survey, inside the Post Oak Bend city limits | What is mapped |
|---|---|
| Soil series mapped | Lufkin 35 percent, Crockett 29 percent, Mabank 20 percent, Axtell 9 percent and Wilson 4 percent |
| Texture at the surface | fine sandy loam 93 percent, clay loam 3 percent and silt loam 3 percent |
| Texture about 40 inches down | clay 96 percent and clay loam 3 percent |
| Engineering class about 40 inches down | fat clay (CH) 72 percent and lean clay (CL) 28 percent |
| Average clay content about 40 inches down | 42 percent |
| Bedrock mapped within 60 inches | 29 percent of the area (0 percent hard rock, 29 percent weathered rock) |
| Seasonal water table within 60 inches | 1 percent of the area |
| Flood prone soils | 2 percent of the area |
| High corrosion risk for uncoated steel | 64 percent of the area |
The soil survey maps weathered bedrock within 60 inches in 29% of Post Oak Bend, with typical bedrock depth at 53 inches; hard bedrock is not mapped within that depth. A seasonal water table within 60 inches covers 1%, and flood prone soils cover 2%, so neither condition defines most routes. High steel corrosion risk is mapped across 64%, which matters when specifying steel casing or tracer wire. The geologic map includes Quartz Sand Decomposition Residuum of Cenozoic age, described as sand that can grade into sandstone or claystone.
How do we plan directional boring through clay near FM 987 in Post Oak Bend?
At about 40 inches, clay is mapped under most of Post Oak Bend. We plan the bore around that sticky layer, the route along FM 987 or a local street, and the marked utilities in the path.
- We review the route near FM 987 and plans, then use Texas811 to locate utilities before work starts. Marks show position, so we expose each marked line with hydrovac potholing.
- With Lufkin soil and clay mapped at about 40 inches, we use a thinner drilling fluid with polymer and ream in stages to control sticky cuttings.
- Clay can swell around a pipe and hold the reamer, so we arrange the pipe before the final ream and pull it through the open hole the same day.
- We track the drill head from the surface and log depth and pitch near Oak Bend Drive, while watching fluid returns to avoid lifting pavement.

What does a bore have to cross on Oak Bend Drive in Post Oak Bend?
FM 987 runs through Post Oak Bend, with 2.8 mapped roadway miles inside the city limits. Texas State Highway 243 is 1.4 miles outside the limits, and US 175 is 1.5 miles away. Inside town, Oak Bend Drive is the longest named street at 0.67 miles, followed by Kandy Lane at 0.65 miles and Kings Creek Drive at 0.48 miles. A bore route along these streets can avoid cutting pavement, but FM 987 work in state right of way needs TxDOT review.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 987 | State highway | 2.8 roadway miles inside | State highway office |
| Texas State Highway 243 | Highway nearby | 1.4 miles outside | State highway office |
| US 175 | Highway nearby | 1.5 miles outside | State highway office |
| Little Brushy Creek | Stream nearby | 0.3 miles outside | Checked for Corps of Engineers jurisdiction |
| Kings Creek | Stream nearby | 0.4 miles outside | Checked for Corps of Engineers jurisdiction |
| Kaufman Branch | Stream nearby | 0.8 miles outside | Checked for Corps of Engineers jurisdiction |
| Eagans Branch | Stream nearby | 1 miles outside | Checked for Corps of Engineers jurisdiction |
Public mapping shows no railroad inside Post Oak Bend or within one mile, and no mapped street and rail crossings inside the city. No stream runs through the limits. Little Brushy Creek is 0.3 miles from the city limits, Kings Creek is 0.4 miles away, Kaufman Branch is 0.8 miles away, and Eagans Branch is 1.0 mile away. No mapped street crossing of a named stream appears inside the city, so a creek crossing would depend on the route beyond town.
Whose permission does a bore need in Kaufman County and Post Oak Bend?
Because Post Oak Bend is incorporated in Kaufman County, we treat Oak Bend Drive as a city street for boring coordination. FM 987 is a state highway, and a utility owner seeking work in its right of way files the TxDOT utility application through RULIS. We prepare the bore plan and profile for that owner, and the TxDOT Dallas District reviews the application. For highway crossings, TxDOT rules set cover at 60 inches for electric, communication and water lines; electric and communication lines running along the right of way need 48 inches, and water lines need 36 inches. A Little Brushy Creek route is checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What is already in the ground in Kaufman County and Post Oak Bend?
The provider for a specific Post Oak Bend address has to be confirmed with the city, Kaufman County or the local water district before a bore is planned. EPA drinking water records do not let us match a water system to this town by name. Oncor Electric Delivery Company, Farmers Electric Cooperative and Trinity Valley Electric Cooperative report service in Kaufman County, but the line owner must be confirmed before a conduit bore. That check matters on a route from FM 987 to a local property.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Oncor Electric Delivery Company, Farmers Electric Cooperative and Trinity Valley Electric Cooperative | Electric utilities reporting service in Kaufman County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 estimates put the median housing year in Post Oak Bend at 2002; 1% of homes were built before 1960 and 58% in 2000 or later. A bore near Kandy Lane could serve a newer connection or replace an older line, so the address and plans matter. Before drilling near any marked utility, we expose it with hydrovac potholing. Paint shows a line’s position, not its depth.

Do you cover Post Oak Bend and nearby Oak Ridge?
Post Oak Bend is in Kaufman County, at an elevation of 455 feet, and covers 2.07 square miles. Oak Ridge is 3.1 miles east, while Kaufman is 3.9 miles south and is the county seat. Talty is 6.3 miles northwest, Crandall is 6.5 miles west, and Terrell is 6.5 miles north. The Yukon, Oklahoma main office is 250 road miles away, a 5.0 hour drive. Those miles affect mobilization for work along FM 987 or the local streets.
Places near Post Oak Bend
- Directional boring in Oak Ridge: 3.1 miles east
- Directional boring in Kaufman: 3.9 miles south
- Directional boring in Talty: 6.3 miles northwest
- Directional boring in Crandall: 6.5 miles west
- Directional boring in Terrell: 6.5 miles north
What kinds of bores come up near Little Brushy Creek in Post Oak Bend?
- Highway crossing: A utility route under FM 987 needs a bore plan for TxDOT review and cover set for the line type.
- Water service: A connection near Kandy Lane needs the provider for that address confirmed before we plan the bore.
- Fiber conduit: A route along Oak Bend Drive can carry conduit beneath pavement without opening a trench through the street.
- Creek crossing: A route toward Little Brushy Creek needs channel depth planning and a check for Corps jurisdiction.
- Street service: A line near Kings Creek Drive can be bored from dirt pits on each side of the route.
- Acreage service: A longer run near Klassik K Farm can use a bore sized to the pipe and the available route.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for work near Klassik K Farm in Post Oak Bend?
For a route near Klassik K Farm, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help. Those details show whether the job is a short service line or a longer route near FM 987, and let us plan access and the bore path.
A clear route along a local street with no marked crossings is simpler to plan than a bore through the clay mapped at 40 inches. Length, pipe size, soil and rock, utility crossings, pavement, pits and creek or drainage crossings all affect the scope. Work under FM 987 adds state right of way planning, and mobilization reflects the 250 road miles from Yukon. We review those details together before setting the job price.
Questions people ask about boring in Post Oak Bend
Does Trinity Boring Solutions take jobs in Post Oak Bend, Kaufman County, and who does the work?
Yes. We take directional boring jobs in Post Oak Bend, and the crew may be our own or one working from a partner contractor’s satellite yard that Trinity has vetted. Our Yukon, Oklahoma main office coordinates the job from the first call through the bore log. FM 987 is one local route we can assess.
Can you bore under Little Brushy Creek near Post Oak Bend?
A bore under Little Brushy Creek can be considered if the route and ground support it. The creek is 0.3 miles from the Post Oak Bend limits, so a crossing would be outside town. We plan depth beneath the channel and check during planning whether the crossing is under U.S. Army Corps of Engineers jurisdiction.
Which electric company owns a line in Post Oak Bend, Kaufman County, and who confirms conduit specs?
The specific line owner needs to be identified for the address before a conduit bore is planned. Oncor Electric Delivery Company, Farmers Electric Cooperative and Trinity Valley Electric Cooperative report service in Kaufman County, but that does not identify the provider at every Post Oak Bend address. Confirm conduit requirements with the owner of the line near FM 987.
Who controls Kings Creek Drive in Post Oak Bend, and does a bore require cutting it?
Kings Creek Drive is a city street because Post Oak Bend is incorporated. Directional boring can place a line beneath the street without cutting the pavement, with pits on the dirt at each end. The route still needs to account for marked utilities and the specific street conditions.
How old are buried lines near Kandy Lane in Post Oak Bend, and can they be replaced by boring?
The American Community Survey 2019 to 2023 estimates place the median housing year at 2002, with 1% of homes built before 1960 and 58% built in 2000 or later. Those figures describe housing, not buried line age. A replacement bore near Kandy Lane is planned from the actual route, existing records and exposed utilities.
Does Lufkin soil in Post Oak Bend corrode steel, and what pipe can be used?
The USDA soil survey maps high steel corrosion risk across 64% of Post Oak Bend, so the line owner should consider steel casing and tracer wire materials. Lufkin soil is mapped across 35% of the city. HDPE is not affected by that soil corrosion concern; the line owner selects any coating for steel.
How much Texas811 notice does a bore along Oak Bend Drive in Post Oak Bend need, and what if marks move?
For a bore along Oak Bend Drive, request a Texas811 locate at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. For work near Kaufman, if the start slips more than 14 days past the original notice, we submit a new request. On Kandy Lane, we refresh marks that wear off or move through Texas811 before continuing work.
How far is Post Oak Bend from Kaufman and Trinity’s Yukon, Oklahoma main office?
Post Oak Bend is 3.9 miles north of Kaufman, while the Yukon main office is 250 road miles from town and a 5.0 hour drive. That distance can affect mobilization for a bore near FM 987. We use the address, route length and equipment needs to plan the trip.
What affects the cost of directional boring under FM 987 in Post Oak Bend?
The route length, pipe or conduit size, Lufkin soil and any weathered bedrock can change the work. Utility crossings, pavement, pits and drainage crossings also affect planning. A bore under FM 987 involves state highway right of way requirements, and mobilization from Yukon reflects the 250 road miles. The job details determine the price.
Where the Post Oak Bend facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Post Oak Bend
- U.S. Census Bureau, TIGER/Line 2024: Post Oak Bend boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Post Oak Bend
- U.S. Census Bureau, American Community Survey 2019 to 2023: Post Oak Bend housing units and year built
- Macrostrat geologic map compilation: map units under Post Oak Bend
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Kaufman County
- U.S. Geological Survey, Elevation Point Query Service: Post Oak Bend elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Post Oak Bend
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Post Oak Bend
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Post Oak Bend, Texas
Type the address of your job in Post Oak Bend. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Post Oak Bend
Same county: Forney · Mabank · Travis Ranch · Combine · Kemp · Scurry · Oak Grove · Elmo · Poetry · Grays Prairie · Rosser · Cottonwood. All counties: Texas county list.
