trinityboringsolutions.com

Terrell Texas Directional Boring: Wilson Silt Loam, Bachelor Creek And Union Pacific

Quick Answer: Can a line pass beneath Interstate 20, Union Pacific track or Bachelor Creek without cutting the surface? Yes, Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Terrell, Texas, for those crossings. The Yukon main office is 249 road miles away, and Terrell’s 17.05 Union Pacific track miles can shape access and coordination. The USDA soil survey maps 90 percent of the area as heavy clay at 40 inches, so sticky cuttings and fluid pressure need close control.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Terrell bores at a glance

  • Incorporated city in Kaufman County, Texas. Population 22,977 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 249 miles, about 4.9 hours of driving.
  • Ground: Wilson soil is mapped on 32 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 16 percent of the area.
  • Highways inside the boundary: Interstate 20, US 80, Texas State Highway 34, Spur 557 and FM 148. State permit office: TxDOT Dallas District.
  • Railroad track inside the boundary: Union Pacific, with 32 mapped street and rail crossings.
  • Named streams inside the boundary: Bachelor Creek, Kings Creek, Little Brushy Creek and Terry Creek.
  • Public water: City of Terrell, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles Terrell bores near Bachelor Creek?

Can a line pass beneath Moore Avenue, Union Pacific track or Bachelor Creek without opening the surface? We plan directional bores for routes like these in Terrell, Kaufman County. The Census Bureau Vintage 2024 estimate puts the population at 22,977. Our crews install water, sewer, gas, electric conduit and fiber where those lines need to cross streets or drainage routes.

Our main office is in Yukon, Oklahoma, and Terrell work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For a short connection at Moore Avenue, our range runs from 3/4 inch service lines to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. Our family business began in 1965 and has done directional boring since 1982, including capacity for a major crossing near Interstate 20.

Directional drill rig and crew working on a street beside a brick commercial building
Our drill and crew set up on a street beside a brick commercial building. Photos on this page are from our jobs in Oklahoma and Texas.

What does the Terrell soil survey show about Wilson soil?

The USDA soil survey maps Wilson soil across 32 percent of Terrell, with Mabank at 14 percent and Crockett at 12 percent. Fine sandy loam covers 37 percent of the mapped surface, while clay is 22 percent. At about 40 inches, clay is mapped across 90 percent of Terrell and average clay content is 45 percent; no sandy area is mapped at that depth. These are survey patterns, not test borings, so the exact route near South Virginia Street still needs field checks.

USDA soil survey, inside the Terrell city limitsWhat is mapped
Soil series mappedWilson 32 percent, Mabank 14 percent, Crockett 12 percent, Lufkin 9 percent and Burleson 9 percent
Texture at the surfacefine sandy loam 37 percent, silt loam 26 percent and clay 22 percent
Texture about 40 inches downclay 90 percent and clay loam 5 percent
Engineering class about 40 inches downfat clay (CH) 53 percent and lean clay (CL) 44 percent
Average clay content about 40 inches down45 percent
Bedrock mapped within 60 inches16 percent of the area (0 percent hard rock, 16 percent weathered rock)
Seasonal water table within 60 inches11 percent of the area
Flood prone soils11 percent of the area
High corrosion risk for uncoated steel83 percent of the area

The USDA soil survey maps bedrock within 60 inches in 16 percent of the area, usually around 51 inches; no area is mapped within 40 inches. That points to possible slower drilling where shallow weathered rock occurs, not rock at every site. Seasonal water table and flood prone soils each cover 11 percent, so pits near Bachelor Creek may need water management and a route planned below the channel. High steel corrosion risk covers 83 percent, a concern for uncoated casing and tracer wire. Quartz Sand Decomposition Residuum, Cenozoic, and Nacatoch Sand, Maastrichtian, describe sand and sandstone units with local claystone or silty clay layers.

What does it take to bore Terrell clay?

Terrell’s clay at 40 inches can cling to the reamer and swell around a pipe. On a Moore Avenue route, we match fluid and reaming to the ground, keep returns in view and have the pipe ready before opening the final hole.

  1. Wilson silt loam and mapped clay call for controlled fluid use; we ream in stages and pull the pipe the day the final opening is made.
  2. Near Interstate 20 pavement, we keep fluid pressure low and watch returns so the ground does not lift the surface.
  3. At a Bachelor Creek crossing, we plan below the channel and account for wet pits; small pits and pumping can help manage seasonal water.
  4. Before approaching marked lines along Moore Avenue, we hydrovac expose each conflict on the bore path; a walkover locator follows the head while depth and pitch are logged.
Open bore pit in red Oklahoma dirt with white PVC conduit stub ups and an orange safety barrier
An open bore pit in red Oklahoma dirt with PVC conduit stubbed up and a safety barrier around it.

Where might a Terrell line pass under Interstate 20?

Interstate 20, US 80, Texas State Highway 34 and Spur 557 run inside Terrell; TxDOT records also list FM 148, Texas State Highway 205, FM 986, FM 1392, FM 2578, FM 429 and Spur 87. Existing highway pavement crossings are bored or tunneled rather than cut under TxDOT rules. Moore Avenue is the longest named street at 6.32 miles, followed by Frances Street at 3.64 miles and South Virginia Street at 3.22 miles, so route length and street access matter.

CrossingTypeMapped extentWho has a say
Interstate 20Interstate13.7 roadway miles insideState highway office
US 80US highway17.7 roadway miles insideState highway office
Texas State Highway 34State highway12.8 roadway miles insideState highway office
Spur 557State highway8.8 roadway miles insideState highway office
FM 148State highway8.6 roadway miles insideState highway office
Texas State Highway 205State highway4.4 roadway miles insideState highway office
FM 986State highway2.8 roadway miles insideState highway office
FM 1392State highway1.8 roadway miles insideState highway office
FM 2578State highway1.7 roadway miles insideState highway office
FM 429State highway1.5 roadway miles insideState highway office
Spur 87State highway0.3 roadway miles insideState highway office
Union PacificRailroad17.05 track miles insideThe railroad
Bachelor CreekStream8.56 channel miles insideChecked for Corps of Engineers jurisdiction
Kings CreekStream5.78 channel miles insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 17.05 track miles inside Terrell on its Mineola Subdivision, and public mapping shows 32 street and rail crossings in the city. Bachelor Creek runs 8.56 channel miles; Kings Creek adds 5.78, and Terrell has 40 mapped street crossings of named streams. New Terrell City Lake and Old Terrell City Lake are also within city limits. Each track, creek or lake route changes the crossing plan and access.

Who approves a Terrell bore near Union Pacific track?

Terrell is incorporated, so Moore Avenue and other city streets are under city authority; we plan bores to avoid cutting pavement. For Interstate 20, US 80, Texas State Highway 34 and farm to market routes, the line owner, not Trinity, applies through TxDOT’s RULIS system, reviewed by TxDOT Dallas District. We prepare the bore plan and profile for that filing. State highway cover is 60 inches for electric and communication lines and water crossings, and 60 inches for pressurized sewer crossings; along right of way, electric and communication lines need 48 inches and water lines 36 inches. A Union Pacific crossing needs an agreement with the railroad, and a Bachelor Creek route is checked for Corps jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground near the City of Terrell system?

The City of Terrell public water system uses purchased surface water and reports 20,730 service connections serving 18,432 people. That gives a water service bore a known system owner to coordinate with, but the route and line still need confirmation at the address. In Kaufman County, Oncor Electric Delivery Company, Farmers Electric Cooperative and Trinity Valley Electric Cooperative report electric service. The line owner for an address near Interstate 20 must be confirmed before planning an electric conduit bore.

Line ownerWhat it isSourceSize
City of TerrellPublic water systemSurface water bought from another system20,730 connections, 18,432 people served
Oncor Electric Delivery Company, Farmers Electric Cooperative and Trinity Valley Electric CooperativeElectric utilities reporting service in Kaufman CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Terrell’s median housing year at 1983; 19 percent was built before 1960, 48 percent from 1960 to 1999, and 33 percent in 2000 or later. A Frances Street project could involve replacing older lines or adding a new service, so we expose marked utilities on the bore path before drilling near them. Paint shows position, not depth; hydrovac potholing helps check clearance around City of Terrell water lines and electric facilities.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

Do you cover Terrell, Talty and nearby rural routes?

Terrell is an incorporated city in Kaufman County, at 484 feet elevation and covering 33.2 square miles. The 75160 and 75161 ZIP codes cover addresses here. Talty lies 6.4 miles west, Post Oak Bend 6.5 miles south, Oak Ridge 7.1 miles south, Poetry 8.2 miles north and Elmo 8.5 miles east. Kaufman, the county seat, is 10.3 miles south; Rockwall is 15.6 miles northwest. Our Yukon yard is 249 road miles away, a 4.9 hour drive, so distance is part of planning Terrell work.

Places near Terrell

What boring work comes up along Moore Avenue in Terrell?

  • Highway crossing: A bore beneath Interstate 20 keeps a utility route below existing pavement rather than trenching through its surface.
  • Water service: A City of Terrell connection can be routed beneath Moore Avenue after the service alignment and existing lines are checked.
  • Fiber conduit: Frances Street’s 3.64 miles of mapped roadway creates a long street route where marked services may need potholing.
  • Creek crossing: At Bachelor Creek, the plan accounts for channel depth, mapped flood prone soils and possible Corps jurisdiction.
  • Rail crossing: A route beneath Union Pacific track needs a railroad agreement before casing, depth and flagging are planned.
  • Airport conduit: A proposed route at Terrell Municipal Airport can use a bore where the alignment has to pass beneath pavement.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Terrell quote near Airport Road?

For a Terrell quote near Airport Road, send the address or map pin, what will go underground, pipe or conduit size and footage; a sketch or plans help. If the route approaches Interstate 20 or Bachelor Creek, mark that on the plan too, since crossing conditions and access help us understand the alignment before we scope the bore.

A short, direct service on a clear route near Airport Road is simpler to plan than a crossing with several conflicts. Price changes with bore length, pipe or conduit size, Wilson clay, shallow weathered rock, marked utilities that need exposure, pavement, creek crossings, pits, excavator time, backfill, schedule demands and mobilization. An Interstate 20 crossing or a route under Union Pacific adds coordination, while Bachelor Creek can affect depth and fluid planning. Terrell is 249 road miles from Yukon, so distance also affects crew mobilization.

Questions people ask about boring in Terrell

Does Trinity Boring Solutions take directional boring work in Terrell, Kaufman County?

Yes. We take directional boring work across Texas, including Terrell in Kaufman County. Our Yukon main office stays involved from the first call through the bore log, while our own crews or vetted partner contractors working from satellite yards staff the site. A route under Moore Avenue or near Bachelor Creek is scoped for its specific crossings.

Can you bore beneath Bachelor Creek in Terrell?

A bore can be planned beneath Bachelor Creek without cutting across the channel, subject to the route and site conditions. The plan needs to account for depth below the creek and check for U.S. Army Corps of Engineers jurisdiction. The mapped 8.56 channel miles show why the exact crossing location matters.

Who supplies public water in Terrell, and where does it come from?

The City of Terrell owns the public water system, which uses purchased surface water. The system reports 20,730 service connections and serves 18,432 people. For a bore near Moore Avenue, confirm the water line location and the service route before choosing the crossing.

Which electric company serves my Terrell address in Kaufman County, and who confirms conduit specs?

Oncor Electric Delivery Company, Farmers Electric Cooperative and Trinity Valley Electric Cooperative report service in Kaufman County, but that does not identify the provider at every Terrell address. Confirm the line owner and conduit requirements for the specific route before planning a bore near South Virginia Street.

Does Terrell control South Virginia Street, and can a bore avoid cutting it?

Terrell is an incorporated city, so South Virginia Street is a city street. A directional bore can pass below pavement without an open cut, subject to the route and required approvals. Its 3.22 miles of roadway make the exact crossing point and existing utilities part of the plan.

What do Terrell homes near Frances Street say about old buried lines?

The American Community Survey 2019 to 2023 five year estimates put Terrell’s median housing year at 1983, with 19 percent of homes built before 1960. A Frances Street replacement may encounter older buried utilities, so marked lines on the bore path need to be exposed before drilling near them.

Does Trinity bore in Terrell, Talty and rural sites beyond city limits?

Yes. Trinity takes work across Texas, so Terrell, nearby Talty and rural routes beyond city limits are within our service area. Our Yukon main office coordinates the work and our crews or vetted partner contractors staff the job. The Talty area is 6.4 miles west of Terrell.

How early should I call Texas811 for a Moore Avenue bore in Terrell?

Paint on Moore Avenue shows a utility’s position, not its depth. Texas law requires the locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If the start slips more than 14 days past the notice, request again; have worn or moved marks refreshed through Texas811 before work continues.

What affects the cost of directional boring under Interstate 20 in Terrell?

The route and scope determine the price. A Terrell crossing under Interstate 20 may involve bore length, pipe size, pavement, utility exposures and TxDOT coordination. Wilson clay, possible weathered rock, a creek crossing, pits, excavator time and backfill can also change the work, as can mobilization from the Yukon office 249 road miles away.

Where the Terrell facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Terrell

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Terrell, Texas

Type the address of your job in Terrell. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Terrell

Same county: Forney · Kaufman · Crandall · Mabank · Travis Ranch · Combine · Kemp · Scurry · Oak Grove · Grays Prairie · Rosser · Cottonwood. All counties: Texas county list.