Olmito Texas Directional Boring: Laredo Soil, Texas State Highway 12 and Union Pacific
Quick Answer: Olmito is an unincorporated community in Cameron County, so its streets are not run by a city government; we do directional boring, also called horizontal directional drilling (HDD), for proposed crossings of Texas State Highway 12. The Yukon, Oklahoma main office is 722 road miles from Olmito, with Union Pacific track inside the community to plan around. USDA soil survey maps show Laredo soil across most of the area. Its clay and silt loam can hold a bore open, but sticky cuttings call for staged reaming and controlled drilling fluid.
Olmito bores at a glance
- Unincorporated community in Cameron County, Texas. Population 1,021 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 722 miles, about 14.1 hours of driving.
- Ground: Laredo soil is mapped on 84 percent of the area, with silt loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: Texas State Highway 12 and FM 1732. State permit office: TxDOT Pharr District.
- Railroad track inside the boundary: Union Pacific, with 5 mapped street and rail crossings.
- Named streams inside the boundary: Resaca del Rancho Viejo.
- Public water: Olmito Water Supply Corporation, surface water.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring near Texas State Highway 12 in Olmito?
Olmito is an unincorporated community in Cameron County, with no city government to own its streets. The Census Bureau counted 1,021 residents in the 2020 Census. We install water, sewer, gas, electric conduit and fiber for proposed routes along Broussard Street or crossings near Texas State Highway 12, with the line and route confirmed for each project.
Our main office is in Yukon, Oklahoma, and Olmito work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Trinity is a family business started in 1965, with directional boring work dating to 1982. We have had no utility strike in over 25 years, a record that matters around the Olmito Water Supply Corporation lines and the electric systems reported in Cameron County.

What is Olmito ground like to bore through Laredo soil?
The USDA soil survey maps Laredo soil across 84 percent of Olmito. At about 40 inches below the surface, silt loam is mapped across 63 percent and silty clay loam across 21 percent. The survey maps clay at an average of 28 percent at that depth, with 84 percent of the area classed as CL. For boring work in Olmito, we treat mapped soil patterns as planning context, not substitutes for test borings. For a bore near Lakeside Boulevard, the clay can cling to the reamer and grip pipe, while wet silt loam can soften steering or wash out if fluid pressure is too high.
| USDA soil survey, inside the Olmito mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Laredo 84 percent |
| Texture at the surface | silty clay loam 63 percent and silt loam 21 percent |
| Texture about 40 inches down | silt loam 63 percent and silty clay loam 21 percent |
| Engineering class about 40 inches down | lean clay (CL) 84 percent and fat clay (CH) 4 percent |
| Average clay content about 40 inches down | 28 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 2 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 4 percent of the area |
Bedrock is not mapped in the top five feet of Olmito, so the mapped shallow profile does not call for a rock bit; deeper conditions still need to be judged at the site. Seasonal water tables are mapped within 60 inches in 2 percent of the area, which can mean pumping a small pit near Resaca del Rancho Viejo. In Olmito, we plan boring routes knowing flood prone soils are not mapped. High steel corrosion risk is mapped in 4 percent, a consideration for casing and tracer wire. The geologic map shows Holocene silty and sandy flood plain alluvium, so local soil can vary between silt and sand.
How do crews handle Olmito silt loam and clay?
Laredo soil maps across much of Olmito, with both silty clay loam and silt loam at depth. We match fluid and reaming to the ground, then track the head as it advances near local streets and crossings.
- In Olmito Laredo clay, we use thinner fluid with polymer and ream in stages so sticky cuttings do not build up on the reamer.
- Where silt loam is mapped near Lakeside Boulevard, we keep fluid pressure low under pavement because wet ground can soften steering or wash out.
- Before drilling near a marked utility on a proposed Broussard Street route, we hydrovac pothole to expose it; paint does not show its depth.
- At Resaca del Rancho Viejo, the surface locator tracks the drill head while we log depth and pitch, keeping pits in soil instead of cutting the bank.

Which roads, tracks or creeks could a bore cross in Olmito near Union Pacific?
Texas State Highway 12 has 1.0 mapped roadway mile inside the Olmito community, and FM 1732 has 0.4. Interstate 69 Spur, Interstate 169, US 83, US 77 and Interstate 69E run along or touch the mapped boundary. A route on a local street may involve Lakeside Boulevard, the longest named street at 2.02 miles, or Broussard Street and Beddoes Road. These road and street details help set the bore path, pit locations and any pavement protection needed.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Texas State Highway 12 | State highway | 1 roadway miles inside | State highway office |
| FM 1732 | State highway | 0.4 roadway miles inside | State highway office |
| Interstate 69 Spur | Highway nearby | Runs along or touches the city limits | State highway office |
| Interstate 169 | Highway nearby | Runs along or touches the city limits | State highway office |
| US 83 | Highway nearby | Runs along or touches the city limits | State highway office |
| US 77 | Highway nearby | Runs along or touches the city limits | State highway office |
| Interstate 69E | Highway nearby | Runs along or touches the city limits | State highway office |
| Union Pacific | Railroad | 1.27 track miles inside | The railroad |
| Resaca del Rancho Viejo | Stream | 0.08 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Los Fresnos Main Supply Canal | Stream nearby | 0.1 miles outside | Checked for Corps of Engineers jurisdiction |
| Olmito Branch | Stream nearby | 0.2 miles outside | Checked for Corps of Engineers jurisdiction |
| Resaca del Rancho Viejo | Lake or pond | 164 acres, inside | Checked for Corps of Engineers jurisdiction |
| Olmito Lake | Lake or pond | 22 acres, inside | Checked for Corps of Engineers jurisdiction |
Union Pacific has 1.27 track miles inside Olmito on the Brownsville Subdivision, with 5 mapped street and rail crossings in the community. A track crossing needs an agreement from Union Pacific that sets casing, depth and flagging. Resaca del Rancho Viejo has 0.08 channel mile inside the boundary, and 1 mapped street crossing of a named stream. Resaca del Rancho Viejo and Olmito Lake are mapped lakes inside the community, so a proposed water crossing needs planning review for federal jurisdiction.
Who permits an Olmito bore in Cameron County?
Olmito has no city government, so responsibility for its streets rests with Cameron County or the state, depending on the road. For work in the right of way of Texas State Highway 12, FM 1732 or a named US or Interstate route, TxDOT requires a utility permit. The utility owner, not the drilling contractor, files through RULIS with the TxDOT Pharr District; we prepare the bore plan and profile and work under the owner’s permit. TxDOT cover rules set minimum depths by line type, including 60 inches for electric and communication lines at crossings and 48 inches along the right of way. Water lines need 60 inches at crossings and 36 inches along it. A highway bore goes beneath the existing pavement by boring or tunneling. Union Pacific requires its own crossing agreement, and a proposed Resaca del Rancho Viejo crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What is already in the ground in Olmito near Olmito Water Supply Corporation?
Olmito Water Supply Corporation is a local government owned public water system using surface water. It serves 8,952 people through 2,393 service connections, so a proposed service near Lakeside Boulevard needs its existing line located before drilling. Electric utilities reporting service in Cameron County are AEP Texas Central, Brownsville Public Utilities Board and Magic Valley Electric Cooperative. The line owner for a specific address is confirmed before planning an electric conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Olmito Water Supply Corporation | Public water system | Surface water | 2,393 connections, 8,952 people served |
| AEP Texas Central, Brownsville Public Utilities Board and Magic Valley Electric Cooperative | Electric utilities reporting service in Cameron County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Olmito’s median housing year at 1987; 20 percent of homes were built before 1960 and 41 percent in 2000 or later. That mix can mean replacement work as well as new service routes near Parker Street. Before the drill approaches any marked utility, we hydrovac pothole it because paint shows position, not depth. A proposed line beneath Parker Street is one example where the marked utility needs to be exposed first.

Do you cover Olmito and nearby Los Fresnos?
Olmito is in Cameron County, 6.0 miles west of Brownsville, the county seat. The mapped community covers 0.64 square mile, sits at 34 feet elevation and uses ZIP code 78575. Rancho Viejo is 1.1 miles northwest; San Pedro is 4.4 miles southwest; Los Fresnos is 4.6 miles northeast. Indian Lake is 4.7 miles northeast and Cameron Park is 5.5 miles southeast. From our Yukon, Oklahoma main office, the road trip is 722 miles and 14.1 drive hours, which affects mobilization for work around Texas State Highway 12.
Places near Olmito
- Directional boring in Rancho Viejo: 1.1 miles northwest
- San Pedro: 4.4 miles southwest
- Directional boring in Los Fresnos: 4.6 miles northeast
- Indian Lake: 4.7 miles northeast
- Directional boring in Cameron Park: 5.5 miles southeast
What boring work comes up near Olmito’s Broussard Street?
- Highway crossing: A proposed bore beneath Texas State Highway 12 uses a planned path below the travel lanes and avoids cutting existing pavement.
- Water service: A connection near Lakeside Boulevard needs the Olmito Water Supply Corporation line located and exposed before the drill approaches it.
- Rail crossing: A bore beneath the Union Pacific Brownsville Subdivision needs a railroad agreement covering casing, depth and flagging.
- Creek crossing: A proposed route beneath Resaca del Rancho Viejo needs depth planning and a check for U.S. Army Corps of Engineers jurisdiction.
- Fiber conduit: A route along Broussard Street can use directional boring to pass beneath pavement while pits stay in soil at each end.
- Street utility: A water or sewer line near Beddoes Road can be bored beneath the roadway after existing marked utilities are exposed.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for an Olmito quote near Parker Street?
Start with the address or map pin, such as a proposed route on Parker Street. Tell us what goes in the ground, whether it is a water line or fiber conduit, then give the pipe or conduit size and footage. A sketch or plan showing the route toward Texas State Highway 12 helps us see crossings and access before we prepare the scope.
A short route through Laredo soil with clear access is simpler to plan than one involving several exposed utilities or a crossing. Length and pipe size affect the equipment and reaming; clay and silt loam can change fluid control. A Union Pacific track, Texas State Highway 12, pavement, Resaca del Rancho Viejo, pits, excavator time and sand backfill can add work. Mobilization also reflects the 722 road miles from Yukon. High profile or emergency work changes the planning needs.
Questions people ask about boring in Olmito
Does Trinity Boring Solutions take directional boring work in Olmito and Cameron County, and who staffs it?
Yes. Trinity takes directional boring work in Olmito, and the job is handled by our own crews or crews working from satellite yards run by partner drilling contractors we have vetted. Our Yukon, Oklahoma main office coordinates the project. A proposed route near Texas State Highway 12 can be staffed without a local office in Cameron County.
What does an Olmito bore under Union Pacific track require?
A bore beneath Union Pacific’s Brownsville Subdivision needs an agreement with the railroad that owns the track. The agreement sets casing, depth and flagging for the crossing. Union Pacific has 1.27 track miles inside Olmito, and TxDOT asks for a copy of the railroad agreement when the line also occupies highway right of way.
Can a line be bored beneath Resaca del Rancho Viejo in Olmito?
A line can be planned beneath Resaca del Rancho Viejo, subject to the route and ground conditions. The creek has 0.08 channel mile inside the mapped community, and its crossing is checked during planning for U.S. Army Corps of Engineers jurisdiction. We would plan the bore depth to stay beneath the channel and keep equipment pits on land.
When planning underground work in Olmito, who runs its public water system, and where does its water come from?
Olmito Water Supply Corporation owns the public water system, which uses surface water. We consider a public water system serving 8,952 people through 2,393 service connections when planning underground work in Olmito. A proposed connection near Lakeside Boulevard needs coordination around the existing water line, with marked utilities exposed before the drill gets close.
Which electric companies report service in Olmito and Cameron County, and who confirms conduit specs?
AEP Texas Central, Brownsville Public Utilities Board and Magic Valley Electric Cooperative report electric service in Cameron County. That does not identify the provider at every Olmito address. The line owner is confirmed before planning an electric conduit bore near Texas State Highway 12, including the conduit requirements for the proposed connection.
Who controls Olmito streets such as Beddoes Road, and must a bore cut the pavement?
Olmito is an unincorporated community with no city government, so Cameron County or the state is responsible for its streets, depending on the road. A bore beneath Beddoes Road can pass below pavement without an open cut. Existing utilities along the route still need to be located and exposed before drilling nearby.
What bore sizes and lengths can Trinity handle for a job near Olmito’s Parker Street?
We handle lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. A proposed water or conduit route near Parker Street would be scoped around its size, footage, Laredo soil and any marked utility crossings. A sketch helps show the entry and exit areas.
How much notice does Texas811 need before an Olmito bore near Lakeside Boulevard, and what if marks move?
Texas law requires a locate request at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. Texas811 describes that as at least two working days. If a Lakeside Boulevard start slips more than 14 days past the original notice, request a new ticket; worn or moved marks must be refreshed through Texas811 before work continues.
What affects the cost of directional boring in Olmito near Texas State Highway 12?
The job scope sets the price: bore length and size, Laredo soil, exposed utilities, pavement, pits, creek crossings and mobilization all matter. A route beneath Texas State Highway 12 or Union Pacific track has added crossing requirements, while a simpler street route may need less planning. Distance from the Yukon office also affects mobilization.
Where the Olmito facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Olmito
- U.S. Census Bureau, TIGER/Line 2024: Olmito boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Olmito population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Olmito housing units and year built
- Macrostrat geologic map compilation: map units under Olmito
- U.S. EPA Safe Drinking Water Information System: public water systems serving Olmito
- U.S. Department of Transportation, North American Rail Network: track owners in Cameron County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Cameron County
- U.S. Geological Survey, Elevation Point Query Service: Olmito elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Olmito
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Olmito
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Olmito, Texas
Type the address of your job in Olmito. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Olmito
Same county: Brownsville · Harlingen · San Benito · La Feria · Primera · Port Isabel · Laguna Vista · Laureles · Laguna Heights · Combes · La Paloma · Santa Rosa. All counties: Texas county list.
