trinityboringsolutions.com

The Homesteads Texas Directional Boring: Heiden Clay, FM 2738 And Mountain Creek

Quick Answer: The Homesteads is an unincorporated community, so its streets are county or state roads; we do directional boring, also called horizontal directional drilling (HDD), beneath FM 2738. The Yukon, Oklahoma main office is 241 road miles away, and Marianna Way is one of the mapped routes here. Heiden clay covers much of the community and can stick to a reamer or swell around pipe. We use staged reaming and manage drilling fluid to keep the hole and nearby pavement under control.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

The Homesteads bores at a glance

  • Unincorporated community in Johnson County, Texas. Population 3,890 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 241 miles, about 4.8 hours of driving.
  • Ground: Heiden soil is mapped on 83 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 6 percent of the area.
  • Highways inside the boundary: FM 2738. State permit office: TxDOT Fort Worth District.
  • Railroad track inside the boundary: none mapped.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring near Mountain Creek in The Homesteads?

The Homesteads is an unincorporated community in Johnson County, so streets are county or state roads rather than city streets. The Census Bureau counted 3,890 people here in the 2020 Census. Along roads such as Gina Lane, our crews can install water, sewer, gas, electric conduit and fiber by directional boring, with the route planned around existing lines.

Our main office is in Yukon, Oklahoma, and The Homesteads work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Trinity is a family business started in 1965, with directional boring work dating to 1982. Our record of no utility strike in over 25 years matters where new conduit routes meet lines already buried along FM 2738.

Ditch Witch JT922 compact directional drill beside the Trinity Boring Solutions truck at NE 24th Street in Oklahoma City
Our Ditch Witch JT922 compact directional drill beside the Trinity truck on a sleeve bore at NE 24th Street in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What is Heiden soil like to bore in The Homesteads?

The USDA soil survey maps Heiden soil across 83 percent of The Homesteads, including Heiden clay on 70 percent of the mapped area at 1 to 3 percent slopes and 13 percent at 3 to 8 percent slopes. Surface texture is clay across 95 percent of the area. At about 40 inches below the surface, the survey maps clay throughout, with average clay content of 50 percent. We treat mapped Heiden, Ferris, Tinn, and Navo soil patterns as planning guides, not test borings. The heavy clay can stay open during drilling, but it can also cling to the reamer and grip pipe.

USDA soil survey, inside the The Homesteads mapped community boundaryWhat is mapped
Soil series mappedHeiden 83 percent, Ferris 5 percent, Tinn 5 percent and Navo 4 percent
Texture at the surfaceclay 95 percent and clay loam 4 percent
Texture about 40 inches downclay 100 percent
Engineering class about 40 inches downfat clay (CH) 100 percent
Average clay content about 40 inches down50 percent
Bedrock mapped within 60 inches6 percent of the area (0 percent hard rock, 6 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils5 percent of the area
High corrosion risk for uncoated steel100 percent of the area

The soil survey maps bedrock within 60 inches in 6 percent of The Homesteads, all weathered; hard bedrock is not mapped within that depth. The typical bedrock depth is 45 inches, so a route still needs field checks. No seasonal water table is mapped within 60 inches, while flood prone soils cover 5 percent. High steel corrosion risk is mapped across the area. The Cenozoic Silty Clay Decomposition Residuum and Late Cretaceous Eagle Ford Formation include clay, shale, siltstone and limestone, so conditions can change where soil meets rock.

What does it take to bore clay in The Homesteads?

Heiden clay dominates the mapped ground in The Homesteads. We plan the bore around sticky cuttings, nearby pavement and the marked lines along routes such as FM 2738.

  1. Heiden clay can stick to the reamer, so we use thinner drilling fluid with polymer and open the hole in stages before pulling pipe.
  2. With clay mapped throughout the ground at about 40 inches, we watch fluid returns closely to limit pressure that could lift pavement near FM 2738.
  3. Before drilling near a marked line on Gina Lane, we hydrovac expose it; paint shows its position, not its depth.
  4. For a planned crossing near Mountain Creek, we check route depth against the channel and consider Corps jurisdiction during planning.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

What does a bore have to cross on FM 2738 in The Homesteads?

FM 2738 is the state highway mapped inside The Homesteads, with 1.7 roadway miles inside the community boundary. No other highway is mapped within 1.5 miles outside it. Marianna Way is the longest named street at 2.63 miles, followed by Gina Lane at 2.56 miles and Kelly Lane at 2.52 miles. The community has 32.97 public road centerline miles in all. A route under FM 2738 needs a highway crossing plan; a street route still needs marked utilities located and exposed before drilling near them.

CrossingTypeMapped extentWho has a say
FM 2738State highway1.7 roadway miles insideState highway office
Mountain CreekStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Fish Spring BranchStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
King BranchStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside The Homesteads or within 1 mile outside the community boundary, and no street and rail crossing is mapped. There are no named streams inside the community, but Mountain Creek is 0.2 miles from the boundary and Fish Spring Branch is 0.5 miles away. No street crossing of a named stream is mapped inside the community, and no lake or pond is mapped within 1 mile. A proposed channel crossing near Mountain Creek still needs its site conditions checked during planning.

Who approves a bore under FM 2738 in Johnson County in The Homesteads?

The Homesteads has no city government, so street authority rests with Johnson County or the state, depending on the road. FM 2738 is a state highway, and the utility owner, not the driller, submits the right of way permit application through TxDOT’s RULIS system. For this county, TxDOT’s Fort Worth District reviews it. We prepare the bore plan and profile for the utility owner’s application and work under its permit. TxDOT cover rules set 60 inches for electric and communication lines at crossings, 60 inches for water and pressurized sewer crossings, and may specify another depth in the permit. No railroad is mapped here; a channel crossing near Mountain Creek is checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried in Johnson County near The Homesteads?

A public water system could not be matched to a specific address in The Homesteads from EPA drinking water records, so confirm the provider with the county or local water district before planning a bore. Johnson County electric service is reported by Oncor Electric Delivery Company, Texas-New Mexico Power, HILCO Electric Cooperative and United Electric Cooperative Service. Those reports do not identify the owner at every address. Before a conduit bore along Gina Lane, confirm the line owner and hydrovac pothole marked utilities on the route.

Line ownerWhat it isSourceSize
Oncor Electric Delivery Company, Texas-New Mexico Power, HILCO Electric Cooperative and United Electric Cooperative ServiceElectric utilities reporting service in Johnson CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

American Community Survey 2019 to 2023 five year estimates put the median housing year in The Homesteads at 1999; 54 percent of units date from 1960 to 1999 and 46 percent from 2000 or later. Housing age does not establish the age of a buried line, but it can help frame replacement work versus a new service along Marianna Way. Before the drill approaches a marked water or electric line, we expose it by hydrovac because surface marks show position, not depth.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

How far is The Homesteads from Alvarado and nearby towns?

The Homesteads is in Johnson County, at an elevation of 697 feet across 3.82 square miles, and its ZIP code is 76009. Venus is 5.1 miles southeast; Alvarado is 5.3 miles southwest; Mansfield is 7.0 miles north. Cleburne, the county seat, is 16.6 miles southwest. From the Yukon, Oklahoma main office, the route is 241 road miles and a 4.8 hour drive. That distance affects mobilization for a bore on Marianna Way or elsewhere in the community.

Places near The Homesteads

What kinds of bores come up on Gina Lane in The Homesteads?

  • Highway crossing: A bore beneath FM 2738 is planned for the highway right of way, with the utility owner handling the TxDOT permit.
  • Water service: A service route near Marianna Way needs the address specific water provider confirmed before the bore is laid out.
  • Fiber conduit: A conduit bore along Gina Lane starts with confirming the electric or communication line owner and exposing marked conflicts.
  • Street replacement: A replacement route under Kelly Lane can avoid open cutting pavement while crossing lines exposed by hydrovac.
  • Creek crossing: A proposed route near Mountain Creek needs channel depth planning and a check for Corps jurisdiction.
  • Acreage service: A longer service route outside the mapped community can be planned from an Alvarado area map pin and pipe details.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a bore on Marianna Way in The Homesteads?

For a quote near Marianna Way, send us the address or map pin, what is going in the ground, pipe or conduit size, footage, and any sketch or plans. For a route on Marianna Way, a map that shows the tie in points and nearby crossings helps us assess the work. Include any known pavement, drainage or utility conflicts so we can plan the route.

The job details set the price, including bore length, pipe or conduit size, soil and rock, crossings, exposed utilities, pavement, pits, excavator time and backfill. Heiden clay can mean staged reaming and careful fluid control, while a route under FM 2738 brings a state highway permit into the plan. Creek or drainage crossings and the 241 road miles from Yukon can also affect the work and mobilization.

Questions people ask about boring in The Homesteads

Does Trinity Boring Solutions take jobs in The Homesteads and Johnson County?

Yes. We take directional boring work across Texas, including The Homesteads near FM 2738. Our own crews and partner drilling contractors Trinity has personally vetted staff the work, while you deal with Trinity from the first call through the bore log. For a route near FM 2738, the crew plan follows the site and the utility owner’s permit.

What does The Homesteads housing age near Gina Lane mean for replacement bores?

The American Community Survey 2019 to 2023 estimates give The Homesteads a median housing year of 1999, with 54 percent of units built from 1960 to 1999 and 46 percent from 2000 onward. Those figures do not date buried pipes. They help frame whether work near Gina Lane is replacing an existing line or adding a new service.

Does Heiden soil in The Homesteads corrode steel, and what pipe should I use?

The USDA soil survey maps high steel corrosion risk across The Homesteads, including its Heiden clay. We account for clay surface soil in The Homesteads, while HDPE is not affected by that soil corrosion concern. For steel casing or tracer wire, the line owner chooses any coating. We confirm the material and route for the specific work, such as a service crossing near Marianna Way.

What ground will a bore pass through in The Homesteads Heiden soil?

Heiden soil covers 83 percent of The Homesteads in the USDA soil survey. Clay makes up 95 percent of mapped surface texture, and clay is mapped throughout at about 40 inches below the surface. That heavy ground can hold an open hole but stick to the reamer, so a route near FM 2738 may need staged reaming and fluid management.

Will a bore in The Homesteads hit rock near FM 2738?

The soil survey maps bedrock within 60 inches in 6 percent of The Homesteads, and that mapped bedrock is weathered. Hard bedrock is not mapped within 60 inches, but that does not rule out deeper rock. The Eagle Ford Formation includes shale, siltstone and limestone, so the route near FM 2738 still needs field checks.

Who approves a The Homesteads bore under FM 2738?

FM 2738 is a state highway, so the utility owner submits the right of way application through TxDOT’s RULIS system. The TxDOT Fort Worth District reviews the application for Johnson County. We provide the bore plan and profile for the owner’s filing and work under the permit issued to that owner.

Does Trinity cover Venus and rural sites outside The Homesteads?

Yes. We take work across Texas, including Venus and rural sites outside The Homesteads. Venus is 5.1 miles southeast of the community. Send the address or map pin and the line details, including what will be installed and its size, so we can consider the route and mobilization.

How soon should I call Texas811 for a bore near Marianna Way in The Homesteads?

Make the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If a start near Marianna Way slips more than 14 days past the original notice, make a new request. Before work continues in Johnson County, we have worn or moved marks refreshed through Texas811.

What affects the cost of a directional bore under FM 2738 in The Homesteads?

The price depends on length, pipe or conduit size, Heiden clay, rock, exposed utilities, crossings, pavement, pits and backfill. Work under FM 2738 adds highway planning, while drainage conditions near Mountain Creek can affect the route. The 241 road miles from Yukon also affect mobilization for a job in The Homesteads.

Where the The Homesteads facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in The Homesteads

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in The Homesteads, Texas

Type the address of your job in The Homesteads. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for The Homesteads

Same county: Burleson · Cleburne · Joshua · Keene · Pecan Plantation · Godley · Grandview · Rio Vista · Cross Timber · Coyote Flats · Cresson. All counties: Texas county list.