trinityboringsolutions.com

Rusk Texas Directional Boring: Trawick Soil, College Creek and US 84

Quick Answer: What does the top five feet look like in Rusk, and what lies under it? The USDA soil survey maps fine sandy loam across 59 percent of the surface, with sandy clay loam common at about 40 inches. Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for lines near College Creek. Rusk is 345 road miles from our Yukon, Oklahoma main office, and the Trawick soil and mapped bedrock can affect the bore path. Sandy clay loam can hold the hole, so we manage fluid and reaming to keep the bore on plan.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Rusk bores at a glance

  • County seat of Cherokee County, Texas. Population 5,553 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 345 miles, about 6.9 hours of driving.
  • Ground: Trawick soil is mapped on 25 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 42 percent of the area.
  • Highways inside the boundary: US 84, US 69, FM 343, Loop 62 and FM 23. State permit office: TxDOT Tyler District.
  • Railroad track inside the boundary: a short line railroad (reporting mark RPP).
  • Named streams inside the boundary: College Creek.
  • Public water: City of Rusk, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring near College Creek in Rusk?

What does the top five feet of ground look like in Rusk, and what is under it? The USDA soil survey maps fine sandy loam at the surface and bedrock in parts of the area below. For water, sewer, gas, electric conduit or fiber along a Rusk street or near College Creek, call Trinity Boring Solutions. The Census Bureau Vintage 2024 estimate puts Rusk at 5,553 people in Cherokee County.

Our main office is in Yukon, Oklahoma, and Rusk work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Rusk work can range from a 3/4 inch service line to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. Our family business started in 1965 and has done directional boring since 1982, including work planned around features such as College Creek.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

How does Trawick soil affect directional boring in Rusk?

The USDA soil survey maps Trawick as 25 percent of the soil series in Rusk. Trawick Bub complex with 8 to 40 percent slopes covers 18 percent of mapped area, so a bore route may face changing grades. Fine sandy loam is the surface texture across 59 percent. At about 40 inches below the surface, sandy clay loam is mapped across 36 percent, while loamy fine sand accounts for 12 percent. These are mapped patterns, not test borings, and a route near College Creek still needs its own ground review.

USDA soil survey, inside the Rusk city limitsWhat is mapped
Soil series mappedTrawick 25 percent, Cuthbert 17 percent, Elrose 9 percent, Nacogdoches 9 percent and Lilbert 8 percent
Texture at the surfacefine sandy loam 59 percent, loamy fine sand 22 percent and paragravelly clay loam 18 percent
Texture about 40 inches downsandy clay loam 36 percent, bedrock 24 percent and loamy fine sand 12 percent
Engineering class about 40 inches downclayey sand (SC) 33 percent, lean clay (CL) 15 percent and fat clay (CH) 11 percent
Average clay content about 40 inches down27 percent
Bedrock mapped within 60 inches42 percent of the area (0 percent hard rock, 42 percent weathered rock)
Seasonal water table within 60 inches17 percent of the area
Flood prone soils7 percent of the area
High corrosion risk for uncoated steel47 percent of the area

Bedrock is mapped within 60 inches across 42 percent of Rusk, with a typical depth of 33 inches. The mapped bedrock is weathered, so a hard soil bit may suit it, though drilling can slow at the soil and rock contact. A seasonal water table is mapped within 60 inches across 17 percent, which can fill pits; flood prone soils cover 7 percent, including areas to consider near College Creek. High steel corrosion risk is mapped across 47 percent, so the line owner should consider casing and tracer wire materials. The geologic map identifies Eocene Queen City Sand, a sand and clay unit.

How do crews handle sandy clay loam on a Rusk bore?

At about 40 inches, sandy clay loam is mapped across 36 percent of Rusk. We use the route and ground information to set the bore plan, then track the head and adjust how we open the hole.

  1. At a Rusk route through Trawick soil, we watch how clay builds on the reamer and open the hole in stages before pulling the pipe.
  2. Where sandy clay loam or clay holds the hole, we adjust drilling fluid and keep the reamer plan suited to the soil.
  3. Every marked utility on a bore path in Rusk is exposed by hydrovac before the drill approaches; paint on Dickinson Drive does not show depth.
  4. Near College Creek, we plan pit placement around mapped water conditions, track the drill head from the surface and log depth and pitch.
Rock bit on the drill rod at the front of a Vermeer D24x40 S3 with broken sandstone at the entry of a rock bore in Guthrie, OK
Rock bit on the drill rod with broken sandstone at the entry of a rock bore in Guthrie, Oklahoma.

What might a Rusk bore cross near a short line railroad (reporting mark RPP)?

US 84 and FM 343 each have 5.2 mapped roadway miles inside Rusk. US 69 has 3.6 miles, while Loop 62 has 1.8 miles. These routes call for careful alignment when a new line must pass under a highway or along its right of way. Loop 343 is the longest named street at 3.7 miles. Dickinson Drive runs 2.55 miles and Johnson Drive 1.72 miles, offering local examples of where a service or conduit route may need to cross pavement without an open cut.

CrossingTypeMapped extentWho has a say
US 84US highway5.2 roadway miles insideState highway office
US 69US highway3.6 roadway miles insideState highway office
FM 343State highway5.2 roadway miles insideState highway office
Loop 62State highway1.8 roadway miles insideState highway office
FM 23State highway1.4 roadway miles insideState highway office
FM 752State highway1.3 roadway miles insideState highway office
FM 2972State highway0.8 roadway miles insideState highway office
FM 768State highway0.5 roadway miles insideState highway office
Texas State Highway 110State highway0.4 roadway miles insideState highway office
FM 1248State highway0.4 roadway miles insideState highway office
a short line railroad (reporting mark RPP)Railroad0.56 track miles insideThe railroad
College CreekStream2.2 channel miles insideChecked for Corps of Engineers jurisdiction
Horse CreekStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Black BranchStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

The short line railroad (reporting mark RPP) has 0.56 track miles within Rusk, on the Neches Subdivision. No mapped street and rail crossings are listed, but a proposed rail crossing still needs an agreement with the railroad that owns the track. College Creek runs 2.2 channel miles in the city, and seven mapped street crossings of named streams are recorded. City Lake and Cherokee Lake are also inside the limits, so a route near water needs crossing review during planning.

Who approves a Rusk bore under US 84?

For work in the US 84, US 69, FM 343 or other state highway right of way, the utility that owns the line files for a TxDOT utility permit through RULIS. TxDOT Tyler District reviews the application, and we give the line owner the bore plan and profile for its filing. Cover depends on the line: electric and communication need 60 inches at a highway crossing and 48 inches along the right of way; water needs 60 inches at crossings and 36 inches along it; pressurized sewer needs 60 inches at crossings. A railroad crossing near the RPP track needs the track owner’s agreement. City streets such as Johnson Drive belong to Rusk, and College Creek crossings are checked for federal jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the lines already in the ground in Cherokee County in Rusk?

The City of Rusk public water system serves 5,602 people through 2,133 service connections and draws from groundwater wells. For an electric conduit bore in Cherokee County, Oncor Electric Delivery Company, Cherokee County Electric Cooperative Association and Houston County Electric Cooperative report service in the county. That list does not establish which company serves a particular address, so we confirm the line owner before planning a conduit route near US 69 or another Rusk road.

Line ownerWhat it isSourceSize
City of RuskPublic water systemGroundwater wells2,133 connections, 5,602 people served
Oncor Electric Delivery Company, Cherokee County Electric Cooperative Association and Houston County Electric CooperativeElectric utilities reporting service in Cherokee CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Rusk’s median housing year at 1983; 22 percent of homes were built before 1960 and 18 percent in 2000 or later. That mix can mean a Dickinson Drive project replaces an older line or adds service to newer construction. Before drilling near an existing utility, we hydrovac pothole each marked line on the bore path because paint shows its position, not its depth.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

Where does Rusk sit in relation to Jacksonville and nearby towns?

Rusk is the Cherokee County seat, at an elevation of 540 feet, with 7.23 square miles inside the city limits and ZIP code 75785. Gallatin is 6.8 miles north; Reklaw is 10.9 miles northeast; Alto is 11.1 miles southeast; New Summerfield is 12.8 miles north. Jacksonville, the nearest larger city, is 13.1 miles northwest. Our Yukon yard is 345 road miles away, a 6.9 hour drive, so distance can affect mobilization for work near Loop 343 or rural sites outside Rusk.

Places near Rusk

What kinds of bores come up around Dickinson Drive in Rusk?

  • Highway crossing: A line beneath US 84 needs a bore plan that accounts for the highway right of way and the utility type.
  • Water service: A connection near the City of Rusk groundwater system can follow a route along US 69 without cutting the street.
  • Fiber conduit: A route along Dickinson Drive can use a bore to pass beneath pavement and keep the surface uncut.
  • Creek crossing: A crossing at College Creek needs a planned path beneath the channel and a jurisdiction check during planning.
  • Rail crossing: A proposed line at the RPP track needs an agreement with the railroad that owns the track.
  • Rural service: A line toward Gallatin can be scoped for its route, size and footage before mobilization from Yukon.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a directional bore near Loop 343 in Rusk?

For a quote on a Rusk job, send the address or map pin, what will go in the ground, pipe or conduit size and footage; a sketch or plans also help. A line near Loop 343 may need a different route and crossing plan than one near College Creek, so include the proposed path and any known pavement, track or water crossings.

Price is set by the job details, not just the length. In Rusk, soil and rock come first: sandy clay loam is mapped below the surface and weathered bedrock is mapped in parts of the area. Next are the number of utilities to expose, crossings such as US 84 or the RPP track, and any concrete or pavement. Creek crossings, pits, excavator time and sand backfill also affect the scope. Mobilization matters because Rusk is 345 road miles from Yukon; high profile or emergency work can add planning demands.

Questions people ask about boring in Rusk

Does Trinity take directional boring jobs in Rusk and Cherokee County, and who staffs them?

Yes. Trinity takes directional boring work in Rusk and Cherokee County, with our own crews and partner contractor crews from satellite yards. Customers work with Trinity throughout the job, from the first call through the bore log. A route near College Creek or a Rusk road can be discussed with the same point of contact.

Who owns electric service in Cherokee County near my Rusk project, and who confirms conduit specs?

Oncor Electric Delivery Company, Cherokee County Electric Cooperative Association and Houston County Electric Cooperative report electric service in Cherokee County. Which one serves a specific Rusk address must be confirmed with the line owner. Confirm conduit requirements with that owner before planning a bore, including a route near US 69.

Does Rusk or the county control Johnson Drive, and can a bore avoid cutting it?

Rusk is an incorporated city, so Johnson Drive is a city street. Directional boring can pass beneath street pavement rather than opening a trench through it. The planned route still needs to account for marked utilities and any applicable highway right of way if the bore connects with US 84.

What do older homes near Dickinson Drive mean for replacement bores in Rusk?

Rusk’s median housing year is 1983, and the American Community Survey 2019 to 2023 five year estimates show 22 percent of homes were built before 1960. A Dickinson Drive project could replace older buried service or add a new connection. We expose marked utilities along the bore path before drilling near them.

Could groundwater or flood prone ground affect bore pits near College Creek in Rusk?

It can. The USDA soil survey maps a seasonal water table within 60 inches across 17 percent of Rusk and flood prone soils across 7 percent. Near College Creek, those conditions can affect pit placement and water control. We consider the proposed route and ground information while planning the crossing.

Does Trawick soil in Rusk corrode steel, and what pipe should a bore use?

The USDA soil survey maps high steel corrosion risk across 47 percent of Rusk, and Trawick is the leading mapped soil series at 25 percent. Steel casing and tracer wire may need material or coating review. The line owner selects suitable materials; HDPE does not share the steel corrosion concern.

Will Trinity cover Gallatin and rural sites outside Rusk too?

Yes. Trinity takes work in Gallatin and rural areas beyond Rusk, as well as within the city. Gallatin is 6.8 miles north of Rusk, and each route is scoped for its access, length and ground. Distance from our Yukon yard can affect mobilization for a rural job.

How much notice does Texas811 need for a bore along Loop 343 in Rusk?

The person arranging a bore along Loop 343 needs to submit a Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. If the start moves more than 14 days past the original notice, submit a new request. Worn or moved marks must be refreshed through Texas811 before work continues.

What affects the cost of a directional bore under US 84 in Rusk?

The route, bore length, pipe or conduit size, and Rusk ground conditions all shape the price. A US 84 crossing can involve pavement and highway permit planning; a route near College Creek adds a water crossing to assess. The number of utilities to expose, pits, equipment time and mobilization from Yukon also affect the job scope.

Where the Rusk facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Rusk

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Rusk, Texas

Type the address of your job in Rusk. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Rusk

Same county: Shadybrook · Wells · Bullard · Cuney. All counties: Texas county list.