trinityboringsolutions.com

Bells Texas Directional Boring: Normangee Clay, US 69, Corneliason Creek

Quick Answer: We handle directional boring, also called horizontal directional drilling (HDD), in Bells for routes beneath US 69 and other local crossings. Bells is 192 road miles from our Yukon, Oklahoma main office, so we plan crew staffing and mobilization around work near Corneliason Creek. Normangee soil is common here, and the heavy clay mapped below the surface can cling to the reamer and grip pipe. We adjust the fluid and reaming plan to suit that ground.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Bells bores at a glance

  • Incorporated city in Grayson County, Texas. Population 1,520 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 192 miles, about 3.8 hours of driving.
  • Ground: Normangee soil is mapped on 44 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 70 percent of the area.
  • Highways inside the boundary: US 69, US 82, Texas State Highway 56 and FM 1897. State permit office: TxDOT Paris District.
  • Railroad track inside the boundary: Texas Northeastern Railroad and Texas Northeastern Railroad (line shown as out of service), with 4 mapped street and rail crossings.
  • Named streams inside the boundary: Corneliason Creek.
  • Public water: City of Bells, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring in Bells, Grayson County?

We take directional boring work in Bells, Grayson County, where the Census Bureau Vintage 2024 estimate puts the population at 1,520. For a water or sewer line, we can plan a route beside McFarland Street or Pecan Street; electric conduit and fiber can follow a route selected for the property. The line type and path determine what we need to check before drilling.

Our main office is in Yukon, Oklahoma, and Bells work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business that started in 1965, and we have drilled directionally since 1982. From a short service connection near Bells Boulevard to a longer crossing, we handle lines from 3/4 inch service lines up to 48 inch casing.

Trinity Boring Solutions directional boring crew, drill rig and hydrovac trailer staged along an airport service road at Will Rogers World Airport in Oklahoma City
Our boring crew, drill and hydrovac trailer staged along a service road at Will Rogers World Airport in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

How does Normangee soil affect boring in Bells?

The USDA soil survey maps Normangee soil across 44% of Bells, with Normangee clay loam and Normangee Urban land complex among the mapped units. At about 40 inches below the surface, clay accounts for 73% of mapped texture, and the average clay content at that depth is 48%. The survey also maps 45% of the surface as clay loam and 33% as clay. These are mapped soil patterns, not test borings, so the route still needs to be judged on site. Clay can stay open but stick to tooling and tighten around pipe.

USDA soil survey, inside the Bells city limitsWhat is mapped
Soil series mappedNormangee 44 percent, Vertel 14 percent, Wilson 10 percent, Heiden 7 percent and Elbon 7 percent
Texture at the surfaceclay loam 45 percent, clay 33 percent and silty clay loam 11 percent
Texture about 40 inches downclay 73 percent, silty clay 15 percent and silty clay loam 7 percent
Engineering class about 40 inches downfat clay (CH) 79 percent and lean clay (CL) 17 percent
Average clay content about 40 inches down48 percent
Bedrock mapped within 60 inches70 percent of the area (0 percent hard rock, 70 percent weathered rock)
Seasonal water table within 60 inches7 percent of the area
Flood prone soils7 percent of the area
High corrosion risk for uncoated steel99 percent of the area

The soil survey maps weathered bedrock within 60 inches across 70% of Bells, with a typical depth of 46 inches; a route may slow where softer rock meets soil. The map lists Eagle Ford Formation, of Turonian age, described with shale, siltstone and limestone. Seasonal water table and flood prone soils are each mapped across 7%, so creekside pits need attention after wet weather. High steel corrosion risk covers 99% of the mapped area, a material concern for steel casing or tracer wire that the line owner should consider.

What does it take to bore through clay in Bells?

Normangee clay and clay loam call for a controlled drilling plan in Bells. We watch the fluid returns, keep pressure suited to the route, and have pipe ready before opening the final ream.

  1. Normangee clay can ball up on tooling, so we use a thinner fluid with polymer and open the hole in stages before pulling pipe.
  2. With heavy clay mapped beneath Bells, we watch fluid returns and keep pressure controlled so it does not lift pavement near McFarland Street.
  3. Before approaching a marked line near the City of Bells water system, we hydrovac pothole it because locate paint shows position, not depth.
  4. At a Corneliason Creek crossing, we plan depth below the channel, track the drill head from the surface, and log its depth and pitch.
Trinity Boring Solutions crew in hard hats at the exit pit with rock tooling on a sandstone bore in Guthrie, OK
Our crew at the exit pit with rock tooling on a sandstone bore in Guthrie, Oklahoma.

What is in the way of a new line in Bells near Corneliason Creek?

US 69 has 4.2 mapped roadway miles inside Bells, while US 82, Texas State Highway 56 and FM 1897 also pass through town. A line beneath an existing highway pavement is bored or tunneled rather than open cut. Bells Boulevard is the longest named street at 2.52 miles in town; Pecan Street runs 2.12 miles and McFarland Street runs 1.68 miles. A route under one of these streets can keep pavement intact, with entry and exit pits set in the dirt.

CrossingTypeMapped extentWho has a say
US 69US highway4.2 roadway miles insideState highway office
US 82US highway0.8 roadway miles insideState highway office
Texas State Highway 56State highway2.5 roadway miles insideState highway office
FM 1897State highway1.6 roadway miles insideState highway office
Texas Northeastern RailroadRailroad2.06 track miles insideThe railroad
Texas Northeastern Railroad (line shown as out of service)Railroad0.11 track miles insideThe railroad
Corneliason CreekStream1.92 channel miles insideChecked for Corps of Engineers jurisdiction
Mill CreekStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Brushy CreekStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Sand CreekStream nearby0.9 miles outsideChecked for Corps of Engineers jurisdiction
Valley LakeLake or pond766 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

The Texas Northeastern Railroad has 2.06 track miles mapped in Bells, plus 0.11 miles on a line shown as out of service. Public mapping shows 4 street and rail crossings in town, so a route near the tracks needs early coordination with the railroad owner. Corneliason Creek runs 1.92 channel miles inside the limits, and 3 street crossings of named streams are mapped. A creek route needs depth planning, with Corps jurisdiction checked during planning.

Who permits a Bells bore beneath US 69?

For work in the right of way of US 69, US 82, Texas State Highway 56 or FM 1897, the utility owner files the TxDOT utility permit through RULIS; the contractor does not file it. We give the line owner the bore plan and profile, then work under the permit issued to that owner. The TxDOT Paris District reviews Grayson County applications. Cover depends on the line: electric and communication crossings need 60 inches below the lowest crossed grade, while water crossings need 60 inches; the permit can set another depth.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried near the City of Bells water system?

The local government owned City of Bells public water system uses groundwater wells and has 707 service connections serving 2,101 people. Electric service reporting for Grayson County includes Oncor Electric Delivery Company, Texas-New Mexico Power, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Fannin County Electric Cooperative and Grayson-Collin Electric Cooperative. The electric line owner must be confirmed for the Bells address before conduit routing.

Line ownerWhat it isSourceSize
City of BellsPublic water systemGroundwater wells707 connections, 2,101 people served
Oncor Electric Delivery Company, Texas-New Mexico Power, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Fannin County Electric Cooperative and Grayson-Collin Electric CooperativeElectric utilities reporting service in Grayson CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put the median Bells housing year at 1985; 30% of homes were built before 1960, 42% from 1960 to 1999 and 28% in 2000 or later. A replacement route near Pecan Street may need to work around older buried services, while newer areas can call for a new connection. We hydrovac pothole marked lines on the route before drilling near them, since locate marks do not show depth.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

Where is Bells in relation to Sherman and our Yukon office?

Bells is an incorporated town in Grayson County, with 2.12 square miles of land and an elevation of 668 feet. Its ZIP code is 75414. Savoy is 2.9 miles southeast, Whitewright is 7.3 miles south, and Tom Bean is 7.8 miles southwest. Sherman, the county seat and nearest larger city, is 12.3 miles west. From our Yukon yard, Bells is 192 road miles away and about a 3.8 hour drive. That distance is part of planning crew travel and equipment mobilization for a Bells job.

Places near Bells

What kinds of bores fit Bells Boulevard and other local routes?

  • Highway crossing: A route beneath US 69 can be bored under existing pavement, with the utility owner arranging the TxDOT right of way permit.
  • Water service: A connection near the City of Bells system needs a route checked against existing service lines before drilling.
  • Fiber drop: A fiber route along Bells Boulevard can pass under pavement without cutting the street, with marked utilities exposed first.
  • Creek crossing: A Corneliason Creek bore needs a planned depth beneath the channel and a check for federal waterway jurisdiction.
  • Rail crossing: A route beneath the Texas Northeastern Railroad needs the track owner’s agreement and crossing conditions before drilling.
  • Street replacement: A sewer or water replacement near McFarland Street can use pits on each side to avoid an open cut across pavement.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Bells bore near the Texas Northeastern Railroad?

For a route near Bells Boulevard, start with the address or map pin and what will go underground. Tell us the pipe or conduit size and footage; a sketch or plans help show how the path relates to US 69, Corneliason Creek or nearby utilities. That gives us the basic scope to review before we talk through access and crossings.

The ground is a major factor because Normangee clay can cling to the reamer and grip the pipe. Price also reflects bore length and pipe size, the number of utilities to expose, pavement or concrete, pits and excavator time, and sand backfill. A crossing near US 69 or the Texas Northeastern Railroad adds coordination to the route. Creek work at Corneliason Creek, emergency timing and the 192 road miles from Yukon can also affect the plan and mobilization.

Questions people ask about boring in Bells

Does Trinity Boring Solutions take directional boring jobs in Bells, Grayson County?

Yes. We take work in Bells and across Texas, and the job stays with Trinity from the first call through the bore log. Our own crews and vetted partner contractor yards support the work, rather than a local Bells office. For a route near US 69, we will review the line type, size and crossing details.

Can a line be bored under Corneliason Creek in Bells?

A bore can be planned beneath Corneliason Creek, which runs 1.92 channel miles through Bells. The path needs enough depth to stay under the channel, and planning checks whether the crossing falls under U.S. Army Corps of Engineers jurisdiction. The creek banks and access also shape where entry and exit pits can go.

Who runs the public water system in Bells, and where does its water come from?

The local government owned City of Bells system supplies public water from groundwater wells. Public records list 707 service connections and 2,101 people served. For a bore near a service line on Pecan Street, the existing water line needs to be located and exposed where it crosses the planned path.

Which electric company serves my Bells, Grayson County address, and who confirms conduit specs?

County reporting lists several electric utilities, including Oncor Electric Delivery Company and Texas-New Mexico Power, but does not identify one provider for every Bells address. Confirm the line owner and conduit specifications for the property before planning an electric bore. A route near US 82 still needs its marked utilities checked in the field.

Does Bells control McFarland Street, and does a bore require cutting it?

Bells is incorporated, so its public streets are under city control. A directional bore can pass beneath McFarland Street with pits in the dirt on either side, avoiding an open cut across pavement. The specific route and any right of way conditions still need review before work begins.

How old are buried lines near Pecan Street in Bells, and what does that mean for replacement bores?

The American Community Survey 2019 to 2023 estimates give Bells a median housing year of 1985, with 30% of homes built before 1960. That age does not establish the condition or location of a particular pipe. For a replacement bore near Pecan Street, we expose marked utilities along the path before drilling close to them.

Does Trinity cover Savoy and rural sites outside Bells?

Yes. We take Texas work beyond Bells, including jobs around nearby Savoy, 2.9 miles southeast, and rural properties outside the town limits. The route, access and distance from Yukon affect how we plan the work. A location pin helps us assess whether the line crosses a road, creek or other obstruction.

How much 811 notice is needed for a bore on Bells Boulevard, and what if marks move?

Texas811 requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If work on Bells Boulevard starts more than 14 days after the original notice, submit a new request. Worn or moved marks must be refreshed through Texas811 before work continues.

What affects the cost of directional boring near US 69 in Bells?

The price reflects the job scope, not just length. Normangee clay, pipe size, bore length, utilities to expose, pavement, pits and excavator time all matter. A crossing under US 69 or near the Texas Northeastern Railroad can add coordination, while Corneliason Creek affects the crossing plan. Mobilization also depends on the 192 road miles from Yukon.

Where the Bells facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Bells

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Bells, Texas

Type the address of your job in Bells. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Bells

Same county: Denison · Van Alstyne · Whitesboro · Howe · Pottsboro · Gunter · Preston · Collinsville · Tioga · Sherwood Shores · Southmayd · Knollwood. All counties: Texas county list.