Warren City Texas Directional Boring: Cuthbert Soil, Moody Creek And FM 2275
Quick Answer: FM 2275 is the state road a Warren City bore may need to cross; Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), here and across Texas. From our Yukon, Oklahoma main office, the job is 335 road miles away, so a Moody Creek crossing or mobilization plan matters early. USDA maps Cuthbert fine sandy loam across 30 percent of the city, and sandy clay loam is common about 40 inches down. That ground can hold a hole, so we match drilling fluid and reaming to the route before pulling pipe.
Warren City bores at a glance
- Incorporated city in Gregg County and Upshur County, Texas. Population 323 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 335 miles, about 6.5 hours of driving.
- Ground: Cuthbert soil is mapped on 30 percent of the area, with sandy clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: FM 2275. State permit office: TxDOT Tyler District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Moody Creek.
- Public water: City of Warren City, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who handles directional boring near Moody Creek in Warren City?
FM 2275 and Moody Creek are local route considerations when we plan a bore in Warren City, Gregg County. We read the 323 population estimate as context, then plan underground work around streets such as George Richey Road, not headcount alone. We install water, sewer, gas, electric conduit and fiber along routes such as George Richey Road and Texas Street, with the line type and existing utilities checked for each address.
Our main office is in Yukon, Oklahoma, and Warren City work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business that started in 1965, and our directional boring work dates to 1982. For Warren City routes near Moody Creek, our equipment range covers 3/4 inch service lines through 48 inch casing and bores from 10 feet to 5,000 feet.

What kind of ground does Cuthbert soil mean for Warren City bores?
The USDA soil survey maps Cuthbert soil across 30 percent of Warren City, with Cuthbert fine sandy loam on slopes of 8 to 25 percent. Bowie fine sandy loam accounts for 26 percent, while Lilbert loamy fine sand accounts for 14 percent. At about 40 inches below the surface, sandy clay loam is mapped under 80 percent of the area, and the average clay content there is 27 percent. Mapped Cuthbert and Bowie patterns guide our expectations, but they are not test borings for a Warren City crossing. On a George Richey Road route, actual soil can vary along the bore.
| USDA soil survey, inside the Warren City city limits | What is mapped |
|---|---|
| Soil series mapped | Cuthbert 30 percent, Bowie 26 percent, Lilbert 14 percent, Iulus 9 percent and Kirvin 7 percent |
| Texture at the surface | fine sandy loam 70 percent, loamy fine sand 19 percent and very fine sandy loam 5 percent |
| Texture about 40 inches down | sandy clay loam 80 percent, fine sandy loam 9 percent and clay loam 6 percent |
| Engineering class about 40 inches down | clayey sand (SC) 48 percent, lean clay (CL) 38 percent and silty clayey sand (SC SM) 9 percent |
| Average clay content about 40 inches down | 27 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 38 percent of the area |
| Flood prone soils | 12 percent of the area |
| High corrosion risk for uncoated steel | 34 percent of the area |
Bedrock is not mapped within 60 inches in Warren City, though the geologic map shows Queen City Sand, a Lutetian unit of sand, siltstone and claystone. The survey maps a seasonal water table within 60 inches across 38 percent of the area and flood prone soils across 12 percent, so creekside pits and depth need planning. High steel corrosion risk is mapped across 34 percent; the line owner should weigh casing and tracer wire materials, while HDPE avoids that soil concern.
How do we drill Warren City sandy clay loam?
Warren City soil maps show sandy clay loam below the surface and fine sandy loam at the surface. We check the route and plan the fluid, reaming sequence and pull around those mapped conditions.
- Cuthbert soil is mapped on sloping ground, so we check the proposed George Richey Road profile and adjust the bore plan to the route.
- With sandy clay loam common at about 40 inches, we manage fluid and ream in stages to control a hole that can cling to the pipe.
- The seasonal water table is mapped within 40 inches across 13 percent of Warren City, so we plan small pits and pumping where the site is wet.
- Before drilling near Texas Street, we hydrovac expose each marked utility on the bore path, then track and log the drill head as it advances.

What does a bore cross along George Richey Road in Warren City?
FM 2275 runs 1.3 mapped roadway miles inside Warren City. US 271 is 0.1 miles from the limits, while Loop 485 and US 80 are each 0.9 miles away. A bore near these highways needs a route and permit review before equipment is set. George Richey Road is the longest named street in the city at 1.26 miles; Point Pleasant Road runs 1.03 miles, and Texas Street runs 0.84 miles. Boring can keep pavement and driveways uncut where the plan allows.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 2275 | State highway | 1.3 roadway miles inside | State highway office |
| US 271 | Highway nearby | 0.1 miles outside | State highway office |
| Loop 485 | Highway nearby | 0.9 miles outside | State highway office |
| US 80 | Highway nearby | 0.9 miles outside | State highway office |
| Moody Creek | Stream | 1.21 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Victory Branch | Stream nearby | 0.4 miles outside | Checked for Corps of Engineers jurisdiction |
| Campbells Creek | Stream nearby | 0.6 miles outside | Checked for Corps of Engineers jurisdiction |
| Lake Devernia | Lake or pond | 101 acres, nearby | Checked for Corps of Engineers jurisdiction |
| Wood Lake | Lake or pond | 16 acres, nearby | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Warren City or within 1 mile outside it, so the mapped route has no nearby track crossing to plan around. Moody Creek runs 1.21 channel miles in the city, and four mapped street crossings intersect named streams. Lake Devernia and Wood Lake are within 1 mile but outside the city limits. For a Moody Creek bore, we plan channel depth and check for U.S. Army Corps of Engineers jurisdiction.
Who approves work near FM 2275 in Warren City?
FM 2275 is a state highway, so work in its right of way needs a TxDOT utility permit reviewed by the TxDOT Tyler District. The utility that owns the line files through TxDOT’s online RULIS system; we prepare the bore plan and profile and work under that owner’s permit. TxDOT rules require boring or tunneling beneath existing highway pavement, with the bore extending under all travel lanes on rural highways. Warren City streets belong to the incorporated city. A Moody Creek crossing also gets checked for federal waterway jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What is already in the ground in Gregg County near Warren City?
The City of Warren City public water system uses groundwater wells and reports 133 service connections serving 319 people. That is a useful starting point, not a map of every private or public line near George Richey Road. Electric service reported in Gregg County includes Southwestern Electric Power, Rusk County Electric Cooperative and Upshur Rural Electric Cooperative. Before an electric conduit bore, we confirm the line owner for the specific route.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Warren City | Public water system | Groundwater wells | 133 connections, 319 people served |
| Southwestern Electric Power, Rusk County Electric Cooperative and Upshur Rural Electric Cooperative | Electric utilities reporting service in Gregg County and Upshur County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Warren City’s median housing year at 1972; 23 percent of homes were built before 1960, and 7 percent in 2000 or later. That mix can mean replacement work as well as new services along Texas Street. We use hydrovac potholing to expose marked utilities before drilling near them, since locate paint shows position but not depth.

How far is Warren City from Clarksville City and our Yukon office?
Warren City sits in Gregg and Upshur counties, with 88 percent of its area in Gregg County and 12 percent in Upshur County. It covers 1.75 square miles at an elevation of 376 feet, and its ZIP code is 75647. Clarksville City is 1.3 miles southeast; Union Grove is 1.7 miles north; Gladewater is 2.5 miles west. Longview, the Gregg County seat, is 8.6 miles east. The route from our Yukon yard is 335 road miles and about a 6.5 hour drive, so distance affects mobilization.
Places near Warren City
- Directional boring in Clarksville City: 1.3 miles southeast
- Directional boring in Union Grove: 1.7 miles north
- Directional boring in Gladewater: 2.5 miles west
- Directional boring in White Oak: 3.3 miles southeast
- Directional boring in East Mountain: 3.6 miles northeast
Which jobs call for a bore near Texas Street in Warren City?
- Highway crossing: A bore under FM 2275 needs a TxDOT permit plan and a profile that carries beneath the travel lanes.
- Water service: A line near the City of Warren City groundwater well system needs the route checked against existing service lines.
- Fiber conduit: A run along Texas Street can pass beneath pavement without an open cut when the route and entry pits allow.
- Creek crossing: A Moody Creek bore needs planned channel depth and a check for U.S. Army Corps of Engineers jurisdiction.
- Street replacement: Work near George Richey Road can use potholing to find marked utilities before the drill approaches them.
- Long service run: Warren Plant Road is a local route where the footage, access and Cuthbert soil help shape the bore plan.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote work near Warren Plant Road in Warren City?
For a Warren City quote, send the address or map pin, what will go underground, pipe or conduit size and footage; a sketch or plans help. A route on Warren Plant Road or near Moody Creek lets us spot likely crossings and access needs before setting the bore plan.
Price follows the route and scope, not footage alone. Cuthbert soil and sandy clay loam affect drilling and reaming; crossings such as FM 2275 or Moody Creek can add permitting and planning. Pavement, exposed utilities, pits, backfill and excavator time also matter. Warren City is 335 road miles from Yukon, so mobilization is part of the job review, along with any high profile or emergency schedule.
Questions people ask about boring in Warren City
Does Trinity take directional boring work in Gregg County near Warren City, and who staffs it?
Yes. We take Warren City work, and the service model uses our crews or crews from partner drilling contractors we have vetted. Our main office is in Yukon, Oklahoma, and Trinity remains the contact through the bore log. Gregg County accounts for most of Warren City, where FM 2275 and Moody Creek are route details to review.
Does Cuthbert soil near Warren City create a steel corrosion concern, and what pipe can go in?
The USDA soil survey maps high steel corrosion risk across 34 percent of Warren City, including areas with Cuthbert soil. The line owner should consider casing and tracer wire materials for the specific route. HDPE does not have the same soil corrosion concern. We review the material and alignment near streets such as George Richey Road before work is set.
What ground does a bore pass through in Warren City around Cuthbert soil?
Cuthbert fine sandy loam is mapped across 30 percent of Warren City, and Bowie fine sandy loam across 26 percent. At about 40 inches down, sandy clay loam is mapped under 80 percent of the area. The survey is a mapped guide, not a test boring, so a route near Moody Creek still needs site specific planning.
Will a Warren City bore hit rock beneath FM 2275?
When planning a Moody Creek crossing, we treat Warren City’s mapped lack of bedrock in the top five feet as no promise about deeper rock. The geologic map identifies Queen City Sand, a Lutetian unit with sand, siltstone and claystone. We plan for changing material along an FM 2275 route rather than treating the map as a subsurface test.
Who approves a Warren City bore under FM 2275, and which state office reviews it?
The utility owner applies for a TxDOT utility permit through RULIS for work in the FM 2275 right of way. The TxDOT Tyler District reviews it, and we prepare the bore plan and profile for the owner’s application. Existing highway pavement is bored or tunneled beneath, with the required cover and alignment addressed in the permit.
Can a line be bored under Moody Creek in Warren City?
A bore under Moody Creek can be planned, but the route needs a channel depth plan and a check for U.S. Army Corps of Engineers jurisdiction. The creek has 1.21 channel miles in Warren City, and four mapped street crossings intersect named streams. Site access and soil near the banks shape the entry and exit pit plan.
How far is Warren City near Gladewater from the Yukon office, and does that affect a job?
Warren City is 335 road miles and about a 6.5 hour drive from our Yukon, Oklahoma main office. Gladewater is 2.5 miles west of Warren City. That distance affects mobilization planning, especially if a job near FM 2275 needs special equipment, excavator time or an emergency response.
How much 811 notice is needed for a Warren City bore near George Richey Road, and what if marks move?
Count back at least two working days from the planned start for a Texas811 locate request; Saturdays, Sundays and legal holidays do not count. The request cannot be made earlier than 14 days before excavation, and it has a 20 day life. If the start slips past that window or marks wear off or move near George Richey Road, request new or refreshed marks before work continues.
How do TxDOT Tyler District permitting and FM 2275 crossing conditions affect our directional boring costs in Warren City?
The route and scope determine the price. Factors include length, pipe size, Cuthbert soil, utilities to expose, pavement, creek crossings, pits, backfill and equipment time. Work in the FM 2275 right of way adds permit planning, while Warren City’s 335 road miles from Yukon affect mobilization. High profile or emergency scheduling can also change the work plan.
Where the Warren City facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Warren City
- U.S. Census Bureau, TIGER/Line 2024: Warren City boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Warren City
- U.S. Census Bureau, American Community Survey 2019 to 2023: Warren City housing units and year built
- Macrostrat geologic map compilation: map units under Warren City
- U.S. EPA Safe Drinking Water Information System: public water systems serving Warren City
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Gregg County and Upshur County
- U.S. Geological Survey, Elevation Point Query Service: Warren City elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Warren City
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Warren City
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Warren City, Texas
Type the address of your job in Warren City. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Warren City
Same county: Longview · Kilgore · Lake Cherokee · Liberty City · Lakeport · Easton. All counties: Texas county list.
