Milford Texas Directional Boring: Austin Soil, US 77 and Mill Creek
Quick Answer: Can we bore beneath Mill Creek or US 77 in Milford without cutting the surface? Yes, we use directional boring, also called horizontal directional drilling (HDD), for crossings such as US 77 in Milford, Texas. Our Yukon, Oklahoma office is 267 road miles from Mill Creek in Milford, so distance is part of planning. The USDA soil survey maps Austin silty clay across much of town, and sticky clay can grip a pipe during pullback. We match the bore plan to your route along Main Street or another local crossing.
Milford bores at a glance
- Incorporated city in Ellis County, Texas. Population 801 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 267 miles, about 5.2 hours of driving.
- Ground: Austin soil is mapped on 67 percent of the area, with bedrock about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 76 percent of the area.
- Highways inside the boundary: US 77, FM 308 and FM 566. State permit office: TxDOT Dallas District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Mill Creek and Richland Creek.
- Public water: City of Milford, surface water bought from another system.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring in Milford and Ellis County?
We take directional boring work in Milford, Ellis County, where the Census Bureau Vintage 2024 estimate puts the population at 801. We install water, sewer, gas, electric conduit and fiber lines, including routes along Main Street or connections crossing US 77. Tell us what line you need and where it has to go, and we can plan around the street or highway crossing.
Our main office is in Yukon, Oklahoma, and Milford work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business that started in 1965, and we have done directional boring since 1982. Our work ranges from 3/4 inch service lines to 48 inch casing, a fit for routes from Main Street services to larger crossings.

What is Milford ground like in Austin soil?
The USDA soil survey maps Austin soil across 67 percent of Milford and Houston Black across 16 percent. Silty clay is the surface texture on 80 percent of the mapped area, with clay on 16 percent. About 40 inches down, the survey maps bedrock in 76 percent of the area, clay in 16 percent and silty clay in 6 percent. These are mapped soil patterns, not test borings, so the actual route near Main Street still needs to be evaluated. Clay can hold an open hole, but it can also stick to a reamer and grip pipe.
| USDA soil survey, inside the Milford city limits | What is mapped |
|---|---|
| Soil series mapped | Austin 67 percent, Houston Black 16 percent, Stephen 7 percent and Lewisville 4 percent |
| Texture at the surface | silty clay 80 percent and clay 16 percent |
| Texture about 40 inches down | bedrock 76 percent, clay 16 percent and silty clay 6 percent |
| Engineering class about 40 inches down | fat clay (CH) 24 percent |
| Average clay content about 40 inches down | 50 percent |
| Bedrock mapped within 60 inches | 76 percent of the area (0 percent hard rock, 76 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 2 percent of the area |
| High corrosion risk for uncoated steel | 96 percent of the area |
Bedrock is mapped within 40 inches across 76 percent of Milford, and the mapped bedrock is weathered rather than hard. The local geologic map names Austin Chalk, a Late Cretaceous unit; chalk can slow drilling compared with dirt. No seasonal water table is mapped within 60 inches, while flood prone soils cover 2 percent of the area, a point to check near Mill Creek. High steel corrosion risk is mapped across 96 percent, so the line owner should consider casing and tracer wire materials; HDPE is not subject to that soil corrosion concern.
What does it take to bore Milford bedrock?
Austin silty clay and shallow weathered bedrock call for a route specific plan in Milford. We track the drill head from the surface and log depth and pitch as the bore advances near streets such as Water Street.
- On Austin silty clay routes near Main Street, we use thinner drilling fluid and staged reaming to keep sticky soil from loading the reamer.
- Where Milford’s mapped weathered bedrock is near the surface, we plan for slower drilling and keep checking the drill head’s depth and pitch.
- Before drilling near a marked line on Water Street, we expose it with hydrovac potholing because surface paint does not show its depth.
- For a Mill Creek crossing, we plan the bore below the channel and check whether the crossing falls under U.S. Army Corps of Engineers jurisdiction.

What is in the way of a new line across Milford near Mill Creek?
US 77 runs 1.7 mapped roadway miles inside Milford, while FM 308 accounts for 1.2 miles and FM 566 for 0.7 miles. Interstate 35 runs along or touches the town limits, so a route there may involve TxDOT right of way. Main Street is the longest named street at 1.24 miles, followed by Frank’s Road at 1.38 miles and Water Street at 1.02 miles. A bore can pass beneath pavement rather than opening a trench across these routes.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 77 | US highway | 1.7 roadway miles inside | State highway office |
| FM 308 | State highway | 1.2 roadway miles inside | State highway office |
| FM 566 | State highway | 0.7 roadway miles inside | State highway office |
| Interstate 35 | Highway nearby | Runs along or touches the city limits | State highway office |
| Texas State Highway 77 | Highway nearby | 0.9 miles outside | State highway office |
| Mill Creek | Stream | 0.88 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Richland Creek | Stream | 0.61 channel miles inside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Milford or within one mile outside its limits, and public records map no street and rail crossings. Mill Creek runs 0.88 channel miles through town and Richland Creek runs 0.61 miles; two mapped street crossings cross named streams. Those creek approaches need a route that stays below the channel. No lakes or ponds are mapped within one mile, so the crossing plan can focus on the creeks and the streets that meet them.
Do I need a permit to bore under US 77 in Milford?
For a bore in US 77, FM 308, FM 566 or Interstate 35 right of way, the utility owner applies for a TxDOT utility permit through RULIS, and the TxDOT Dallas District reviews it. We prepare the bore plan and profile for the owner’s application and work under the permit issued to that owner. TxDOT requires boring or tunneling beneath existing highway pavement; crossings are encased, and rural highway bores extend beneath all travel lanes. Cover requirements depend on the line type, with the permit able to set a different depth.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns the lines near the City of Milford water system?
The City of Milford public water system uses purchased surface water and serves 796 people through 351 service connections. For electric service in Ellis County, Oncor Electric Delivery Company, HILCO Electric Cooperative, Navarro County Electric Cooperative and United Electric Cooperative Service report service. That countywide list does not identify the provider at every address, so we confirm the line owner before planning an electric conduit bore near Water Street.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Milford | Public water system | Surface water bought from another system | 351 connections, 796 people served |
| Oncor Electric Delivery Company, HILCO Electric Cooperative, Navarro County Electric Cooperative and United Electric Cooperative Service | Electric utilities reporting service in Ellis County | EIA Form 861 | Confirm the line owner by address |
We use Milford’s 1953 median housing year as background when planning underground work near West Avenue. We use Milford’s housing mix for residential boring context: 53 percent of homes were built before 1960, 32 percent between 1960 and 1999, and 15 percent in 2000 or later. Older service lines along Main Street may need replacement, while newer construction can call for a new service route. Before the drill approaches, we hydrovac expose every marked utility on its path; near Water Street, paint alone cannot show a line’s depth.

How far is Milford from Italy and the areas we cover?
Milford is in Ellis County, at an elevation of 639 feet, and covers 2.46 square miles. ZIP code 76670 serves the town. Mertens is 5.4 miles southeast, Italy is 5.9 miles northeast, Carl’s Corner is 6.6 miles southwest, and Frost is 8.8 miles east. Hillsboro, the nearest larger city, is 12.5 miles southwest; Waxahachie, the county seat, is 20.4 miles north. The Yukon, Oklahoma main office is 267 road miles away, a 5.2 hour drive, so distance affects mobilization for a Milford job.
Places near Milford
- Directional boring in Mertens: 5.4 miles southeast
- Directional boring in Italy: 5.9 miles northeast
- Directional boring in Carl’s Corner: 6.6 miles southwest
- Directional boring in Frost: 8.8 miles east
- Directional boring in Bynum: 11 miles south
- Directional boring in Hillsboro: 12.5 miles southwest
Which jobs call for a bore near Milford Main Street?
- Highway crossing: A bore under US 77 can pass beneath the pavement and travel lanes without opening a trench across the road.
- Water service: A new service near the City of Milford system can be routed beneath Main Street rather than cut across its pavement.
- Fiber conduit: A route along Water Street can carry fiber conduit below the street surface and marked utilities.
- Creek crossing: A Mill Creek bore can stay below the channel while keeping the creek bank uncut.
- Street replacement: A replacement line near Crossmain Street can pass beneath pavement and driveways instead of trenching across them.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a bore near Milford Crossmain Street?
For a quote near Crossmain Street, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help. That lets us see whether the route crosses a street, US 77 or one of Milford’s creeks before we work out the bore approach.
The route details shape the price, not footage alone. Ground conditions matter: Austin silty clay can grip pipe, and mapped shallow weathered bedrock may slow the bore. Crossings matter too, including pavement on US 77, marked utilities to expose, or a Mill Creek approach. Pit work, excavator time, backfill and the size of the pipe or casing also change the job. Mobilization is part of the picture because Milford is 267 road miles from Yukon.
Questions people ask about boring in Milford
Does Trinity Boring Solutions take jobs in Milford, Ellis County, and who does the work?
Yes. We take directional boring work in Milford, Ellis County, and keep the customer relationship with Trinity from the first call through the bore log. The job may be handled by our own crews or a partner contractor from a satellite yard that Trinity has vetted. That staffing model serves routes such as US 77 crossings.
Who owns electric lines in Milford, Ellis County, and who confirms conduit specs?
The line owner depends on the address. Oncor Electric Delivery Company, HILCO Electric Cooperative, Navarro County Electric Cooperative and United Electric Cooperative Service report electric service in Ellis County. We confirm the specific owner and conduit requirements before planning a bore, including a route along Frank’s Road.
Can Milford city streets like Water Street be bored under without cutting them?
Yes. As an incorporated town in Ellis County, we treat Main Street as a city street when planning a bore. Directional boring can carry a line beneath Water Street without cutting the pavement, subject to the route and utility locations. We expose marked utilities on the bore path before the drill gets near them.
Do older homes near Milford Main Street need replacement bores?
They may. The American Community Survey 2019 to 2023 estimates say 53 percent of Milford homes were built before 1960, and the median year built is 1953. An older service near Main Street may need replacement, while a new connection needs its own route plan and utility exposures.
Does Austin soil in Milford corrode steel, and what pipe should I use?
The USDA soil survey maps high steel corrosion risk across 96 percent of Milford. The line owner should consider casing and tracer wire materials for a route through Austin soil. HDPE is not subject to that soil corrosion concern, but the owner selects the materials for the line.
What ground will a directional bore pass through in Milford Austin soil?
The USDA soil survey maps Austin soil across 67 percent of Milford, with silty clay the dominant surface texture. At about 40 inches below the surface, bedrock is mapped across 76 percent of the town and clay across 16 percent. Those are mapped patterns, not test borings, so the exact route matters.
How much Texas811 notice do I need for a Milford bore near Frank’s Road?
Request the Texas811 locate at least 48 hours before digging, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before the start. If the start slips more than 14 days past the original notice for a Frank’s Road bore, make a new request. Along FM 308, we refresh worn or moved marks through Texas811 before boring work in Milford continues.
How far is Milford from Hillsboro and does the Yukon drive affect the job?
Hillsboro is 12.5 miles southwest of Milford, while the Yukon, Oklahoma main office is 267 road miles away, a 5.2 hour drive. That distance can affect mobilization for a bore near US 77. The route, equipment and schedule help determine how the job is staffed.
What affects the cost of directional boring in Milford under US 77?
If work in Milford includes US 77, we set the price from that crossing’s job scope. Factors include bore length, pipe or conduit size, Austin soil and weathered bedrock, utility crossings and potholing, pavement, creek approaches, pits and backfill. A US 77 crossing may require a different plan from a short Water Street service, and mobilization from Yukon also affects the job.
Where the Milford facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Milford
- U.S. Census Bureau, TIGER/Line 2024: Milford boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Milford
- U.S. Census Bureau, American Community Survey 2019 to 2023: Milford housing units and year built
- Macrostrat geologic map compilation: map units under Milford
- U.S. EPA Safe Drinking Water Information System: public water systems serving Milford
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Ellis County
- U.S. Geological Survey, Elevation Point Query Service: Milford elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Milford
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Milford
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Milford, Texas
Type the address of your job in Milford. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Milford
Same county: Waxahachie · Midlothian · Ennis · Red Oak · Glenn Heights · Ovilla · Ferris · Palmer · Oak Leaf · Maypearl · Garrett · Venus. All counties: Texas county list.
