Kingsbury Texas Directional Boring: Crockett Soil, Interstate 10 And Nash Creek
Quick Answer: Crockett soil and clay mapped around Kingsbury can hold a hole open, then grip the reamer and pipe. We take directional boring, also called horizontal directional drilling (HDD), work in Texas for routes beneath Interstate 10 and Prairie-Lea Road. Kingsbury is 454 road miles from our Yukon, Oklahoma main office, and Nash Creek makes creek crossings part of route planning. At about 40 inches, the USDA soil survey maps clay across 33 percent of the area, so we control fluid and ream in stages.
Kingsbury bores at a glance
- Incorporated city in Guadalupe County, Texas. Population 143 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 454 miles, about 8.5 hours of driving.
- Ground: Crockett soil is mapped on 27 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 31 percent of the area.
- Highways inside the boundary: Interstate 10, US 90 and FM 1104. State permit office: TxDOT San Antonio District.
- Railroad track inside the boundary: Union Pacific.
- Named streams inside the boundary: Nash Creek, Brushy Creek, Highsmith Creek and Wolf Creek.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring in Kingsbury near Prairie-Lea Road?
Crockett soil can stay around the bit and grip a pulled pipe, so we plan each Kingsbury route around the ground and access. The Census Bureau Vintage 2024 estimate puts the city population at 143, within Guadalupe County. For routes along Jackson Road or Rocky Lane, we install water, sewer, gas, electric conduit and fiber, with the bore alignment and size matched to the line and site.
Our main office is in Yukon, Oklahoma, and Kingsbury work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and we have done directional boring since 1982, bringing that experience to planned Kingsbury work. On a Prairie-Lea Road route, our equipment range runs from 3/4 inch service lines to 48 inch casing, depending on the job.

What kind of ground does Crockett soil mean for a Kingsbury bore?
The USDA soil survey maps Crockett as the largest named soil series in Kingsbury, at 27 percent of the area; Vernia accounts for 26 percent. Around 40 inches below the surface, clay is mapped across 33 percent, very gravelly loamy fine sand across 26 percent, and sandy clay loam across 11 percent. Average clay content at that depth is 27 percent. For Kingsbury, we use these mapped patterns for planning, not as test borings. A route near Prairie-Lea Road may encounter sticky clay or loose, gravelly material, so the bore plan has to fit the alignment.
| USDA soil survey, inside the Kingsbury city limits | What is mapped |
|---|---|
| Soil series mapped | Crockett 27 percent, Vernia 26 percent, Mabank 11 percent, Robco 11 percent and Quihi 7 percent |
| Texture at the surface | very gravelly loamy fine sand 26 percent, loam 22 percent and fine sandy loam 14 percent |
| Texture about 40 inches down | clay 33 percent, very gravelly loamy fine sand 26 percent and sandy clay loam 11 percent |
| Engineering class about 40 inches down | fat clay (CH) 28 percent, lean clay (CL) 28 percent and silty gravel (GM) 26 percent |
| Average clay content about 40 inches down | 27 percent |
| Bedrock mapped within 60 inches | 31 percent of the area (0 percent hard rock, 31 percent weathered rock) |
| Seasonal water table within 60 inches | 14 percent of the area |
| Flood prone soils | 3 percent of the area |
| High corrosion risk for uncoated steel | 64 percent of the area |
The USDA soil survey maps bedrock within 60 inches across 31 percent of Kingsbury, and that mapped bedrock is weathered; hard bedrock is not mapped within that depth. Seasonal water tables are mapped within 60 inches across 14 percent, while flood prone soils account for 3 percent. Pits near Nash Creek need attention if water enters them. High steel corrosion risk is mapped across 64 percent, a concern for uncoated casing or tracer wire that the line owner should consider. The geologic map names the Pliocene Willis Formation, described as including clay, silt, sand and gravel, so a route can face changing material.
How do we bore Kingsbury clay near Prairie-Lea Road?
Kingsbury soil mapping shows both clay and gravelly ground. We choose the drilling fluid and reaming sequence for the material on the route, then track the head as the bore advances.
- In Crockett soil, clay can stick to the reamer and grip the pipe, so we use controlled fluid, open the hole in stages and plan the pull.
- Where the USDA survey maps very gravelly loamy fine sand, we build support for loose ground and have the pipe ready before the final ream.
- Near mapped weathered bedrock, we expect slower progress than in soil and keep checking the drill head as ground conditions change.
- For a Nash Creek route, we plan pits around possible water and set the crossing depth to pass beneath the channel.

What is in the way of a new Kingsbury line near Union Pacific?
Interstate 10 has 6.4 mapped roadway miles inside Kingsbury, while US 90 has 0.3 miles and FM 1104 has 2.3 miles. A route beneath existing highway pavement needs boring or tunneling rather than an open cut. Among named local streets, Prairie-Lea Road runs 1.67 miles in the city, Jackson Road 1.33 miles and Rocky Lane 0.75 miles. These routes can bring pavement, driveway and existing utility conflicts into the bore plan, so the proposed path and access matter.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Interstate 10 | Interstate | 6.4 roadway miles inside | State highway office |
| US 90 | US highway | 0.3 roadway miles inside | State highway office |
| FM 1104 | State highway | 2.3 roadway miles inside | State highway office |
| Union Pacific | Railroad | 0.03 track miles inside | The railroad |
| Nash Creek | Stream | 0.85 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Brushy Creek | Stream | 0.15 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Highsmith Creek | Stream | 0.08 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Wolf Creek | Stream | 0.03 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Red Branch | Stream nearby | 0.5 miles outside | Checked for Corps of Engineers jurisdiction |
| Long Branch | Stream nearby | 0.5 miles outside | Checked for Corps of Engineers jurisdiction |
| York Creek | Stream nearby | 0.9 miles outside | Checked for Corps of Engineers jurisdiction |
| Randolph Branch Mill Creek | Stream nearby | 1 miles outside | Checked for Corps of Engineers jurisdiction |
Union Pacific has 0.03 track miles inside Kingsbury on the Glidden Subdivision, and Amtrak uses the track. Public mapping shows no street and rail crossings inside the limits, but a proposed crossing still needs coordination with the railroad. Nash Creek runs 0.85 channel miles in the city; Brushy Creek, Highsmith Creek and Wolf Creek also cross the limits. Mapping shows two street crossings of named streams. We plan routes in Kingsbury with the mapped fact that no lakes or ponds are within one mile.
Who has to sign off on a Kingsbury bore in Guadalupe County?
Since Kingsbury is incorporated, we account for city ownership when planning work beneath its streets. For work in the right of way of Interstate 10, US 90 or FM 1104, TxDOT requires a utility permit reviewed by its San Antonio District. The utility owner files through RULIS; we prepare the bore plan and profile and work under that owner’s permit. For Kingsbury crossings beneath existing highway pavement, we follow TxDOT rules calling for boring or tunneling. A Union Pacific track crossing needs an agreement with the railroad, and Nash Creek crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns or serves buried lines in Kingsbury, Guadalupe County?
The water provider for a specific Kingsbury address must be confirmed with the city, county or local water district before a bore is planned. County electric service reporters include AEP Texas Central, the City of New Braunfels, the City of San Antonio, the City of Seguin, Bluebonnet Electric Cooperative, Guadalupe Valley Electric Cooperative and Pedernales Electric Cooperative. None should be assumed to serve every address. Before a conduit route near Jackson Road, we confirm the line owner and hydrovac pothole marked utilities because paint shows position, not depth.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| AEP Texas Central, City of New Braunfels, City of San Antonio, City of Seguin, Bluebonnet Electric Cooperative, Guadalupe Valley Electric Cooperative and Pedernales Electric Cooperative | Electric utilities reporting service in Guadalupe County | EIA Form 861 | Confirm the line owner by address |
We use Kingsbury’s median housing year of 2000 from the American Community Survey 2019 to 2023 five year estimates as context for underground planning. We use Kingsbury’s survey estimates for underground planning: 5 percent built before 1960, 45 percent from 1960 to 1999 and 50 percent in 2000 or later. Those housing dates do not establish the age of buried lines. On a replacement route near Baker Road, we expose marked utilities before the drill approaches, so the planned bore can account for what is actually in the path.

What is near Kingsbury, including Geronimo?
Kingsbury is in Guadalupe County, at an elevation of 594 feet, and covers 2.58 square miles. Its ZIP code is 78638. Staples is 7.8 miles north, Geronimo is 9.1 miles west, Seguin is 9.9 miles southwest and Luling is 10.6 miles east. Seguin is the county seat and the nearest larger city. Interstate 10 crosses Kingsbury, which is 454 road miles and an 8.5 hour drive from our Yukon, Oklahoma main office; that distance is part of planning a crew mobilization.
Places near Kingsbury
- Directional boring in Staples: 7.8 miles north
- Directional boring in Geronimo: 9.1 miles west
- Directional boring in Seguin: 9.9 miles southwest
- Directional boring in Luling: 10.6 miles east
- Directional boring in Redwood: 12.3 miles northwest
What boring work comes up in Kingsbury near Rocky Lane?
- Highway crossing: A bore beneath Interstate 10 needs a route and installation plan suited to the highway pavement and its right of way.
- Street service: A water or sewer line along Prairie-Lea Road can be bored beneath pavement, with marked utilities exposed along the route.
- Fiber conduit: A fiber route near Jackson Road needs its line owner confirmed before the conduit path is finalized.
- Creek crossing: A Nash Creek bore needs a planned path beneath the channel and a check for federal waterway jurisdiction.
- Rail crossing: A proposed line beneath Union Pacific track needs the railroad’s agreement before the crossing plan is set.
- Electric conduit: Near Rocky Lane, we confirm the electric line owner and pothole marked utilities before drilling close to them.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a Kingsbury bore near Baker Road?
For a Baker Road quote, send the address or map pin, what is going in the ground, pipe or conduit size, footage, and any sketch or plans. The proposed route matters in Kingsbury: tell us if it crosses pavement, a marked utility, Union Pacific track or a creek, so we can assess the actual work.
The 454 road miles from Yukon make mobilization part of planning a Kingsbury job. Crockett soil and the mapped clay and gravelly ground affect drilling and reaming choices. A route beneath Interstate 10 or Union Pacific track brings crossing coordination into the scope, while Nash Creek adds a water crossing to assess. Price also reflects bore length, line size, exposed utilities, pavement, pits, excavator time, sand backfill and whether the work is high profile or an emergency.
Questions people ask about boring in Kingsbury
Does Trinity Boring Solutions take Kingsbury jobs in Guadalupe County, and who staffs them?
Yes. We take directional boring work across Texas, including Kingsbury, and plan each project around its scope. Our crews do the work, including crews operating from partner contractor satellite yards that Trinity has vetted. You deal with Trinity from the first call through the bore log, whether the job is near Prairie-Lea Road or elsewhere in Guadalupe County.
How old are Kingsbury homes and buried lines near Jackson Road?
The American Community Survey 2019 to 2023 estimates put the median housing year in Kingsbury at 2000, but that does not date buried utilities near Jackson Road. Replacement work starts with identifying and exposing marked lines on the proposed path. That gives the bore plan a view of actual utility positions before drilling near them.
Could groundwater or flooding affect bore pits near Kingsbury’s Nash Creek?
It could. The USDA soil survey maps seasonal water tables within 60 inches across 14 percent of Kingsbury and flood prone soils across 3 percent. Near Nash Creek, we plan pit locations and depth with water conditions in mind. A creek crossing is also checked for U.S. Army Corps of Engineers jurisdiction during planning.
Does Kingsbury Crockett soil corrode steel, and what pipe can go in the bore?
The USDA soil survey maps high steel corrosion risk across 64 percent of Kingsbury, including areas with Crockett soil. That is a concern for uncoated steel casing or tracer wire, so the line owner selects suitable materials or coatings. We account for HDPE in Kingsbury planning, since it is not affected by soil corrosion. The right choice depends on the line and its owner.
What ground will a Kingsbury bore pass through in Crockett soil?
Crockett is mapped across 27 percent of Kingsbury. At about 40 inches below the surface, clay covers 33 percent of the mapped area, very gravelly loamy fine sand 26 percent, and sandy clay loam 11 percent. The pattern is not a test of a specific route, so ground along a Jackson Road bore can differ from the map.
Is there rock in Kingsbury, and how much is mapped within five feet?
The USDA soil survey maps bedrock within 60 inches across 31 percent of Kingsbury, and the mapped material is weathered. We plan in Kingsbury using the map, where hard bedrock is not mapped within that depth. That does not rule out different material along a particular bore, so we account for the route and monitor the drill head as it advances.
Does Trinity cover Kingsbury, Staples and rural sites outside town?
Yes. We take work across Texas, including Kingsbury, nearby Staples and rural sites outside the city limits. The Yukon main office is 454 road miles from Kingsbury, so the route, equipment and mobilization needs are part of planning each job. From the first call through the bore log, we stay involved in Kingsbury projects and keep the work coordinated.
How much 811 notice does a Kingsbury bore near Prairie-Lea Road need?
Texas811 needs a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If a Kingsbury start slips more than 14 days past the original notice, we submit a new request. Marks near Prairie-Lea Road that wear off or move must be refreshed through Texas811 before work continues.
What affects the cost of a directional bore in Kingsbury near Interstate 10?
For Kingsbury work, we set the price from the job scope and keep the estimate tied to the planned work. Length, pipe or conduit size, Crockett soil conditions, exposed utilities, pavement and crossings all matter. An Interstate 10 or Union Pacific crossing adds coordination to the plan, and Nash Creek may affect the route. Pits, excavator time, sand backfill, emergency work and mobilization from Yukon also shape the quote.
Where the Kingsbury facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Kingsbury
- U.S. Census Bureau, TIGER/Line 2024: Kingsbury boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Kingsbury
- U.S. Census Bureau, American Community Survey 2019 to 2023: Kingsbury housing units and year built
- Macrostrat geologic map compilation: map units under Kingsbury
- U.S. Department of Transportation, North American Rail Network: track owners in Guadalupe County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Guadalupe County
- U.S. Geological Survey, Elevation Point Query Service: Kingsbury elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Kingsbury
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Kingsbury
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Kingsbury, Texas
Type the address of your job in Kingsbury. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Kingsbury
Same county: Cibolo · Schertz · New Braunfels · Selma · McQueeney · Lake Dunlap · Marion · Santa Clara · New Berlin · Zuehl. All counties: Texas county list.
