Deport Texas Directional Boring: Leson Clay, Mustang Creek and US 271
Quick Answer: Mustang Creek and US 271 are the crossings to plan around; Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Deport, Texas. Deport is 252 road miles from the Yukon, Oklahoma main office, with Jeffus Street and FM 1149 among the routes a bore may follow. Leson soil covers 40 percent of the mapped area, and heavy clay can cling to the reamer and swell around pipe. We stage reaming and watch fluid returns so pressure does not lift pavement along US 271.
Deport bores at a glance
- Incorporated city in Lamar County and Red River County, Texas. Population 550 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 252 miles, about 4.9 hours of driving.
- Ground: Leson soil is mapped on 40 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 2 percent of the area.
- Highways inside the boundary: US 271, US 271 Business, FM 1149 and FM 1503. State permit office: TxDOT Paris District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Mustang Creek.
- Public water: City of Deport, surface water bought from another system.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who handles directional boring in Deport near Mustang Creek?
In Deport, Lamar County, the Census Bureau Vintage 2024 estimate puts the population at 550. We take water, sewer, gas, electric conduit and fiber work, including bores routed along Jeffus Street or toward the City of Deport water system. The route and existing lines decide how we set up each bore.
Our main office is in Yukon, Oklahoma, and Deport work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. With no utility strike in over 25 years, we plan around lines such as the City of Deport water system and electric facilities reported in Lamar County. Our family business started in 1965, and we have done directional boring since 1982; our Yukon main office is 252 road miles from Deport.

What does the soil survey show about Deport and Leson soil?
The USDA soil survey maps Leson across 40 percent of Deport, with Wilson soil at 33 percent and Burleson soil at 12 percent. Leson clay and Burleson clay are part of a ground pattern that can hold an open hole but stick to the reamer. At the surface, 56 percent of the mapped area is clay and 42 percent is silt loam. About 40 inches down, 91 percent is mapped as clay, with an average clay content of 47 percent. We treat Leson, Wilson, Burleson, and Lassiter as mapped soil patterns rather than test borings when planning work in Deport.
| USDA soil survey, inside the Deport city limits | What is mapped |
|---|---|
| Soil series mapped | Leson 40 percent, Wilson 33 percent, Burleson 12 percent, Lassiter 9 percent and Houston Black 3 percent |
| Texture at the surface | clay 56 percent and silt loam 42 percent |
| Texture about 40 inches down | clay 91 percent and silt loam 9 percent |
| Engineering class about 40 inches down | fat clay (CH) 91 percent and lean clay (CL) 9 percent |
| Average clay content about 40 inches down | 47 percent |
| Bedrock mapped within 60 inches | 2 percent of the area (0 percent hard rock, 2 percent weathered rock) |
| Seasonal water table within 60 inches | 10 percent of the area |
| Flood prone soils | 9 percent of the area |
| High corrosion risk for uncoated steel | 100 percent of the area |
The USDA soil survey maps bedrock within 60 inches in 2 percent of Deport, while typical bedrock depth is 52 inches. Seasonal water tables are mapped within 60 inches in 10 percent, and flood prone soils cover 9 percent, so pits near Mustang Creek need a wet ground plan. High steel corrosion risk is mapped across the area; the line owner should consider casing and tracer wire materials. Fine Silty Clay Decomposition Residuum is Cenozoic, while Pecan Gap Chalk is Late Cretaceous, so deeper routes may meet different materials.
How do we bore Deport clay without lifting pavement?
Leson soil and the heavy clay mapped about 40 inches down call for controlled fluid and staged reaming. Along US 271, we also watch returns closely so the bore does not push pressure up under pavement.
- With Leson and Burleson clay mapped around Deport, we use fluid suited to sticky ground, ream in stages and plan to pull pipe soon after opening the hole.
- Near US 271 pavement, we keep fluid pressure controlled and watch returns so the clay does not build enough pressure to lift the surface.
- At a Mustang Creek crossing, we plan the bore depth beneath the channel and check whether the crossing falls under Corps jurisdiction.
- Before a bore near Monroe Street, we hydrovac marked utilities on the path; paint shows where a line is, not its depth.

Where might a Deport line go under Jeffus Street?
US 271 runs 1.1 mapped roadway miles inside Deport, while US 271 Business accounts for 1.0 mile. FM 1149 and FM 1503 also run within the limits, so a route near a state highway needs its own crossing plan. Jeffus Street is the longest named street at 0.97 miles, followed by Monroe Street at 0.58 miles and Depot Street at 0.5 miles. A bore can pass beneath pavement rather than cut across a street, but the route and the existing lines set pit locations.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 271 | US highway | 1.1 roadway miles inside | State highway office |
| US 271 Business | US highway | 1 roadway miles inside | State highway office |
| FM 1149 | State highway | 0.7 roadway miles inside | State highway office |
| FM 1503 | State highway | 0.3 roadway miles inside | State highway office |
| Mustang Creek | Stream | 1.11 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Lake Drain Creek | Stream nearby | 0.4 miles outside | Checked for Corps of Engineers jurisdiction |
| Brushy Creek | Stream nearby | 0.6 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Deport or within one mile outside the limits, so there is no local track crossing identified in these records. Mustang Creek runs 1.11 channel miles through the city, and mapped street crossings of named streams total three. Lake Drain Creek is 0.4 miles from the limits and Brushy Creek is 0.6 miles away. Creek work needs a route planned beneath the channel, with the crossing checked for federal water jurisdiction.
Who permits a Deport bore under US 271?
For a utility crossing under US 271, TxDOT rules set at least 60 inches of cover below the lowest crossed grade for electric, communication and water lines, and pressurized sewer lines. Along highway right of way, electric and communication lines need 48 inches of cover and water lines need 36 inches; the permit can set another depth. The utility owner applies through TxDOT’s RULIS system, and the TxDOT Paris District reviews it. We prepare the bore plan and profile for the owner’s application. Existing highway pavement is bored or tunneled, and Mustang Creek is checked for Corps jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities serve Deport and Lamar County?
The City of Deport public water system uses purchased surface water and serves 547 people through 231 service connections. At a route near Depot Street, that system is one of the buried utilities to locate before a new service or replacement bore. Electric service reported in Lamar County includes Oncor Electric Delivery Company, Texas-New Mexico Power, Fannin County Electric Cooperative and Lamar County Electric Cooperative Association. Before planning an electric conduit bore near Jeffus Street, we confirm the line owner for the specific address.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Deport | Public water system | Surface water bought from another system | 231 connections, 547 people served |
| Oncor Electric Delivery Company, Texas-New Mexico Power, Fannin County Electric Cooperative and Lamar County Electric Cooperative Association | Electric utilities reporting service in Lamar County and Red River County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Deport’s median housing year at 1975; 19 percent of housing was built before 1960, and 75 percent from 1960 to 1999. A replacement route near Monroe Street may pass older buried services, while a new connection has to meet the lines already there. We hydrovac marked utilities along the bore path before drilling near them, since surface paint gives position but not depth.

Where is Deport in relation to Detroit and Paris?
Deport covers 1.11 square miles in Lamar and Red River counties, with 87 percent of the city in Lamar County. Its elevation is 424 feet, and ZIP code 75435 serves the area. Bogata is 7.3 miles southeast, Detroit is 9.5 miles north, and Blossom is 10.0 miles north. Paris, the county seat and nearest larger city, is 16.3 miles northwest. From our Yukon, Oklahoma yard, the drive is 252 road miles and 4.9 hours, so the distance is part of planning equipment mobilization for a Deport job.
Places near Deport
- Directional boring in Bogata: 7.3 miles southeast
- Directional boring in Detroit: 9.5 miles north
- Directional boring in Blossom: 10 miles north
- Directional boring in Sun Valley: 11.7 miles northwest
- Reno: 13.3 miles northwest
- Directional boring in Paris: 16.3 miles northwest
What would we bore near Depot Street in Deport?
- Highway crossing: A bore beneath US 271 can keep the roadway surface intact, with the utility owner’s TxDOT permit and required cover guiding the profile.
- Creek crossing: A route beneath Mustang Creek needs depth planning for the channel and a check for Corps jurisdiction during planning.
- Water service: A connection near the City of Deport water system needs a route checked against existing service lines and the local water main.
- Street replacement: A bore along Jeffus Street can pass beneath pavement, with potholing used to confirm the depth of marked utilities.
- Fiber conduit: A conduit route near FM 1149 needs the line owner confirmed and any highway right of way crossing planned for TxDOT review.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for a Deport bore near Read Street?
For a Deport quote, send the address or map pin, what is going in the ground, the pipe or conduit size and footage; a sketch or plans help. A pin along Read Street or near Mustang Creek helps us see the route and identify the crossings that can change the bore plan.
The mapped heavy clay is the first cost factor because it can stick to the reamer and call for staged passes and careful fluid control. Next, we look at crossings and exposures, including US 271, pavement and Mustang Creek. Pipe size, bore length, pits, excavator time and sand backfill also shape the work. The 252 road miles from Yukon affect mobilization, and high profile or emergency timing can add planning demands.
Questions people ask about boring in Deport
Does Trinity take directional boring jobs in Deport and Lamar County?
Yes. We take directional boring work in Deport and across Texas, with the job staffed by our own crews or a satellite yard run by a partner drilling contractor we have vetted. The Yukon main office stays involved from the first call through the bore log, including work in Lamar County.
Who owns electric lines in Deport, Lamar County, and who confirms conduit specs?
Electric service reported in Lamar County includes Oncor Electric Delivery Company, Texas-New Mexico Power, Fannin County Electric Cooperative and Lamar County Electric Cooperative Association. That list does not identify the provider at every Deport address. We confirm the line owner for the specific route before planning a conduit bore, and the owner confirms the required conduit specifications.
Who controls Depot Street in Deport, and does a bore need a street cut?
Depot Street is a city street, so it belongs to the City of Deport. Directional boring can put a line beneath the paved route instead of cutting across it. The entry and exit pits still need suitable space, and we check marked utilities before drilling near Depot Street.
Could older buried lines near Monroe Street affect a Deport replacement bore?
They could. The American Community Survey 2019 to 2023 estimates put the median housing year in Deport at 1975, with 19 percent of housing built before 1960. That age mix makes it worth checking for existing lines along a Monroe Street replacement route. We expose marked utilities before the drill gets near them.
Can groundwater or flood prone ground affect bore pits near Mustang Creek in Deport?
Yes. The USDA soil survey maps seasonal water tables within 60 inches in 10 percent of Deport and flood prone soils across 9 percent. Near Mustang Creek, we plan pit placement and depth with wet ground in mind, and a creek crossing is checked for Corps jurisdiction during planning.
Does Leson soil in Deport create a corrosion concern, and what pipe can be used?
The USDA soil survey maps high steel corrosion risk across Deport, including areas mapped as Leson soil. The line owner should consider that risk when choosing steel casing or tracer wire materials. HDPE does not have the same soil corrosion concern, but the line owner selects materials for the particular installation.
What bore sizes and lengths can Trinity handle for a Deport job near Read Street?
We handle lines from 3/4 inch service size up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. A Read Street route still needs its own plan based on the line size, footage, soil and marked utilities. Send the route and scope so we can review the setup.
How much notice does Texas811 need for a Deport bore near Jeffus Street?
The locate request for a Jeffus Street bore must reach Texas811 at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. If the start slips more than 14 days past the original notice for work in Lamar County, we make a new request. Along Mustang Creek, we have marks refreshed through Texas811 if they wear off or move before we continue work.
What affects the cost of a directional bore under US 271 in Deport as we plan the crossing?
The heavy clay mapped in Deport can affect reaming and fluid needs, while a US 271 crossing adds highway permitting and cover requirements. Pipe size, bore length, pavement, utility exposures, pits, creek crossings and backfill also shape the job. Mobilization from Yukon matters because Deport is 252 road miles from the main office.
Where the Deport facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Deport
- U.S. Census Bureau, TIGER/Line 2024: Deport boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Deport
- U.S. Census Bureau, American Community Survey 2019 to 2023: Deport housing units and year built
- Macrostrat geologic map compilation: map units under Deport
- U.S. EPA Safe Drinking Water Information System: public water systems serving Deport
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Lamar County and Red River County
- U.S. Geological Survey, Elevation Point Query Service: Deport elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Deport
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Deport
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Deport, Texas
Type the address of your job in Deport. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Deport
County: Red River County directional boring. Same county: Reno · Powderly · Roxton · Toco · Brookston · Petty · Clarksville · Avery · Annona. All counties: Texas county list.
