trinityboringsolutions.com

Burleson Texas Directional Boring: Crosstell Soil, Interstate 35 and Union Pacific

Quick Answer: We do directional boring, also called horizontal directional drilling (HDD), in Texas, including crossings of Interstate 35 in Burleson. Wilshire Boulevard and Renfro Street are among the city’s longest roads, and public road centerlines total 310.7 miles. Burleson is 230 road miles from our Yukon, Oklahoma main office, with Union Pacific track among the local crossings to plan around. The USDA soil survey maps heavy clay at depth, which can stick to the reamer and grip pipe.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Burleson bores at a glance

  • Incorporated city in Johnson County and Tarrant County, Texas. Population 56,253 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 230 miles, about 4.5 hours of driving.
  • Ground: Crosstell soil is mapped on 21 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 30 percent of the area.
  • Highways inside the boundary: Interstate 35, Texas State Highway 81, Texas State Highway 174, FM 731 and FM 917. State permit office: TxDOT Fort Worth District.
  • Railroad track inside the boundary: Union Pacific and BNSF Railway, with 12 mapped street and rail crossings.
  • Named streams inside the boundary: Village Creek, Shannon Creek, Quil Miller Creek and Willow Creek.
  • Public water: City of Burleson, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring near Interstate 35 in Burleson?

Burleson is in Johnson and Tarrant counties, and the Census Bureau Vintage 2024 estimate puts its population at 56,253. We install water, sewer, gas, electric conduit and fiber, routing those lines beneath local streets such as Renfro Street or toward connections near Interstate 35. A mapped route helps us plan around existing services and choose bore entry and exit points.

Our main office is in Yukon, Oklahoma, and Burleson work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Since 1982, our directional boring work has covered four decades; that experience informs how we plan for Burleson’s heavy clay and sandy loam. Trinity is a family business that started in 1965.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show beneath Burleson’s Crosstell soil?

The USDA soil survey maps Crosstell soil across 21 percent of Burleson, including fine sandy loam map units. At the surface, fine sandy loam covers 38 percent of the mapped area, while clay covers 23 percent. About 40 inches down, clay accounts for 55 percent of the mapped texture and silty clay another 17 percent. At that depth in Burleson, we account for an average clay content of 41 percent when planning the bore. These are mapped patterns, not test borings; a site investigation still matters because sticky clay can build up on a reamer and resist pipe pullback.

USDA soil survey, inside the Burleson city limitsWhat is mapped
Soil series mappedCrosstell 21 percent, Ponder 17 percent, Sanger 14 percent, Rader 6 percent and Gasil 5 percent
Texture at the surfacefine sandy loam 38 percent, clay loam 25 percent and clay 23 percent
Texture about 40 inches downclay 55 percent, silty clay 17 percent and clay loam 9 percent
Engineering class about 40 inches downfat clay (CH) 64 percent, lean clay (CL) 28 percent and silty clay (CL ML) 3 percent
Average clay content about 40 inches down41 percent
Bedrock mapped within 60 inches30 percent of the area (0 percent hard rock, 30 percent weathered rock)
Seasonal water table within 60 inches8 percent of the area
Flood prone soils9 percent of the area
High corrosion risk for uncoated steel83 percent of the area

The survey maps bedrock within 60 inches across 30 percent of Burleson, and the mapped bedrock at that depth is weathered; hard bedrock is not mapped there. A seasonal water table is mapped within 60 inches in 8 percent of the area, and flood prone soils in 9 percent. High steel corrosion risk covers 83 percent, so the line owner should consider casing and tracer wire materials. The Cenozoic silty clay decomposition residuum points to clay that can swell when wet and crack when dry.

How do we plan a bore through Burleson clay when the ground conditions can affect the crossing?

Burleson’s clay can hold an open hole but cling to the reamer. We adjust the drilling fluid and reaming sequence to keep the hole stable, then plan the pullback around pavement, mapped utilities and the specific route.

  1. Clay control: With clay mapped at 40 inches across much of Burleson, we use thinner fluid with polymer and ream in stages to limit sticky buildup.
  2. Pullback timing: Burleson’s heavy clay can swell and grip pipe, so we prepare the pipe and complete pullback the same day the hole is opened.
  3. Pavement protection: Near Interstate 35 or Wilshire Boulevard, we watch fluid returns in heavy clay and keep pressure controlled to reduce the risk of lifting pavement.
  4. Utility exposure: Before drilling near a marked line, we hydrovac pothole it; for example, a proposed route beneath Wilshire Boulevard needs each marked utility exposed first.
Drilling fluid returns at the entry as the Vermeer D24x40 S3 drills a 385 foot sandstone rock bore in Guthrie, Oklahoma
Drilling fluid coming back to the entry pit as our Vermeer D24x40 drills a 385 foot bore in Guthrie, Oklahoma.

Where might a Burleson bore pass beneath Wilshire Boulevard?

Interstate 35 has 19.7 mapped roadway miles within Burleson, while Texas State Highway 81 has 17.4 and Texas State Highway 174 has 11.0. FM 731, FM 917 and FM 1902 also run inside the city limits. Wilshire Boulevard is the longest named street at 10.52 miles, followed by Renfro Street at 6.89 miles and John Jones Drive at 6.56 miles. A bore route under one of these roads can keep pavement and driveways intact, subject to the road owner’s requirements.

CrossingTypeMapped extentWho has a say
Interstate 35Interstate19.7 roadway miles insideState highway office
Texas State Highway 81State highway17.4 roadway miles insideState highway office
Texas State Highway 174State highway11 roadway miles insideState highway office
FM 731State highway6.6 roadway miles insideState highway office
FM 917State highway3.8 roadway miles insideState highway office
FM 1902State highway3.3 roadway miles insideState highway office
FM 3391State highway1.4 roadway miles insideState highway office
Interstate 35 BusinessHighway nearby1.4 miles outsideState highway office
US 67Highway nearby1.4 miles outsideState highway office
Union PacificRailroad4.07 track miles insideThe railroad
BNSF RailwayRailroad3.92 track miles insideThe railroad
Village CreekStream5.59 channel miles insideChecked for Corps of Engineers jurisdiction
Shannon CreekStream4.1 channel miles insideChecked for Corps of Engineers jurisdiction
Quil Miller CreekStream3.16 channel miles insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 4.07 track miles in Burleson, and BNSF Railway has 3.92; public records map 12 street and rail crossings in the city. A track crossing needs the agreement of the railroad that owns that particular line. Village Creek runs 5.59 channel miles inside Burleson, and 27 street crossings of named streams are mapped. Shannon Creek and Quil Miller Creek are also local water crossings to assess; no lakes or ponds are mapped within one mile.

Who approves a Burleson bore near Union Pacific or a highway?

For a line crossing Interstate 35, electric and communication lines need at least 60 inches of cover below the lowest point of the crossed grade; water lines need 60 inches, and pressurized sewer lines need 60 inches. The line owner applies through TxDOT’s RULIS system, and the TxDOT Fort Worth District reviews it. The owner receives the permit, while we prepare the bore plan and profile. For work on Burleson city streets, we coordinate with the city because those streets belong to the city. A Union Pacific or BNSF crossing needs an agreement from the track owner, and a Village Creek route is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines may already be buried in Burleson and Johnson County?

The City of Burleson public water system uses purchased surface water and serves 53,381 people through 16,530 service connections. For an electric conduit bore, we confirm the line owner because Oncor Electric Delivery Company, Texas-New Mexico Power, HILCO Electric Cooperative and United Electric Cooperative Service report electric service in Johnson County. Those reports do not identify the provider at every address, so the specific owner matters before we plan a route near John Jones Drive.

Line ownerWhat it isSourceSize
City of BurlesonPublic water systemSurface water bought from another system16,530 connections, 53,381 people served
Oncor Electric Delivery Company, Texas-New Mexico Power, HILCO Electric Cooperative and United Electric Cooperative ServiceElectric utilities reporting service in Johnson County and Tarrant CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Burleson’s median housing year at 2002: 2 percent of homes were built before 1960, 43 percent from 1960 to 1999 and 55 percent in 2000 or later. That mix can mean both replacement work and new service routes near Renfro Street. Before drilling near a proposed route under John Jones Drive, we hydrovac pothole each marked utility on the path; surface marks show position, not depth.

Trinity Boring Solutions technician hydrovac daylighting along a commercial curbline during utility locating in Oklahoma City
Hydrovac daylighting along a commercial curb line in Oklahoma City to find the utilities before a bore.

How far is Burleson from Cross Timber and our Yukon yard?

Burleson covers 29.18 square miles in Johnson County and Tarrant County, with 92 percent of the city in Johnson County. At 798 feet elevation, the incorporated city includes ZIP codes 76028, 76058 and 76009. Cross Timber is 2.3 miles south, Briaroaks is 2.0 miles southeast, and Crowley is 4.5 miles northwest. Cleburne, the Johnson County seat, is 12.2 miles southwest; Arlington is 17.4 miles northeast. The Yukon yard is 230 road miles away, about a 4.5 hour drive, so distance is part of planning mobilization for a Wilshire Boulevard job.

Places near Burleson

What kinds of bores could come up near Renfro Street in Burleson?

  • Highway crossing: A route beneath Interstate 35 can carry water, sewer or conduit without cutting the existing pavement.
  • Street service: A bore near Renfro Street can connect a new water or sewer line while leaving driveways and sidewalks uncut.
  • Fiber route: Fiber conduit along John Jones Drive can be planned around marked utilities and the street’s existing buried lines.
  • Creek crossing: A route beneath Village Creek needs depth planning around the channel and a check for federal jurisdiction.
  • Rail crossing: A proposed crossing of Union Pacific track needs coordination with the railroad that owns that line.
  • Water connection: A service route near the City of Burleson water system can be planned after confirming the line owner and connection point.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore near Alsbury Boulevard in Burleson?

A map pin matters near Alsbury Boulevard because the exact route can change which marked utilities, pavement or drainage features a bore must pass. For a Burleson bore, send us the address or pin, what will go in the ground, the pipe or conduit size and the footage. A sketch or plans help us understand entry and exit space and how the route meets the street.

Ground conditions, crossings and logistics shape the price for an Alsbury Boulevard bore. Burleson’s mapped clay can affect fluid use and reaming; Interstate 35, Union Pacific track or a creek can add crossing requirements and planning. The route length, pipe size, utilities to expose, pavement, pits, excavator time and sand backfill also matter. Mobilization is part of the scope for a site 230 road miles from Yukon, and high profile or emergency work can change what the job requires.

Questions people ask about boring in Burleson

Does Trinity take directional boring work in Burleson and Johnson County?

Yes. We take directional boring work across Texas, including Burleson in Johnson County. Our Yukon office coordinates the work with our own crews and satellite yards run by drilling contractors we have vetted. You work with Trinity from the first call through the bore log, including when a crew is working near Interstate 35.

Who controls John Jones Drive in Burleson, and does a bore mean cutting the street?

John Jones Drive is a city street because Burleson is incorporated, so the city owns its streets. A directional bore can pass beneath pavement rather than opening a trench through it. The route still needs planning around marked utilities and any road requirements that apply to the specific crossing.

Do older buried lines near Renfro Street in Burleson need replacement bores?

They may. The American Community Survey 2019 to 2023 estimates put the median housing year at 2002, with 2 percent of homes built before 1960 and 55 percent built in 2000 or later. That mix can bring both replacement lines and new service needs near Renfro Street; the exact route and existing utilities determine the bore plan.

Can Crosstell soil in Burleson corrode steel, and what pipe should we use?

Burleson has high steel corrosion risk mapped across 83 percent of its area, so the line owner should consider casing and tracer wire materials. The soil survey maps Crosstell soil across 21 percent of the city, but material choice depends on the specific route and line requirements. HDPE is not affected by the mapped soil corrosion concern.

What ground will a bore encounter in Burleson’s Crosstell soil?

The USDA soil survey maps Crosstell soil across 21 percent of Burleson, including fine sandy loam. About 40 inches below the surface, clay makes up 55 percent of mapped texture and silty clay 17 percent. Clay can cling to the reamer, so staged reaming and fluid management may matter along a route near Wilshire Boulevard.

How much rock is mapped within five feet of the surface in Burleson?

The USDA soil survey maps bedrock within 60 inches across 30 percent of Burleson, and that mapped bedrock is weathered. Within 40 inches, bedrock is mapped in 2 percent of the area; hard bedrock is not mapped within 60 inches. A bore may still meet slower weathered material along its route.

Can I reach Trinity after hours about an urgent bore near John Jones Drive in Burleson?

Yes. A person answers Trinity’s phone 24 hours a day at (405) 409-7423, including after hours for an urgent job near John Jones Drive. Tell us where the work is, what line needs installing and what is happening on site so we can discuss the next step.

How early should I call Texas811 for a Burleson bore near Wilshire Boulevard?

For a bore near Wilshire Boulevard, Texas law requires a locate request at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. For a Burleson start, if scheduling slips more than 14 days past the original notice, we submit a new request. Before work continues in Burleson, we have worn or moved marks refreshed through Texas811.

What affects the cost of a directional bore under Interstate 35 in Burleson?

The scope drives the price, including bore length, pipe size, Burleson’s clay or weathered ground, and utilities that need exposure. An Interstate 35 crossing or nearby Union Pacific track adds planning needs; pavement, creek crossings, pits, excavator time and backfill also matter. The distance from Yukon affects mobilization, while urgent or high profile work can change the job requirements.

Where the Burleson facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Burleson

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Burleson, Texas

Type the address of your job in Burleson. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Burleson

County: Tarrant County directional boring. Same county: Cleburne · Venus · Alvarado · Keene · Mansfield · Pecan Plantation · Godley · Grandview · Rio Vista · Coyote Flats · Cresson · The Homesteads. All counties: Texas county list.