Cross Timber Texas Directional Boring: Gasil Fine Sandy Loam, FM 731 and Union Pacific
Quick Answer: What does the top five feet look like in Cross Timber, and what lies below? Trinity Boring Solutions uses directional boring, also called horizontal directional drilling (HDD), for routes crossing FM 731 and Cross Timber Road. The Yukon, Oklahoma main office is 232 road miles away, a factor for mobilization to Cross Timber Road. Gasil soil is mapped as loamy fine sand in 18% of the area; sandy clay loam at about 40 inches can grip pipe, so we control fluid and reaming.
Cross Timber bores at a glance
- Incorporated city in Johnson County, Texas. Population 477 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 232 miles, about 4.6 hours of driving.
- Ground: Gasil soil is mapped on 32 percent of the area, with sandy clay loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 26 percent of the area.
- Highways inside the boundary: FM 731. State permit office: TxDOT Fort Worth District.
- Railroad track inside the boundary: Union Pacific, with 1 mapped street and rail crossings.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can handle directional boring near FM 731 in Cross Timber?
What does the top five feet look like in Cross Timber, and what lies below? Gasil loamy fine sand is mapped near the surface, with sandy clay loam under about 40 inches. We take directional boring and horizontal directional drilling (HDD) work in Johnson County, including Cross Timber, where the Census Bureau Vintage 2024 estimate puts the population at 477. Water, sewer, gas, electric conduit and fiber routes can run beneath Cross Timber Road or toward FM 731.
Our main office is in Yukon, Oklahoma, and Cross Timber work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our range runs from a 3/4 inch service line on Cross Timber Road to 48 inch casing on a larger FM 731 route, with bore lengths from 10 feet to 5,000 feet. The family business began in 1965 and has done directional boring since 1982.

How does Gasil soil affect boring in Cross Timber?
The USDA soil survey maps Gasil across 32% of Cross Timber, with Crosstell at 19%, Rader at 18%, Silstid at 15% and Birome at 8%. Surface textures are mainly fine sandy loam at 55% and loamy fine sand at 36%, with stony fine sandy loam at 8%. About 40 inches down, sandy clay loam is mapped under 51% of the town, clay under 24% and clay loam under 18%. The upper material may cut readily, while deeper clay can cling to the reamer and resist the pipe pull.
| USDA soil survey, inside the Cross Timber city limits | What is mapped |
|---|---|
| Soil series mapped | Gasil 32 percent, Crosstell 19 percent, Rader 18 percent, Silstid 15 percent and Birome 8 percent |
| Texture at the surface | fine sandy loam 55 percent, loamy fine sand 36 percent and stony fine sandy loam 8 percent |
| Texture about 40 inches down | sandy clay loam 51 percent, clay 24 percent and clay loam 18 percent |
| Engineering class about 40 inches down | lean clay (CL) 58 percent, fat clay (CH) 19 percent and clayey sand (SC) 15 percent |
| Average clay content about 40 inches down | 31 percent |
| Bedrock mapped within 60 inches | 26 percent of the area (0 percent hard rock, 26 percent weathered rock) |
| Seasonal water table within 60 inches | 26 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 53 percent of the area |
The USDA soil survey places bedrock within 60 inches under 26% of Cross Timber, and describes that mapped bedrock as weathered; it shows no hard bedrock at that depth. A seasonal water table is mapped within 60 inches under 26%, so pits may need pumping. Cross Timber’s soil map shows no flood prone soils. High steel corrosion risk is mapped under 53% of the town, a reason to consider casing and tracer wire materials. The geologic map includes Quartz sand decomposition residuum of Cenozoic age and Woodbine Formation of Late Cretaceous age, with sand, claystone, sandstone and mudstone that can change drilling conditions.
How do we plan a bore in Cross Timber’s sandy clay loam to account for the soil during drilling?
Gasil loamy fine sand can loosen around the bit, while sandy clay loam appears deeper in Cross Timber. We adjust fluid and reaming as the bore moves between these mapped materials.
- In Gasil loamy fine sand, we build a supporting fluid wall and ream in stages so the open section does not cave before the pipe is ready.
- Where sandy clay loam holds to the reamer, we use thinner fluid with polymer, make successive passes and pull pipe the day the hole opens.
- With a seasonal water table mapped within 60 inches under 26% of Cross Timber, we keep pits small and pump water if a pit fills.
- For a bore beneath Cross Timber Road, we follow the drill head with a surface locator and record depth and pitch to hold the planned path.

What might a new line cross on Cross Timber Road?
FM 731 is the state highway mapped inside Cross Timber, with 0.3 roadway miles within town limits. No highway is listed within 1.5 miles outside those limits. Cross Timber Road is the longest named street at 0.75 miles, followed by Tarver Road at 0.66 miles and Trails End Road at 0.55 miles. A route beneath one of these streets can avoid cutting the pavement, but the path and pits still have to fit the road and nearby marked utilities.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 731 | State highway | 0.3 roadway miles inside | State highway office |
| Union Pacific | Railroad | 0.4 track miles inside | The railroad |
| Quil Miller Creek | Stream nearby | 0.1 miles outside | Checked for Corps of Engineers jurisdiction |
| Village Creek | Stream nearby | 0.5 miles outside | Checked for Corps of Engineers jurisdiction |
| Willow Creek | Stream nearby | 0.8 miles outside | Checked for Corps of Engineers jurisdiction |
Union Pacific owns 0.4 track miles inside Cross Timber, and one street and rail crossing is mapped. No named stream runs inside the town, and no street crossing of a named stream is mapped there. Quil Miller Creek is 0.1 miles from the town limits, Village Creek is 0.5 miles away and Willow Creek is 0.8 miles away. The town has 0.68 miles of unnamed drainage, so a route near a drainage should be checked against its actual path. We account for no mapped lakes or ponds within one mile when planning underground routes in Cross Timber.
Who approves boring work in Cross Timber and Johnson County?
Cross Timber is incorporated, so streets such as Cross Timber Road belong to the town. Work in the FM 731 right of way needs a TxDOT utility permit reviewed by the TxDOT Fort Worth District. The utility owner submits the application through RULIS; we prepare the bore plan and profile and work under that owner’s permit. At FM 731, cover requirements depend on the line: electric and communication crossings need at least 60 inches below the lowest crossed grade, and water and pressurized sewer crossings need 60 inches. The permit may set another depth. Existing highway pavement is bored or tunneled, with crossings encased. A Union Pacific track crossing needs an agreement with the railroad; a creek route is checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines are already in the ground in Johnson County in Cross Timber?
For a proposed water line on Tarver Road, the water provider for that specific address has to be confirmed with the city, the county or the local water district before a bore is planned. Utilities reporting electric service in Johnson County include Oncor Electric Delivery Company, Texas-New Mexico Power, HILCO Electric Cooperative and United Electric Cooperative Service. Those reports do not identify the electric provider for every Cross Timber address, so the line owner must be confirmed before a conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Oncor Electric Delivery Company, Texas-New Mexico Power, HILCO Electric Cooperative and United Electric Cooperative Service | Electric utilities reporting service in Johnson County | EIA Form 861 | Confirm the line owner by address |
We use Cross Timber’s median housing year of 2008, reported in the American Community Survey 2019 to 2023 five year estimates, as context for underground planning. The estimates show 73% of homes built in 2000 or later, 26% from 1960 to 1999 and 1% before 1960. That mix can mean both new services and replacement work; house age alone does not date a buried line. We hydrovac pothole every marked utility on the bore path before drilling near it because paint shows position, not depth. For a proposed line beneath Cross Timber Road, we expose each marked utility along that path before the drill approaches.

Where is Cross Timber in relation to Burleson?
Cross Timber is in Johnson County, at an elevation of 804 feet, and covers 1.62 square miles. Its ZIP code is 76028. Briaroaks is 1.6 miles northeast, Burleson is 2.3 miles north and Joshua is 3.7 miles southwest. Cleburne, the county seat, is 10.1 miles southwest. The Yukon, Oklahoma main office is 232 road miles away, about a 4.6 hour drive; that distance is part of planning mobilization for work near FM 731 or Cross Timber Road.
Places near Cross Timber
- Directional boring in Briaroaks: 1.6 miles northeast
- Directional boring in Burleson: 2.3 miles north
- Directional boring in Joshua: 3.7 miles southwest
- Directional boring in Keene: 6 miles south
- Directional boring in Crowley: 6.7 miles north
What would we bore near Quil Miller Creek in Cross Timber?
- Highway crossing: A bore beneath FM 731 would follow the permitted cover and casing plan while keeping the existing highway pavement intact.
- Street service: A water or sewer connection beneath Cross Timber Road can pass below the street instead of cutting across its pavement.
- Rail crossing: A route beneath Union Pacific track would be planned around the railroad agreement and the crossing conditions it sets.
- Creek crossing: If a route reaches Quil Miller Creek just outside town, its channel and possible Corps jurisdiction would be checked during planning.
- Fiber route: A fiber conduit along Tarver Road could use a bore path that avoids opening the street surface and exposes marked utilities first.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for Cross Timber work near Union Pacific?
For a quote, send the Cross Timber address or map pin, what is going in the ground, the pipe or conduit size and footage; a sketch or plans help. A route near FM 731 or the Union Pacific track needs those crossing points shown because they affect the bore plan and crossing details.
For a Cross Timber bore, length and pipe size set the basic scope, while Gasil loamy fine sand over sandy clay loam can change fluid control, reaming and pullback. Crossings and exposures matter next: FM 731, the Union Pacific track, pavement and any creek or drainage route can add design and field work. Pits, excavator time, sand backfill and high profile or emergency work also shape the job. At 232 road miles from Yukon, mobilization is another factor.
Questions people ask about boring in Cross Timber
Does Trinity Boring Solutions take directional boring work in Cross Timber and Johnson County, and who staffs it?
We take directional boring jobs in Cross Timber and across Johnson County. Work is done by our own crews and from satellite yards run by drilling contractors we have vetted. Customers deal with Trinity from the first call through the bore log, including work routed near FM 731.
Is there rock under Cross Timber, and how much is mapped within five feet?
The USDA soil survey maps bedrock within 60 inches under 26% of Cross Timber, with that mapped bedrock described as weathered. Bedrock is mapped within 40 inches under 8% of the town. Hard bedrock is not mapped at those depths, but the survey is not a test of an individual bore route.
Who approves a bore under FM 731 in Cross Timber, and which TxDOT office reviews it?
TxDOT reviews a utility permit for work in the FM 731 right of way through its Fort Worth District. The utility owner submits the application in RULIS, and we prepare the bore plan and profile for that filing. Cover and casing details are set through the permit for the specific crossing.
What does a bore under Union Pacific in Cross Timber require?
Union Pacific owns 0.4 track miles in Cross Timber, and a crossing needs an agreement with the railroad. That agreement sets crossing conditions such as casing, depth and flagging. If the route also occupies highway right of way near FM 731, TxDOT asks for a copy of the railroad agreement.
Can a line be bored under Quil Miller Creek near Cross Timber?
A crossing can be planned, but the route needs review: Quil Miller Creek is 0.1 miles from Cross Timber’s limits, and no named stream runs inside town. During planning, a creek crossing is checked for U.S. Army Corps of Engineers jurisdiction and the bore is designed for the channel.
Which electric companies report service in Johnson County near Cross Timber, and who confirms conduit details?
Oncor Electric Delivery Company, Texas-New Mexico Power, HILCO Electric Cooperative and United Electric Cooperative Service report service in Johnson County. Those reports do not identify the provider at every Cross Timber address. The line owner for the particular route needs to be confirmed before conduit specifications and a bore plan are set.
How much notice does Texas811 need for a bore on Cross Timber Road, and what if marks change?
For a bore on Cross Timber Road, request the locate at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. For Cross Timber work, we submit a new request if the start slips more than 14 days past the original notice. Before work continues in Cross Timber, we refresh worn or moved marks through Texas811.
How far is Cross Timber from Burleson and Trinity’s Yukon main office, and does it affect a job?
Burleson is 2.3 miles north of Cross Timber, while Trinity’s Yukon, Oklahoma main office is 232 road miles away, about a 4.6 hour drive. That distance can affect mobilization for work near Cross Timber Road or FM 731, alongside the route, ground and crossing requirements.
What affects the price of directional boring near FM 731 in Cross Timber?
The job’s length and pipe size matter, as do Gasil soil conditions, pavement, exposed utilities and the number of crossings. A route involving FM 731 or Union Pacific can add permit or railroad planning, while a creek or drainage route may change the setup. Pits, equipment time, backfill and mobilization from Yukon also affect the scope.
Where the Cross Timber facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Cross Timber
- U.S. Census Bureau, TIGER/Line 2024: Cross Timber boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Cross Timber
- U.S. Census Bureau, American Community Survey 2019 to 2023: Cross Timber housing units and year built
- Macrostrat geologic map compilation: map units under Cross Timber
- U.S. Department of Transportation, North American Rail Network: track owners in Johnson County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Johnson County
- U.S. Geological Survey, Elevation Point Query Service: Cross Timber elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Cross Timber
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Cross Timber
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Cross Timber, Texas
Type the address of your job in Cross Timber. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Cross Timber
Same county: Cleburne · Venus · Alvarado · Mansfield · Pecan Plantation · Godley · Grandview · Rio Vista · Coyote Flats · Cresson · The Homesteads. All counties: Texas county list.
