Santa Clara Texas Directional Boring: Houston Black Clay, FM 78 And Union Pacific
Quick Answer: Public records do not identify the water provider for a Santa Clara address, while Guadalupe County electric reports include AEP Texas Central and Guadalupe Valley Electric Cooperative; we confirm the owner before planning a bore. FM 78 is one route for directional boring, also called horizontal directional drilling (HDD), for utility crossings. Santa Clara is 458 road miles from our Yukon main office, and Union Pacific track affects mobilization planning. Houston Black clay dominates mapped soils, so sticky cuttings and pipe grip call for staged reaming and a same day pull.
Santa Clara bores at a glance
- Incorporated city in Guadalupe County, Texas. Population 753 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 458 miles, about 8.9 hours of driving.
- Ground: Houston Black soil is mapped on 67 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 2 percent of the area.
- Highways inside the boundary: FM 78 and FM 1044. State permit office: TxDOT San Antonio District.
- Railroad track inside the boundary: Union Pacific, with 2 mapped street and rail crossings.
- Named streams inside the boundary: Santa Clara Creek and Youngs Creek.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring near FM 78 in Santa Clara?
Santa Clara has 753 residents in the Census Bureau Vintage 2024 estimate, within Guadalupe County. We install water, sewer, gas, electric conduit and fiber along routes such as FM 78 and Santa Clara Road or near Santa Clara Creek. Before a water bore, we confirm the provider for the specific address with the city, county or local water district.
Our main office is in Yukon, Oklahoma, and Santa Clara work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Since 1982, directional boring has taught us to manage sticky Houston Black clay with deliberate fluid and reaming choices. Our family business started in 1965, and that ground specific planning matters on Santa Clara routes.

How does Houston Black soil affect a bore in Santa Clara?
The USDA soil survey maps Houston Black soil across 67% of Santa Clara, including Houston Black clay map units. At the surface, clay covers 81% of the mapped area and gravelly clay another 17%. At about 40 inches below the surface, clay is mapped under 99% of the area, with an average clay content of 53% and a CH classification under 99%. We treat the mapped soil patterns around Santa Clara as planning context, not substitutes for test borings. The heavy clay can cling to the reamer and grip pipe, so the bore plan should account for staged reaming and timely pipe pull.
| USDA soil survey, inside the Santa Clara city limits | What is mapped |
|---|---|
| Soil series mapped | Houston Black 67 percent, Branyon 15 percent, Heiden 7 percent, Tinn 6 percent and Burleson 3 percent |
| Texture at the surface | clay 81 percent and gravelly clay 17 percent |
| Texture about 40 inches down | clay 99 percent |
| Engineering class about 40 inches down | fat clay (CH) 99 percent |
| Average clay content about 40 inches down | 53 percent |
| Bedrock mapped within 60 inches | 2 percent of the area (0 percent hard rock, 2 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 6 percent of the area |
| High corrosion risk for uncoated steel | 99 percent of the area |
The soil survey maps bedrock within 60 inches in 2% of Santa Clara, with typical bedrock depth shown as 21 inches; those map patterns do not predict every bore. A seasonal water table within 60 inches is not mapped, while flood prone soils cover 6%. High steel corrosion risk is mapped across 99%, so the line owner should consider casing and tracer wire materials. The geologic map identifies Navarro Group and Marlbrook Marl, undivided, of Maastrichtian age, with marl, clay, sandstone and siltstone. That mix can mean slower drilling where weathered rock is encountered.
What does it take to bore through clay in Santa Clara?
Houston Black clay and the CH soils mapped below Santa Clara call for controlled fluid and careful reaming. We track the drill head as the bore advances and plan the pull around the clay’s tendency to cling to tooling and pipe.
- In Houston Black clay, we use a thinner drilling fluid with polymer and open the hole in stages to limit sticky buildup on the reamer.
- Because heavy clay can grip pipe, we have the pipe ready and plan to pull it the same day the bore is opened.
- Near FM 78 pavement, we watch fluid returns and pressure so the bore does not lift the surface; the drill head is tracked from above.
- At Santa Clara Creek, we plan depth below the channel and check the route for waterway jurisdiction before setting the crossing approach.

Could a Santa Clara bore cross Santa Clara Creek?
FM 78 has 3.1 mapped roadway miles within Santa Clara, and FM 1044 has 0.2. A route may also follow Weil Road, Youngsford Road or Santa Clara Road, among the city’s longer named streets. Under existing highway pavement, the state requires boring or tunneling rather than open trenching. A crossing plan has to account for the highway right of way and the line’s required cover, not just the street alignment.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 78 | State highway | 3.1 roadway miles inside | State highway office |
| FM 1044 | State highway | 0.2 roadway miles inside | State highway office |
| Union Pacific | Railroad | 1.56 track miles inside | The railroad |
| Santa Clara Creek | Stream | 0.17 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Youngs Creek | Stream | 0.11 channel miles inside | Checked for Corps of Engineers jurisdiction |
Union Pacific owns 1.56 track miles inside Santa Clara on its Glidden Subdivision, and the mapped street and rail crossing count is 2. A rail bore needs the railroad’s agreement for its crossing conditions. Santa Clara Creek runs 0.17 channel miles in the city, and Youngs Creek runs 0.11; the mapped street crossings of named streams total 2. Creek routes need depth planning under the channel and a check for federal waterway jurisdiction. We account for the absence of mapped lakes or ponds within one mile when planning a Santa Clara bore route.
Who has to approve a Santa Clara bore near Union Pacific track?
Santa Clara is incorporated, so its city streets belong to the city; FM 78 and FM 1044 are state highways. For work in a state highway right of way, the utility owner, not our crew, files through TxDOT’s online RULIS system. We provide that owner with the bore plan and profile, and the TxDOT San Antonio District reviews the application. Cover depends on the line: electric and communications need 60 inches at crossings, while water needs 60 inches and pressurized sewer needs 60 inches. A Union Pacific track crossing also requires an agreement with the railroad. Santa Clara Creek crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What is already in the ground in Guadalupe County near Santa Clara?
EPA drinking water records do not tie a water system to Santa Clara, so the provider for a specific address must be confirmed with the city, Guadalupe County or the local water district before a bore is planned. Utilities reporting electric service in Guadalupe County include AEP Texas Central, City of New Braunfels, City of San Antonio, City of Seguin, Bluebonnet Electric Cooperative, Guadalupe Valley Electric Cooperative and Pedernales Electric Cooperative. We confirm the line owner for the address before planning an electric conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| AEP Texas Central, City of New Braunfels, City of San Antonio, City of Seguin, Bluebonnet Electric Cooperative, Guadalupe Valley Electric Cooperative and Pedernales Electric Cooperative | Electric utilities reporting service in Guadalupe County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Santa Clara’s median year built at 1997; 6% of housing units date before 1960, 49% from 1960 to 1999 and 45% from 2000 or later. That mix can mean replacement work as well as new services along Santa Clara Road or Weil Road. Before drilling near a marked utility, we hydrovac pothole it to confirm depth; paint shows position, not how deep the line sits.

Where is Santa Clara in relation to Cibolo and our Yukon office?
Santa Clara is an incorporated city in Guadalupe County, at an elevation of 702 feet and covering 2.28 square miles. For Santa Clara directional boring, we use ZIP codes 78124 and 78108 to identify the service area, not the bore path. Marion is 1.8 miles southeast, Cibolo is 3.8 miles southwest, Schertz is 5.8 miles west, Zuehl is 6.1 miles south and McQueeney is 6.8 miles east. Seguin, the county seat, is 11.5 miles east. From our Yukon, Oklahoma main office, the drive is 458 road miles and 8.9 hours, which affects mobilization for a Santa Clara job.
Places near Santa Clara
- Directional boring in Marion: 1.8 miles southeast
- Directional boring in Cibolo: 3.8 miles southwest
- Directional boring in Schertz: 5.8 miles west
- Directional boring in Zuehl: 6.1 miles south
- Directional boring in McQueeney: 6.8 miles east
What boring work comes up near Weil Road in Santa Clara?
- Highway crossing: A bore under FM 78 keeps the utility beneath the paved route and accounts for the state highway right of way.
- Street service: A water or sewer line along Weil Road can be installed without cutting the street surface.
- Fiber route: A conduit run near Youngsford Road can connect services while keeping the marked utilities exposed before drilling nearby.
- Creek crossing: A route under Santa Clara Creek needs channel depth planning and a jurisdiction check during the design stage.
- Rail crossing: A utility route at the Union Pacific Glidden Subdivision needs the railroad’s crossing agreement and its specified conditions.
- Electric conduit: Along Santa Clara Road, we confirm the address specific line owner before planning the conduit bore.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of directional boring near Marion Road in Santa Clara?
For a Santa Clara quote, walk us through where the work is, what goes underground, how large it is and how long the route runs. A map pin near Marion Road or FM 78 locates the route; tell us whether it is water, sewer, gas, electric conduit or fiber, then give the pipe or conduit size and footage. A sketch or plans help show crossings.
Houston Black clay is a leading price factor because sticky cuttings can require staged reaming and careful fluid control. Next, the number of utilities to expose and any FM 78 pavement, Union Pacific track or Santa Clara Creek crossing shape the work. Route length, pipe size, pits, excavator time and sand backfill also matter. Mobilization reflects Santa Clara’s 458 road miles from Yukon, while emergency or high profile work can add planning demands.
Questions people ask about boring in Santa Clara
Does Trinity take directional boring jobs in Guadalupe County near Santa Clara, and who staffs them?
Yes. We take directional boring requests in Santa Clara and across Texas, with routing shaped by each crossing. Our own crews or crews from satellite yards run by partner drilling contractors we have vetted can staff the work. You coordinate with Trinity from the first call through the bore log, including a route near FM 78.
Who approves a bore under FM 78 in Santa Clara, and which state office reviews it?
For work in the FM 78 right of way, the utility owner submits the application in TxDOT’s RULIS system, not the drilling contractor. Trinity supplies the bore plan and profile for that filing. The TxDOT San Antonio District reviews the Santa Clara application.
What does a bore beneath Union Pacific track in Santa Clara require?
A crossing beneath the Union Pacific Glidden Subdivision requires an agreement with the railroad that owns the track. Its terms set crossing details such as casing, depth and flagging. We plan the Santa Clara bore to those conditions before drilling near the 1.56 track miles in the city.
Can a utility line be bored under Santa Clara Creek in Santa Clara?
Yes, a bore can be planned beneath Santa Clara Creek, with the route set to stay below the channel. When planning a Santa Clara crossing, we check whether it falls under US Army Corps of Engineers jurisdiction. The creek has 0.17 channel miles inside Santa Clara.
Who owns the electric lines in Guadalupe County near Santa Clara, and who confirms conduit specs?
Utilities reporting service in Guadalupe County include AEP Texas Central, Bluebonnet Electric Cooperative and Guadalupe Valley Electric Cooperative, among others. Those reports do not identify the owner for every Santa Clara address. We confirm the specific line owner before planning the conduit route and specs near FM 78.
Who controls Santa Clara Road in Santa Clara, and does a bore require cutting it?
We account for Santa Clara’s incorporated status when planning crossings on streets belonging to the city. A directional bore along or beneath Santa Clara Road can leave the street uncut, with pits placed in dirt on either side of the route. The exact approach depends on the line and marked utilities.
How far is Santa Clara from Yukon near Cibolo, and does that change the job?
Santa Clara is 458 road miles and an 8.9 hour drive from our Yukon, Oklahoma main office. That distance affects crew mobilization planning for a job near Cibolo, which is 3.8 miles southwest of Santa Clara. Route length and crossings also shape the scope.
How much notice does Texas811 need for a Santa Clara bore near Youngsford Road, and what about worn marks?
For a bore near Youngsford Road, request locates through Texas811 at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. For Santa Clara work, we submit a new request if the start slips more than 14 days past the original notice. On a Santa Clara bore, we refresh worn or moved marks through Texas811 before work continues.
What affects directional boring costs near FM 78 in Santa Clara?
The Santa Clara job scope sets the price: Houston Black clay, bore length and pipe size come first, along with utilities to expose. FM 78 pavement, Union Pacific track or Santa Clara Creek crossings can add work. Pits, equipment time, backfill and mobilization from Yukon also matter; no single route detail sets the price by itself.
Where the Santa Clara facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Santa Clara
- U.S. Census Bureau, TIGER/Line 2024: Santa Clara boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Santa Clara
- U.S. Census Bureau, American Community Survey 2019 to 2023: Santa Clara housing units and year built
- Macrostrat geologic map compilation: map units under Santa Clara
- U.S. Department of Transportation, North American Rail Network: track owners in Guadalupe County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Guadalupe County
- U.S. Geological Survey, Elevation Point Query Service: Santa Clara elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Santa Clara
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Santa Clara
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Santa Clara, Texas
Type the address of your job in Santa Clara. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Santa Clara
Same county: Seguin · New Braunfels · Redwood · Selma · Lake Dunlap · Geronimo · New Berlin · Staples · Kingsbury. All counties: Texas county list.
