trinityboringsolutions.com

Mineral Wells Texas Directional Boring: Bonti Soil, US 180 And Rock Creek

Quick Answer: Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Mineral Wells for routes under US 180 or Rock Creek. Mineral Wells is 233 road miles from our Yukon, Oklahoma main office, and our crews coordinate jobs near 4th Avenue from the first call through the bore log. The USDA soil survey maps Bonti among the leading soil series, while clay at about 40 inches can cling to the reamer and slow the pull. At Rock Creek, we plan a route that leaves the banks uncut and check the crossing during planning.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Mineral Wells bores at a glance

  • Incorporated city in Palo Pinto County and Parker County, Texas. Population 15,688 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 233 miles, about 5 hours of driving.
  • Ground: Bonti soil is mapped on 25 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 63 percent of the area.
  • Highways inside the boundary: US 180, US 281, FM 1821, FM 3027 and FM 1195. State permit office: TxDOT Fort Worth District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Rock Creek, Pollard Creek and Whatley Creek.
  • Public water: City of Mineral Wells, surface water.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring near US 180 in Mineral Wells?

Trinity Boring Solutions takes directional boring work in Mineral Wells, with our crews dispatched from 233 road miles away at Yukon and routes planned around US 180. The Census Bureau Vintage 2024 estimate puts Mineral Wells at 15,688 people across Palo Pinto and Parker Counties. We install water, sewer, gas, electric conduit and fiber for routes beneath 4th Avenue or along US 281, with the line type and path shaping the bore plan.

Our main office is in Yukon, Oklahoma, and Mineral Wells work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our range covers 3/4 inch service lines through 48 inch casing, with bore lengths from 10 feet to 5,000 feet. A short service near 4th Avenue and a long casing route under Rock Creek show the different scales of work we handle. We are a family business started 1965, and directional boring has been part of our work since 1982.

Aerial view of Trinity Boring Solutions crew and service van at a multifamily apartment underground utility jobsite in Oklahoma City
Our crew and service van at a multifamily underground utility job in Oklahoma City, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Bonti soil indicate in Mineral Wells?

Mineral Wells has Bonti among its leading mapped soil series, and the USDA soil survey shows clay and bedrock are common deeper down. Bonti makes up 25% of the mapped series, followed by Truce at 20%, Thurber at 14% and Shatruce at 14%. At about 40 inches, clay is mapped across 52% of the area, with an average clay content of 42%. The survey maps heavy clay across 59% at that depth and bedrock across 29%; these are mapped patterns, not test borings. Sticky clay can load a reamer, so staged reaming and a same day pull may suit some routes.

USDA soil survey, inside the Mineral Wells city limitsWhat is mapped
Soil series mappedBonti 25 percent, Truce 20 percent, Thurber 14 percent, Shatruce 14 percent and Santo 7 percent
Texture at the surfacefine sandy loam 41 percent, clay loam 14 percent and gravelly sandy loam 14 percent
Texture about 40 inches downclay 52 percent, bedrock 29 percent and loamy fine sand 7 percent
Engineering class about 40 inches downlean clay (CL) 37 percent, fat clay (CH) 24 percent and silty clayey sand (SC SM) 7 percent
Average clay content about 40 inches down42 percent
Bedrock mapped within 60 inches63 percent of the area (3 percent hard rock, 60 percent weathered rock)
Seasonal water table within 60 inches4 percent of the area
Flood prone soils8 percent of the area
High corrosion risk for uncoated steel76 percent of the area

The USDA soil survey maps bedrock within 60 inches across 63% of Mineral Wells, with a typical depth of 38 inches; much of it is weathered bedrock. The Mineral Wells Formation is Pennsylvanian and includes shale, sandstone, conglomerate and limestone, so a route can move from soil into rock. Seasonal water tables are mapped within 60 inches across 4%, while flood prone soils cover 8%, which matters near Rock Creek. High steel corrosion risk is mapped across 76%, so the line owner should consider casing and tracer wire protection; HDPE is not affected by soil corrosion.

What does it take to bore Mineral Wells clay?

For Mineral Wells clay, we match the fluid and reaming pace to the ground shown around Bonti soils. A route near Rock Creek or US 180 also needs careful depth and utility checks before the drill advances.

  1. Where Bonti clay is sticky, we can use a thinner fluid with polymer and ream in stages so clay is less likely to ball on the reamer.
  2. At Rock Creek, we plan depth around the channel and check for U.S. Army Corps of Engineers jurisdiction before setting the crossing route.
  3. Near US 180 pavement, we keep fluid pressure low enough to reduce the chance of lifting the surface and track the drill head from above.
  4. Before a bore near 4th Avenue, we expose each marked utility on the path with hydrovac and log drill depth and pitch as the head advances.
Rod box on the Vermeer D24x40 S3 Navigator with the bore path heading toward the trees on a rock bore in Guthrie, OK
Rod box on our Vermeer D24x40 with the bore path heading toward the trees on a rock bore in Guthrie, Oklahoma.

Where does a line have to go under Rock Creek in Mineral Wells?

Mineral Wells has several highway corridors to account for, including US 180 with 11.1 mapped roadway miles inside the city and US 281 with 3.8. FM 1821, FM 3027 and FM 1195 also run through the limits. A route under existing highway pavement needs a bore or tunnel rather than an open trench. Among the longer city streets, 4th Avenue runs 5.17 miles, 5th Avenue runs 4.84 miles and 2nd Avenue runs 4.68 miles. Those street lengths mean the route and nearby utilities matter as much as the crossing point.

CrossingTypeMapped extentWho has a say
US 180US highway11.1 roadway miles insideState highway office
US 281US highway3.8 roadway miles insideState highway office
FM 1821State highway3.6 roadway miles insideState highway office
FM 3027State highway2.4 roadway miles insideState highway office
FM 1195State highway2 roadway miles insideState highway office
FM 2256State highway0.6 roadway miles insideState highway office
Texas State Highway 337State highway0.5 roadway miles insideState highway office
Rock CreekStream6.37 channel miles insideChecked for Corps of Engineers jurisdiction
Pollard CreekStream2.39 channel miles insideChecked for Corps of Engineers jurisdiction
Whatley CreekStream1.33 channel miles insideChecked for Corps of Engineers jurisdiction
Rippy BranchStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Indian CreekStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Lihe CreekStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Dry CreekStream nearby0.8 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Public records show no railroad inside Mineral Wells or within 1 mile outside the limits, so no mapped rail crossing enters the initial route picture. Rock Creek runs 6.37 channel miles through the city, and mapped street crossings of named streams total 15. Pollard Creek and Whatley Creek add 2.39 and 1.33 channel miles. Lake Mineral Wells is also inside the limits. A creek or lake route is checked for U.S. Army Corps of Engineers jurisdiction during planning, and directional boring can leave banks and pavement uncut.

Who approves a bore on Mineral Wells roads in Palo Pinto County?

Mineral Wells city streets are under city control, while a bore on US 180, US 281 or a farm to market road needs a TxDOT utility permit. For Palo Pinto County, the TxDOT Fort Worth District reviews the application, which the utility owner files through RULIS; we prepare the bore plan and profile for that filing. At a highway crossing, electric and communication lines need 60 inches of cover and water needs 60 inches; pressurized sewer also needs 60 inches. Along the right of way, the listed cover is 48 inches for electric and communication and 36 inches for water. Existing highway pavement is bored or tunneled, and highway crossings are encased.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried near the City of Mineral Wells system?

The City of Mineral Wells runs the public water system, which uses surface water and reports 14,302 service connections serving 15,564 people. That system is a key point to check when planning a water bore near 4th Avenue or US 180. Electric service reported in Palo Pinto and Parker Counties includes Oncor Electric Delivery Company, Texas-New Mexico Power, Tri-County Electric Cooperative and United Electric Cooperative Service. We confirm the line owner for the specific route before planning an electric conduit bore.

Line ownerWhat it isSourceSize
City of Mineral WellsPublic water systemSurface water14,302 connections, 15,564 people served
Oncor Electric Delivery Company, Texas-New Mexico Power, Tri-County Electric Cooperative and United Electric Cooperative ServiceElectric utilities reporting service in Palo Pinto County and Parker CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The median housing year in Mineral Wells is 1966, so we check route constraints before planning underground boring. It estimates 36% of housing was built before 1960, 51% from 1960 to 1999 and 13% in 2000 or later. That mix can mean a 5th Avenue project is replacing an older service rather than adding a new one, but the actual buried line must be checked. We hydrovac pothole marked utilities on the bore path before drilling near them because paint shows position, not depth.

Exposed underground utility line in a hand dug potholing pit before a directional bore in Oklahoma
An existing utility line exposed in a pothole before a directional bore in Oklahoma.

Do you cover Cool and other sites near Mineral Wells?

Mineral Wells is in Palo Pinto and Parker Counties, at an elevation of 949 feet, and covers 20.4 square miles. The city’s ZIP codes are 76067 and 76088. Cool is 4.2 miles southeast, Garner is 5.5 miles east, and Millsap is 6.4 miles southeast. Palo Pinto, the county seat, is 13.4 miles west; Weatherford is 18.5 miles east. Our Yukon yard is 233 road miles away, a 5.0 hour drive, so distance is part of planning mobilization for Mineral Wells and nearby rural routes.

Places near Mineral Wells

What would we bore near 4th Avenue in Mineral Wells?

  • Highway crossing: A route beneath US 180 pavement is bored or tunneled, with the utility type and required cover setting the profile.
  • Water service: A new or replacement connection near 4th Avenue can be routed to avoid opening the street surface.
  • Creek crossing: A route under Rock Creek needs depth planning around the channel and a jurisdiction check during planning.
  • Fiber conduit: A run along 5th Avenue starts with locating and exposing marked lines before the drill approaches them.
  • Lake route: Work near Lake Mineral Wells needs a planned path that accounts for the water crossing and access to the bore pits.
  • City utility route: A water project near the City of Mineral Wells system needs the route coordinated with the public water line location.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore near 6th Avenue in Mineral Wells?

For a 6th Avenue quote, start with the address or map pin so we can place the route. Tell us what is going in the ground, such as a water service or fiber conduit, then give the pipe or conduit size and footage. A sketch or plans help show nearby streets, Rock Creek or US 180 crossings that could change the bore layout.

A short, direct service near 6th Avenue with clear access is simpler to plan than a route through Bonti clay, across Rock Creek or beneath US 180. Length and pipe size matter, as do the soil and rock, marked utilities to expose, pavement, creek or drainage crossings, pits and sand backfill. Excavator time and high profile or emergency work can add planning demands. Mobilization also reflects Mineral Wells being 233 road miles from Yukon.

Questions people ask about boring in Mineral Wells

Does Trinity take directional boring work in Mineral Wells and Palo Pinto County?

Yes. Trinity takes directional boring work in Mineral Wells and across Texas, with customer coordination kept with our team from the first call through the bore log. Our own crews and vetted partner drilling contractors can staff work near US 180, so the customer has one point of contact whichever crew is on site.

Who runs Mineral Wells water service and where does the water come from?

The City of Mineral Wells owns and runs the public water system, and its source is surface water. Public records report 14,302 service connections and 15,564 people served. For a bore near 4th Avenue, the exact water line location still needs to be identified before the drill path is set.

Which electric companies report service in Mineral Wells and Palo Pinto County?

Oncor Electric Delivery Company, Texas-New Mexico Power, Tri-County Electric Cooperative and United Electric Cooperative Service report electric service in Palo Pinto and Parker Counties. That list does not identify the provider at every Mineral Wells address. We confirm the line owner before planning conduit near US 281.

Who controls Mineral Wells streets like 2nd Avenue, and must a bore cut them?

Mineral Wells is an incorporated city, so its city streets are under city control. Directional boring can place a line beneath 2nd Avenue without cutting the street surface, subject to the route and site conditions. Marked utilities still need to be exposed before the drill approaches them.

What does Mineral Wells housing age near 5th Avenue mean for replacement bores?

The American Community Survey 2019 to 2023 five year estimates put the median housing year at 1966, with 36% built before 1960. An older service near 5th Avenue may be a replacement project, but the age of a house does not establish the condition or location of its buried line. We pothole marked lines before drilling nearby.

Does Bonti soil in Mineral Wells corrode steel, and what pipe should I use?

The USDA soil survey maps high steel corrosion risk across 76% of Mineral Wells. Bonti is one of the leading mapped soil series, but a survey map is not a site test. The line owner chooses any protection for steel casing or tracer wire; HDPE is not affected by soil corrosion.

Does Trinity cover Cool and rural sites outside Mineral Wells?

Yes. We take work near Cool, 4.2 miles southeast of Mineral Wells, and at rural sites outside the city limits. Garner and Millsap are also nearby. The route, access and ground still shape the plan, especially if the work approaches Rock Creek or a US 180 crossing.

How much 811 notice does a Mineral Wells bore near 4th Avenue need?

For a 4th Avenue bore, make the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. When a Mineral Wells start slips more than 14 days past the original notice, we submit a new request through TxDOT Fort Worth District. At a Rock Creek crossing, we refresh worn or moved marks through Texas811 before work continues.

What affects the cost of a Mineral Wells directional bore under US 180?

A US 180 crossing can take more planning than a short service near 6th Avenue. Length, pipe size, Bonti clay or rock, utilities to expose, pavement, drainage crossings, pits, backfill and excavator time all affect the work. High profile or emergency work and mobilization from Yukon also change the scope.

Where the Mineral Wells facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Mineral Wells

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Mineral Wells, Texas

Type the address of your job in Mineral Wells. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Mineral Wells

Same county: Graford · Strawn · Gordon · Palo Pinto · Mingus · Santo. All counties: Texas county list.