Briar Texas Directional Boring: Duffau Soil, FM 730 and Briar Creek
Quick Answer: Briar is an unincorporated community, so Briar Road and other public streets are under county authority, while FM 730 is a state highway. Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Briar, including routes beneath FM 730 and Briar Creek. Briar is 205 road miles from our Yukon, Oklahoma main office, with Boyd 4.6 miles north. Sandy clay loam is mapped under about 60% of the area at 40 inches, so clay can hold the bore open and grip the pipe.
Briar bores at a glance
- Unincorporated community in Wise County, Tarrant County and Parker County, Texas. Population 7,035 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 205 miles, about 4.3 hours of driving.
- Ground: Duffau soil is mapped on 24 percent of the area, with sandy clay loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 31 percent of the area.
- Highways inside the boundary: FM 730, FM 2048 and FM 2028. State permit office: TxDOT Fort Worth District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Briar Creek, Hog Branch, Swift Branch and Dry Fork.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring near FM 730 in Briar?
Trinity Boring Solutions takes directional boring work in Briar, including water and fiber routes along Briar Road and electric conduit or sewer crossings near FM 730. Briar is an unincorporated community, so its public streets and local permits fall to the county or state rather than a city government. The Census Bureau counted 7,035 people in its 2020 Census count; it does not publish yearly estimates for unincorporated places.
Our main office is in Yukon, Oklahoma, and Briar work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore is roughly 4,100 feet of 48 inch pipe under the Arkansas River in Tulsa. By comparison, a Briar Road service bore is more likely to involve a short utility run through mapped sandy clay loam. For Briar Road planning, our family business began in 1965 and has done directional boring since 1982.

What does the Duffau soil survey show about ground in Briar?
The USDA soil survey maps Duffau soil across 24% of Briar’s soil series, with sandy clay loam common below the surface. At about 40 inches, sandy clay loam is mapped under 60% of the area, while very fine sandy loam covers 22%. The survey reports an average clay content of 24% at that depth, and sandy ground is mapped under 19%. We treat the Duffau, Keeter, Nimrod, and Selden map patterns as mapped soils, not test borings, when reviewing fine sandy loam. On a route near FM 730, the actual soil can change, so the bore plan has to allow for both sand and clay behavior.
| USDA soil survey, inside the Briar mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Duffau 24 percent, Keeter 18 percent, Nimrod 18 percent, Selden 11 percent and Windthorst 8 percent |
| Texture at the surface | fine sandy loam 36 percent, very fine sandy loam 24 percent and fine sand 18 percent |
| Texture about 40 inches down | sandy clay loam 60 percent, very fine sandy loam 22 percent and sandy clay 6 percent |
| Engineering class about 40 inches down | lean clay (CL) 67 percent, clayey sand (SC) 18 percent and silty clay (CL ML) 6 percent |
| Average clay content about 40 inches down | 24 percent |
| Bedrock mapped within 60 inches | 31 percent of the area (0 percent hard rock, 31 percent weathered rock) |
| Seasonal water table within 60 inches | 29 percent of the area |
| Flood prone soils | 5 percent of the area |
| High corrosion risk for uncoated steel | 30 percent of the area |
Weathered bedrock is mapped within 60 inches across 31% of Briar, including 20% with bedrock within 40 inches; hard bedrock is not mapped within 60 inches. The drill may slow where it meets weathered rock, and the soil to rock change can push its path off line. Seasonal water tables are mapped within 60 inches across 29%, so pits near Briar Creek may need pumping. Flood prone soils cover 5%, while high steel corrosion risk covers 30%; the line owner should consider casing and tracer wire materials. The geologic map identifies Paluxy Sand of Aptian age, described as sand, sandstone, mudstone and limestone.
What does it take to bore Briar’s sandy clay loam?
Briar’s sandy clay loam and fine sand call for a plan that holds the hole open without washing out the ground. Along Briar Road, we track the drill head from the surface and log depth and pitch as it advances.
- In Briar’s fine sand, we use drilling fluid to support the hole, ream in stages and have the pipe ready before the final pass.
- Where the mapped sandy clay loam holds tight around a reamer, we adjust fluid and pull the pipe after opening the hole.
- Near the 29% of Briar mapped with a shallow seasonal water table, we keep pits small and pump water when needed.
- At a weathered bedrock contact in Briar, we choose a suitable bit and check depth and pitch often to hold the planned route.

What does a bore have to cross near Briar Creek in Briar?
FM 730, FM 2048 and FM 2028 run inside Briar’s mapped community boundary, so a route may need to cross a state highway as well as local roads. Briar Road has 5.54 miles inside the community, Liberty School Road has 4.41 miles and Boyd Road has 2.36 miles. A bore beneath these roads can keep pavement and driveways intact, with entry and exit pits placed off the traveled surface. There are no highways mapped within 1.5 miles outside the boundary.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 730 | State highway | 9.9 roadway miles inside | State highway office |
| FM 2048 | State highway | 1.4 roadway miles inside | State highway office |
| FM 2028 | State highway | 1.2 roadway miles inside | State highway office |
| Briar Creek | Stream | 4.12 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Hog Branch | Stream | 2.04 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Swift Branch | Stream | 1.89 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Dry Fork | Stream | 1.82 channel miles inside | Checked for Corps of Engineers jurisdiction |
| West Fork Trinity River | Stream nearby | 0.3 miles outside | Checked for Corps of Engineers jurisdiction |
| Walnut Creek | Stream nearby | 0.4 miles outside | Checked for Corps of Engineers jurisdiction |
| Derrett Creek | Stream nearby | 0.7 miles outside | Checked for Corps of Engineers jurisdiction |
| Gilmore Branch | Stream nearby | 1 miles outside | Checked for Corps of Engineers jurisdiction |
| Eagle Mountain Lake | Lake or pond | 8,186 acres, inside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Briar or within 1 mile outside the community boundary, and the mapped street and rail crossing layer shows none. Briar Creek runs 4.12 channel miles inside the community; Hog Branch, Swift Branch and Dry Fork are also mapped streams. The records map 11 street crossings of named streams. Eagle Mountain Lake is inside the boundary, so a route near its shore needs its own crossing review rather than assumptions based on the road map.
Who has to sign off on a Briar bore in Wise County?
For a bore beneath FM 730 in Briar, the TxDOT Fort Worth District reviews the state highway utility permit, and the cover depth is set by the line and crossing. Electric and communication lines need 60 inches below the lowest crossed grade, while water lines need 60 inches and pressurized sewer lines need 60 inches at crossings; the permit can specify another depth. The utility owner files through TxDOT’s online RULIS system, using our bore plan and profile. Briar has no city government, so county roads are handled at the county level. A Briar Creek crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines may already be in the ground in Wise County Briar?
Before we plan a bore on Briar Road, we confirm the specific address’s water provider with Wise County or its local water district. Electric service reported in Wise County includes Oncor Electric Delivery Company, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Tri County Electric Cooperative and Wise Electric Cooperative; that list does not identify the provider at every address. Before an electric conduit bore near Liberty School Road, we confirm the line owner and expose marked utilities by hydrovac potholing before drilling near them.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Oncor Electric Delivery Company, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Tri-County Electric Cooperative and Wise Electric Cooperative | Electric utilities reporting service in Wise County, Tarrant County and Parker County | EIA Form 861 | Confirm the line owner by address |
We treat Briar’s median housing year of 1989 in the American Community Survey 2019 to 2023 five year estimates as context, not a utility location. The survey estimates 6% of homes were built before 1960, 54% from 1960 to 1999 and 40% in 2000 or later. Older blocks may call for replacement lines, while newer areas can need service extensions; the address and route matter more than the age figures alone. Near FM 730, we pothole each marked utility on the bore path because surface locate marks show position, not depth.

Where is Briar in relation to Boyd and the Yukon yard?
Briar is an unincorporated community in Wise, Tarrant and Parker counties, with its mapped area mainly in Wise County. It covers 20.33 square miles at an elevation of 767 feet, and its ZIP codes are 76020 and 76023. Boyd is 4.6 miles north, Aurora is 4.6 miles northeast and Reno is 4.9 miles south. The county seat, Decatur, is 14.3 miles north; Azle, the nearest larger city, is 8.8 miles south. The Yukon yard is 205 road miles away, a 4.3 hour drive.
Places near Briar
- Directional boring in Boyd: 4.6 miles north
- Directional boring in Aurora: 4.6 miles northeast
- Directional boring in Reno: 4.9 miles south
- Directional boring in Newark: 5.1 miles east
- Directional boring in Rhome: 6.3 miles northeast
- Directional boring in Azle: 8.8 miles south
What kinds of bores come up along Briar Road in Briar?
- Highway crossing: A route under FM 730 is bored beneath the pavement, with the utility owner’s TxDOT permit and the required cover guiding the plan.
- Water service: A service along Briar Road starts with confirming the provider for that address and exposing marked lines along the bore path.
- Fiber route: A fiber bore near Liberty School Road can pass beneath driveways without opening the paved surface.
- Creek crossing: A Briar Creek bore needs a profile that stays beneath the channel and a check for federal jurisdiction during planning.
- Electric conduit: Near FM 2048, we confirm the electric line owner and pothole marked utilities before drilling close to them.
- Acreage service: A longer run near Kezer Air Ranch can be planned for water, sewer or conduit with pits set in workable ground.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for a bore near FM 730 in Briar?
For a Briar quote, send the address or map pin, what is going in the ground, pipe or conduit size and footage; a sketch or plans help. A route near FM 730 or Briar Creek can change the work area and crossing plan, so show those features on the map if they are close to the proposed line. Call (405) 409-7423 to discuss the scope.
In Briar, soil and crossing conditions are major price factors because sandy clay loam, fine sand and weathered bedrock can change drilling and reaming time. Creek or drainage crossings such as Briar Creek can add planning and access needs. The route’s length, pipe or conduit size, utilities to expose, pavement, pits, excavator time and sand backfill also matter. A job on FM 730 adds highway permit coordination, and mobilization reflects the 205 road miles from Yukon. We account for TxDOT Fort Worth District permitting on FM 2048, though high profile or emergency work can still change the scope.
Questions people ask about boring in Briar
Does Trinity take directional boring jobs in Briar and Wise County, and who staffs them?
Yes, Trinity takes directional boring work in Briar and serves Wise County. Our own crews and vetted partner contractor crews carry out the work, while you deal with Trinity through the bore log. For a route near FM 730, we review the location, line type and access before setting the bore plan.
Do Briar’s homes and buried lines near Liberty School Road tend to need replacement bores?
The American Community Survey 2019 to 2023 estimates place Briar’s median housing year at 1989, with 54% of homes built from 1960 to 1999. That does not establish the age of a buried line along Liberty School Road, so we check the actual route and expose marked utilities before a replacement bore approaches them.
Could groundwater or flood prone ground affect bore pits near Briar Creek in Briar?
It can. The USDA soil survey maps a seasonal water table within 60 inches across 29% of Briar and flood prone soils across 5%. Near Briar Creek, we plan pit locations and depth for wet ground and review the creek crossing for U.S. Army Corps of Engineers jurisdiction.
Can Briar’s Duffau soil corrode steel, and what pipe should a bore use?
The soil survey maps high steel corrosion risk across 30% of Briar, including areas with Duffau soil. The line owner selects any coating for steel casing or tracer wire; HDPE does not carry the mapped steel corrosion concern. The material choice depends on the line design and the actual site conditions.
What ground does a directional bore pass through in Briar near Duffau soil?
Briar’s soil map includes Duffau and sandy clay loam, with sandy clay loam mapped under 60% of the area at about 40 inches. Fine sand is mapped at that depth under 19% of the area. Those mapped patterns are not test borings, so the route near Briar Road may encounter a different mix.
Is there rock near the surface on a Briar bore route?
The USDA soil survey maps bedrock within 60 inches across 31% of Briar, and within 40 inches across 20%. The mapped bedrock is weathered; hard bedrock is not mapped within 60 inches. A bore near FM 730 may still meet slower ground at a soil and rock contact, so the route needs field tracking.
How much notice does Texas811 need for a Briar Road bore, and what if marks move?
For a bore along Briar Road, submit the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If the start slips more than 14 days after the original notice, submit a new request. Refresh marks that wear off or move before work continues.
How far is Briar from the Yukon office, and does nearby Azle affect the job?
From our Yukon, Oklahoma main office, Briar is 205 road miles away, and the 4.3 hour drive shapes our scheduling. Azle is 8.8 miles south of Briar, but the job’s access and route determine mobilization rather than proximity alone. A map showing the work area and any nearby FM 730 crossing helps us assess the trip.
What affects directional boring costs on FM 730 in Briar?
The job’s length, pipe or conduit size, soil and rock, exposed utilities, pavement, pits and creek crossings all affect the price. At FM 730, highway permit coordination matters; near Briar Creek, crossing conditions can add planning. Mobilization also reflects the 205 road miles from Yukon, and emergency work can change the scope.
Where the Briar facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Briar
- U.S. Census Bureau, TIGER/Line 2024: Briar boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Briar population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Briar housing units and year built
- Macrostrat geologic map compilation: map units under Briar
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Wise County, Tarrant County and Parker County
- U.S. Geological Survey, Elevation Point Query Service: Briar elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Briar
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Briar
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Briar, Texas
Type the address of your job in Briar. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Briar
County: Parker County directional boring. Same county: Weatherford · Willow Park · Aledo · Springtown · Annetta · Hudson Oaks · Fort Worth · Western Lake · Dennis · Cresson · Horseshoe Bend · Annetta South. All counties: Texas county list.
