trinityboringsolutions.com

Sonterra Texas Directional Boring: Austin Silty Clay, Donahoe Creek and Interstate 35

Quick Answer: Sonterra is an unincorporated community, so Williamson County or the state owns its streets; Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), for routes near Donahoe Creek. From our Yukon, Oklahoma main office, Sonterra is 362 road miles away, and Hugh Smith Lane is one of the streets that can shape access. The USDA soil survey maps Austin silty clay across much of Sonterra. Clay can cling to a reamer and grip pipe, so we plan staged reaming and a same day pull.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Sonterra bores at a glance

  • Unincorporated community in Williamson County, Texas. Population 7,679 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 362 miles, about 6.9 hours of driving.
  • Ground: Austin soil is mapped on 55 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 95 percent of the area.
  • No state or US highway is mapped inside the boundary. Closest: Interstate 35.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Donahoe Creek and Willis Creek.
  • Public water: Sonterra Municipal Utility District, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles Sonterra directional boring near Donahoe Creek?

Trinity Boring Solutions takes directional boring work in Sonterra, an unincorporated community in Williamson County where Donahoe Creek is one route constraint. Sonterra has no city government, so streets belong to Williamson County or the state, depending on the road. The Census Bureau counted 7,679 residents in 2020 and does not publish yearly estimates for unincorporated places. Along streets such as Hugh Smith Lane and Sonterra Boulevard, we install water, sewer, gas, electric conduit and fiber.

Our main office is in Yukon, Oklahoma, and Sonterra work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our reach includes a roughly 4,100 foot, 48 inch pipe bore under the Arkansas River in Tulsa; beside that, a Sonterra job is more likely a service or utility run through Austin silty clay, with its route and crossings shaping the plan. Trinity began as a family business in 1965 and has done directional boring since 1982.

Aerial view of Trinity Boring Solutions crew and service van at a multifamily apartment underground utility jobsite in Oklahoma City
Our crew and service van at a multifamily underground utility job in Oklahoma City, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What is Sonterra Austin soil like to bore?

Sonterra’s mapped Austin and Castephen soils are mostly silty clay, which can hold a bore open but stick to the reamer. The USDA soil survey maps Austin soil across 55 percent of the area, Castephen across 37 percent and Houston Black across 5 percent. Silty clay is the surface texture across 92 percent of the mapped community. At about 40 inches below the surface, the survey maps bedrock in 95 percent of the area and clay in 5 percent, with no sandy ground mapped at that depth. We treat Austin, Castephen, and Houston Black as mapped soil series, not as test borings for Sonterra boring plans.

USDA soil survey, inside the Sonterra mapped community boundaryWhat is mapped
Soil series mappedAustin 55 percent, Castephen 37 percent and Houston Black 5 percent
Texture at the surfacesilty clay 92 percent and clay 5 percent
Texture about 40 inches downbedrock 95 percent and clay 5 percent
Engineering class about 40 inches downfat clay (CH) 5 percent
Average clay content about 40 inches down54 percent
Bedrock mapped within 60 inches95 percent of the area (0 percent hard rock, 95 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel91 percent of the area

The survey maps weathered bedrock within 60 inches across 95 percent of Sonterra, with typical bedrock depth at 24 inches. Austin Chalk, a Late Cretaceous geologic unit, is mapped here, so the actual route may move from sticky clay into slower drilling through weathered chalk. No seasonal water table or flood prone soils are mapped. High steel corrosion risk is mapped across 91 percent of the area, so the line owner should consider casing and tracer wire materials; HDPE avoids that soil corrosion concern.

How do we drill in Sonterra where bedrock is shallow?

For Sonterra’s Austin silty clay and mapped shallow weathered bedrock, we adjust fluid and reaming to the ground rather than forcing one pace. Donahoe Creek and nearby marked utilities also shape the route and checks.

  1. Austin silty clay can pack onto the reamer, so we use a thinner fluid mix with polymer and open the bore in stages before pulling pipe.
  2. The survey maps bedrock at about 24 inches in typical areas; where the route enters weathered Austin Chalk, we slow down and use a bit suited to softer rock.
  3. Because Sonterra’s clay can swell around pipe, we plan to pull the product line the same day the bore is opened rather than leave the hole waiting.
  4. Near Donahoe Creek or marked street utilities, we expose each marked line with hydrovac before drilling close and track the drill head from the surface.
Trinity Boring Solutions crew in hard hats at the exit pit with rock tooling on a sandstone bore in Guthrie, OK
Our crew at the exit pit with rock tooling on a sandstone bore in Guthrie, Oklahoma.

What does a bore have to cross in Sonterra near Hugh Smith Lane?

Interstate 35 runs along or touches Sonterra’s mapped community boundary, but no highway is mapped inside the community. A bore that enters highway right of way needs TxDOT review, while a route along local roads such as Hugh Smith Lane, Limestone Terrace or Sonterra Boulevard follows the road owner’s requirements. Those are among the longest named streets in Sonterra. Boring can keep pavement and driveways intact, but the planned path still has to account for concrete, access and the utilities beneath each street.

CrossingTypeMapped extentWho has a say
Interstate 35Highway nearbyRuns along or touches the city limitsState highway office
Donahoe CreekStream0.26 channel miles insideChecked for Corps of Engineers jurisdiction
Willis CreekStream0.03 channel miles insideChecked for Corps of Engineers jurisdiction
Wills CreekStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Sonterra or within one mile outside it, and no street and rail crossing is mapped. Donahoe Creek runs 0.26 channel miles inside the community, while Willis Creek runs 0.03 miles; Wills Creek is 0.1 miles outside. Public records map one street crossing of a named stream. Creek work needs a route planned around the channel, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction. For boring plans near Donahoe Creek, we see no lakes or ponds mapped within one mile.

Who approves a Sonterra bore in Williamson County?

Sonterra has no city government, so a street permit is handled by Williamson County or the state according to who owns the road. Interstate 35 borders the mapped community, and work in its right of way requires a TxDOT utility permit reviewed by the Austin District. The utility owner, not the drilling contractor, submits the application through TxDOT’s RULIS system; we prepare the bore plan and profile for that filing. For Interstate 35 pavement, TxDOT requires boring or tunneling beneath existing highway pavement, so we plan the crossing through the TxDOT Austin District. A Donahoe Creek route is checked for federal waterway jurisdiction during planning, and no railroad crossing is mapped here.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities serve Sonterra near Sonterra Municipal Utility District?

Sonterra Municipal Utility District owns the public water system, which uses purchased surface water and reports 9,221 service connections serving 16,614 people. A water route near Donahoe Creek still needs the actual buried line locations checked before drilling. Utilities reporting electric service in Williamson County include Oncor Electric Delivery Company, Austin Energy, City of Georgetown, Bartlett Electric Cooperative, Bluebonnet Electric Cooperative and Pedernales Electric Cooperative. Those countywide reports do not identify the provider at every Sonterra address, so we confirm the line owner before planning an electric conduit bore.

Line ownerWhat it isSourceSize
Sonterra Municipal Utility DistrictPublic water systemSurface water bought from another system9,221 connections, 16,614 people served
Oncor Electric Delivery Company, Austin Energy, City of Georgetown, Bartlett Electric Cooperative, Bluebonnet Electric Cooperative and Pedernales Electric CooperativeElectric utilities reporting service in Williamson CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Sonterra’s median housing year at 2015; 97 percent of housing units date to 2000 or later, and 1 percent were built before 1960. That newer housing mix can mean service extensions as well as replacement work along streets such as Limestone Terrace. Before the drill approaches a marked line, we hydrovac pothole it to establish its depth. Paint on Sonterra’s pavement shows a utility’s position, not how deep it sits.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

Do you cover Sonterra and nearby Serenada?

We take directional boring work in Sonterra and the surrounding Williamson County area, including routes toward Serenada. Sonterra covers 2.37 square miles, sits at 868 feet elevation and uses ZIP code 76537. Jarrell is 1.1 miles west, while Serenada is 8.7 miles southwest and Weir is 9.0 miles south. Georgetown, the county seat and nearest larger city, is 11.4 miles southwest. From our Yukon, Oklahoma main office, the road distance is 362 miles and the drive is 6.9 hours, which is part of planning access and mobilization for a Sonterra job.

Places near Sonterra

What kinds of bores come up around Sonterra Boulevard?

  • Highway crossing: A route near Interstate 35 needs a bore plan for the TxDOT Austin District and boring beneath existing highway pavement.
  • Water service: A connection near Sonterra Municipal Utility District lines needs the buried route located before drilling along a Sonterra street.
  • Fiber conduit: A run along Hugh Smith Lane can keep the street surface intact while the conduit passes beneath marked utilities.
  • Creek crossing: A Donahoe Creek route needs channel aware planning and a check for U.S. Army Corps of Engineers jurisdiction.
  • Street replacement: A water or sewer bore near Limestone Terrace can pass beneath pavement instead of opening a trench across the road.
  • Electric conduit: Near Sonterra Boulevard, we confirm the electric line owner and pothole marked lines before drilling the proposed path.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for a bore near Druse Lane in Sonterra?

For a quote near Druse Lane, send the address or map pin, what will go in the ground, the pipe or conduit size and the footage; a sketch or plans help us review the route. Include nearby crossings such as Sonterra Boulevard or Donahoe Creek so we can assess access, utilities and the ground along the proposed path.

A straight service run on a Sonterra street with clear access and few marked utilities is simpler to plan than a route with several exposed lines. Length, pipe or conduit size, Austin silty clay and weathered bedrock all affect the work. Crossings of Interstate 35, concrete or Donahoe Creek can add planning, pits or equipment time. We account for the 362 road miles from Yukon to Sonterra when scheduling mobilization for underground work. Emergency timing and a high profile route change the scope as well.

Questions people ask about boring in Sonterra

Does Trinity Boring Solutions take directional boring jobs in Williamson County’s Sonterra, and who staffs them?

Yes, we take directional boring work in Sonterra and staff it with our own crews or with partner drilling contractors whose work we have personally vetted. Trinity remains the customer’s contact from the first call through the bore log, whichever crew is on site. That applies to routes near Hugh Smith Lane as well as other Williamson County locations.

Who runs Sonterra’s public water system in Williamson County, and where does it get water?

Sonterra Municipal Utility District owns the public water system, and its source is purchased surface water. In Sonterra, public records list 9,221 service connections and 16,614 people served, figures we factor into underground utility coordination. Before a bore near Donahoe Creek or a neighborhood street, we locate the actual water lines along the proposed route.

Which electric companies report service in Williamson County’s Sonterra, and who confirms conduit requirements?

Oncor Electric Delivery Company, Austin Energy, City of Georgetown, Bartlett Electric Cooperative, Bluebonnet Electric Cooperative and Pedernales Electric Cooperative report electric service in Williamson County. That list does not say which provider serves a particular Sonterra address. We confirm the line owner and conduit requirements before planning a bore near streets such as Sonterra Boulevard.

Does the county or a city control Sonterra Boulevard, and can a bore avoid cutting it?

Sonterra has no city government, so Williamson County or the state controls its streets according to road ownership. A directional bore along Sonterra Boulevard can pass below pavement instead of cutting across it, subject to the road owner’s requirements. We plan the route around marked utilities and access points.

What do Sonterra’s housing age and buried lines near Limestone Terrace mean for replacement bores?

Sonterra’s housing is relatively new in the survey record, with a median year built of 2015, but that does not establish the age of any buried line. Replacement work near Limestone Terrace still needs the existing pipe located and exposed where it crosses the bore path. A route may also serve newer connections.

Does Austin soil in Sonterra corrode steel, and what pipe should a bore use?

The USDA soil survey maps high steel corrosion risk across 91 percent of Sonterra. The line owner chooses suitable casing and tracer wire materials for the project; HDPE is not affected by this soil corrosion concern. Austin silty clay also calls for attention to reaming and fluid so the hole does not grip the product pipe.

How much notice does Texas811 need for a Sonterra bore near Hugh Smith Lane, and what if marks move?

For a bore near Hugh Smith Lane, submit a Texas811 locate request at least two working days before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. On Hugh Smith Lane, we submit a new request if the start slips more than 14 days past the original notice. Before we continue boring near Donahoe Creek, we have worn or moved marks refreshed through Texas811.

How far is Sonterra from Georgetown and Trinity’s Yukon, Oklahoma main office, and does that change the job?

Sonterra is 362 road miles and a 6.9 hour drive from Trinity’s Yukon, Oklahoma main office. Georgetown is 11.4 miles southwest of Sonterra. The distance from Yukon can affect mobilization planning, while access near Interstate 35 and the proposed bore length help define the work.

What affects directional boring cost in Sonterra near Interstate 35?

The job’s length and pipe or conduit size matter, along with Austin silty clay, weathered bedrock and the number of utilities that need exposure. A route near Interstate 35 may need highway permitting and a bore beneath pavement. Donahoe Creek, concrete, pits, equipment time and mobilization from Yukon can also change the scope.

Where the Sonterra facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Sonterra

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Sonterra, Texas

Type the address of your job in Sonterra. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Sonterra

Same county: Round Rock · Leander · Cedar Park · Austin · Hutto · Brushy Creek · Taylor · Liberty Hill · Florence · Granger · Thrall · Coupland. All counties: Texas county list.