trinityboringsolutions.com

La Puerta Texas Directional Boring: Reynosa Silty Clay Loam, US 83 And Olmitos Creek

Quick Answer: From our Yukon main office, 742 road miles from La Puerta, our crews take directional boring, also called horizontal directional drilling (HDD), for routes beneath US 83. We staff La Puerta jobs with our crews and vetted partner drilling contractors, including work along 2nd Street. The USDA soil survey maps Reynosa silty clay loam across 44 percent of the area, so sticky clay can build on a reamer. We adjust fluid and ream in stages before pulling pipe.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

La Puerta bores at a glance

  • Unincorporated community in Starr County, Texas. Population 638 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 742 miles, about 14.4 hours of driving.
  • Ground: Reynosa soil is mapped on 44 percent of the area, with silty clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 83 and FM 1430. State permit office: TxDOT Pharr District.
  • Railroad track inside the boundary: Border Pacific Railroad, with 2 mapped street and rail crossings.
  • Named streams inside the boundary: Olmitos Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring near 2nd Street in La Puerta?

La Puerta work is handled by Trinity from 742 road miles away at our Yukon yard, with our own crews and vetted partner crews assigned to routes such as 2nd Street. The Census Bureau counted 638 people here in the 2020 Census. We install water, sewer, gas, electric conduit and fiber, including lines routed beneath streets such as Railway Street or toward US 83.

Our main office is in Yukon, Oklahoma, and La Puerta work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have been boring since 1982, after our family business began in 1965. That experience helps us plan for La Puerta’s mapped silty clay loam, where sticky cuttings can collect on the reamer and slow a pull.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What is La Puerta ground like for a bore through Reynosa soil?

La Puerta ground is largely mapped as Reynosa soil, which calls for planning around clay that can cling to drilling tools. The USDA soil survey maps Reynosa across 44 percent of the area, and Reynosa silty clay loam is the largest named map unit. At about 40 inches below the surface, silty clay loam is mapped across 44 percent, with average clay content of 32 percent. Heavy clay is mapped across 24 percent at that depth, while no sandy area is mapped there. These are mapped patterns, not site specific test results.

USDA soil survey, inside the La Puerta mapped community boundaryWhat is mapped
Soil series mappedReynosa 44 percent, Jimenez 29 percent and Matamoros 24 percent
Texture at the surfacesilty clay loam 44 percent, very gravelly loam 29 percent and silty clay 24 percent
Texture about 40 inches downsilty clay loam 44 percent, variable 31 percent and stratified very fine sandy loam to silty clay to clay 24 percent
Engineering class about 40 inches downlean clay (CL) 45 percent and fat clay (CH) 24 percent
Average clay content about 40 inches down32 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils24 percent of the area
High corrosion risk for uncoated steel24 percent of the area

Bedrock is not mapped in the top five feet of La Puerta, though the geologic map includes Rio Grande terrace deposits of gravel, sand, silt and clay, plus the Catahoula Formation and Frio Clay, undivided, of Oligocene age. No seasonal water table is mapped within 60 inches, but flood prone soils cover 24 percent of the area. Across La Puerta, high steel corrosion risk is mapped across 24 percent, so we consider casing and tracer wire materials for each bore. Olmitos Creek makes the mapped flood prone ground relevant to route and depth planning.

How do we drill La Puerta’s silty clay loam?

For La Puerta’s mapped silty clay loam, we control fluid and ream in stages so sticky cuttings do not bog down the bore. Along streets such as 2nd Street, we also protect pavement by managing returns and checking marked utilities before drilling nearby.

  1. Reynosa silty clay loam can stick to the reamer, so we use thinner fluid with polymer and open the hole in stages before pulling pipe.
  2. At US 83, we watch drilling fluid returns closely and keep pressure controlled to reduce the chance of lifting pavement.
  3. Before approaching marked utilities along 2nd Street, we expose them with hydrovac because locate paint shows position but not depth.
  4. Near Olmitos Creek, we plan the bore below the channel and check crossing jurisdiction; the mapped flood prone soils cover 24 percent of the area.
Open bore pit in red Oklahoma dirt with white PVC conduit stub ups and an orange safety barrier
An open bore pit in red Oklahoma dirt with PVC conduit stubbed up and a safety barrier around it.

Where might a La Puerta bore pass under US 83?

A La Puerta bore can be planned beneath US 83, which has 1.1 mapped roadway miles inside the community boundary. FM 1430 adds 0.2 roadway miles, so the route and road owner matter when setting the bore path. The longest named street is 2nd Street at 1.1 miles, followed by Railway Street at 0.58 miles and Guevarra Street at 0.39 miles. Boring can keep pavement intact, but the entry and exit pits still need suitable space beside the route.

CrossingTypeMapped extentWho has a say
US 83US highway1.1 roadway miles insideState highway office
FM 1430State highway0.2 roadway miles insideState highway office
Border Pacific RailroadRailroad0.61 track miles insideThe railroad
Olmitos CreekStream0.29 channel miles insideChecked for Corps of Engineers jurisdiction
Scs 7Lake or pond81 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

The Border Pacific Railroad has 0.61 track miles in La Puerta, and public mapping shows 2 street and rail crossings. A track bore needs an agreement from the railroad owner, which sets crossing requirements. Olmitos Creek has 0.29 channel miles inside the community boundary, with 1 mapped street crossing of a named stream. Scs 7 is an 81 acre lake within one mile, outside the boundary. A creek or lake crossing is checked for federal jurisdiction during planning.

Who approves a La Puerta bore in Starr County?

For a La Puerta bore beneath US 83 or FM 1430, TxDOT controls highway right of way, and its Pharr District reviews the utility permit. The utility owner, not the drilling contractor, files through TxDOT’s RULIS system; we provide the bore plan and profile for that application. Because La Puerta is an unincorporated community, it has no city government, so local streets such as Guevarra Street fall under county authority. A crossing of Border Pacific Railroad track also needs an agreement from the railroad owner. Olmitos Creek is checked for U.S. Army Corps of Engineers jurisdiction during crossing planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose buried lines should we check in Starr County near La Puerta?

For a La Puerta address, we confirm the water provider with the county or local water district before planning a bore. EPA drinking water records for Texas do not tie systems to towns, and no system carries this place’s name, so a provider could not be matched. AEP Texas Central, Magic Valley Electric Cooperative and Medina Electric Cooperative report electric service in Starr County. We confirm the owner for the address before planning an electric conduit bore near 2nd Street.

Line ownerWhat it isSourceSize
AEP Texas Central, Magic Valley Electric Cooperative and Medina Electric CooperativeElectric utilities reporting service in Starr CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

American Community Survey 2019 to 2023 five year estimates put La Puerta’s median housing year at 1987, with all housing units mapped in the 1960 to 1999 era. None are mapped before 1960 or from 2000 onward. A replacement line along Railway Street may need a different route from a new service. Before the drill approaches marked utilities, we use hydrovac potholing to expose them; paint shows position, not depth.

Coiled black HDPE conduit fitted with a pulling grip staged on a lawn along a completed bore path
Coiled HDPE conduit fitted with a pulling grip, staged on a lawn along a finished bore path.

Do you cover La Puerta and nearby El Refugio?

Yes, we take directional boring work in La Puerta and nearby El Refugio, both in Starr County. La Puerta is at an elevation of 158 feet and covers 0.32 square miles within its mapped community boundary. ZIP code 78582 serves the area. El Refugio is 0.7 miles southwest, while Garza-Salinas II is 0.7 miles northwest and B and E is 0.7 miles north. Rio Grande City, the county seat and nearest larger city, is 5.0 miles northwest. Our Yukon yard is 742 road miles away, a 14.4 hour drive, so distance is part of mobilization planning for a La Puerta job.

Places near La Puerta

Which La Puerta jobs call for a bore near Railway Street?

  • Highway crossing: A route beneath US 83 needs a bore plan that accounts for the highway pavement and the required TxDOT utility permit.
  • Street service: A water or sewer service routed near Railway Street can avoid an open cut across pavement when pits fit on each side.
  • Fiber conduit: A conduit route along 2nd Street starts with utility exposure so the drill path clears buried lines.
  • Rail crossing: A line beneath Border Pacific Railroad needs the railroad owner’s agreement before the crossing is planned.
  • Creek crossing: A bore beneath Olmitos Creek needs channel depth planning and a check for federal jurisdiction.
  • Electric conduit: Near Guevarra Street, we confirm the address specific line owner before planning an electric conduit bore.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a La Puerta bore near Lito Garza Street?

For a La Puerta quote, start with the address or map pin, such as a point on Lito Garza Street. Tell us what will go underground, whether it is a water line or fiber conduit, then give the pipe or conduit size and footage. A sketch or plans help us check the path around US 83, nearby utilities and any creek crossing before we scope the work.

A short route on Lito Garza Street with clear access and no difficult crossings is simpler to plan than a long bore beneath US 83 or Border Pacific Railroad. Price depends on footage, pipe size, soil, utility crossings, pavement, creek access, pits, excavator time and backfill. La Puerta’s sticky Reynosa silty clay loam can call for staged reaming, while Olmitos Creek adds crossing planning. Mobilization planning accounts for 742 road miles from Yukon, which shapes how we schedule equipment for La Puerta work. High profile or emergency work can require more planning.

Questions people ask about boring in La Puerta

Does Trinity take directional boring jobs in La Puerta, Starr County, and how are crews assigned?

Yes, we take La Puerta jobs in Starr County and assign the work to our own crews or vetted partner drilling contractors. You work with Trinity from the initial call through the bore log, regardless of which crew is on site. For a route near 2nd Street, the address and job scope help us plan the crew and equipment.

Can you bore a line under Olmitos Creek in La Puerta?

A bore under Olmitos Creek can be considered, with the path planned to pass beneath the channel. The creek has 0.29 channel miles inside La Puerta, and mapped flood prone soils cover 24 percent of the area. At La Puerta crossings, we check whether the US Army Corps of Engineers has jurisdiction before setting the boring plan.

Who owns electric lines in La Puerta, Starr County, and who confirms conduit specs?

AEP Texas Central, Magic Valley Electric Cooperative and Medina Electric Cooperative report electric service in Starr County, but that does not identify the owner at every La Puerta address. We confirm the specific line owner before planning a conduit bore near a street such as Guevarra Street. The owner can confirm the conduit requirements for its line.

Does La Puerta or Starr County control Guevarra Street, and can a bore avoid cutting it?

La Puerta has no city government, so Guevarra Street is under county authority rather than a city government. Directional boring can pass beneath a street without cutting its pavement when the route and pits work for the site. We check the street setting and expose marked utilities before drilling near them.

How old are the homes and buried lines near Railway Street in La Puerta?

The American Community Survey 2019 to 2023 estimates put La Puerta’s median housing year at 1987, with all housing units in the 1960 to 1999 era. That gives a useful age context, but it does not date a specific buried line near Railway Street. For replacement work, we pothole marked lines before drilling near them.

Is groundwater or flood prone ground a problem for La Puerta bore pits near Olmitos Creek?

No seasonal water table is mapped within 60 inches in La Puerta, but that does not rule out wet conditions at a particular Olmitos Creek site. Flood prone soils are mapped across 24 percent of the area. We plan pit placement and bore depth for the creek crossing and check conditions at the work location.

Can I call Trinity after hours about an urgent bore near Guevarra Street in La Puerta?

Yes, call (405) 409-7423; a person answers 24 hours a day. We can discuss an urgent bore near Guevarra Street and what the route involves. Details such as the address, line type and whether the work approaches US 83 help us understand the request.

How much notice does Texas811 need for a La Puerta bore on 2nd Street, and what if marks move?

For a bore on 2nd Street, Texas law requires a locate request at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If La Puerta work slips more than 14 days past the original notice, we submit a new request before proceeding. Before La Puerta work resumes, we have worn or moved marks refreshed through Texas811 to keep the bore route properly marked.

What affects the cost of a La Puerta bore beneath US 83?

The scope of a US 83 bore depends on length, pipe or conduit size, Reynosa soil, utility crossings, pavement and pit access. A Border Pacific Railroad or Olmitos Creek crossing adds planning needs. Excavator time, backfill, emergency timing and mobilization from Yukon also affect the work. The route and site details determine what the job requires.

Where the La Puerta facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in La Puerta

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in La Puerta, Texas

Type the address of your job in La Puerta. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for La Puerta

Same county: Roma · Las Lomas · Escobares · La Grulla · Mikes · East Alto Bonito · West Alto Bonito · Mesquite · Valle Vista · El Chaparral · Garceno · Alto Bonito Heights. All counties: Texas county list.