trinityboringsolutions.com

Commerce Texas Directional Boring: Crockett Loam, Middle Sulphur River, Highway 24

Quick Answer: Crockett loam covers much of Commerce, and its clay can stick to a reamer and grip pipe. We provide directional boring, also called horizontal directional drilling (HDD), for lines crossing Texas State Highway 24 and other Commerce routes. The Yukon main office is 236 road miles away, so mobilization is part of planning a bore near Park Street. Clay calls for staged reaming and a same day pull after opening the hole.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Commerce bores at a glance

  • Incorporated city in Hunt County, Texas. Population 9,800 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 236 miles, about 5 hours of driving.
  • Ground: Crockett soil is mapped on 49 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 58 percent of the area.
  • Highways inside the boundary: Texas State Highway 24, Texas State Highway 50, Texas State Highway 11, Loop 178 and Texas State Highway 224. State permit office: TxDOT Paris District.
  • Railroad track inside the boundary: a short line railroad (reporting mark NTRW), with 10 mapped street and rail crossings.
  • Named streams inside the boundary: Middle Sulphur River and Willow Oak Creek.
  • Public water: City of Commerce, surface water.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring near Texas State Highway 24 in Commerce?

Crockett loam and clay shape drilling conditions in Commerce, Hunt County. Commerce’s Census Bureau Vintage 2024 estimate is 9,800, a population figure we consider when planning underground work. We install water, sewer, gas, electric conduit and fiber lines along routes such as Park Street and Texas State Highway 24. The line type and size help determine the bore plan.

Our main office is in Yukon, Oklahoma, and Commerce work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and we have drilled since 1982; the 3/4 inch service line to 48 inch casing range suits work from Park Street utility runs to larger highway crossings.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

How does Crockett soil affect directional boring in Commerce?

The USDA soil survey maps Crockett as the leading soil series in Commerce, covering 49 percent of the city. Crockett loam is mapped across 20 percent, while the Crockett Urban land complex is mapped across 24 percent. At about 40 inches below the surface, clay is the mapped texture across 91 percent of the area, and the average clay content at that depth is 47 percent. That heavy clay can hold an open hole, but it may ball on the reamer and grip the pipe.

USDA soil survey, inside the Commerce city limitsWhat is mapped
Soil series mappedCrockett 49 percent, Wilson 14 percent, Kaufman 9 percent, Ferris 9 percent and Leson 7 percent
Texture at the surfaceloam 55 percent, clay 27 percent and silt loam 14 percent
Texture about 40 inches downclay 91 percent, clay loam 5 percent and silty clay loam 3 percent
Engineering class about 40 inches downfat clay (CH) 63 percent and lean clay (CL) 36 percent
Average clay content about 40 inches down47 percent
Bedrock mapped within 60 inches58 percent of the area (0 percent hard rock, 58 percent weathered rock)
Seasonal water table within 60 inches20 percent of the area
Flood prone soils16 percent of the area
High corrosion risk for uncoated steel99 percent of the area

Weathered bedrock is mapped within 60 inches across 58 percent of Commerce, with typical bedrock depth at 50 inches; that can slow drilling and call for a soil bit suited to weathered rock. Seasonal water tables are mapped within 60 inches across 20 percent, so pits may need pumping. Flood prone soils cover 16 percent, including areas to consider near the Middle Sulphur River. With high steel corrosion risk mapped across 99 percent, we account for corrosion exposure in Commerce boring plans. The Navarro Group, undivided, is Late Cretaceous and includes silty clay and sandstone beds, so field conditions can change along a bore.

How do crews bore through clay in Commerce?

Commerce has clay rich soil at depth, including Crockett loam and mapped CH and CL soils. We adjust the drilling fluid and reaming sequence to keep the hole stable without pushing fluid toward pavement on Park Street.

  1. For Crockett clay, we use a thinner fluid blend and polymer, then ream in stages so sticky soil is less likely to build up on the tools.
  2. Where Texas State Highway 24 has pavement, we manage fluid pressure to reduce the chance of lifting the surface and log drill depth and pitch.
  3. Near the Middle Sulphur River, we plan the bore depth below the channel and check for Corps jurisdiction while laying out the crossing.
  4. Before drilling near the City of Commerce water system or an electric line, we hydrovac pothole each marked utility to verify its depth.
Rod box on the Vermeer D24x40 S3 Navigator with the bore path heading toward the trees on a rock bore in Guthrie, OK
Rod box on our Vermeer D24x40 with the bore path heading toward the trees on a rock bore in Guthrie, Oklahoma.

Where might a bore pass under Middle Sulphur River in Commerce?

Texas State Highway 24 has 7.5 mapped roadway miles in Commerce, and Texas State Highway 50 has 6.8. Texas State Highway 11, Loop 178 and Texas State Highway 224 also run inside the limits. On local streets, Park Street is the longest named route at 2.26 miles, followed by Culver Street at 2.24 miles and Maple Street at 2.03 miles. Boring can avoid cutting through paved routes, with entry and exit pits placed off the travel surface where the site allows.

CrossingTypeMapped extentWho has a say
Texas State Highway 24State highway7.5 roadway miles insideState highway office
Texas State Highway 50State highway6.8 roadway miles insideState highway office
Texas State Highway 11State highway4 roadway miles insideState highway office
Loop 178State highway3.3 roadway miles insideState highway office
Texas State Highway 224State highway2.8 roadway miles insideState highway office
FM 3218State highway1.7 roadway miles insideState highway office
Texas State Highway 24 BusinessState highway1.6 roadway miles insideState highway office
FM 71State highway1.1 roadway miles insideState highway office
FM 2874State highway0.2 roadway miles insideState highway office
a short line railroad (reporting mark NTRW)Railroad4.04 track miles insideThe railroad
Middle Sulphur RiverStream1.08 channel miles insideChecked for Corps of Engineers jurisdiction
Willow Oak CreekStream0.25 channel miles insideChecked for Corps of Engineers jurisdiction
South Sulphur RiverStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Dunbar CreekStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

A short line railroad (reporting mark NTRW) has 4.04 track miles inside Commerce, with 10 mapped street and rail crossings. Any bore under its track needs an agreement from the railroad, which sets the crossing conditions. The Middle Sulphur River runs 1.08 channel miles in the city, and six street crossings of named streams are mapped. Round House Pond is also inside the limits. River, creek and lake crossings are checked for Corps jurisdiction during planning.

What permits apply to Commerce work in Hunt County?

Commerce is incorporated, so its city streets belong to the city itself; Texas State Highway 24, Texas State Highway 50 and other state routes fall under TxDOT. For state right of way, the line owner, not the driller, submits the utility permit application through RULIS to the TxDOT Paris District. For utility work in Commerce, we provide the bore plan and profile for the utility owner’s application. TxDOT rules set cover depths by line type, and the permit may require a different depth. A crossing beneath the NTRW track also needs an agreement from the railroad. A Middle Sulphur River crossing is checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the water lines served by City of Commerce in Commerce?

The City of Commerce public water system uses surface water and reports 6,927 service connections serving 9,266 people. For potholing near its water lines, we expose marked utilities before drilling approaches them. Electric service reported in Hunt County includes Oncor Electric Delivery Company, Texas-New Mexico Power, City of Greenville, Fannin County Electric Cooperative, Farmers Electric Cooperative and Trinity Valley Electric Cooperative. We confirm the line owner before sizing or placing an electric conduit bore.

Line ownerWhat it isSourceSize
City of CommercePublic water systemSurface water6,927 connections, 9,266 people served
Oncor Electric Delivery Company, Texas-New Mexico Power, City of Greenville, Fannin County Electric Cooperative, Farmers Electric Cooperative and Trinity Valley Electric CooperativeElectric utilities reporting service in Hunt CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put the median housing year in Commerce at 1975; 18 percent of homes date from before 1960, and 24 percent were built in 2000 or later. That mix can mean replacement work on older lines as well as new service runs near Park Street. Before a bore crosses marked water or electric lines, our crews use hydrovac potholing to expose them; paint shows a line’s position, not its depth.

Coiled black HDPE conduit fitted with a pulling grip staged on a lawn along a completed bore path
Coiled HDPE conduit fitted with a pulling grip, staged on a lawn along a finished bore path.

Where is Commerce in relation to Neylandville?

Commerce is an incorporated city in Hunt County, covering 8.32 square miles at an elevation of 532 feet. Its ZIP code is 75428. Campbell is 7.2 miles southwest, and Neylandville is 7.5 miles southwest; Cumby is 8.1 miles southeast. Greenville, the county seat and nearest larger city, is 15.1 miles southwest. The Yukon main office is 236 road miles away, about a five hour drive. That distance is part of planning crew mobilization for work along Texas State Highway 24 or rural routes outside Commerce.

Places near Commerce

What kinds of bores come up near Park Street in Commerce?

  • Highway crossing: A bore beneath Texas State Highway 24 can pass under the pavement instead of cutting across its travel lanes.
  • Water service: A service connection near Park Street can be routed toward the City of Commerce system with marked lines exposed before drilling.
  • Fiber route: A conduit run along Culver Street can use a bore to avoid opening a long stretch of pavement.
  • River crossing: A Middle Sulphur River bore needs a depth plan for the channel and a check of Corps jurisdiction.
  • Rail crossing: A bore below the NTRW track needs the railroad’s agreement, including its conditions for depth, casing and flagging.
  • Creek and drainage work: A route near Willow Oak Creek can use entry and exit pits on the banks instead of cutting across them.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives Commerce pricing near a short line railroad (reporting mark NTRW)?

For a Commerce quote, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help us place the work against Park Street, Texas State Highway 24 or the Middle Sulphur River. The more clearly the route is shown, the better we can assess the crossings and access.

Crockett clay is a leading price factor because it can cling to the reamer and grip the pipe, calling for staged reaming and a planned pull. The number of utilities to expose also matters near the City of Commerce water system and electric lines. A crossing under Texas State Highway 24 or the NTRW track adds coordination and crossing requirements. Pavement, creek access, pit and excavator needs, and mobilization from Yukon also affect the job scope.

Questions people ask about boring in Commerce

Does Trinity Boring Solutions take directional boring jobs in Hunt County near Commerce?

Yes. We take directional boring work in Commerce and elsewhere in Texas, with our crews or vetted partner drilling contractors handling the site work. The Yukon main office coordinates the job, including a bore near Park Street, and you work with Trinity through the bore log whichever crew is on site.

Who approves our bore under Texas State Highway 24 in Commerce?

TxDOT reviews the utility permit for work in the right of way, through its Paris District for Commerce in Hunt County. The utility owner submits the application in RULIS, not the drilling contractor. We supply the bore plan and profile for a proposed crossing of Texas State Highway 24.

What does a bore under a short line railroad (reporting mark NTRW) in Commerce require?

It needs an agreement from the railroad that owns the track. That agreement sets conditions such as casing, depth and flagging for the crossing. The NTRW track runs 4.04 miles inside Commerce, so the proposed route needs to be checked against the track location.

Can a line be bored under the Middle Sulphur River in Commerce?

A bore can be planned beneath the Middle Sulphur River, which runs 1.08 channel miles inside Commerce. The route needs a depth plan that stays beneath the channel, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Who runs Commerce’s public water system, and does its water come from surface water?

The City of Commerce owns the public water system and uses surface water; we plan underground work with that context. Commerce’s system reports 6,927 service connections serving 9,266 people, figures we use to understand local utility scale. We identify and expose marked water lines near a proposed bore before the drill approaches them.

Which electric line owner should I confirm for a Commerce bore in Hunt County?

Confirm the owner for the specific address before planning an electric conduit bore. Utilities reporting service in Hunt County include Oncor Electric Delivery Company, Texas-New Mexico Power, City of Greenville, Fannin County Electric Cooperative, Farmers Electric Cooperative and Trinity Valley Electric Cooperative. We pothole marked lines before drilling near them.

Does Trinity cover Campbell and rural sites outside Commerce?

Yes. We take work across Texas, including Commerce area jobs near Campbell, which is 7.2 miles southwest of the city. Rural access and the route to the bore site help determine mobilization and the equipment plan.

How much notice does Texas811 need for a bore near Park Street in Commerce?

For a bore near Park Street, submit the locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days in advance. If our start slips more than 14 days past the original notice in Commerce, we submit a new request. Have worn or moved marks refreshed through Texas811 before work resumes.

What affects the cost of directional boring near Texas State Highway 24 in Commerce?

The main factors include Crockett clay, bore length and pipe size, utilities to expose, pavement, crossing conditions and pit or excavator needs. Work beneath Texas State Highway 24 or the NTRW track adds crossing coordination. Mobilization from the Yukon main office is also part of planning for Commerce.

Where the Commerce facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Commerce

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Commerce, Texas

Type the address of your job in Commerce. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Commerce

Same county: Caddo Mills · Royse City · West Tawakoni · Quinlan · Poetry · Celeste · Lone Oak · Hawk Cove · Union Valley. All counties: Texas county list.