trinityboringsolutions.com

Mount Enterprise Texas Directional Boring: Redsprings Soil, Gatlin Branch and US 259

Quick Answer: Mount Enterprise is a small incorporated city in Rusk County, so streets such as Railroad Street belong to the city. We install utilities with directional boring, also called horizontal directional drilling (HDD), including routes beneath Gatlin Branch. Mount Enterprise is 372 road miles from our Yukon, Oklahoma main office, and US 259 is one local route to consider for mobilization. Redsprings soil is common here, with clay loam below the surface that can cling to tooling and pipe.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Mount Enterprise bores at a glance

  • Incorporated city in Rusk County, Texas. Population 512 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 372 miles, about 7.3 hours of driving.
  • Ground: Redsprings soil is mapped on 50 percent of the area, with clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 65 percent of the area.
  • Highways inside the boundary: US 259, US 84, FM 3055 and Texas State Highway 315. State permit office: TxDOT Tyler District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Gatlin Branch, Wooten Creek, Dry Creek and Green Neal Branch.
  • Public water: Mt Enterprise Water Supply Corporation, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring near Railroad Street in Mount Enterprise?

Trinity Boring Solutions takes directional boring work in Mount Enterprise, an incorporated city in Rusk County where Railroad Street and other city streets can carry utility routes. As a small city, Mount Enterprise owns its public streets. For utility planning along Railroad Street, we use the Census Bureau Vintage 2024 estimate of 512 as Mount Enterprise’s population. Water, sewer, gas, electric conduit and fiber lines can run beneath local streets or connect properties along US 259.

Our main office is in Yukon, Oklahoma, and Mount Enterprise work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business started in 1965, with directional boring work dating to 1982; the range from 3/4 inch service lines to 48 inch casing suits utility routes along Railroad Street, with bore lengths from 10 feet to 5,000 feet.

Trinity Boring Solutions branded compact directional drilling unit positioned beside a tree on a red dirt jobsite
Our compact directional drill set up beside a tree on a tight site. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Redsprings soil mean for Mount Enterprise?

The USDA soil survey maps Redsprings across 50 percent of Mount Enterprise, including Redsprings gravelly fine sandy loam on 45 percent of the mapped area. At about 40 inches below the surface, clay loam is mapped under 68 percent of the area, and heavy clay under 64 percent. Sandy clay loam accounts for 16 percent and clay for 12 percent at that depth. Redsprings and Ulto are mapped soil patterns, not test borings, so we verify ground conditions before boring. Sticky clay can build on a reamer and grip pipe, so a bore near Gatlin Branch needs a fluid and reaming plan suited to the actual route.

USDA soil survey, inside the Mount Enterprise city limitsWhat is mapped
Soil series mappedRedsprings 50 percent, Ulto 15 percent, Attoyac 11 percent, Sawlit 7 percent and Laneville 7 percent
Texture at the surfacegravelly fine sandy loam 50 percent, fine sandy loam 30 percent and loam 15 percent
Texture about 40 inches downclay loam 68 percent, sandy clay loam 16 percent and clay 12 percent
Engineering class about 40 inches downfat clay (CH) 53 percent, lean clay (CL) 35 percent and clayey sand (SC) 12 percent
Average clay content about 40 inches down34 percent
Bedrock mapped within 60 inches65 percent of the area (0 percent hard rock, 65 percent weathered rock)
Seasonal water table within 60 inches19 percent of the area
Flood prone soils11 percent of the area
High corrosion risk for uncoated steel19 percent of the area

The USDA soil survey maps weathered bedrock within 60 inches across 65 percent of Mount Enterprise, with a typical depth of 47 inches; that material can slow the bit compared with soil. A seasonal water table is mapped within 60 inches on 19 percent of the area, and flood prone soils cover 11 percent, so pits and creek approaches need attention to wet ground. High steel corrosion risk is mapped on 19 percent. The Reklaw Formation, an Eocene unit of sandstone and clay, is mapped here; the line owner should consider casing and tracer wire materials for the route.

How do crews handle clay loam in Mount Enterprise?

For a Mount Enterprise bore through clay loam, we adjust the fluid and reaming plan to the ground rather than treating the USDA map as a site test. Redsprings soil and weathered bedrock both matter to the route.

  1. Where Redsprings clay loam is present, we use a fluid mix suited to sticky ground and ream in stages so the tooling does not carry excess clay.
  2. For a route through the mapped gravelly fine sandy loam, we keep the hole supported as it opens and have the pipe ready before the final ream.
  3. Near Gatlin Branch, we plan for the mapped seasonal water table and flood prone soils, using manageable pits and pumping if water enters them.
  4. If a bore meets the mapped weathered bedrock of the Reklaw Formation, we slow the advance as needed and check the drill head’s depth and pitch.
Trinity Boring Solutions crew in hard hats at the exit pit with rock tooling on a sandstone bore in Guthrie, OK
Our crew at the exit pit with rock tooling on a sandstone bore in Guthrie, Oklahoma.

Which roads, tracks or creeks affect a Mount Enterprise bore near Gatlin Branch?

A Mount Enterprise bore may cross US 259, US 84, FM 3055 or Texas State Highway 315, all mapped within the city. Railroad Street is the longest named street at 4.95 miles, followed by 3rd Street at 2.05 miles and Rusk Street at 1.29 miles. A route beneath one of these roads can avoid cutting pavement, but the road owner and right of way determine the permit path. US 259 also affects planning for utility routes that approach or follow its corridor.

CrossingTypeMapped extentWho has a say
US 259US highway4.9 roadway miles insideState highway office
US 84US highway1.4 roadway miles insideState highway office
FM 3055State highway0.4 roadway miles insideState highway office
Texas State Highway 315State highway0.3 roadway miles insideState highway office
Gatlin BranchStream1.64 channel miles insideChecked for Corps of Engineers jurisdiction
Wooten CreekStream0.78 channel miles insideChecked for Corps of Engineers jurisdiction
Dry CreekStream0.37 channel miles insideChecked for Corps of Engineers jurisdiction
Green Neal BranchStream0.17 channel miles insideChecked for Corps of Engineers jurisdiction
Byu LocoStream0.05 channel miles insideChecked for Corps of Engineers jurisdiction
Cemetery BranchStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Wallace BranchStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Talley BranchStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Mount Enterprise or within one mile outside its limits, and none of the mapped street and rail crossings is identified here. The streams are a more direct crossing issue: Gatlin Branch runs 1.64 channel miles in the city, Wooten Creek 0.78 and Dry Creek 0.37. Nine mapped street crossings of named streams make the channel and bank locations relevant to bore depth and setup. Along Gatlin Branch, we plan the boring route knowing no lakes or ponds are mapped within one mile.

Does TxDOT Tyler District approve a US 259 bore in Mount Enterprise?

US 259 is a state highway, so work in its right of way goes through the Texas Department of Transportation and the TxDOT Tyler District. The utility that owns the line submits the application in TxDOT’s online RULIS system; we prepare the bore plan and profile and work under the utility owner’s permit. Existing highway pavement is bored or tunneled beneath, and a crossing needs the applicable cover depth in the permit. Railroad Street and other city streets are city owned. A Gatlin Branch crossing is checked during planning for U.S. Army Corps of Engineers jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the utility lines in Mount Enterprise and Rusk County?

Mt Enterprise Water Supply Corporation is the public water system listed for Mount Enterprise; its groundwater wells serve 2,205 people through 735 service connections. For electric work, Oncor Electric Delivery Company, Southwestern Electric Power, Cherokee County Electric Cooperative Association, Deep East Texas Electric Cooperative, Rusk County Electric Cooperative and Upshur Rural Electric Cooperative report service in Rusk County. We confirm the line owner for the address before laying out a conduit bore near US 84, since countywide reporting does not identify the provider at every property.

Line ownerWhat it isSourceSize
Mt Enterprise Water Supply CorporationPublic water systemGroundwater wells735 connections, 2,205 people served
Oncor Electric Delivery Company, Southwestern Electric Power, Cherokee County Electric Cooperative Association, Deep East Texas Electric Cooperative, Rusk County Electric Cooperative and Upshur Rural Electric CooperativeElectric utilities reporting service in Rusk CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Mount Enterprise’s median housing year at 1961; 48 percent of homes were built before 1960, 46 percent from 1960 to 1999 and 6 percent in 2000 or later. That mix can mean replacing older buried lines as well as adding newer services along 3rd Street. Before drilling near any marked utility, we use hydrovac potholing to expose it; paint shows position, not depth. A marked line beneath Rusk Street is a local example of where that check matters.

Hydrovac truck and boring equipment staged beside an airport taxiway for utility daylighting in Oklahoma City
Our hydrovac truck and boring equipment beside an airport taxiway in Oklahoma City, set up to expose a utility crossing.

What is near Mount Enterprise, including Garrison?

Mount Enterprise is in Rusk County, at an elevation of 451 feet, and covers 1.48 square miles. For service planning along 3rd Street, we use ZIP code 75681, which serves Mount Enterprise. Cushing is 11.6 miles southwest, Garrison is 12.6 miles southeast and Appleby is 14.1 miles south. Henderson, the county seat and nearest larger city, is 18.2 miles north. The Yukon yard is 372 road miles away, a 7.3 hour drive, so mobilization is part of planning for work near US 259 or the Gatlin Branch crossings.

Places near Mount Enterprise

What kinds of bores come up near Railroad Street in Mount Enterprise?

  • Highway crossing: A utility route beneath US 259 uses a bore or tunnel under existing pavement, with the utility owner handling the right of way permit.
  • Water service: A connection near Mt Enterprise Water Supply Corporation lines needs a route that accounts for the groundwater system and existing services.
  • Fiber route: Conduit along Railroad Street can pass beneath the road surface, with marked utilities exposed before the drill approaches them.
  • Creek crossing: A bore at Gatlin Branch can pass beneath the channel and banks, with the crossing checked for federal jurisdiction during planning.
  • Street replacement: A sewer or water line near Rusk Street can be installed without cutting the street, subject to the route and city coordination.
  • Electric conduit: A route near US 84 starts with confirming the line owner, since several utilities report service across Rusk County.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Mount Enterprise bore near 1st Street?

Start with an address or map pin, because the exact position on 1st Street or near Gatlin Branch changes the route and crossing count. For a US 84 crossing, we need to know what goes underground, the pipe or conduit size, and the footage. A sketch or plans help us see pavement, access and marked utilities before we shape the bore plan.

The route and scope set the price. Mount Enterprise is 372 road miles from Yukon, so mobilization matters; Redsprings soil, clay loam or weathered bedrock can change drilling time. Crossings of US 259, Gatlin Branch or marked utilities affect planning and exposure work. Concrete or pavement, entry and exit pits, excavator time and sand backfill also affect the job. High profile or emergency work can add demands to the schedule.

Questions people ask about boring in Mount Enterprise

Does Trinity take directional boring work in Mount Enterprise and Rusk County?

Yes. We take directional boring work in Mount Enterprise and across Texas, with the Yukon main office coordinating the job. Our own crews and satellite yards run by vetted partner drilling contractors can staff the work. You deal with Trinity from the first call through the bore log, whether the crew is working near Railroad Street or elsewhere in Rusk County.

Can a line be bored beneath Gatlin Branch in Mount Enterprise?

A bore beneath Gatlin Branch can be planned, with the route and channel conditions checked first. The stream runs 1.64 channel miles inside Mount Enterprise, so the entry, exit and depth need to suit the crossing. When planning a crossing at Wooten Creek, we check whether the route falls under US Army Corps of Engineers jurisdiction.

Who runs Mount Enterprise’s water system near 1st Street, and where is its source?

Mt Enterprise Water Supply Corporation is the listed public water system, and its source is groundwater wells. With 2,205 people served through 735 service connections, we plan Mount Enterprise bores to avoid disrupting public water service. For a bore near a water line on 3rd Street, the existing route and the exact line location need to be confirmed before drilling.

Which electric company serves Mount Enterprise in Rusk County, and who confirms conduit specs?

Several utilities report electric service in Rusk County: Oncor Electric Delivery Company, Southwestern Electric Power, Cherokee County Electric Cooperative Association, Deep East Texas Electric Cooperative, Rusk County Electric Cooperative and Upshur Rural Electric Cooperative. We confirm the line owner for the specific Mount Enterprise address before planning conduit near US 259, then coordinate conduit specifications with that owner.

Does Mount Enterprise or Rusk County control Rusk Street, and must it be cut?

Rusk Street is a city street in incorporated Mount Enterprise, so it belongs to the city, not Rusk County. A directional bore can pass beneath its pavement without an open cut. The route still needs to account for other marked utilities and any city street requirements that apply to the work.

How old are buried lines near 3rd Street in Mount Enterprise, and what does that mean for replacement bores?

The American Community Survey 2019 to 2023 estimates give Mount Enterprise a median housing year of 1961, with 48 percent of homes built before 1960. Older streets such as 3rd Street may have existing utilities to locate before a replacement route is set. We expose marked lines before drilling near them, because surface paint does not show depth.

Does Trinity cover Cushing and rural sites outside Mount Enterprise?

Yes. We take work around Mount Enterprise, including nearby Cushing, which is 11.6 miles southwest, and rural sites outside the city limits. Routes near Garrison, 12.6 miles southeast, can also be discussed. The address or map pin helps us assess access, distance from Yukon and the planned line.

How much 811 notice does a Mount Enterprise bore near Railroad Street need?

Paint near Railroad Street marks a line’s position, not its depth. Texas law requires a Texas811 locate request at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. If the start slips more than 14 days past the original notice, make a new request; marks that wear off or move must be refreshed through Texas811 before work continues.

What affects the cost of a directional bore near US 259 in Mount Enterprise?

The job details determine the price, not one single measure. For a Mount Enterprise route, the 372 road miles from Yukon affect mobilization, while Redsprings clay or weathered bedrock can affect drilling time. US 259 or Gatlin Branch crossings, marked utilities, pavement, pits, excavator time, sand backfill and emergency scheduling can also change the scope.

Where the Mount Enterprise facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Mount Enterprise

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Mount Enterprise, Texas

Type the address of your job in Mount Enterprise. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Mount Enterprise

Same county: Kilgore · Lake Cherokee · Overton · Tatum · New London · Reklaw · Easton. All counties: Texas county list.