Tatum Texas Directional Boring: Eastwood Soil, BNSF Railway and Tatum Creek
Quick Answer: Directional boring, also called horizontal directional drilling (HDD), can carry new lines beneath Tatum Creek or the BNSF Railway without opening those crossings. From our Yukon, Oklahoma main office, Tatum is 358 road miles away, so the BNSF Railway route and work scope shape crew planning. The USDA soil survey maps sandy clay loam at 40 inches across 44 percent of the area. That clay can cling to tooling, so staged reaming and a same day pull help keep the bore moving.
Tatum bores at a glance
- Incorporated city in Rusk County and Panola County, Texas. Population 1,400 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 358 miles, about 7 hours of driving.
- Ground: Eastwood soil is mapped on 26 percent of the area, with sandy clay loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 15 percent of the area.
- Highways inside the boundary: Texas State Highway 43, Texas State Highway 149, FM 1797 and FM 3231. State permit office: TxDOT Tyler District.
- Railroad track inside the boundary: BNSF Railway, with 3 mapped street and rail crossings.
- Named streams inside the boundary: Tatum Creek.
- Public water: City of Tatum, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring near BNSF Railway in Tatum?
Tatum is 358 road miles from our Yukon yard, and our own crews and vetted partner contractor yards staff directional boring routes near the BNSF Railway. The city spans Rusk and Panola counties, and the Census Bureau Vintage 2024 estimate puts its population at 1,400. We install water, sewer, gas, electric conduit and fiber where service routes follow streets such as Hill Street or Johnson Street.
Our main office is in Yukon, Oklahoma, and Tatum work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. With City of Tatum water lines and electric routes reported across Rusk County already underground, our record of no utility strike in over 25 years reflects the care we bring; our family business began in 1965 and has bored directionally since 1982.

What does the Eastwood soil survey show about Tatum ground?
The USDA soil survey maps Eastwood as Tatum’s largest soil series, covering 26 percent of the city, with Eastwood very fine sandy loam on 5 to 20 percent slopes. At about 40 inches below the surface, sandy clay loam is mapped under 44 percent of the area, clay loam under 30 percent, and clay under 19 percent. The mapped average clay content at that depth is 33 percent. These are soil patterns, not test borings; the clay can cling to a reamer and grip pipe, so the plan may call for thinner fluid and staged reaming.
| USDA soil survey, inside the Tatum city limits | What is mapped |
|---|---|
| Soil series mapped | Eastwood 26 percent, Lilbert 19 percent, Bowie 15 percent, Scottsville 11 percent and Kirvin 8 percent |
| Texture at the surface | very fine sandy loam 37 percent, loamy fine sand 25 percent and fine sandy loam 21 percent |
| Texture about 40 inches down | sandy clay loam 44 percent, clay loam 30 percent and clay 19 percent |
| Engineering class about 40 inches down | lean clay (CL) 58 percent, clayey sand (SC) 22 percent and fat clay (CH) 15 percent |
| Average clay content about 40 inches down | 33 percent |
| Bedrock mapped within 60 inches | 15 percent of the area (0 percent hard rock, 15 percent weathered rock) |
| Seasonal water table within 60 inches | 36 percent of the area |
| Flood prone soils | 9 percent of the area |
| High corrosion risk for uncoated steel | 40 percent of the area |
The USDA soil survey maps bedrock within 60 inches across 15 percent of Tatum, all described as weathered; 4 percent has bedrock within 40 inches, and hard bedrock is not mapped within 60 inches. A seasonal water table is mapped within 60 inches across 36 percent, while flood prone soils cover 9 percent. High steel corrosion risk is mapped across 40 percent, so casing and tracer wire material need attention from the line owner. The geologic map includes the Cenozoic clayey, fine to medium sand and fine sandy clay decomposition residuum and the Paleogene Wilcox Group, undivided, which is mostly mudstone.
How is a bore run through Tatum’s sandy clay loam?
Tatum’s sandy clay loam at about 40 inches can become sticky around the reamer, while the mapped seasonal water table can affect pits. We adjust fluid and reaming steps to the route and soil conditions.
- In Eastwood soil, we choose fluid and reamer stages to limit sticky clay buildup, then have the pipe ready so it can be pulled soon after the hole is opened.
- Where Tatum’s mapped seasonal water table affects a bore pit, we keep pits compact and pump out water; wet sandy layers need careful control.
- Near Texas State Highway 43 pavement, we steer the bore beneath the road instead of cutting the surface, while tracking the drill head and logging depth and pitch.
- For a Tatum Creek route, we plan the bore beneath the channel and check for Corps jurisdiction; the street and creek banks remain uncut.

What does a bore have to cross on Hill Street in Tatum?
Tatum’s mapped highways include Texas State Highway 43, with 2.4 roadway miles in the city, and Texas State Highway 149, with 2.3. FM 1797 and FM 3231 also run inside the limits. A route along Hill Street, the longest named street at 2.32 miles, may need to pass beneath local pavement rather than cut across it. Johnson Street runs 2.19 miles, while Sterling Price Street and Crystal Farms Road each have 1.35 miles mapped in the city, giving route planners several named street corridors to check.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Texas State Highway 43 | State highway | 2.4 roadway miles inside | State highway office |
| Texas State Highway 149 | State highway | 2.3 roadway miles inside | State highway office |
| FM 1797 | State highway | 1 roadway miles inside | State highway office |
| FM 3231 | State highway | 0.9 roadway miles inside | State highway office |
| BNSF Railway | Railroad | 1.69 track miles inside | The railroad |
| private or unidentified track | Railroad nearby | 0.1 miles outside | The railroad |
| Tatum Creek | Stream | 2.08 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Martin Creek | Stream nearby | 0.1 miles outside | Checked for Corps of Engineers jurisdiction |
| Caney Branch | Stream nearby | 0.4 miles outside | Checked for Corps of Engineers jurisdiction |
| Taylor Branch | Stream nearby | 0.5 miles outside | Checked for Corps of Engineers jurisdiction |
The BNSF Railway has 1.69 track miles inside Tatum, and public mapping shows three street and rail crossings in the city. A bore beneath its Longview Subdivision needs an agreement with the railroad that sets crossing conditions. Tatum Creek runs 2.08 channel miles through the city, with three mapped street crossings of named streams. Creek work needs a route planned beneath the channel, and its jurisdiction is checked during planning. With no lakes or ponds mapped within one mile of Tatum, we can assess the underground route using that local map detail.
Who has to sign off on Tatum bores under Texas State Highway 43?
For work in the Texas State Highway 43 right of way, the line owner files the utility permit through TxDOT’s online RULIS system; Trinity prepares the bore plan and profile for that application. TxDOT’s Tyler District reviews it. Electric and communication lines crossing the highway need 60 inches of cover below the lowest point of the crossed grade, and 48 inches when running along the right of way; water lines need 60 inches at crossings and 36 inches along it. Pressurized sewer crossings need 60 inches, subject to a different depth set in the permit. Tatum city streets belong to the city, while a BNSF Railway crossing needs an agreement with the railroad. Tatum Creek is checked for Corps jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines are already buried near the City of Tatum system?
The City of Tatum public water system uses groundwater wells and has 634 service connections serving 1,902 people. Before planning a bore near its water lines, we hydrovac pothole marked utilities on the route. Oncor Electric Delivery Company, Southwestern Electric Power, Cherokee County Electric Cooperative Association, Deep East Texas Electric Cooperative, Rusk County Electric Cooperative and Upshur Rural Electric Cooperative report electric service in Rusk County; the line owner for a specific Tatum conduit route is confirmed before work.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Tatum | Public water system | Groundwater wells | 634 connections, 1,902 people served |
| Oncor Electric Delivery Company, Southwestern Electric Power, Cherokee County Electric Cooperative Association, Deep East Texas Electric Cooperative, Rusk County Electric Cooperative and Upshur Rural Electric Cooperative | Electric utilities reporting service in Rusk County and Panola County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Tatum’s median housing year at 1994; 10 percent of homes were built before 1960, 45 percent from 1960 to 1999, and 45 percent in 2000 or later. That mix can mean a route near Hill Street serves either a replacement line or a newer connection. Before drilling near City of Tatum water lines or an electric conduit route, we expose marked utilities by hydrovac so paint is not mistaken for depth.

Do you cover Tatum and nearby Beckville?
We take directional boring work in Tatum and the surrounding area, including Beckville, 6.2 miles southeast, and Easton, 6.2 miles northwest. Tatum lies in Rusk and Panola counties, covers 3.78 square miles, and sits at an elevation of 322 feet. For underground work in Tatum, we use ZIP code 75691 to identify the service area location. Carthage, the nearest larger city, is 15.5 miles southeast; Henderson, the Rusk County seat, is 19.6 miles southwest. Our Yukon yard is 358 road miles away, a 7.0 hour drive, so the route and equipment needs inform crew planning.
Places near Tatum
- Directional boring in Beckville: 6.2 miles southeast
- Directional boring in Easton: 6.2 miles northwest
- Directional boring in Lake Cherokee: 8.3 miles west
- Directional boring in Lakeport: 12.8 miles northwest
- Directional boring in Hallsville: 13 miles north
- Directional boring in Carthage: 15.5 miles southeast
What kinds of bores come up around Johnson Street in Tatum?
- Highway crossing: A bore under Texas State Highway 43 can carry a water or communication line beneath the pavement and travel lanes.
- Water service: A new service near the City of Tatum system needs a route checked against existing groundwater well lines and marked utilities.
- Fiber route: Fiber conduit along Johnson Street can be bored beneath pavement and driveways rather than opened with a trench.
- Creek crossing: A route beneath Tatum Creek needs depth planned under the channel and a jurisdiction check during planning.
- Rail crossing: A line beneath the BNSF Railway Longview Subdivision requires the railroad’s crossing agreement before the route is set.
- Street connection: A service near Crystal Farms Road can be planned around access, pavement and the utilities marked along the route.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a Tatum Creek bore?
For a bore near Tatum Creek, send the address or map pin first so we can see the exact route and nearby crossings. For a Tatum bore, we need the pipe or conduit size and footage to define what will go underground before planning the route. A sketch or plans help us check the creek, Hill Street, or any other crossing along the proposed line.
A straightforward route on Crystal Farms Road with clear access and few marked utilities is simpler to plan than a bore under Texas State Highway 43 or the BNSF Railway. Length, pipe size, soil and rock, exposed utility crossings, pavement, creek crossings, pits, excavator time and sand backfill all affect the work. Tatum’s clay at depth may change reaming, and mobilization reflects the 358 road miles from Yukon. High profile or emergency work also changes the crew plan.
Questions people ask about boring in Tatum
Does Trinity Boring Solutions take directional boring work in Tatum and Rusk County?
Yes. We take directional boring work in Tatum, including routes in Rusk County, and staff it with our own crews and vetted partner drilling contractors. Customers work with Trinity from the first call through the bore log, whether our crew or a partner crew is on site near Hill Street.
Is there rock near Tatum, and how much is mapped within five feet?
The USDA soil survey maps bedrock within 60 inches across 15 percent of Tatum, and it is weathered bedrock; 4 percent has bedrock within 40 inches. Hard bedrock is not mapped within 60 inches. The mapped conditions can still require a slower bore where weathered rock is encountered.
Who approves a Tatum bore under Texas State Highway 43?
The line owner applies for the utility permit through TxDOT’s online RULIS system, and TxDOT’s Tyler District reviews the Texas State Highway 43 work. Trinity prepares the bore plan and profile for the owner’s application. The permit sets the required cover for the line and crossing.
What does a Tatum bore under BNSF Railway require?
A crossing under the BNSF Railway track in Tatum needs an agreement from the railroad that owns it. The agreement sets crossing conditions such as casing, depth and flagging. The railroad has 1.69 track miles inside the city, so the exact route matters.
Can a line be bored beneath Tatum Creek in Tatum?
A line can be planned beneath Tatum Creek, which has 2.08 channel miles inside the city. We plan the bore to pass below the channel and check for U.S. Army Corps of Engineers jurisdiction during planning. The crossing route and ground conditions determine the bore plan.
Who runs Tatum’s public water system, and does its water come from groundwater wells?
Because the City of Tatum owns the public water system and groundwater wells supply it, we plan utility work with that source in mind. Public records list 634 service connections serving 1,902 people. Before a bore near those water lines, we hydrovac marked utilities along the route so the drill plan accounts for their actual depth.
What bore sizes and lengths can you handle near Crystal Farms Road in Tatum?
Near Crystal Farms Road in Tatum, we handle lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. The right equipment and method depend on the line size, length and mapped soil conditions along the route.
How much notice does Texas811 need for a bore on Hill Street in Tatum?
For a Hill Street bore, Texas811 needs a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If the start slips more than 14 days past the notice, make a new request. In Tatum, we refresh worn or moved marks before continuing work along the marked underground route.
What affects the cost of directional boring near Texas State Highway 43 in Tatum?
The route, length, pipe or conduit size, soil, exposed utilities, pavement, creek crossings and pit work affect a Tatum bore’s price. Texas State Highway 43 or BNSF Railway crossings can add planning requirements, while the clay mapped below the surface affects drilling steps. Mobilization from Yukon also matters.
Where the Tatum facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Tatum
- U.S. Census Bureau, TIGER/Line 2024: Tatum boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Tatum
- U.S. Census Bureau, American Community Survey 2019 to 2023: Tatum housing units and year built
- Macrostrat geologic map compilation: map units under Tatum
- U.S. EPA Safe Drinking Water Information System: public water systems serving Tatum
- U.S. Department of Transportation, North American Rail Network: track owners in Rusk County and Panola County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Rusk County and Panola County
- U.S. Geological Survey, Elevation Point Query Service: Tatum elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Tatum
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Tatum
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Tatum, Texas
Type the address of your job in Tatum. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Tatum
County: Panola County directional boring. Same county: Gary City · Henderson · Kilgore · Overton · New London · Mount Enterprise · Reklaw. All counties: Texas county list.
