Van Alstyne Texas Directional Boring: Fairlie Clay, US 75 and Hurricane Creek
Quick Answer: Van Alstyne is an incorporated city, so its streets belong to the city; we take directional boring, also called horizontal directional drilling (HDD), work near Hurricane Creek. The Yukon, Oklahoma main office is 197 road miles away, a factor to consider for work along US 75. Fairlie and Houston Black clays are common here, and sticky clay can grip the pipe during a pull. The Census Bureau Vintage 2024 estimate puts Van Alstyne at 7,220 people.
Van Alstyne bores at a glance
- Incorporated city in Grayson County, Texas. Population 7,220 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 197 miles, about 4 hours of driving.
- Ground: Fairlie soil is mapped on 62 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 93 percent of the area.
- Highways inside the boundary: US 75, Texas State Highway 5, FM 121 and FM 3133. State permit office: TxDOT Paris District.
- Railroad track inside the boundary: Dallas, Garland and Northeastern Railroad, with 8 mapped street and rail crossings.
- Named streams inside the boundary: Hurricane Creek and East Prong Whites Creek.
- Public water: City of Van Alstyne, surface water bought from another system.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring near Hurricane Creek in Van Alstyne?
Van Alstyne is an incorporated city in Grayson County, so its public streets belong to the city. The Census Bureau Vintage 2024 estimate is 7,220, so we account for Van Alstyne’s community scale when planning underground work. We install water, sewer, gas, electric conduit and fiber lines, including service runs from Waco Street or Main Street to a building or property connection.
Our main office is in Yukon, Oklahoma, and Van Alstyne work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore is roughly 4,100 feet with 48 inch pipe under the Arkansas River in Tulsa, Oklahoma. A typical Van Alstyne job is shorter, such as a service bore near Hurricane Creek or US 75.

What is Fairlie soil like to bore in Van Alstyne?
The USDA soil survey maps Fairlie soil across 62 percent of Van Alstyne. A Fairlie and Houston Black clays map unit covers 44 percent of the city, and clay makes up 64 percent of the mapped texture at about 40 inches below the surface. The survey reports an average clay content of 45 percent at that depth. This is not a sandy profile. Sticky clay can ball on a reamer and swell against pipe, so the bore plan needs to account for the soil on the route, including around Main Street.
| USDA soil survey, inside the Van Alstyne city limits | What is mapped |
|---|---|
| Soil series mapped | Fairlie 62 percent, Austin 24 percent, Whitewright 4 percent, Lewisville 3 percent and Howe 3 percent |
| Texture at the surface | clay 64 percent, silty clay 27 percent and silty clay loam 7 percent |
| Texture about 40 inches down | clay 64 percent, bedrock 31 percent and silty clay 3 percent |
| Engineering class about 40 inches down | fat clay (CH) 67 percent |
| Average clay content about 40 inches down | 45 percent |
| Bedrock mapped within 60 inches | 93 percent of the area (0 percent hard rock, 93 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 1 percent of the area |
| High corrosion risk for uncoated steel | 100 percent of the area |
The USDA soil survey maps bedrock within 60 inches across 93 percent of Van Alstyne, with a typical depth of 40 inches; it is weathered bedrock, not a claim that every bore meets solid rock. Austin Chalk, a Late Cretaceous geologic unit, is mapped in the area, so chalk may slow drilling. No seasonal water table is mapped within 60 inches, while flood prone soils cover 1 percent. High steel corrosion risk is mapped across 100 percent of the city, so the line owner should address casing and tracer wire materials.
How do we plan directional boring through Van Alstyne clay?
Fairlie and Houston Black clays make fluid control and timing matter on a Van Alstyne bore. We plan the entry and exit pits around the route, then track the drill head and log depth and pitch as it advances near streets such as Jefferson Street.
- In Fairlie clay, we use a fluid mix suited to sticky ground and open the hole in stages, reducing the chance that clay balls on the reamer.
- Because heavy clay is mapped under Van Alstyne, we watch fluid returns near pavement such as Waco Street so pressure does not lift the surface.
- Before drilling near marked lines on Jefferson Street, we use hydrovac potholing to expose each utility; paint alone does not show its depth.
- At Hurricane Creek, we plan the bore below the channel, track the drill head from the surface and record depth and pitch as the crossing advances.

What is in the way of a new line in Van Alstyne near US 75?
US 75 has 10.1 mapped roadway miles inside Van Alstyne, while Texas State Highway 5 has 7.1, FM 121 has 5.0 and FM 3133 has 2.0. A line crossing one of those routes needs a plan for the highway right of way, not just the private approach. Waco Street is the city’s longest named street at 2.62 miles, followed by Main Street at 1.76 miles and Jefferson Street at 1.35 miles. Those street crossings can be bored rather than opened across the pavement.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 75 | US highway | 10.1 roadway miles inside | State highway office |
| Texas State Highway 5 | State highway | 7.1 roadway miles inside | State highway office |
| FM 121 | State highway | 5 roadway miles inside | State highway office |
| FM 3133 | State highway | 2 roadway miles inside | State highway office |
| Dallas, Garland and Northeastern Railroad | Railroad | 1.67 track miles inside | The railroad |
| Hurricane Creek | Stream | 2.26 channel miles inside | Checked for Corps of Engineers jurisdiction |
| East Prong Whites Creek | Stream | 0.57 channel miles inside | Checked for Corps of Engineers jurisdiction |
| West Prong Sister Grove Creek | Stream nearby | 0.2 miles outside | Checked for Corps of Engineers jurisdiction |
| Sweetwater Creek | Stream nearby | 0.4 miles outside | Checked for Corps of Engineers jurisdiction |
| West Prong Whites Creek | Stream nearby | 0.7 miles outside | Checked for Corps of Engineers jurisdiction |
| Sister Grove Creek | Stream nearby | 0.9 miles outside | Checked for Corps of Engineers jurisdiction |
The Dallas, Garland and Northeastern Railroad has 1.67 track miles in Van Alstyne, and public mapping shows 8 street and rail crossings in the city. Hurricane Creek runs 2.26 channel miles here, and East Prong Whites Creek runs 0.57 miles. Public mapping shows 10 street crossings of named streams. A creek or track crossing needs its own route and depth review, rather than being treated like an ordinary service bore.
Who approves a Van Alstyne bore under US 75 or the Dallas, Garland and Northeastern Railroad?
US 75, Texas State Highway 5, FM 121 and FM 3133 are state routes, so work in their right of way needs a TxDOT utility permit reviewed by the TxDOT Paris District. The utility owner files through TxDOT’s RULIS system; we supply the bore plan and profile and work under the permit issued to that owner. A crossing of the Dallas, Garland and Northeastern Railroad needs an agreement from the railroad, including its casing, depth and flagging terms. For Hurricane Creek, we check during planning whether the crossing is within U.S. Army Corps of Engineers jurisdiction.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines are already buried in Van Alstyne and Grayson County?
The City of Van Alstyne public water system serves 10,644 people through 3,548 connections and uses purchased surface water. Before a bore near Waco Street or a water service connection, we pothole marked utilities with hydrovac to confirm their depth. Electric service reporting in Grayson County includes Oncor Electric Delivery Company, Texas New Mexico Power, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Fannin County Electric Cooperative and Grayson Collin Electric Cooperative. Confirm the line owner before choosing conduit specifications.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Van Alstyne | Public water system | Surface water bought from another system | 3,548 connections, 10,644 people served |
| Oncor Electric Delivery Company, Texas-New Mexico Power, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Fannin County Electric Cooperative and Grayson-Collin Electric Cooperative | Electric utilities reporting service in Grayson County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 estimates put the median year built for Van Alstyne housing at 2005; 17 percent of units were built before 1960, and 56 percent in 2000 or later. That mix can mean both replacement routes and newer service connections around Main Street. We expose marked utilities along the bore path with hydrovac before the drill approaches, since paint near Jefferson Street shows a line’s position, not its depth.

Where is Van Alstyne in relation to Anna and our Yukon office?
Van Alstyne is in Grayson County, which contains 98 percent of the incorporated city, and the city covers 5.55 square miles at an elevation of 780 feet. Its ZIP code is 75495. Anna, the nearest larger city, is 5.4 miles south; Howe is 6.2 miles north. Sherman, the Grayson County seat, is 14.5 miles north. From our Yukon, Oklahoma main office, the road distance is 197 miles and the drive is 4.0 hours, so mobilization is part of planning for a Van Alstyne job.
Places near Van Alstyne
- Directional boring in Anna: 5.4 miles south
- Directional boring in Howe: 6.2 miles north
- Weston: 7.9 miles southwest
- Westminster: 8.2 miles southeast
- Directional boring in Tom Bean: 8.9 miles northeast
What would we bore near Main Street in Van Alstyne?
- Highway crossing: A bore beneath US 75 needs a route plan for the state right of way and all travel lanes.
- Water service: A connection near the City of Van Alstyne water system needs potholes where the route meets existing lines.
- Fiber drop: A fiber conduit along Main Street can pass under pavement without cutting the street surface.
- Creek crossing: A bore below Hurricane Creek needs channel depth planning and a jurisdiction check during planning.
- Rail crossing: A route beneath the Dallas, Garland and Northeastern Railroad needs the railroad’s crossing agreement and its casing terms.
- Street service: A line crossing Waco Street can be installed by boring, with entry and exit pits placed off the pavement.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for a Van Alstyne quote near Waco Street?
Start with where the work is, such as an address or map pin near Waco Street. Tell us what goes in the ground, such as a water line for the City of Van Alstyne system, then give the pipe or conduit size and the footage. A sketch or plans showing the route toward US 75 or Hurricane Creek help us see the crossings and pit locations.
The main price drivers are route length and pipe or conduit size, followed by the ground and crossings. Fairlie clay can call for staged reaming, while a route under US 75 or the Dallas, Garland and Northeastern Railroad adds crossing requirements. We also account for utilities to expose, pavement, Hurricane Creek or drainage crossings, pits, excavator time and sand backfill. High profile or emergency work and the 197 road miles from Yukon can affect mobilization.
Questions people ask about boring in Van Alstyne
Does Trinity Boring Solutions take directional boring jobs in Van Alstyne and Grayson County?
Yes. We take directional boring work in Van Alstyne, with our own crews and vetted partner contractor yards supporting the work. Our main office is in Yukon, Oklahoma, and you deal with Trinity from the first call through the bore log. For a route near US 75, we plan around the highway crossing and the local ground.
What does a Van Alstyne bore under the Dallas, Garland and Northeastern Railroad need?
A crossing needs an agreement with the Dallas, Garland and Northeastern Railroad, which has 1.67 track miles in Van Alstyne. The railroad sets the crossing terms for casing, depth and flagging. If the line also occupies highway right of way near US 75, TxDOT asks for a copy of the railroad agreement.
Can a line be bored under Hurricane Creek in Van Alstyne?
A line can be planned beneath Hurricane Creek, which runs 2.26 channel miles inside Van Alstyne. The route needs to stay below the channel, and we check during planning whether the crossing is within U.S. Army Corps of Engineers jurisdiction. Entry and exit pits can be placed on the creek banks without cutting across them.
Does the City of Van Alstyne own its public water system and use purchased surface water?
Purchased surface water supplies the public water system owned by the City of Van Alstyne, which we account for in underground planning. The system serves 10,644 people through 3,548 connections. For a bore near a water connection on Waco Street, we expose marked lines before drilling close to them.
Which electric company serves my Van Alstyne address in Grayson County, and who confirms conduit specs?
The line owner depends on the address. Utilities reporting service in Grayson County include Oncor Electric Delivery Company, Texas New Mexico Power and several electric cooperatives. Confirm the owner of the line before setting conduit specifications for a bore near Main Street; we do not assume one provider serves every Van Alstyne address.
Who controls Jefferson Street in Van Alstyne, and does a bore require cutting it?
Van Alstyne is incorporated, so Jefferson Street is a city street. A directional bore can pass beneath the pavement with pits on either side, avoiding an open cut across the street. We still need to plan the route around marked utilities and expose them before the drill approaches.
How much notice does Texas811 need for a Van Alstyne bore near Waco Street, and what if marks fade?
For a bore near Waco Street, Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If the start slips more than 14 days past the notice, make a new request. Before we continue boring, we have worn or moved marks refreshed through Texas811 to keep the marked work area current.
How far is Van Alstyne from the Yukon office, and does the distance from Anna change the job?
Our Yukon, Oklahoma main office is 197 road miles away, a 4.0 hour drive that we include in Van Alstyne project planning. Anna is 5.4 miles south of Van Alstyne, but the Yukon distance is what can affect mobilization. We include that travel in planning a bore near US 75 or another local crossing.
What affects directional boring costs in Van Alstyne near US 75?
The route length, pipe or conduit size, Fairlie clay and crossing conditions are primary factors. A bore under US 75 or the Dallas, Garland and Northeastern Railroad involves crossing planning, while utilities, pavement, creek or drainage crossings, pits and excavator time also affect the job. We include mobilization from Yukon in our planning for Van Alstyne boring work because travel is part of the job.
Where the Van Alstyne facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Van Alstyne
- U.S. Census Bureau, TIGER/Line 2024: Van Alstyne boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Van Alstyne
- U.S. Census Bureau, American Community Survey 2019 to 2023: Van Alstyne housing units and year built
- Macrostrat geologic map compilation: map units under Van Alstyne
- U.S. EPA Safe Drinking Water Information System: public water systems serving Van Alstyne
- U.S. Department of Transportation, North American Rail Network: track owners in Grayson County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Grayson County
- U.S. Geological Survey, Elevation Point Query Service: Van Alstyne elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Van Alstyne
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Van Alstyne
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Van Alstyne, Texas
Type the address of your job in Van Alstyne. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Van Alstyne
Same county: Sherman · Denison · Whitesboro · Pottsboro · Gunter · Preston · Collinsville · Whitewright · Bells · Tioga · Sherwood Shores · Southmayd. All counties: Texas county list.
