trinityboringsolutions.com

Blooming Grove Texas Directional Boring: Crockett Clay, FM 55 And Rush Creek

Quick Answer: At Blooming Grove, the top five feet shift from mostly fine sandy loam at the surface to clay at about 40 inches, so the lower ground can grip a reamer. Trinity Boring Solutions takes directional boring work in Texas, including horizontal directional drilling (HDD) near Rush Creek and FM 55. The Yukon, Oklahoma main office is 276 road miles from Kerr Street, a distance that affects mobilization. The Crockett clay calls for staged reaming and attention to drilling fluid.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Blooming Grove bores at a glance

  • Incorporated city in Navarro County, Texas. Population 890 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 276 miles, about 5.6 hours of driving.
  • Ground: Crockett soil is mapped on 99 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 99 percent of the area.
  • Highways inside the boundary: FM 55 and Texas State Highway 22. State permit office: TxDOT Dallas District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Rush Creek.
  • Public water: City of Blooming Grove, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Does anyone do directional boring near Rush Creek in Blooming Grove?

Trinity Boring Solutions takes directional boring work in Blooming Grove, including routes along Kerr Street and near Rush Creek. What does the top five feet look like? The USDA soil survey maps mostly fine sandy loam near the surface, with clay at about 40 inches. The Census Bureau Vintage 2024 estimate puts the town population at 890 in Navarro County. We install water, sewer, gas, electric conduit and fiber along local streets and routes such as FM 55.

Our main office is in Yukon, Oklahoma, and Blooming Grove work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Since 1982, four decades of directional boring have taught us to plan for the sticky Crockett clay mapped below Blooming Grove’s fine sandy loam. Our family business began in 1965, and the crew on site works from the same plan we prepare.

Trinity Boring Solutions directional boring crew, drill rig and hydrovac trailer staged along an airport service road at Will Rogers World Airport in Oklahoma City
Our boring crew, drill and hydrovac trailer staged along a service road at Will Rogers World Airport in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

How does Crockett soil affect drilling in Blooming Grove?

Crockett soil covers 99 percent of mapped land in Blooming Grove, according to the USDA soil survey. Near the surface, fine sandy loam is mapped across 92 percent of the town; at about 40 inches, clay is mapped across 99 percent, with average clay content of 44 percent. We treat Crockett soil maps as planning context, not test borings, before choosing a bore path in Blooming Grove. For a bore near Kerr Street, the shift to heavy clay matters: it can stick to the reamer and grip pipe, so we plan staged reaming and a timely pull.

USDA soil survey, inside the Blooming Grove city limitsWhat is mapped
Soil series mappedCrockett 99 percent
Texture at the surfacefine sandy loam 92 percent and loam 7 percent
Texture about 40 inches downclay 99 percent
Engineering class about 40 inches downfat clay (CH) 99 percent
Average clay content about 40 inches down44 percent
Bedrock mapped within 60 inches99 percent of the area (0 percent hard rock, 99 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils1 percent of the area
High corrosion risk for uncoated steel99 percent of the area

Weathered bedrock is mapped within 60 inches across 99 percent of Blooming Grove, with typical depth at 53 inches; that can slow drilling near the lower part of the bore. The USDA soil survey maps no seasonal water table within 60 inches and flood prone soils across 1 percent of the town, including the area to consider near Rush Creek. High steel corrosion risk is mapped across 99 percent, so the line owner should weigh casing and tracer wire materials. The Wolfe City Formation, of Phanerozoic age, includes sandstone, mudstone and claystone that may affect drilling conditions.

How do we drill through clay in Blooming Grove?

For Blooming Grove’s Crockett clay, we use controlled fluid and staged reaming to manage sticky cuttings and reduce the chance of the ground gripping the pipe. Along Kerr Street, the exact plan follows the route and exposed utilities.

  1. We use a thinner drilling fluid with polymer in Blooming Grove’s heavy clay, then ream in stages so sticky cuttings do not build up on the tool.
  2. Near FM 55 pavement, we watch fluid returns and pressure closely because the mapped heavy clay can hold drilling pressure beneath the surface.
  3. We expose each marked utility along streets such as Kerr Street with hydrovac potholing before the drill approaches; locate paint does not show depth.
  4. As the drill advances through the Crockett soil, a walkover locator tracks the head from the surface while we record depth and pitch.
Trinity Boring Solutions crew in hard hats at the exit pit with rock tooling on a sandstone bore in Guthrie, OK
Our crew at the exit pit with rock tooling on a sandstone bore in Guthrie, Oklahoma.

What does a bore have to cross near Kerr Street in Blooming Grove?

FM 55 and Texas State Highway 22 run through Blooming Grove, so routes may need to pass beneath state highway pavement rather than cut across it. Kerr Street is the longest named street in town at 1.48 miles, followed by Fordyce Street at 1.01 miles and Forgey Street at 1.0 mile. Those road lengths give a sense of the street network, but a specific crossing plan depends on the address and the line path.

CrossingTypeMapped extentWho has a say
FM 55State highway2.1 roadway miles insideState highway office
Texas State Highway 22State highway1 roadway miles insideState highway office
Rush CreekStream0.43 channel miles insideChecked for Corps of Engineers jurisdiction
Cryer CreekStream nearby0.8 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Blooming Grove or within one mile, and no street and rail crossings are mapped in town. Rush Creek runs for 0.43 channel miles inside the limits, but no street crossing of a named stream is mapped. We distinguish Rush Creek from lakes or ponds; none are mapped within one mile of Blooming Grove. A proposed bore near Rush Creek still needs a route planned for the channel and a check for federal waterway jurisdiction.

Who has to sign off on FM 55 work in Blooming Grove?

FM 55 and Texas State Highway 22 are state highways in Blooming Grove, so work in their right of way needs a TxDOT utility permit. For Texas State Highway 22 crossings, we account for TxDOT Dallas District review before scheduling boring in Blooming Grove. The utility that owns the line submits the application through TxDOT’s online RULIS system; we prepare the bore plan and profile and work under that owner’s permit. TxDOT requires boring or tunneling beneath existing highway pavement, with highway cover requirements set by line type and crossing conditions. Because Blooming Grove is incorporated, we treat Kerr Street as a city street when planning and coordinating underground work. No railroad is mapped within one mile; a Rush Creek crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the lines in Blooming Grove and Navarro County?

The City of Blooming Grove owns the public water system, which uses purchased surface water and serves 857 people through 444 service connections. For electric service, Oncor Electric Delivery Company and Navarro County Electric Cooperative report service in Navarro County. Neither listing identifies the provider at every Blooming Grove address, so we confirm the line owner before planning an electric conduit bore near FM 55.

Line ownerWhat it isSourceSize
City of Blooming GrovePublic water systemSurface water bought from another system444 connections, 857 people served
Oncor Electric Delivery Company and Navarro County Electric CooperativeElectric utilities reporting service in Navarro CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Blooming Grove’s median housing year at 1963; 44 percent of homes were built before 1960, 53 percent from 1960 to 1999 and 3 percent in 2000 or later. That mix can mean replacement work alongside new service routes on streets such as Forgey Street. Along Fordyce Street, we hydrovac pothole each marked utility on the bore path before drilling near it. For a proposed conduit route below Forgey Street, paint shows position, not depth, so each marked line must be exposed.

Trinity Boring Solutions crew running a 2 inch conduit directional bore with airport hangars and a parked jet in the background in Oklahoma City
Our crew running a 2 inch conduit bore near the hangars at an Oklahoma City airport.

Where is Blooming Grove near Frost?

Blooming Grove is an incorporated town in Navarro County, at elevation 601 feet, with 0.86 square miles of land and ZIP code 76626. Barry is 4.5 miles east, and Frost is 5.4 miles west; Emhouse is 9.5 miles northeast. Corsicana, the county seat and nearest larger city, is 14.7 miles east. From our Yukon, Oklahoma main office, the drive to Blooming Grove is 276 road miles and 5.6 hours, which is part of planning crew mobilization for a job near FM 55.

Places near Blooming Grove

What would we bore near Fordyce Street in Blooming Grove?

  • Highway crossing: A bore beneath FM 55 can carry water, sewer or conduit without opening the existing pavement across the route.
  • Water service: A connection near the City of Blooming Grove water system can link a property to a line after the route and owner are confirmed.
  • Fiber route: A fiber bore along Fordyce Street can follow the street corridor while keeping pavement and driveways uncut.
  • Creek crossing: A proposed line beneath Rush Creek needs a planned channel route and a jurisdiction check during planning.
  • Street conduit: Electric conduit near Kerr Street can be bored past marked lines after hydrovac exposure confirms their depth.
  • Service extension: A line near Hinckley Street can run from a property toward a connection point, with length and access shaping the plan.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for work near Hinckley Street in Blooming Grove?

For a quote near Hinckley Street, give us the address or map pin, what will go in the ground, the pipe or conduit size and the footage. A sketch or plans help show whether the route approaches FM 55, Rush Creek or existing lines. Those details let us consider access and the likely bore path before preparing a scope.

Crockett clay is a leading price factor because it can cling to the reamer and call for staged work. The route’s length and pipe size matter too, as do utilities to expose, pavement near FM 55, and any creek or drainage crossing near Rush Creek. Pit work, excavator time and sand backfill can change the scope. At 276 road miles from Yukon, mobilization also enters the estimate.

Questions people ask about boring in Blooming Grove

Does Trinity take directional boring jobs in Blooming Grove and Navarro County?

Yes. We take directional boring work in Blooming Grove, and our crews or vetted partner drilling contractors can staff the job. The required service model keeps Trinity involved from the first call through the bore log, regardless of which crew is on site. Routes near Navarro County’s Rush Creek are planned for the actual ground and crossings.

Who approves a bore under FM 55 in Blooming Grove?

TxDOT reviews work in the FM 55 right of way through the TxDOT Dallas District. The utility that owns the line submits the application in RULIS, while we prepare the bore plan and profile and work under the owner’s permit. The line type and crossing determine the required cover for the FM 55 route.

Can you bore a line beneath Rush Creek in Blooming Grove?

A line can be planned to pass beneath Rush Creek, which has 0.43 channel miles inside Blooming Grove. The route and depth need to account for the channel, and planning checks whether the crossing falls under U.S. Army Corps of Engineers jurisdiction. We review the proposed line and site conditions before setting a bore plan.

In Navarro County, who runs Blooming Grove’s public water system and where is its source?

When planning underground work on Granger Street, we account for Blooming Grove’s city owned public water system and its purchased surface water. With 444 service connections serving 857 people, we plan utility checks carefully before underground work on 3rd Street in Blooming Grove. For a bore near a water line on Kerr Street, the specific line and connection point still need confirmation before we plan the route.

Which electric utilities report service in Blooming Grove and Navarro County?

Oncor Electric Delivery Company and Navarro County Electric Cooperative report electric service in Navarro County, but that does not identify the provider at every Blooming Grove address. We confirm the line owner and conduit specifications before planning an electric conduit bore, including a route along FM 55.

Who controls Forgey Street in Blooming Grove, and does a bore require cutting it?

Because Blooming Grove is incorporated, we treat Kerr Street as a city street when planning and coordinating underground work. A directional bore along or beneath Forgey Street can avoid cutting the road surface, with pits placed in dirt where the site allows. The route still needs to account for marked utilities and the street’s actual access conditions.

How far is Blooming Grove from Trinity’s Yukon office, and does Corsicana affect the job?

Blooming Grove is 276 road miles and a 5.6 hour drive from our Yukon, Oklahoma main office, so we plan mobilization accordingly. Corsicana is 14.7 miles east and is the county seat and nearest larger city. The distance from Yukon affects mobilization, while the route near Corsicana or FM 55 helps define access and scope.

How much notice does Texas811 need for a bore near Kerr Street in Blooming Grove?

For a bore near Kerr Street, Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. On Elm Street projects, we plan around Texas811’s stated notice of at least two working days for utility marking. If the start slips more than 14 days past the original notice, request a new ticket; worn or moved marks must be refreshed through Texas811 before work continues.

What affects directional boring costs near FM 55 in Blooming Grove?

The price depends on the route and scope. Crockett clay can affect reaming, while pipe size, bore length, utilities to expose, pavement at FM 55 and a crossing near Rush Creek also matter. Pits, excavator time, sand backfill and mobilization from Yukon can change the work required for a particular address.

Where the Blooming Grove facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Blooming Grove

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Blooming Grove, Texas

Type the address of your job in Blooming Grove. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Blooming Grove

Same county: Kerens · Rice · Dawson · Mildred · Angus · Retreat · Oak Valley · Eureka · Richland · Navarro · Goodlow · Powell. All counties: Texas county list.