trinityboringsolutions.com

Kerens Texas Directional Boring: Wilson Clay, Texas State Highway 31 and Union Pacific

Quick Answer: Kerens has Wilson clay, and we do directional boring, also called horizontal directional drilling (HDD), for routes under Texas State Highway 31. Kerens is 287 road miles from our Yukon, Oklahoma main office, with Union Pacific track crossings to plan around. The USDA soil survey maps clay at 40 inches across 99% of the city. Sticky clay can ball on a reamer and grip pipe, so the bore needs a careful fluid and reaming plan.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Kerens bores at a glance

  • Incorporated city in Navarro County, Texas. Population 1,508 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 287 miles, about 5.6 hours of driving.
  • Ground: Wilson soil is mapped on 53 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 1 percent of the area.
  • Highways inside the boundary: Texas State Highway 31, Texas State Highway 309, FM 3096, FM 636 and FM 309. State permit office: TxDOT Dallas District.
  • Railroad track inside the boundary: Union Pacific, with 12 mapped street and rail crossings.
  • Named streams inside the boundary: Indian Creek and Cemetery Creek.
  • Public water: City of Kerens, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring near 2nd Street in Kerens?

Wilson clay loam is common in Kerens, where sticky ground can cling to a reamer. We take directional boring work in Kerens and across Texas, including routes along 2nd Street and Texas State Highway 31. The Census Bureau Vintage 2024 estimate puts Kerens at 1,508 people in Navarro County. Our crews install water, sewer, gas, electric conduit and fiber lines, routing them beneath local streets or other crossings.

Our main office is in Yukon, Oklahoma, and Kerens work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For Kerens work, our family business brings directional boring experience dating to 1982, after starting in 1965. For a Kerens route, our equipment handles lines from 3/4 inch service lines to 48 inch casing, with bore lengths from 10 feet to 5,000 feet.

Horizontal directional drill rig set up on an open grass field with support trucks and a vacuum excavation truck
Our horizontal directional drill set up in an open field with the support trucks and the vacuum excavation truck. Photos on this page are from our jobs in Oklahoma and Texas.

How does Wilson soil affect a bore in Kerens?

The USDA soil survey maps Wilson soil across 53% of Kerens, with Wilson clay loam, 0 to 1 percent slopes, covering 51%. Burleson clay is another mapped unit, at 31%. Mapped soil patterns guide our Kerens planning, but we do not treat them as test borings. At about 40 inches below the surface, the survey maps clay across 99% of the area, with average clay content of 47%. Surface textures are mostly clay loam at 54% and clay at 32%. This sticky ground can build up on a reamer and swell around pipe, so fluid and reaming need control.

USDA soil survey, inside the Kerens city limitsWhat is mapped
Soil series mappedWilson 53 percent, Burleson 32 percent, Mabank 8 percent and Blum 4 percent
Texture at the surfaceclay loam 54 percent, clay 32 percent and very fine sandy loam 8 percent
Texture about 40 inches downclay 99 percent
Engineering class about 40 inches downfat clay (CH) 91 percent and lean clay (CL) 9 percent
Average clay content about 40 inches down47 percent
Bedrock mapped within 60 inches1 percent of the area (0 percent hard rock, 1 percent weathered rock)
Seasonal water table within 60 inches55 percent of the area
Flood prone soils1 percent of the area
High corrosion risk for uncoated steel99 percent of the area

Bedrock is not mapped in Kerens in the top five feet, though weathered bedrock is mapped in 1% of the area within 60 inches. The geologic map shows terrace deposits of sand, silt, clay and gravel from the Cenozoic, with Paleocene sedimentary deposits also present. A seasonal water table is mapped within 60 inches across 55% of the area, so Kerens pits may need pumping. Flood prone soils cover 1%. High steel corrosion risk is mapped across 99%, a reason to discuss casing and tracer wire materials with the line owner.

How do crews handle clay when boring in Kerens?

For Kerens clay, we use controlled fluid and staged reaming so sticky Wilson soil does not load the tool or grip the pipe. Indian Creek and local pavement crossings also shape the bore plan.

  1. In Kerens Wilson clay, we use a thinner drilling fluid and polymer to limit sticky buildup, then enlarge the hole in stages before bringing pipe through.
  2. Because heavy clay is mapped through much of Kerens, we watch fluid returns near Texas State Highway 31 so pressure does not lift pavement.
  3. With a seasonal water table mapped within 60 inches across 55% of Kerens, we keep pits small and pump water when needed.
  4. At 2nd Street, we expose marked utilities with hydrovac before the drill approaches; paint shows position, not depth, and the locator tracks the head.
Walkover locator at the edge of the wetland on a directional bore at the Cimarron site in Logan County, Oklahoma
Walkover locator at the edge of a wetland on a directional bore in Logan County, Oklahoma.

Where does a line have to go under Union Pacific in Kerens?

Kerens bores may need to pass beneath Texas State Highway 31, which has 5.5 mapped roadway miles inside the city, or Texas State Highway 309, with 1.6 miles. FM 3096 and FM 636 also run within the limits. Among named streets, 2nd Street is longest at 3.43 miles, followed by 1st Street at 1.64 miles and 4th Street at 1.62 miles. A bore can keep these paved routes uncut, with entry and exit pits placed off the pavement.

CrossingTypeMapped extentWho has a say
Texas State Highway 31State highway5.5 roadway miles insideState highway office
Texas State Highway 309State highway1.6 roadway miles insideState highway office
FM 3096State highway0.8 roadway miles insideState highway office
FM 636State highway0.6 roadway miles insideState highway office
FM 309State highway0.4 roadway miles insideState highway office
Union PacificRailroad2.28 track miles insideThe railroad
Indian CreekStream0.36 channel miles insideChecked for Corps of Engineers jurisdiction
Cemetery CreekStream0.12 channel miles insideChecked for Corps of Engineers jurisdiction
Cow CreekStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Rush CreekStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Kerens City LakeLake or pond81 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific owns 2.28 track miles in Kerens, and public mapping shows 12 street and rail crossings in the city. A line crossing that track needs an agreement from the railroad; its terms set details such as casing, depth and flagging. Indian Creek runs 0.36 channel miles in Kerens, and Cemetery Creek runs 0.12 miles. Four mapped street crossings intersect named streams. Kerens City Lake is within one mile but outside city limits.

Whose permission does a bore in Navarro County need in Kerens?

For a bore beneath Texas State Highway 31 in Kerens, the utility owner applies for a TxDOT utility permit through RULIS, and the TxDOT Dallas District reviews it. The owner submits the application; we prepare the bore plan and profile and work under its permit. TxDOT cover rules set the starting depth: electric and communication lines need 60 inches at crossings, while water needs 60 inches and pressurized sewer needs 60 inches. The district may set another depth. Kerens’s incorporated status puts 2nd Street under city control. A Union Pacific crossing needs the railroad’s agreement, and Indian Creek is checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground near the City of Kerens water system?

The City of Kerens public water system uses purchased surface water and has 638 service connections serving 1,520 people. A bore near that system needs its route planned around existing water lines. Oncor Electric Delivery Company and Navarro County Electric Cooperative report electric service in Navarro County; the line owner for a specific Kerens address is confirmed before an electric conduit bore is planned.

Line ownerWhat it isSourceSize
City of KerensPublic water systemSurface water bought from another system638 connections, 1,520 people served
Oncor Electric Delivery Company and Navarro County Electric CooperativeElectric utilities reporting service in Navarro CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates give Kerens a median housing year of 1970: 18% of units were built before 1960, 74% from 1960 to 1999 and 8% in 2000 or later. That mix can mean work on older lines as well as new service connections along 2nd Street. We hydrovac pothole marked utilities on the bore path before drilling near them, since surface marks do not show depth.

Coiled black HDPE conduit fitted with a pulling grip staged on a lawn along a completed bore path
Coiled HDPE conduit fitted with a pulling grip, staged on a lawn along a finished bore path.

Where is Kerens in relation to Corsicana?

Kerens is in Navarro County, 14.5 miles east of Corsicana, the county seat and nearest larger city. The city covers 2.5 square miles at an elevation of 366 feet, and ZIP code 75144 serves Kerens. Nearby Goodlow is 1.7 miles south, Powell is 5.8 miles west, and Trinidad is 7.1 miles east. Mildred lies 8.3 miles southwest. From our Yukon, Oklahoma main office, Kerens is 287 road miles away, a 5.6 hour drive. That distance is part of planning mobilization for work near Texas State Highway 31.

Places near Kerens

What would we bore beneath 1st Street in Kerens?

  • Highway crossing: A bore beneath Texas State Highway 31 can keep the travel lanes intact, with the utility owner arranging the TxDOT permit.
  • Water service: A service near the City of Kerens water system needs a route checked against existing water lines before drilling.
  • Fiber route: Fiber along 2nd Street can pass beneath pavement in a bore, avoiding an open cut across the street.
  • Creek crossing: A route beneath Indian Creek can leave the channel banks uncut, with jurisdiction checked during planning.
  • Rail crossing: A line beneath Union Pacific track in Kerens needs the railroad agreement to set crossing conditions.
  • Street utility: A bore near 1st Street can carry water, sewer, gas, electric conduit or fiber beneath the roadway.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Kerens bore under Texas State Highway 31?

A map pin matters in Kerens because the route could be near Texas State Highway 31, Union Pacific track or Indian Creek. Send the job address or pin, what will go underground, pipe or conduit size, and footage. A sketch or plans help us see the alignment and the crossings before we scope the work.

Wilson clay is a leading factor because sticky soil can load the reamer and hold the pipe. The number of utilities to expose, the pipe or conduit size, and the route length also affect the plan. A crossing beneath Texas State Highway 31 or Union Pacific track adds specific crossing details, while Indian Creek may need a water crossing review. Pavement, pits, excavator time, backfill, emergency timing and mobilization from 287 road miles away in Yukon also shape the job price.

Questions people ask about boring in Kerens

Does Trinity take directional boring jobs in Kerens and Navarro County?

Yes, we take directional boring work in Kerens and across Texas. The work is handled by our own crews or crews from satellite yards run by partner drilling contractors we have vetted. You deal with Trinity from the first call through the bore log, including a route near 2nd Street or Texas State Highway 31.

Does Wilson soil in Kerens pose a corrosion concern, and what pipe can be used?

The USDA soil survey maps high steel corrosion risk across 99% of Kerens, including areas with Wilson soil. HDPE avoids the soil corrosion concern associated with uncoated steel. For steel casing or tracer wire, the line owner chooses suitable coatings and materials for the route.

What ground is mapped below Kerens near Wilson soil at 40 inches?

At about 40 inches below the surface, the USDA soil survey maps clay across 99% of Kerens, with average clay content of 47%. Wilson soil is the leading soil series at 53% of the city. Clay can stick to the reamer and swell around pipe, so the drilling plan accounts for sticky cuttings.

Will a bore in Kerens hit rock near Indian Creek?

We treat Kerens mapping as showing no bedrock in the top five feet, while allowing for deeper rock. The geologic map shows Cenozoic terrace deposits and Paleocene sedimentary material. We plan Kerens bores around available ground information, treating the mapped top five feet as limited depth guidance.

Who approves our bore under Texas State Highway 31 in Kerens?

The utility owner applies for the TxDOT utility permit in RULIS, and the TxDOT Dallas District reviews a Kerens crossing under Texas State Highway 31. We provide the bore plan and profile for the owner’s application and work under the permit issued to that owner. TxDOT cover requirements guide the bore depth.

What does our bore under Union Pacific track in Kerens require?

Union Pacific owns 2.28 track miles in Kerens. A crossing requires an agreement with the railroad, which sets crossing conditions such as casing, depth and flagging. The mapped 12 street and rail crossings in the city make track location an important part of checking a proposed route.

What bore sizes and lengths can Trinity handle near 3rd Street in Kerens?

Near 3rd Street in Kerens, we handle lines from 3/4 inch service lines up to 48 inch casing. Bore lengths range from 10 feet to 5,000 feet. The route, ground and crossings determine which equipment and setup fit the job, including whether the path passes under a street or utility.

How much notice does Texas811 need for a Kerens bore near 2nd Street?

For a bore near 2nd Street, submit a Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. For a Kerens start, we submit a new request if work moves more than 14 days past the original notice. On Kerens work, we have worn or moved marks refreshed through Texas811 before continuing underground work.

What affects the cost of a Kerens bore under Texas State Highway 31?

The price depends on the route and scope. Wilson clay, line size, footage, utilities to expose, pavement and pits all affect the work. A Texas State Highway 31 crossing adds highway planning, while Union Pacific track or Indian Creek can add crossing requirements. Mobilization also reflects Kerens’s 287 road miles from our Yukon main office.

Where the Kerens facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Kerens

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Kerens, Texas

Type the address of your job in Kerens. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Kerens

Same county: Rice · Blooming Grove · Dawson · Frost · Angus · Retreat · Oak Valley · Richland · Barry · Navarro · Emhouse. All counties: Texas county list.