trinityboringsolutions.com

Mildred Texas Directional Boring: Crockett Soil, Cedar Creek and US 287

Quick Answer: We take directional boring and horizontal directional drilling (HDD) work in Mildred, Texas, including routes planned beneath US 287. Mildred is 285 road miles from our Yukon, Oklahoma main office, a distance to consider for a Providence Road project. USDA soil survey maps Crockett across most of town, with clay mapped about 40 inches down. That sticky layer can grip pipe during pullback, so staged reaming and a same day pull can matter.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Mildred bores at a glance

  • Incorporated city in Navarro County, Texas. Population 458 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 285 miles, about 5.7 hours of driving.
  • Ground: Crockett soil is mapped on 78 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 80 percent of the area.
  • Highways inside the boundary: US 287, FM 637 and FM 2859. State permit office: TxDOT Dallas District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Cedar Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring near Cedar Creek in Mildred?

Mildred is an incorporated town in Navarro County, so its public streets belong to the town itself. The Census Bureau Vintage 2024 estimate puts the population at 458. Along Providence Road or US 287, we install water, sewer, gas, electric conduit and fiber lines by boring where the route and site conditions allow, rather than cutting across the street.

Our main office is in Yukon, Oklahoma, and Mildred work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business started in 1965, and we have drilled directionally since 1982. The range from 3/4 inch service lines to 48 inch casing covers small connections near Old Mildred Road and larger crossings on US 287.

Compact Ditch Witch drill rig boring a new utility line across a front yard on a residential street in Edmond, Oklahoma
Our compact Ditch Witch drill boring a new utility line across a front yard on a residential street in Edmond, Oklahoma. Photos on this page are from our jobs in Oklahoma and Texas.

What ground does Crockett soil mean for a Mildred bore?

The USDA soil survey maps Crockett soil across 78 percent of Mildred and Mabank across 14 percent. Fine sandy loam is the leading surface texture, mapped over 75 percent of the area, but the deeper profile changes: clay is mapped at about 40 inches in 95 percent of the area. Average clay content at that depth is 44 percent, and the mapped clay types are mostly CH. These are soil survey patterns, not test borings. For a bore near Southeast 3020, sticky clay can build on a reamer and grip the pipe.

USDA soil survey, inside the Mildred city limitsWhat is mapped
Soil series mappedCrockett 78 percent and Mabank 14 percent
Texture at the surfacefine sandy loam 75 percent, very fine sandy loam 14 percent and loam 4 percent
Texture about 40 inches downclay 95 percent
Engineering class about 40 inches downfat clay (CH) 82 percent and lean clay (CL) 16 percent
Average clay content about 40 inches down44 percent
Bedrock mapped within 60 inches80 percent of the area (0 percent hard rock, 80 percent weathered rock)
Seasonal water table within 60 inches1 percent of the area
Flood prone soils1 percent of the area
High corrosion risk for uncoated steel97 percent of the area

Weathered bedrock is mapped within 60 inches across 80 percent of Mildred, with typical depth at 53 inches; bedrock within 40 inches is mapped across 2 percent. The Wills Point Formation, a Paleocene unit of clay and limestone, fits a route where the drill may slow at weathered rock. Seasonal water within 60 inches and flood prone soils are each mapped across 1 percent. High steel corrosion risk covers 97 percent, so the line owner should weigh casing and tracer wire materials; HDPE avoids that soil corrosion concern.

How do we drill through Mildred clay and Crockett soil?

Crockett soil gives Mildred bores a fine sandy loam surface over clay at about 40 inches. We plan the fluid and reaming around that sticky layer and check the route before the drill approaches marked lines.

  1. Crockett soil has fine sandy loam at the surface and clay deeper down, so we use thinner drilling fluid with polymer and open the hole in stages.
  2. Because Mildred’s mapped deeper soil is mostly heavy clay, we watch fluid returns near pavement to avoid pressure lifting the surface.
  3. Weathered bedrock is mapped within 60 inches across much of Mildred, so a route that reaches the Wills Point Formation may need slower drilling.
  4. Before drilling near marked utilities on Providence Road, we hydrovac expose them; a surface mark shows position, not burial depth.
Trinity Boring Solutions crew in hard hats at the exit pit with rock tooling on a sandstone bore in Guthrie, OK
Our crew at the exit pit with rock tooling on a sandstone bore in Guthrie, Oklahoma.

Where might a Mildred line go under Providence Road?

Mildred’s mapped roads include US 287, FM 637 and FM 2859, so a route can involve a US highway or a farm to market road as well as local streets. Providence Road is the longest named street at 2.28 miles in town. Old Mildred Road runs 2.15 miles, and Southeast 3020 runs 2.05 miles. A bore can pass beneath pavement without opening a trench across it, but the path, cover and access pits depend on the specific crossing.

CrossingTypeMapped extentWho has a say
US 287US highway7.4 roadway miles insideState highway office
FM 637State highway5.4 roadway miles insideState highway office
FM 2859State highway0.2 roadway miles insideState highway office
BNSF RailwayRailroad nearby0.3 miles outsideThe railroad
Cedar CreekStream0.94 channel miles insideChecked for Corps of Engineers jurisdiction
Crab CreekStream nearby0.9 miles outsideChecked for Corps of Engineers jurisdiction
Richland-Chambers ReservoirLake or pond3,517 acres, insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Mildred, but BNSF Railway track lies 0.3 miles outside the limits. Two mapped street crossings of named streams are in town. Cedar Creek has 0.94 channel miles inside Mildred, so a route near its banks needs a channel crossing plan. Richland-Chambers Reservoir is also mapped inside town limits; any water crossing is checked during planning for federal jurisdiction.

Who approves a Mildred bore in Navarro County?

Mildred is incorporated, so its public streets belong to the town; US 287, FM 637 and FM 2859 fall under TxDOT highway rules when work enters their right of way. Electric and communication lines crossing a highway need 60 inches of cover below the lowest crossed grade, and water lines also need 60 inches; pressurized sewer lines need the same crossing cover. For a highway route, the utility owner applies through TxDOT’s RULIS system, and the TxDOT Dallas District reviews it. We prepare the bore plan and profile for the owner’s application. A route near Cedar Creek is checked for Corps jurisdiction, while a BNSF Railway crossing requires the railroad’s agreement.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the utility lines in Navarro County near Mildred?

The water provider for the specific Mildred address has to be confirmed with the town, Navarro County or the local water district before a bore is planned. Electric service reported in Navarro County includes Oncor Electric Delivery Company and Navarro County Electric Cooperative; that does not establish which provider serves a particular address. Before we plan electric conduit along Providence Road, the line owner needs to be confirmed and its conduit specifications checked.

Line ownerWhat it isSourceSize
Oncor Electric Delivery Company and Navarro County Electric CooperativeElectric utilities reporting service in Navarro CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Mildred’s median housing year at 1982. The estimates show 16 percent of homes built before 1960, 57 percent from 1960 to 1999 and 27 percent in 2000 or later. On Old Mildred Road, that mix can mean either a replacement route or a new service. We hydrovac expose marked lines along the planned path because locate paint shows position, not depth.

Exposed underground utility line in a hand dug potholing pit before a directional bore in Oklahoma
An existing utility line exposed in a pothole before a directional bore in Oklahoma.

Do you cover Mildred and nearby Eureka?

Mildred is in Navarro County, at 373 feet elevation, and covers 2.3 square miles. ZIP code 75109 serves the town. Eureka is 4.2 miles southeast, Powell is 4.4 miles north, and Navarro is 4.6 miles southwest. Corsicana, the county seat and nearest larger city, is 8.7 miles west. From our Yukon, Oklahoma main office, the road distance is 285 miles and the drive is 5.7 hours, which matters when planning mobilization for a bore in Mildred.

Places near Mildred

What boring work comes up near Southeast 3020 in Mildred?

  • Highway crossing: A bore beneath US 287 can carry water, sewer or conduit while keeping the highway surface uncut.
  • Street service: A new line near Southeast 3020 can run below the street, with entry and exit pits placed in suitable ground.
  • Creek crossing: A route beneath Cedar Creek needs a planned depth that stays below the channel and a jurisdiction check.
  • Rail route: A proposed bore near BNSF Railway, just outside town limits, needs a route and crossing plan coordinated with the railroad.
  • Reservoir line: A utility route near Richland-Chambers Reservoir needs water crossing conditions considered during planning.
  • Local road bore: A connection along Old Mildred Road can use potholing to locate marked utilities before drilling near them.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Mildred bore near Thompson Trail?

For a Thompson Trail quote, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans help us lay out the route. If the alignment approaches Cedar Creek or a road crossing, include that detail so we can assess the route and access points.

A straight service route near Thompson Trail with few crossings is simpler to plan than a long run under US 287 or near Cedar Creek. The price depends on footage, pipe or conduit size, Crockett clay and any weathered rock, plus utilities to expose, pavement, creek crossings, pits and excavator time. Mobilization also matters because Mildred is 285 road miles from Yukon. Emergency timing or a high profile crossing can add planning and equipment needs.

Questions people ask about boring in Mildred

Does Trinity take directional boring jobs in Mildred, Navarro County?

Yes. We take directional boring work in Mildred, and Trinity stays responsible from the first call through the bore log. The work may be done by our own crews or by crews from a vetted partner drilling contractor. For a route on US 287, we plan the bore around the road and the line being installed.

What is needed to bore beneath BNSF Railway near Mildred?

For a route near Mildred, BNSF Railway sets crossing conditions through its agreement, including casing, depth and flagging. If the same line also occupies highway right of way, TxDOT asks for a copy of that agreement. The track is mapped 0.3 miles outside Mildred’s limits, so the proposed alignment determines whether a railroad crossing is involved.

Can a line be bored under Cedar Creek in Mildred?

A bore beneath Cedar Creek can be planned, but the route needs to stay below the channel and be checked for U.S. Army Corps of Engineers jurisdiction. The creek has 0.94 channel miles inside Mildred, and the entry and exit locations depend on the bank and proposed line.

Who owns electric lines in Mildred, Navarro County, and who confirms conduit specs?

Oncor Electric Delivery Company and Navarro County Electric Cooperative report electric service in Navarro County, but that does not identify the provider at every Mildred address. The owner of the line along Providence Road must be confirmed before an electric conduit bore, and that owner can confirm the conduit specifications.

Are Mildred streets like Southeast 3020 owned by the town, and must they be cut?

Mildred is incorporated, so its public streets belong to the town. A bore under Southeast 3020 can pass below the roadway without cutting the pavement; the route still needs workable pit locations and a review of marked utilities. Highway right of way on US 287 is handled under TxDOT rules.

Does housing age near Old Mildred Road affect replacement bores in Mildred?

It can affect what a replacement project needs to account for, but housing age does not establish the age or location of a buried line. The American Community Survey 2019 to 2023 estimates put Mildred’s median housing year at 1982. Near Old Mildred Road, we expose marked utilities before drilling close to them.

Can I reach Trinity after hours about an urgent bore near Southeast 3020 in Mildred?

Yes. A person answers Trinity’s phone at (405) 409-7423 24 hours a day, including for an urgent issue near Southeast 3020. We can discuss the location, line and access needed to assess the work. Trinity also provides 24 hour emergency response for projects in Mildred.

How much notice does Texas811 need for a bore near Providence Road in Mildred?

For a Providence Road bore, request the Texas811 locate at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. Marks show position, not depth. If the start slips more than 14 days past the original notice, submit a new request; worn or moved marks must be refreshed through Texas811 before work resumes.

What affects the cost of directional boring under US 287 in Mildred?

For a US 287 crossing, footage, pipe size, Crockett clay, weathered rock, pavement, utilities to expose and the required pits all affect the work. A creek or drainage crossing can add planning, and mobilization reflects Mildred’s 285 road miles from Yukon. The route and line type give us the basis for assessing the job.

Where the Mildred facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Mildred

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Mildred, Texas

Type the address of your job in Mildred. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Mildred

Same county: Kerens · Rice · Blooming Grove · Dawson · Frost · Retreat · Oak Valley · Richland · Barry · Emhouse · Goodlow. All counties: Texas county list.