Oak Valley Texas Directional Boring: Crockett Soil, FM 2555 and Cedar Creek
Quick Answer: Can you get a line under FM 2555 or Southwest 1070 without cutting the pavement? Yes, Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), for Oak Valley crossings. Cedar Creek is 0.4 miles from the town limits, and a planned bore can avoid cutting a road or creek bank. Oak Valley is 283 road miles from our Yukon, Oklahoma main office, with FM 2555 inside town. Crockett soil has heavy clay about 40 inches down, so the reamer and drilling fluid need careful control.
Oak Valley bores at a glance
- Incorporated city in Navarro County, Texas. Population 415 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 283 miles, about 5.6 hours of driving.
- Ground: Crockett soil is mapped on 44 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 44 percent of the area.
- Highways inside the boundary: FM 2555. State permit office: TxDOT Dallas District.
- Railroad track inside the boundary: none mapped.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring in Oak Valley near Cedar Creek?
Trinity Boring Solutions takes directional boring work in Oak Valley, Navarro County, including routes beneath FM 2555 and streets such as Liberty Drive. Can you get a line under Southwest 1070 or Cedar Creek without cutting the surface? Directional boring can make that crossing without an open cut. The Census Bureau Vintage 2024 estimate puts Oak Valley at 415 people. We install water, sewer, gas, electric conduit and fiber lines along local streets and roads.
Our main office is in Yukon, Oklahoma, and Oak Valley work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Since 1982, four decades of boring have shaped how we plan for Oak Valley’s Crockett soil, where clay can grip pipe during pullback. Our family business began in 1965, and the ground mapped around FM 2555 makes staged reaming and a timely pullback important.

What is Oak Valley ground like to bore in Crockett soil?
The USDA soil survey maps Crockett across 44% of Oak Valley and Axtell across 39%, with Gowen and Wilson also present. Fine sandy loam is the leading surface texture, but at 40 inches the survey maps clay across 92% of the area. Average clay content at that depth is 41%, while sandy ground is mapped across 2%. Crockett and Axtell mapped soil patterns guide our planning, but they are not test borings. For a bore near FM 2555, the deeper clay can stay open yet become sticky, ball up on a reamer and grip the pipe.
| USDA soil survey, inside the Oak Valley city limits | What is mapped |
|---|---|
| Soil series mapped | Crockett 44 percent, Axtell 39 percent, Gowen 7 percent and Wilson 5 percent |
| Texture at the surface | fine sandy loam 84 percent, clay loam 9 percent and loam 5 percent |
| Texture about 40 inches down | clay 92 percent and clay loam 4 percent |
| Engineering class about 40 inches down | fat clay (CH) 89 percent and lean clay (CL) 10 percent |
| Average clay content about 40 inches down | 41 percent |
| Bedrock mapped within 60 inches | 44 percent of the area (0 percent hard rock, 44 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 7 percent of the area |
| High corrosion risk for uncoated steel | 91 percent of the area |
Weathered bedrock is mapped within 60 inches across 44% of Oak Valley, with typical bedrock depth at 53 inches; hard bedrock is not mapped within that depth. The soil survey maps no seasonal water table within 60 inches, while flood prone soils cover 7%. High steel corrosion risk covers 91%, so the line owner should weigh casing and tracer wire materials. The geologic map identifies Late Cretaceous Nacatoch Sand, including silty clay lenses. Weathered rock can slow a bore, and a soil to rock change can affect steering.
How do crews handle clay in Oak Valley?
Oak Valley’s clay at about 40 inches calls for controlled fluid and staged reaming. We track the bore and manage the pullback so Crockett soil does not pack onto the reamer or grip the pipe.
- In Crockett clay, we use thinner fluid with polymer and open the hole through staged reaming to limit sticky buildup on the reamer.
- Because clay can swell around pipe, we prepare the line before the last ream and pull it back the same day the hole is opened.
- Heavy clay under Oak Valley can build pressure, so we watch fluid returns near FM 2555 to avoid lifting pavement.
- Before drilling near a marked utility along Liberty Drive, we hydrovac pothole it; a locator tracks the head and records depth and pitch.

Which roads, tracks or creeks can a bore cross in Oak Valley near Southwest 1070?
FM 2555 has 0.4 mapped roadway miles inside Oak Valley, and Texas State Highway 31 lies 1.0 mile outside the limits. A bore under either route needs a plan for its pavement and right of way. Southwest 1070 and Oak Valley Lane are the longest named streets at 2.64 miles each. Liberty Drive runs 1.62 miles, and Southwest 1090 runs 1.52 miles. These routes offer practical examples of where a utility crossing may need pits placed beyond the pavement.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 2555 | State highway | 0.4 roadway miles inside | State highway office |
| Texas State Highway 31 | Highway nearby | 1 miles outside | State highway office |
| Cedar Creek | Stream nearby | 0.4 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Oak Valley or within 1 mile outside it, and no mapped street and rail crossing is recorded in town. No named stream crosses the town limits either. Cedar Creek is 0.4 miles from the limits, and 0.07 miles of unnamed drainage is mapped inside town; no street crossing of a named stream is mapped. There are no lakes or ponds mapped within 1 mile. A planned Cedar Creek crossing still needs channel conditions considered.
Who approves a bore on Oak Valley roads in Navarro County?
Oak Valley city streets such as Liberty Drive are city streets, while a bore in the right of way of FM 2555 or nearby Texas State Highway 31 goes through TxDOT. For a state road, the line owner, not the driller, files the utility permit in TxDOT’s RULIS system. We provide the bore plan and profile for that filing and work under the permit issued to the owner. TxDOT’s Dallas District reviews the application. Required cover depends on the line: highway crossings call for 60 inches for electric or communications and water, and 60 inches for pressurized sewer. A permit may set a different depth.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns the electric and water lines in Oak Valley, Navarro County?
The water provider for a specific Oak Valley address has to be confirmed with the city, Navarro County or the local water district before a bore is planned. EPA drinking water records do not tie a provider to this town by name. Oncor Electric Delivery Company and Navarro County Electric Cooperative report electric service in the county, but that does not identify the line owner at every Oak Valley address. Confirm the owner before planning an electric conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Oncor Electric Delivery Company and Navarro County Electric Cooperative | Electric utilities reporting service in Navarro County | EIA Form 861 | Confirm the line owner by address |
Oak Valley’s median housing year is 1990, and we plan underground routes around site conditions rather than housing age. They estimate 1% of homes were built before 1960, 68% from 1960 to 1999, and 31% in 2000 or later. Work along Liberty Drive could involve either replacement of an existing service or a newer connection, so age alone cannot identify buried lines. We hydrovac pothole every marked utility on the bore path before the drill comes near it; locate paint shows position, not depth.

Where is Oak Valley in relation to Corsicana?
Oak Valley is an incorporated town in Navarro County, 4.7 miles southwest of Corsicana, the county seat and nearest larger city listed. The town covers 1.93 square miles and sits at an elevation of 431 feet. ZIP code 75110 serves Oak Valley. Retreat is 2.7 miles northeast, Corsicana is 4.7 miles northeast, Mustang is 5.1 miles east, Angus is 5.6 miles east, and Navarro is 8.1 miles east. Our Yukon, Oklahoma main office is 283 road miles away, a 5.6 hour drive, so distance is part of planning a mobilization to FM 2555.
Places near Oak Valley
- Directional boring in Retreat: 2.7 miles northeast
- Directional boring in Corsicana: 4.7 miles northeast
- Mustang: 5.1 miles east
- Directional boring in Angus: 5.6 miles east
- Directional boring in Navarro: 8.1 miles east
What boring work comes up in Oak Valley near Liberty Drive?
- Highway crossing: A bore beneath FM 2555 keeps the line out of the paved surface, with the route and pits planned around the right of way.
- Street service: A water or sewer line beneath Liberty Drive can pass below the street instead of opening a trench through the pavement.
- Fiber conduit: A route beneath Southwest 1070 can carry conduit across the street, with marked utilities exposed before drilling near them.
- Creek crossing: A route near Cedar Creek needs a plan for the channel and a check for federal jurisdiction during planning.
- Drainage bore: The 0.07 miles of unnamed drainage mapped in Oak Valley can affect bore depth and where entry and exit pits fit.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of Oak Valley boring near Southwest 1090?
For a quote near Southwest 1090, first send the address or map pin. Then tell us what will go in the ground, such as water service or fiber conduit along Liberty Drive. Give us the pipe or conduit size and the footage, such as a crossing beneath FM 2555. A sketch or plans help show pits, pavement and nearby utilities.
Crockett clay is the first price factor because it can load a reamer and grip pipe, which affects fluid, reaming and pullback. The size and length of a line, marked utilities to expose, and pavement near FM 2555 also shape the work. A Cedar Creek or drainage crossing can add planning and access needs. Pits, excavator time and sand backfill count too. Oak Valley’s 283 road miles from Yukon affect mobilization, while high profile or emergency work can change the scope.
Questions people ask about boring in Oak Valley
Does Trinity Boring Solutions take Oak Valley jobs in Navarro County, and who staffs them?
Yes. We take directional boring work in Oak Valley and staff it with our crews or crews from vetted partner drilling contractors. We stay your contact from the first call through the bore log, whichever crew is on site. For a route under FM 2555, the job plan is tied to the line, ground and crossing.
Is there rock in Oak Valley, and how much is mapped within five feet?
Weathered bedrock is mapped within 60 inches across 44% of Oak Valley, and typical depth is 53 inches. Hard bedrock is not mapped within that depth, but a bore can still meet weathered rock. Near Crockett soil, a soil to rock transition may slow drilling or affect steering, so the route needs to account for changing ground.
Who approves an Oak Valley bore under FM 2555, and which TxDOT office reviews it?
TxDOT reviews a bore in the FM 2555 right of way, with the Dallas District handling the application. The line owner submits the utility permit through RULIS; the contractor does not file it. We prepare the bore plan and profile for the owner’s filing, and the approved permit governs work under the highway.
Can you bore a line under Cedar Creek near Oak Valley?
A bore can be planned under Cedar Creek, which is 0.4 miles from Oak Valley’s limits, but the route and channel need review first. Near Cedar Creek, we check whether the crossing falls under US Army Corps of Engineers jurisdiction during planning. A trenchless route can avoid cutting the creek bank, subject to the project plan and applicable approvals.
Which electric companies report service in Navarro County near Oak Valley, and who confirms conduit specs?
Oncor Electric Delivery Company and Navarro County Electric Cooperative report electric service in Navarro County. That does not establish which company owns lines at a specific Oak Valley address. Confirm the line owner and conduit requirements for the route before planning a bore near FM 2555 or a town street.
Who is in charge of Liberty Drive in Oak Valley, and does it need to be cut?
Liberty Drive is a city street because Oak Valley is incorporated. A directional bore can install a line beneath the street without cutting its pavement. The route still needs utility locates and exposed crossings, and a bore in the right of way of FM 2555 follows the state permit process.
Can I reach Trinity after hours about an urgent bore near Liberty Drive in Oak Valley?
Yes. Oak Valley is 283 road miles from our Yukon main office, and a person answers Trinity’s phone 24 hours a day at (405) 409-7423. For urgent work near Liberty Drive, share the address or map pin and what line needs to go in. A bore near FM 2555 may also need state right of way coordination, depending on the route.
How early should I call Texas811 for a bore along Southwest 1070 in Oak Valley?
For Southwest 1070, request locates at least 48 hours before excavation, leaving out Saturdays, Sundays and legal holidays. Do not request them more than 14 days ahead. For work along Southwest 1070, if the start slips more than 14 days past the original notice, we make a new request. Along FM 2555, we have worn or moved marks refreshed through Texas811 before work continues.
What affects the cost of an Oak Valley bore near FM 2555?
Crockett clay matters because it can affect reaming and pipe pullback. Price also depends on bore length, line size, utilities that must be exposed, pavement or concrete, drainage crossings, pits and excavator time. A route beneath FM 2555 may add right of way planning, and the 283 road miles from Yukon affect mobilization.
Where the Oak Valley facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Oak Valley
- U.S. Census Bureau, TIGER/Line 2024: Oak Valley boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Oak Valley
- U.S. Census Bureau, American Community Survey 2019 to 2023: Oak Valley housing units and year built
- Macrostrat geologic map compilation: map units under Oak Valley
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Navarro County
- U.S. Geological Survey, Elevation Point Query Service: Oak Valley elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Oak Valley
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Oak Valley
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Oak Valley, Texas
Type the address of your job in Oak Valley. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
