trinityboringsolutions.com

Evant Texas Directional Boring: Cho Soil, Langford Branch and US 281

Quick Answer: Along US 281, Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Evant. The town is 330 road miles from our Yukon, Oklahoma main office, so Brooks Drive work is staffed by our own crews or crews from vetted partner yards. Cho soil is common here, and gravelly ground below can cave behind the drill head. Langford Branch is a mapped stream crossing to account for in the bore plan.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Evant bores at a glance

  • Incorporated city in Coryell County and Hamilton County, Texas. Population 467 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 330 miles, about 6.7 hours of driving.
  • Ground: Cho soil is mapped on 57 percent of the area, with gravelly loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 7 percent of the area.
  • Highways inside the boundary: US 281, US 84 and FM 183. State permit office: TxDOT Waco District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Langford Branch.
  • Public water: City of Evant, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring on Brooks Drive in Evant?

From our Yukon yard, Evant is 330 road miles away, and work along Brooks Drive or US 84 is staffed by our own crews or crews from vetted partner contractor yards. The Census Bureau Vintage 2024 estimate puts Evant at 467 people across Coryell County and Hamilton County. We install water, sewer, gas, electric conduit and fiber where service routes follow streets such as Live Oak Street.

Our main office is in Yukon, Oklahoma, and Evant work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Since 1982, more than four decades of directional boring have shaped how our family business approaches the mix of Cho clay loam and gravelly ground mapped around Evant. Trinity began as a family business in 1965, and we stay involved from the first call through the bore log.

Compact Ditch Witch drill rig boring a new utility line across a front yard on a residential street in Edmond, Oklahoma
Our compact Ditch Witch drill boring a new utility line across a front yard on a residential street in Edmond, Oklahoma. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Evant’s Cho soil create for a bore?

The USDA soil survey maps Cho as the leading soil series in Evant, covering 57 percent of the mapped area. Cho clay loam and Cho gravelly clay loam together make up much of the mapped surface. At about 40 inches below ground, gravelly loam is mapped under 57 percent of the area, while clay is mapped under 21 percent and silty clay under 15 percent. For Evant boring plans, we consider the 34 percent average clay content at that depth alongside the local clay loam surface texture. Clay can cling to a reamer, while gravelly ground can loosen behind the drill head, so the fluid and reaming plan matters.

USDA soil survey, inside the Evant city limitsWhat is mapped
Soil series mappedCho 57 percent, Slidell 18 percent, Nuff 17 percent and Real 5 percent
Texture at the surfaceclay loam 39 percent, gravelly clay loam 25 percent and very stony silty clay loam 17 percent
Texture about 40 inches downgravelly loam 57 percent, clay 21 percent and silty clay 15 percent
Engineering class about 40 inches downclayey gravel (GC) 57 percent, fat clay (CH) 19 percent and elastic silt (MH) 17 percent
Average clay content about 40 inches down34 percent
Bedrock mapped within 60 inches7 percent of the area (0 percent hard rock, 7 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel36 percent of the area

The USDA soil survey maps bedrock within 60 inches in 7 percent of Evant, all of it weathered; hard bedrock is not mapped in that depth range. In Evant, seasonal water table and flood prone soils are not mapped, so we check site conditions when planning near Langford Branch. High steel corrosion risk is mapped under 36 percent of the area, so the line owner should consider casing and tracer wire materials; HDPE is not affected by that soil corrosion concern. The mapped Walnut Clay unit is Albian age and includes clay, limestone and shale, so a bore can meet changing materials even where shallow hard bedrock is not mapped.

How do crews handle Evant’s gravelly loam?

Evant’s gravelly loam at about 40 inches and its clay rich surface call for a controlled fluid and reaming plan. We track the drill head from the surface and log its depth and pitch as it advances.

  1. Cho clay can stick to the reamer, so we use a thinner fluid mix with polymer and open the hole in stages before pulling pipe.
  2. Gravelly loam is mapped under 57 percent of Evant at about 40 inches, so we keep the pipe ready before the final ream as loose ground can cave.
  3. Before a bore approaches a marked utility, we hydrovac pothole it; on Live Oak Street, that means exposing each marked line on the route to check its depth.
  4. At a US 281 pavement crossing, we track the head from the surface, log depth and pitch, and keep the bore beneath the travel lanes.
6 inch Schedule 40 PVC sleeve in a bore pit in sandy soil on a water main crossing at NE 24th Street, Oklahoma City
A 6 inch Schedule 40 PVC sleeve in a bore pit in sandy soil on a water main crossing in Oklahoma City.

What is in the way of a new line near Evant’s Langford Branch?

US 281, US 84 and FM 183 run within Evant, so a route that enters their rights of way needs careful depth and pavement planning. The longest named streets include Brooks Drive at 0.88 miles, Live Oak Street at 0.74 miles and Memory Lane at 0.72 miles. Bores under those streets can leave pavement and driveways uncut, with entry and exit pits set in dirt. A proposed route near a highway still needs to be checked against its right of way limits.

CrossingTypeMapped extentWho has a say
US 281US highway1.5 roadway miles insideState highway office
US 84US highway0.9 roadway miles insideState highway office
FM 183State highway0.7 roadway miles insideState highway office
Langford BranchStream0.1 channel miles insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Evant or within one mile of its limits, so there is no mapped rail crossing to plan around. Langford Branch runs 0.1 channel miles through town, and one street crossing of a named stream is mapped. A bore near the branch needs a route and depth plan that accounts for the channel; creek crossings are also checked during planning for U.S. Army Corps of Engineers jurisdiction. For Evant route planning in Coryell County, no lakes or ponds are mapped within one mile, which helps us review water constraints.

Do I need a permit to bore in Evant and Coryell County?

Evant is an incorporated town, so its city streets, including Brooks Drive, belong to the city itself. Work in the right of way of US 281, US 84 or FM 183 needs a TxDOT utility permit. Electric and communication lines crossing a highway need 60 inches of cover below the lowest crossed grade, and water needs 60 inches; the permit may set another depth. The line owner files in TxDOT’s online RULIS system for review by the TxDOT Waco District, while we prepare the bore plan and profile and work under the owner’s permit. Langford Branch is checked for federal jurisdiction during crossing planning. No railroad is mapped near town.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the lines near the City of Evant water system?

The City of Evant public water system is locally owned, serves 455 people through 227 service connections and draws from groundwater wells. For electric service in Coryell County, Oncor Electric Delivery Company, Texas New Mexico Power, Hamilton County Electric Cooperative Association, Heart of Texas Electric Cooperative and United Electric Cooperative Service report service. A conduit route on Brooks Drive needs the actual line owner confirmed before its specifications are set, since county service reports do not identify the provider at every address.

Line ownerWhat it isSourceSize
City of EvantPublic water systemGroundwater wells227 connections, 455 people served
Oncor Electric Delivery Company, Texas-New Mexico Power, Hamilton County Electric Cooperative Association, Heart of Texas Electric Cooperative and United Electric Cooperative ServiceElectric utilities reporting service in Coryell County and Hamilton CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

Evant’s 2019 to 2023 American Community Survey five year estimates put the median housing year at 1965, which we keep in mind when planning underground work. The estimates show 42 percent of homes built before 1960, 51 percent built from 1960 to 1999 and 7 percent built in 2000 or later. A project on Memory Lane may replace an older service or add a new one, and the buried lines can differ from house to house. We hydrovac pothole every marked utility on the planned bore path before the drill approaches it.

Exposed underground utility line in a hand dug potholing pit before a directional bore in Oklahoma
An existing utility line exposed in a pothole before a directional bore in Oklahoma.

Where is Evant in relation to Hamilton?

Evant is an incorporated town in Coryell and Hamilton counties, with 72 percent of its area in Coryell County and 28 percent in Hamilton County. It covers 0.61 square miles at an elevation of 1,250 feet, and its ZIP code is 76525. Hamilton is 15.6 miles north; Lometa is 22.9 miles southwest; Gatesville is 24.0 miles east and is the county seat and nearest larger city. Goldthwaite is 25.0 miles west. From the Yukon, Oklahoma yard, Evant is 330 road miles and a 6.7 hour drive, which affects mobilization for work on US 281.

Places near Evant

What would we bore along Live Oak Street in Evant?

  • Highway crossing: A route beneath US 281 needs a bore plan that accounts for the highway right of way, pavement and required cover.
  • Water service: A new service near the City of Evant system can connect through a planned route that avoids existing groundwater lines and marked utilities.
  • Fiber drop: A fiber conduit along Brooks Drive can pass beneath pavement and driveways, with potholes used to expose marked lines before drilling nearby.
  • Creek crossing: A route near Langford Branch needs depth planning for the channel and a check for U.S. Army Corps of Engineers jurisdiction.
  • Street service: A sewer or water line along Live Oak Street can be bored between dirt pits to avoid cutting the street surface.
  • Electric conduit: A conduit route near FM 183 starts with confirming the line owner and checking highway right of way requirements.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of an Evant bore near US 281?

For a quote on Brooks Drive or US 281, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage. A sketch or plans help us see the route, pits and marked crossings before we scope the work. The location matters because a route on a city street may be different from one that enters a TxDOT highway right of way.

The ground is the first variable: Evant’s Cho soils and gravelly loam can change reaming and fluid needs. Next, the number of utilities to expose and the pavement or concrete along Brooks Drive affect the work plan. Length and pipe size set the bore scale, while pits, excavator time and sand backfill add to the scope. A Langford Branch crossing also needs planning. Mobilization matters because Evant is 330 road miles from our Yukon yard.

Questions people ask about boring in Evant

Does Trinity Boring Solutions take directional boring work in Evant and Coryell County?

Yes. We take directional boring work in Evant, including routes along Brooks Drive and US 281. Our own crews and vetted partner contractor yards can staff the work, while Trinity remains the customer’s contact from the first call through the bore log. The Yukon office is 330 road miles away.

Is there rock under Evant, and how much bedrock is mapped?

The USDA soil survey maps bedrock within five feet under 7 percent of Evant, and that mapped bedrock is weathered. Hard bedrock is not mapped in that depth range. The Walnut Clay geologic unit includes limestone and shale, so deeper or changing material can still affect a bore near US 84.

For a bore under US 281 in Evant, do we need approval from the TxDOT Waco District?

TxDOT reviews utility permits for work in the US 281 right of way through the TxDOT Waco District. The utility owner submits the application in RULIS, and we provide the bore plan and profile for work under the permit issued to that owner. A highway crossing also has specified cover requirements.

Can a line be bored under Langford Branch in Evant?

A bore can be planned beneath Langford Branch, which runs 0.1 channel miles within town. The route needs to account for the channel, and creek crossings are checked during planning for U.S. Army Corps of Engineers jurisdiction. The mapped street and stream crossing makes the route details important.

In Coryell County, can we confirm who owns Evant’s public water system and whether groundwater wells supply it?

The City of Evant owns its public water system, supplied by groundwater wells, which we account for when planning underground work in town. Public records list 227 service connections serving 455 people. A bore near the system needs existing water lines identified and exposed where they are marked before the drill approaches.

Which electric companies report service in Coryell County near Evant?

Oncor Electric Delivery Company, Texas New Mexico Power, Hamilton County Electric Cooperative Association, Heart of Texas Electric Cooperative and United Electric Cooperative Service report electric service in the county. These reports do not establish the provider for each Evant address. Confirm the actual line owner before setting conduit specifications for a route on Brooks Drive.

Can I reach Trinity after hours for an urgent bore on Memory Lane in Evant?

Yes. A person answers Trinity’s phone at (405) 409-7423 24 hours a day, including for urgent work discussed for Memory Lane. We can ask about the route, what needs to go in the ground and any immediate access concerns before scoping the response.

How early should I call 811 before a bore on Brooks Drive in Evant?

The excavator or contractor arranging the bore should contact Texas811 and describe the route along Brooks Drive. Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If marks wear off or move, request refreshed marks through Texas811 before work continues.

When we estimate directional boring under US 281 in Evant, what route details affect the cost?

The local ground, including Cho clay and gravelly loam, can affect drilling time and reaming. Other factors include bore length and pipe size, utilities to expose, pavement, pits and excavator time, and any Langford Branch crossing. US 281 right of way work and mobilization from the Yukon yard also shape the job scope.

Where the Evant facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Evant

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Evant, Texas

Type the address of your job in Evant. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Evant

County: Hamilton County directional boring. Same county: Copperas Cove · Fort Hood · Oglesby · South Mountain · Flat · Mound · Hico · Carlton. All counties: Texas county list.