trinityboringsolutions.com

El Indio Texas Directional Boring: Montell Clay, Cuevas Creek and FM 1021

Quick Answer: The USDA soil survey maps Montell clay across 35 percent of El Indio and cemented bedrock at about 40 inches beneath 37 percent, so the top five feet can shift from sticky clay to weathered rock. We take directional boring, also called horizontal directional drilling (HDD), work in El Indio, where Cuevas Creek and FM 1021 are potential crossings. Our Yukon, Oklahoma main office is 610 road miles from Rancho Grande Street, which makes travel part of job planning. At about 40 inches, clay is mapped beneath 38 percent of the community, so we plan the reaming and drilling fluid for that ground.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

El Indio bores at a glance

  • Unincorporated community in Maverick County, Texas. Population 182 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 610 miles, about 12.3 hours of driving.
  • Ground: Montell soil is mapped on 35 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 39 percent of the area.
  • Highways inside the boundary: FM 1021 and FM 2644. State permit office: TxDOT Laredo District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Cuevas Creek and Cuervo Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring near Cuevas Creek in El Indio?

Trinity Boring Solutions takes directional boring work in El Indio, where Montell clay and mapped bedrock shape the bore plan. The top five feet here can include clay and weathered rock, so the route matters. El Indio is in Maverick County, and the Census Bureau counted 182 residents in the 2020 Census. Along Rancho Grande Street or Canal Street, we install water, sewer, gas, electric conduit and fiber lines by boring.

Our main office is in Yukon, Oklahoma, and El Indio work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Since 1982, four decades of boring have shaped how we plan for ground like the sticky Montell clay and mapped bedrock in El Indio. Our family business began in 1965, and we carry that experience from the first call through the bore log.

Horizontal directional drill rig set up on an open grass field with support trucks and a vacuum excavation truck
Our horizontal directional drill set up in an open field with the support trucks and the vacuum excavation truck. Photos on this page are from our jobs in Oklahoma and Texas.

How does Montell soil affect drilling in El Indio?

The USDA soil survey maps Montell soil across 35 percent of El Indio, with Copita sandy clay loam mapped across 25 percent. At about 40 inches below the surface, clay is mapped beneath 38 percent of the area, while cemented bedrock is mapped beneath 37 percent. We use the 45 percent average clay content at that depth to inform boring plans where El Indio surface soil is clay. Across El Indio, soil series such as Montell are mapped patterns, so we do not treat them as test borings. On a route near FM 1021, sticky clay can ball on a reamer and grip pipe, so staged reaming and a same day pull can matter.

USDA soil survey, inside the El Indio mapped community boundaryWhat is mapped
Soil series mappedMontell 35 percent, Copita 25 percent, Elindio 23 percent and Verick 12 percent
Texture at the surfaceclay 36 percent, sandy clay loam 25 percent and silty clay loam 23 percent
Texture about 40 inches downclay 38 percent, cemented bedrock 37 percent and clay loam 23 percent
Engineering class about 40 inches downfat clay (CH) 36 percent and lean clay (CL) 25 percent
Average clay content about 40 inches down45 percent
Bedrock mapped within 60 inches39 percent of the area (0 percent hard rock, 39 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel86 percent of the area

The survey maps weathered bedrock within 60 inches across 39 percent of El Indio, with a typical bedrock depth of 29 inches; the Escondito Formation is Late Cretaceous clay, sandstone, siltstone and limestone. That mix calls for checking the route for a soil to rock change. Seasonal water table and flood prone soils are not mapped, but Cuevas Creek still needs route planning. High steel corrosion risk is mapped across 86 percent, so the line owner should consider material choices for steel casing and tracer wire.

What does directional boring through El Indio clay near FM 1021 require from our planning?

Montell clay and bedrock mapped within five feet make an El Indio bore a route specific job. We choose fluid, reaming steps and tooling for the ground shown along the proposed path, not just the street name.

  1. In Montell clay, we use thinner fluid with polymer and ream in stages, since sticky cuttings can ball on the reamer and clay can grip the pipe.
  2. Where the survey maps heavy clay near Rancho Grande Street, we watch fluid returns and pressure so drilling does not lift pavement.
  3. Because cemented or weathered bedrock is mapped within five feet in parts of El Indio, we check depth and pitch as the head approaches a soil to rock change.
  4. Before a bore near Cuevas Creek, we expose each marked utility on the path with hydrovac potholing, then track the drill head and log depth and pitch.
Vermeer D24x40 S3 Navigator and water truck at the entry of a 385 foot sandstone rock bore above the wetland in Guthrie, Oklahoma
Our Vermeer D24x40 and water truck at the entry of a 385 foot sandstone rock bore in Guthrie, Oklahoma.

Where might a line go under Rancho Grande Street in El Indio?

FM 1021 and FM 2644 run inside the mapped El Indio community boundary, with 1.8 roadway miles of FM 1021 and 0.4 miles of FM 2644. A line beneath either state road needs a planned bore profile and cover depth. Rancho Grande Street is the longest named street at 1.06 miles, followed by Canal Street at 0.82 miles and Stone Ranch Road at 0.5 miles. Those routes can put pavement, driveways or existing utilities in the bore path, so we plan pits outside the surface to be preserved.

CrossingTypeMapped extentWho has a say
FM 1021State highway1.8 roadway miles insideState highway office
FM 2644State highway0.4 roadway miles insideState highway office
Cuevas CreekStream2.41 channel miles insideChecked for Corps of Engineers jurisdiction
Cuervo CreekStream0.4 channel miles insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside the El Indio boundary or within one mile outside it, and no street and rail crossing is mapped. Cuevas Creek runs 2.41 channel miles through the community, and Cuervo Creek runs 0.4 miles. Public road crossings of named streams are mapped at three locations. A bore near either creek needs a route that accounts for the channel, while no lakes or ponds are mapped within one mile.

Whose permission does El Indio work in Maverick County need?

El Indio has no city government, so a street bore is handled by Maverick County or the state according to the road owner; FM 1021 and FM 2644 are state highways. For work in their right of way, the line owning utility applies through TxDOT’s online RULIS system, and the TxDOT Laredo District reviews it. Electric and communication crossings need 60 inches of cover below the lowest crossed grade; water crossings need 60 inches, and pressurized sewer crossings need 60 inches. Existing highway pavement is crossed by boring or tunneling. Cuevas Creek planning includes checking for U.S. Army Corps of Engineers jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities serve addresses in El Indio, Maverick County?

The water provider for an El Indio address has to be confirmed with the county or local water district before a bore is planned; EPA drinking water records do not match a named system to the community. AEP Texas Central and Rio Grande Electric Cooperative report electric service in Maverick County, but neither can be assumed to serve every address. Before planning electric conduit under Canal Street, we confirm the line owner and its conduit specifications for that route.

Line ownerWhat it isSourceSize
AEP Texas Central and Rio Grande Electric CooperativeElectric utilities reporting service in Maverick CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

Housing numbers are not published for a place as small as El Indio, so the survey cannot tell us how many buried services are older lines or new connections. Long service runs along FM 1021 or Rancho Grande Street can bring several marked lines into a bore path. We hydrovac pothole each marked utility before drilling near it; for example, a planned crossing under Stone Ranch Road needs the marked lines exposed because paint shows position, not depth.

Exposed underground utility line in a hand dug potholing pit before a directional bore in Oklahoma
An existing utility line exposed in a pothole before a directional bore in Oklahoma.

How far is El Indio from Chula Vista and our Yukon office?

El Indio is an unincorporated community in Maverick County, at an elevation of 737 feet and covering 1.75 square miles. ZIP code 78860 serves the area. Rosita is 10.9 miles northwest, Chula Vista is 12.5 miles northwest, and Eidson Road is 15.5 miles northwest. Eagle Pass, the county seat and nearest larger city listed, is 17.7 miles northwest. From our Yukon, Oklahoma main office, the drive to El Indio is 610 road miles and 12.3 hours, a distance that can affect crew and equipment mobilization.

Places near El Indio

What would we bore near Canal Street in El Indio?

  • Highway crossing: A bore beneath FM 1021 can keep the roadway uncut, with the line depth and right of way route planned for TxDOT review.
  • Water service: A service along Canal Street needs the address specific water provider confirmed before the bore route is set.
  • Fiber conduit: A conduit route under Rancho Grande Street can pass beneath pavement, with marked lines exposed before drilling near them.
  • Creek crossing: A proposed line beneath Cuevas Creek needs a channel route plan and a check for federal jurisdiction during planning.
  • Sewer line: A pressurized sewer crossing near FM 2644 needs a bore profile that accounts for highway cover requirements.
  • Electric conduit: Before a route near Stone Ranch Road is planned, we confirm which electric line owner serves the specific address.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of boring near FM 1021 in El Indio?

For a bore near FM 1021, start with the address or map pin, then tell us what goes underground, such as water or fiber. Give the pipe or conduit size and the footage along the proposed route. A sketch or plans showing a crossing of Cuevas Creek or Rancho Grande Street helps us see the path and access before we scope the work.

The job scope sets the price: Montell clay and mapped bedrock affect drilling and reaming, while the number of marked utilities to expose changes the work. Pavement, pits, excavator time, sand backfill and creek crossings also matter around Rancho Grande Street and Cuevas Creek. A bore in the FM 1021 right of way has highway planning needs, and the 610 road miles from Yukon affect mobilization. We may need to change scope for high profile or emergency boring work near Cuervo Creek in El Indio.

Questions people ask about boring in El Indio

Does Trinity Boring Solutions take jobs in El Indio, Maverick County, and how are crews assigned?

Yes, Trinity Boring Solutions takes directional boring work in El Indio and staffs it with our crews or crews from vetted drilling contractor partners. The work is managed through Trinity from the first call to the bore log. For a route near Rancho Grande Street, we plan the crew and equipment around the address and ground.

Will an El Indio bore hit rock, and how much is mapped within five feet?

Rock is mapped within five feet in parts of El Indio: the USDA soil survey maps bedrock within 60 inches across 39 percent of the area, all described as weathered bedrock. Cemented bedrock is mapped beneath 37 percent at about 40 inches. Hard bedrock is not mapped within 60 inches, but deeper conditions still depend on the route.

Who approves an El Indio bore under FM 1021?

For work in the FM 1021 right of way, the utility that owns the line submits the application through TxDOT’s RULIS system. The TxDOT Laredo District reviews it. We prepare the bore plan and profile for the utility owner’s application, including the cover depth needed for the proposed crossing in El Indio.

Can a line be bored under Cuevas Creek in El Indio?

A line can be planned to pass under Cuevas Creek, but the route, ground and channel conditions need review before the bore is set. The creek runs 2.41 channel miles through El Indio. During planning, we check whether the proposed crossing falls under U.S. Army Corps of Engineers jurisdiction.

Who owns electric lines in El Indio, Maverick County, and who confirms conduit specs?

AEP Texas Central and Rio Grande Electric Cooperative report electric service in Maverick County, but the owner serving a specific El Indio address must be confirmed. The line owner provides the conduit specifications for that bore. We make that confirmation before planning a conduit route along FM 1021 or another local road.

Who is responsible for Stone Ranch Road in El Indio, and must it be cut?

El Indio has no city government, so Stone Ranch Road is under county or state responsibility according to its road ownership. A directional bore can pass beneath the road without cutting the pavement. We plan the pits and route around marked lines and the access available at the specific crossing.

How much notice does Texas811 need for a bore along Rancho Grande Street in El Indio?

For a bore along Rancho Grande Street, Texas811 needs a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days beforehand. If our FM 2644 work start moves more than 14 days past the original notice, we submit a new request. Before work resumes near Rancho Grande Street, we have worn or moved marks refreshed through Texas811.

Does the distance from Chula Vista to El Indio change a job from Yukon?

From our Yukon, Oklahoma main office, El Indio is 610 road miles away, a 12.3 hour drive that shapes our scheduling. Chula Vista is 12.5 miles northwest of El Indio, but that nearby distance does not change the Yukon mobilization. Travel affects how we plan equipment and crew logistics for a bore near FM 1021.

What affects the cost of directional boring near FM 1021 in El Indio, including TxDOT Laredo District permit needs?

The price depends on the route and job scope near FM 1021, not on footage alone. Montell clay, mapped bedrock, pipe size, bore length, marked utilities, pavement and creek crossings all affect the work. Pit access, equipment time and mobilization from Yukon also factor into planning for an El Indio bore.

Where the El Indio facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in El Indio

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in El Indio, Texas

Type the address of your job in El Indio. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for El Indio

Same county: Elm Creek · Siesta Acres · Fabrica · Radar Base · Seco Mines · Quemado · Normandy. All counties: Texas county list.