trinityboringsolutions.com

Annetta South Texas Directional Boring: Aledo Soil, FM 5 and Turkey Creek

Quick Answer: FM 5 and Turkey Creek are key obstacles for utility routes, and Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Annetta South, Texas. The Yukon, Oklahoma main office is 232 road miles away, with FM 5 access part of the mobilization plan. USDA soil mapping shows bedrock commonly close to the surface, which can slow drilling and call for rock tooling. A site review sets the route, depth and crossing plan.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Annetta South bores at a glance

  • Incorporated city in Parker County, Texas. Population 703 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 232 miles, about 4.7 hours of driving.
  • Ground: Aledo soil is mapped on 22 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 86 percent of the area.
  • Highways inside the boundary: FM 5. State permit office: TxDOT Fort Worth District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Turkey Creek and Clear Fork Trinity River.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring in Annetta South, Parker County?

Trinity Boring Solutions takes directional boring work in Annetta South, Parker County, where FM 5 and neighborhood streets shape utility routes. The Census Bureau Vintage 2024 estimate puts the town at 703 people. We install water, sewer, gas, electric conduit and fiber, routing lines along Canyon Lake Drive or connecting properties across FM 5 where the plans allow.

Our main office is in Yukon, Oklahoma, and Annetta South work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Along FM 5, our record of no utility strike in over 25 years matters when new work meets existing lines; Oncor Electric Delivery Company is among the utilities reporting service in Parker County. The family business dates to 1965, and directional boring has been part of our work since 1982.

Trinity Boring Solutions branded compact directional drilling unit positioned beside a tree on a red dirt jobsite
Our compact directional drill set up beside a tree on a tight site. Photos on this page are from our jobs in Oklahoma and Texas.

What is Annetta South soil like to bore near Aledo?

The USDA soil survey maps Aledo soil across 22 percent of Annetta South, with Purves soil at 19 percent and Denton soil at 15 percent. About 40 inches below the surface, bedrock is the leading mapped texture at 70 percent; silt loam accounts for 16 percent and clay loam 8 percent. Surface mapping is 34 percent clay, with gravelly clay loam and clay loam also common. No sandy area is mapped at 40 inches. These are mapped patterns, not test borings, so a route near Canyon Lake Drive still needs site checks.

USDA soil survey, inside the Annetta South city limitsWhat is mapped
Soil series mappedAledo 22 percent, Purves 19 percent, Denton 15 percent, Brackett 14 percent and Maloterre 11 percent
Texture at the surfaceclay 34 percent, gravelly clay loam 33 percent and clay loam 27 percent
Texture about 40 inches downbedrock 70 percent, silt loam 16 percent and clay loam 8 percent
Engineering class about 40 inches downlean clay (CL) 20 percent and fat clay (CH) 8 percent
Average clay content about 40 inches down29 percent
Bedrock mapped within 60 inches86 percent of the area (71 percent hard rock, 15 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils8 percent of the area
High corrosion risk for uncoated steel27 percent of the area

The USDA soil survey maps bedrock within 60 inches across 86 percent of Annetta South, including hard bedrock across 71 percent and weathered bedrock across 15 percent; typical depth is 22 inches. That can mean slower drilling and a rock tool where the bore meets hard material. No seasonal water table is mapped within 60 inches, while flood prone soils cover 8 percent, so creek routes still need depth planning. High steel corrosion risk covers 27 percent. The mapped Paluxy Sand is an Early Cretaceous unit of sandstone and limestone.

How do crews bore Annetta South bedrock?

Annetta South soil maps show clay near the surface and bedrock commonly within five feet. We match the drilling setup to the ground, track the head as it advances, and keep the route clear of marked utilities along FM 5 and local streets.

  1. We check the route and expose each marked utility with hydrovac before drilling near it; a paint mark along Highland Drive shows position, not depth.
  2. Clay makes the reamer sticky, so we use thinner drilling fluid with polymer and staged reaming where Aledo and Purves soils are mapped.
  3. Bedrock is mapped within 60 inches across much of Annetta South, so we slow down and use rock tooling where the bore meets hard material.
  4. We track the drill head from the surface and log depth and pitch as a route advances beneath FM 5 or toward Turkey Creek.
Trinity Boring Solutions crew in hard hats at the exit pit with rock tooling on a sandstone bore in Guthrie, OK
Our crew at the exit pit with rock tooling on a sandstone bore in Guthrie, Oklahoma.

What does a bore have to cross in Annetta South near Turkey Creek?

FM 5 is the state highway through Annetta South, with 9.5 mapped roadway miles inside town limits. Routes also run along streets such as Canyon Lake Drive, McFarland Ranch Road and Highland Drive. Canyon Lake Drive is the longest named street at 0.97 miles, followed by McFarland Ranch Road at 0.72 miles and Highland Drive at 0.61 miles. The town has 18.15 public road centerline miles, so a route review needs to account for local street access as well as the highway.

CrossingTypeMapped extentWho has a say
FM 5State highway9.5 roadway miles insideState highway office
Turkey CreekStream2.27 channel miles insideChecked for Corps of Engineers jurisdiction
Clear Fork Trinity RiverStream0.82 channel miles insideChecked for Corps of Engineers jurisdiction
Bear CreekStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
Hale BranchStream nearby0.9 miles outsideChecked for Corps of Engineers jurisdiction
Little CreekStream nearby1 miles outsideChecked for Corps of Engineers jurisdiction
Lake MulletLake or pond101 acres, insideChecked for Corps of Engineers jurisdiction
Rule Evans Hollow LakeLake or pond38 acres, nearbyChecked for Corps of Engineers jurisdiction
Reservoir No 33Lake or pond19 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Railroads are not mapped inside Annetta South or within one mile, and no street and rail crossing is mapped. Turkey Creek runs 2.27 channel miles through town, while the Clear Fork Trinity River runs 0.82 miles; nine street crossings of named streams are mapped. Lake Mullet is also inside town limits. A route near Turkey Creek or the Clear Fork needs a crossing plan that accounts for the channel and nearby access.

Do I need a permit to bore under Annetta South FM 5?

For a bore under FM 5, TxDOT requires 60 inches of cover for electric and communication lines and water lines at highway crossings; pressurized sewer also needs 60 inches. The utility owner applies through TxDOT’s online RULIS system, and the TxDOT Fort Worth District reviews the request. We prepare the bore plan and profile for the owner’s application and work under the issued permit. TxDOT rules call for boring or tunneling beneath existing highway pavement, with casing at crossings. Annetta South city streets belong to the city. A Turkey Creek crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the electric lines in Annetta South, Parker County?

The water provider for a specific Annetta South address must be confirmed with the city, Parker County or the local water district before a bore is planned. County utility reports name Oncor Electric Delivery Company, Weatherford Municipal Utility System, Tri-County Electric Cooperative and Wise Electric Cooperative as reporting electric service. That list does not identify which company serves a particular address on Canyon Lake Drive, so confirm the line owner before planning an electric conduit bore.

Line ownerWhat it isSourceSize
Oncor Electric Delivery Company, Weatherford Municipal Utility System, Tri-County Electric Cooperative and Wise Electric CooperativeElectric utilities reporting service in Parker CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put the median housing year in Annetta South at 1991. Four percent of homes were built before 1960, 67 percent from 1960 to 1999 and 29 percent in 2000 or later. A project on Highland Drive could involve replacing an older line or adding service to newer housing. Before a bore crosses beneath Highland Drive, we hydrovac pothole each marked utility on the path; locate paint shows position, not depth.

Trinity Boring Solutions technician hydrovac daylighting along a commercial curbline during utility locating in Oklahoma City
Hydrovac daylighting along a commercial curb line in Oklahoma City to find the utilities before a bore.

How far is Annetta South from Annetta North and our Yukon office?

Annetta South is in Parker County, with Aledo 1.8 miles north and Annetta North 3.1 miles northwest. The incorporated town covers 1.91 square miles, sits at 840 feet elevation and uses ZIP code 76008. Annetta is 3.6 miles northwest. Aledo is the nearest larger city, while Weatherford, the county seat, is 10.6 miles northwest. The Yukon, Oklahoma main office is 232 road miles away, about a 4.7 hour drive; that distance is part of planning crew mobilization for work near FM 5.

Places near Annetta South

Which jobs call for a bore in Annetta South near Highland Drive?

  • Highway crossing: A utility route beneath FM 5 needs a bore plan that accounts for the highway pavement and required cover.
  • Water service: A new connection near Canyon Lake Drive needs its address specific water provider confirmed before the route is set.
  • Fiber drop: A fiber route along Highland Drive can pass beneath pavement without opening a trench across the street.
  • Creek crossing: A planned route under Turkey Creek needs channel depth planning and a check for federal waterway jurisdiction.
  • Electric conduit: A conduit route near McFarland Ranch Road starts with confirming the line owner and exposing marked utilities.
  • Water replacement: A line replacement along Hudson Lane can use a bore to cross a driveway or street without cutting the surface.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore in Annetta South near Canyon Lake Drive?

For a quote near Canyon Lake Drive, send the address or map pin first. Tell us what is going underground, such as water service or fiber, then give the pipe or conduit size and footage. A sketch or plans help show whether the route reaches FM 5, crosses a street or runs near Turkey Creek.

The price follows the route and job details, not footage alone. Ground is one factor: bedrock is commonly mapped near the surface in Annetta South. Crossings matter too, including FM 5, Turkey Creek, utilities to expose, and any pavement or concrete. Logistics add excavation time, pits and backfill, emergency or high profile work, and mobilization from Yukon, 232 road miles away.

Questions people ask about boring in Annetta South

Does Trinity take directional boring work in Annetta South, Parker County, and who staffs it?

Yes, we take directional boring work in Annetta South, Parker County. Our own crews and vetted partner contractor crews handle the field work, while you deal with Trinity from the first call through the bore log. For a route near FM 5, we review the location and scope before the bore plan is set.

What ground should I expect for a bore in Annetta South near Aledo soil?

The USDA soil survey maps Aledo soil across 22 percent of Annetta South, and clay is a common surface texture. At about 40 inches, bedrock is mapped as the dominant texture across 70 percent of the area. That mix can make the bore shift from sticky soil to slower rock drilling, so the route near Canyon Lake Drive needs a site specific plan.

Is there bedrock close to the surface in Annetta South?

Yes. The USDA soil survey maps bedrock within five feet across 86 percent of Annetta South, with hard bedrock in 71 percent and weathered bedrock in 15 percent. Typical mapped depth is 22 inches. Those are soil survey estimates, not test borings, but they signal that a route near FM 5 may need rock tooling.

Who approves a bore under Annetta South FM 5?

TxDOT reviews a utility owner’s permit request for work under FM 5 through its Fort Worth District. The utility owner files in the online RULIS system, and we prepare the bore plan and profile for that application. A crossing beneath FM 5 must meet the cover set by TxDOT’s rules or the depth specified in the permit.

Can a utility line be bored beneath Turkey Creek in Annetta South?

A bore can be planned beneath Turkey Creek, which runs 2.27 channel miles through Annetta South. The route needs a depth plan that stays below the channel, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. Site conditions and the proposed line determine the final design.

Which electric company serves my Annetta South, Parker County address?

County reports list Oncor Electric Delivery Company, Weatherford Municipal Utility System, Tri-County Electric Cooperative and Wise Electric Cooperative as reporting electric service. That does not show which one serves a particular Parker County address. Confirm the line owner and conduit specifications before planning a bore near Highland Drive.

How early should I call 811 for a bore on Annetta South Canyon Lake Drive?

Texas811 needs a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. Marks show line position, not depth. If a Canyon Lake Drive start slips more than 14 days past the original notice, make a new request; worn or moved marks must be refreshed through Texas811.

Does Aledo soil or the distance from Yukon change a bore in Annetta South?

Annetta South is 232 road miles and about a 4.7 hour drive from the Yukon, Oklahoma main office, so mobilization is part of the job plan. Aledo soil is mapped across 22 percent of town, and bedrock is common within five feet. Those conditions can affect tooling, time and the route near FM 5.

What affects the cost of directional boring in Annetta South near FM 5?

The scope sets the price: bore length and size, mapped bedrock, utility crossings, pavement, creek work, pits, backfill and excavator time all matter. A route under FM 5 can add highway planning, while Turkey Creek adds crossing considerations. Mobilization from the Yukon office also factors into work in Annetta South.

Where the Annetta South facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Annetta South

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Annetta South, Texas

Type the address of your job in Annetta South. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Annetta South

Same county: Weatherford · Briar · Springtown · Reno · Azle · Fort Worth · Western Lake · Dennis · Cresson · Horseshoe Bend · Peaster · Millsap. All counties: Texas county list.