Henderson Texas Directional Boring: Kirvin Soil, Hardy Creek, US 79
Quick Answer: We take directional boring, also called horizontal directional drilling (HDD), in Henderson, Texas, including routes beneath US 79. Main Street is among the city’s longest streets, and Henderson has 159.67 public road miles within its limits. The Yukon main office is 353 road miles away, with Hardy Creek among the local crossing considerations. Kirvin soil and sandy clay loam below the surface can make the bore sticky, so drilling fluid and reaming need to suit the ground.
Henderson bores at a glance
- County seat of Rusk County, Texas. Population 13,485 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 353 miles, about 6.9 hours of driving.
- Ground: Kirvin soil is mapped on 19 percent of the area, with sandy clay loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 31 percent of the area.
- Highways inside the boundary: US 79, US 259, US 79 Business, Texas State Highway 64 and Texas State Highway 43. State permit office: TxDOT Tyler District.
- Railroad track inside the boundary: a short line railroad (reporting mark HOB), with 7 mapped street and rail crossings.
- Named streams inside the boundary: Hardy Creek, Dutch Creek, Shawnee Creek and Adaway Creek.
- Public water: City of Henderson, surface water.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring near Hardy Creek in Henderson?
We take directional boring work in Henderson, the Rusk County seat, where the Census Bureau Vintage 2024 estimate puts the population at 13,485. Water, sewer, gas, electric conduit and fiber can be routed beneath Main Street, US 79 or other Henderson streets with a bore, depending on the route and site conditions.
Our main office is in Yukon, Oklahoma, and Henderson work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We handle jobs from 3/4 inch service lines to 48 inch casing, including short service bores and long crossings near Hardy Creek. Our family business began in 1965 and has done directional boring since 1982.

What is Henderson ground like to bore in Kirvin soil?
Kirvin soil is mapped across 19 percent of Henderson, while Kirvin fine sandy loam, 1 to 5 percent slopes, accounts for 12 percent of mapped area. The USDA soil survey maps fine sandy loam at the surface across 47 percent, with loamy fine sand across 28 percent. At about 40 inches, sandy clay loam is mapped across 48 percent and clay across 31 percent. These are mapped soil patterns, not test borings, so a specific route still needs site review.
| USDA soil survey, inside the Henderson city limits | What is mapped |
|---|---|
| Soil series mapped | Kirvin 19 percent, Bowie 16 percent, Cuthbert 15 percent, Lilbert 13 percent and Tenaha 11 percent |
| Texture at the surface | fine sandy loam 47 percent, loamy fine sand 28 percent and very fine sandy loam 11 percent |
| Texture about 40 inches down | sandy clay loam 48 percent, clay 31 percent and clay loam 15 percent |
| Engineering class about 40 inches down | lean clay (CL) 49 percent, fat clay (CH) 17 percent and silt (ML) 14 percent |
| Average clay content about 40 inches down | 33 percent |
| Bedrock mapped within 60 inches | 31 percent of the area (0 percent hard rock, 31 percent weathered rock) |
| Seasonal water table within 60 inches | 26 percent of the area |
| Flood prone soils | 7 percent of the area |
| High corrosion risk for uncoated steel | 54 percent of the area |
Weathered bedrock is mapped within 60 inches across 31 percent of Henderson, and typical bedrock depth is 41 inches. A seasonal water table is mapped within 60 inches across 26 percent; flood prone soils account for 7 percent, so Hardy Creek routes need attention to depth and pit drainage. High steel corrosion risk covers 54 percent. The geologic map includes Eocene Carrizo Sand, so local ground can change along a bore.
What does it take to bore Henderson’s sandy clay loam?
Henderson’s sandy clay loam and clay mapped below the surface call for a controlled bore, not one fixed fluid recipe. Around Hardy Creek, we also plan the route and pit locations for drainage and channel depth.
- Kirvin fine sandy loam overlies clay in parts of Henderson, so we adjust fluid and ream in stages to manage sticky cuttings and keep the hole ready for pipe.
- Near mapped heavy clay, including the sandy clay loam layer, we watch fluid returns and pressure so drilling does not lift pavement along streets such as Main Street.
- With weathered bedrock mapped within 60 inches in parts of Henderson, we check depth and steering closely as the bit moves between soil and harder material.
- For a proposed Hardy Creek crossing, we plan depth beneath the channel and consider pit drainage; mapped seasonal water tables make small, manageable pits useful.

Where might a line have to go under US 79 in Henderson?
A Henderson bore can pass beneath US 79, US 259, Texas State Highway 64, Texas State Highway 43 or other roads without cutting through the traveled pavement. Main Street runs 6.44 miles in the city, Evenside Street 3.05 miles and Marshall Street 2.61 miles, so routes may also involve long city street corridors. Loop 571 is 0.3 miles outside the limits. Road ownership and the right of way determine which approvals apply.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 79 | US highway | 9.9 roadway miles inside | State highway office |
| US 259 | US highway | 9.8 roadway miles inside | State highway office |
| US 79 Business | US highway | 2.6 roadway miles inside | State highway office |
| Texas State Highway 64 | State highway | 5.4 roadway miles inside | State highway office |
| Texas State Highway 43 | State highway | 3.3 roadway miles inside | State highway office |
| Texas State Highway 64 Business | State highway | 2.3 roadway miles inside | State highway office |
| FM 13 | State highway | 2.1 roadway miles inside | State highway office |
| FM 840 | State highway | 1.4 roadway miles inside | State highway office |
| Texas State Highway 322 | State highway | 1.1 roadway miles inside | State highway office |
| FM 3310 | State highway | 0.7 roadway miles inside | State highway office |
| FM 225 | State highway | 1.2 roadway miles inside | State highway office |
| FM 782 | State highway | 0.6 roadway miles inside | State highway office |
| FM 3135 | State highway | 0.3 roadway miles inside | State highway office |
| Loop 571 | Highway nearby | 0.3 miles outside | State highway office |
A short line railroad (reporting mark HOB) has 2.04 track miles inside Henderson, and public records map 7 street and rail crossings. A route over that track needs an agreement from its owner. Hardy Creek has 2.26 channel miles in the city, and public records map 12 street crossings of named streams. Willow Lake, West Lake and Lakeview Lake are also inside the limits, so water crossings need route planning.
Do I need a permit to bore in Henderson and Rusk County?
Henderson city streets are under city control, while work in the right of way of US 79, US 259, state highways or farm to market roads needs a TxDOT utility permit. Henderson is in the TxDOT Tyler District. The line owner, not our drilling crew, submits the application in TxDOT’s RULIS system; we prepare the bore plan and profile for the owner’s filing. A railroad route at the HOB track needs an agreement from the railroad owner. A Hardy Creek crossing is checked for Corps jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities are near the City of Henderson system?
The City of Henderson public water system uses surface water and reports 6,393 service connections serving 14,666 people. Electric service reported in Rusk County includes Oncor Electric Delivery Company, Southwestern Electric Power, Cherokee County Electric Cooperative Association, Deep East Texas Electric Cooperative, Rusk County Electric Cooperative and Upshur Rural Electric Cooperative. For an electric conduit bore near US 79, we confirm the line owner for the address before planning the route.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Henderson | Public water system | Surface water | 6,393 connections, 14,666 people served |
| Oncor Electric Delivery Company, Southwestern Electric Power, Cherokee County Electric Cooperative Association, Deep East Texas Electric Cooperative, Rusk County Electric Cooperative and Upshur Rural Electric Cooperative | Electric utilities reporting service in Rusk County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Henderson’s median housing year at 1972; 37 percent of homes predate 1960, while 12 percent were built in 2000 or later. That mix can mean replacement routes as well as new service work. Before drilling near marked lines, we hydrovac pothole each one on the path. For a proposed crossing under Evenside Street, potholing checks the marked line’s depth before the drill approaches.

Do you cover Henderson and nearby Longview?
Henderson is the Rusk County seat, 25.2 miles south of Longview, the nearest larger city. The incorporated city covers 11.99 square miles at an elevation of 485 feet, with ZIP codes 75652 and 75654. New London is 11.0 miles northwest; Overton is 13.2 miles northwest, and Kilgore is 17.0 miles north. Our Yukon, Oklahoma main office is 353 road miles away, a 6.9 hour drive, which matters when planning mobilization for a Henderson job.
Places near Henderson
- Directional boring in New London: 11 miles northwest
- Directional boring in Overton: 13.2 miles northwest
- Directional boring in Arp: 15.7 miles west
- Directional boring in Lake Cherokee: 16.4 miles northeast
- Directional boring in Kilgore: 17 miles north
- Directional boring in Longview: 25.2 miles north
Which jobs call for a bore near Main Street in Henderson?
- Highway crossing: A bore beneath US 79 can carry water or conduit without open cutting the pavement, with TxDOT requirements shaping the route.
- Water service: A connection near the City of Henderson system may need a route beneath Main Street or another paved street.
- Fiber route: A conduit bore along Evenside Street can avoid cutting pavement while passing marked utilities exposed along the planned path.
- Creek crossing: A line beneath Hardy Creek needs a route planned for channel depth and review for possible Corps jurisdiction.
- Rail crossing: A bore under the HOB track requires coordination with the railroad owner and an agreement for the crossing.
- Street replacement: A sewer or water replacement beneath Marshall Street can keep the roadway surface uncut while the line is installed.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I quote Henderson work near a short line railroad (reporting mark HOB)?
For a Henderson quote, send the address or map pin, what will go underground, the pipe or conduit size and footage; a sketch or plans help. A route near US 79, Hardy Creek or the HOB track gives us a useful starting point for checking access and crossings before we shape the bore plan.
Price follows the route and work involved. A straight service bore along Main Street in fine sandy loam can be simpler to plan than a route through sandy clay loam, across Hardy Creek or beneath the HOB track. Pipe size, footage, marked utilities to expose, pavement, pits and excavator time all affect the scope. The 353 road miles from Yukon can also affect mobilization, as can emergency timing or a high profile crossing.
Questions people ask about boring in Henderson
Does Trinity take directional boring jobs in Henderson, Rusk County, and who staffs them?
Yes, we take directional boring jobs in Henderson, Rusk County, and staff them with our own crews or partner contractor crews from vetted satellite yards. You work with Trinity through planning and the bore log regardless of which crew is on site. Routes may run beneath US 79 or local streets.
Who runs Henderson’s public water system, and where does its water come from?
The City of Henderson owns and runs its public water system, which uses surface water. It reports 6,393 service connections and 14,666 people served. For a bore near Main Street, the system’s presence is useful context, but the line location still has to be confirmed for the proposed route.
Which electric company owns a conduit line in Henderson, Rusk County?
The owner depends on the address and line; Rusk County electric providers reporting service include Oncor Electric Delivery Company and Southwestern Electric Power, among others. We confirm the actual line owner and conduit specifications before planning a bore, including a route near US 259.
Who controls Henderson streets like Marshall Street, and must we cut them?
Henderson’s incorporated city streets are controlled by the city itself. A bore beneath Marshall Street can place a line without cutting through the pavement, subject to the route and utility clearances. If the route enters a state highway right of way, TxDOT review applies instead.
How old are Henderson lines near Evenside Street, and what does that mean for replacement bores?
The American Community Survey 2019 to 2023 estimates put Henderson’s median housing year at 1972, with 37 percent built before 1960. Housing age does not establish buried line age, but it can point to replacement work as well as new service needs. A proposed Evenside Street route needs utility locating and potholing.
Can groundwater or flood prone ground affect bore pits near Hardy Creek in Henderson?
It can. The USDA soil survey maps a seasonal water table within 60 inches across 26 percent of Henderson and flood prone soils across 7 percent. Near Hardy Creek, we account for channel depth and pit drainage in the plan, and check whether the crossing falls under Corps jurisdiction.
What bore sizes and lengths can Trinity handle for a Henderson job near Kilgore Drive?
We handle 3/4 inch service lines through 48 inch casing, with bore lengths from 10 feet to 5,000 feet. The right size and length depend on the line and route, whether the work is a short connection near Kilgore Drive or a longer crossing elsewhere in Henderson.
How early should I request a Henderson locate near Main Street, and what if marks move?
For a bore near Main Street, make the Texas811 request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If the start slips more than 14 days past the original notice, make a new request. Worn or moved marks must be refreshed through Texas811 before work resumes.
What affects the price of a directional bore near US 79 in Henderson?
The route and scope set the price, not one feature alone. Pipe size and footage, Henderson’s sandy clay loam, pavement near US 79, utilities to expose, pits, creek crossings and excavator time all affect the work. The 353 road miles from Yukon can also affect mobilization.
Where the Henderson facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Henderson
- U.S. Census Bureau, TIGER/Line 2024: Henderson boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Henderson
- U.S. Census Bureau, American Community Survey 2019 to 2023: Henderson housing units and year built
- Macrostrat geologic map compilation: map units under Henderson
- U.S. EPA Safe Drinking Water Information System: public water systems serving Henderson
- U.S. Department of Transportation, North American Rail Network: track owners in Rusk County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Rusk County
- U.S. Geological Survey, Elevation Point Query Service: Henderson elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Henderson
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Henderson
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Henderson, Texas
Type the address of your job in Henderson. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Henderson
Same county: Tatum · Mount Enterprise · Reklaw · Easton. All counties: Texas county list.
